am335x_evm / gumstix pepper: Correct DDR settings
As noted by clang, we have been shifting certain values out of 32bit
range when setting some DDR registers. Upon further inspection these
had been touching reserved fields (and having no impact). These came in
from historical bring-up code and can be discarded. Similarly, we had
been declaring some fields as 0 when they will be initialized that way.
Tested on Beaglebone White.
Reported-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Cc: Ash Charles <ash@gumstix.com>
Signed-off-by: Tom Rini <trini@ti.com>
Tested-By: Ash Charles <ashcharles@gmail.com>
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index da780ed..d81eec9 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -84,41 +84,17 @@
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
static const struct ddr_data ddr2_data = {
- .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
- (MT47H128M16RT25E_RD_DQS<<20) |
- (MT47H128M16RT25E_RD_DQS<<10) |
- (MT47H128M16RT25E_RD_DQS<<0)),
- .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
- (MT47H128M16RT25E_WR_DQS<<20) |
- (MT47H128M16RT25E_WR_DQS<<10) |
- (MT47H128M16RT25E_WR_DQS<<0)),
- .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
- (MT47H128M16RT25E_PHY_WRLVL<<20) |
- (MT47H128M16RT25E_PHY_WRLVL<<10) |
- (MT47H128M16RT25E_PHY_WRLVL<<0)),
- .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
- (MT47H128M16RT25E_PHY_GATELVL<<20) |
- (MT47H128M16RT25E_PHY_GATELVL<<10) |
- (MT47H128M16RT25E_PHY_GATELVL<<0)),
- .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
- (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
- (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
- (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
- .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
- (MT47H128M16RT25E_PHY_WR_DATA<<20) |
- (MT47H128M16RT25E_PHY_WR_DATA<<10) |
- (MT47H128M16RT25E_PHY_WR_DATA<<0)),
+ .datardsratio0 = MT47H128M16RT25E_RD_DQS,
+ .datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE,
+ .datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA,
};
static const struct cmd_control ddr2_cmd_ctrl_data = {
.cmd0csratio = MT47H128M16RT25E_RATIO,
- .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd1csratio = MT47H128M16RT25E_RATIO,
- .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd2csratio = MT47H128M16RT25E_RATIO,
- .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
};
static const struct emif_regs ddr2_emif_reg_data = {