omap_gpmc: move prefetch out of CONFIG_NAND_OMAP_ELM
The prefech mode is a feature of the gpmc, not the ELM. An am3517
does not have an elm, but can do prefeches, so move the code out
of the CONFIG_NAND_OMAP_ELM ifdef.
Cc: Scott Wood <scottwood@freescale.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Daniel Mack <zonque@gmail.com>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 610f969..de90d55 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -340,6 +340,115 @@
return 0;
}
+#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH
+
+#define PREFETCH_CONFIG1_CS_SHIFT 24
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define ENABLE_PREFETCH (1 << 7)
+
+/**
+ * omap_prefetch_enable - configures and starts prefetch transfer
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ * @cs: chip select to use
+ */
+static int omap_prefetch_enable(int fifo_th, unsigned int count, int is_write, int cs)
+{
+ uint32_t val;
+
+ if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
+ return -EINVAL;
+
+ if (readl(&gpmc_cfg->prefetch_control))
+ return -EBUSY;
+
+ /* Set the amount of bytes to be prefetched */
+ writel(count, &gpmc_cfg->prefetch_config2);
+
+ val = (cs << PREFETCH_CONFIG1_CS_SHIFT) | (is_write & 1) |
+ PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH;
+ writel(val, &gpmc_cfg->prefetch_config1);
+
+ /* Start the prefetch engine */
+ writel(1, &gpmc_cfg->prefetch_control);
+
+ return 0;
+}
+
+/**
+ * omap_prefetch_reset - disables and stops the prefetch engine
+ */
+static void omap_prefetch_reset(void)
+{
+ writel(0, &gpmc_cfg->prefetch_control);
+ writel(0, &gpmc_cfg->prefetch_config1);
+}
+
+static int __read_prefetch_aligned(struct nand_chip *chip, uint32_t *buf, int len)
+{
+ int ret;
+ uint32_t cnt;
+ struct omap_nand_info *info = chip->priv;
+
+ ret = omap_prefetch_enable(PREFETCH_FIFOTHRESHOLD_MAX, len, 0, info->cs);
+ if (ret < 0)
+ return ret;
+
+ do {
+ int i;
+
+ cnt = readl(&gpmc_cfg->prefetch_status);
+ cnt = PREFETCH_STATUS_FIFO_CNT(cnt);
+
+ for (i = 0; i < cnt / 4; i++) {
+ *buf++ = readl(CONFIG_SYS_NAND_BASE);
+ len -= 4;
+ }
+ } while (len);
+
+ omap_prefetch_reset();
+
+ return 0;
+}
+
+static void omap_nand_read_prefetch8(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int ret;
+ uint32_t head, tail;
+ struct nand_chip *chip = mtd->priv;
+
+ /*
+ * If the destination buffer is unaligned, start with reading
+ * the overlap byte-wise.
+ */
+ head = ((uint32_t) buf) % 4;
+ if (head) {
+ nand_read_buf(mtd, buf, head);
+ buf += head;
+ len -= head;
+ }
+
+ /*
+ * Only transfer multiples of 4 bytes in a pre-fetched fashion.
+ * If there's a residue, care for it byte-wise afterwards.
+ */
+ tail = len % 4;
+
+ ret = __read_prefetch_aligned(chip, (uint32_t *) buf, len - tail);
+ if (ret < 0) {
+ /* fallback in case the prefetch engine is busy */
+ nand_read_buf(mtd, buf, len);
+ } else if (tail) {
+ buf += len - tail;
+ nand_read_buf(mtd, buf, tail);
+ }
+}
+#endif /* CONFIG_NAND_OMAP_GPMC_PREFETCH */
+
#ifdef CONFIG_NAND_OMAP_ELM
/*
* omap_reverse_list - re-orders list elements in reverse order [internal]
@@ -452,115 +561,6 @@
return (err) ? err : error_count;
}
-#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH
-
-#define PREFETCH_CONFIG1_CS_SHIFT 24
-#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
-#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
-#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
-#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
-#define ENABLE_PREFETCH (1 << 7)
-
-/**
- * omap_prefetch_enable - configures and starts prefetch transfer
- * @fifo_th: fifo threshold to be used for read/ write
- * @count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- * @cs: chip select to use
- */
-static int omap_prefetch_enable(int fifo_th, unsigned int count, int is_write, int cs)
-{
- uint32_t val;
-
- if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
- return -EINVAL;
-
- if (readl(&gpmc_cfg->prefetch_control))
- return -EBUSY;
-
- /* Set the amount of bytes to be prefetched */
- writel(count, &gpmc_cfg->prefetch_config2);
-
- val = (cs << PREFETCH_CONFIG1_CS_SHIFT) | (is_write & 1) |
- PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH;
- writel(val, &gpmc_cfg->prefetch_config1);
-
- /* Start the prefetch engine */
- writel(1, &gpmc_cfg->prefetch_control);
-
- return 0;
-}
-
-/**
- * omap_prefetch_reset - disables and stops the prefetch engine
- */
-static void omap_prefetch_reset(void)
-{
- writel(0, &gpmc_cfg->prefetch_control);
- writel(0, &gpmc_cfg->prefetch_config1);
-}
-
-static int __read_prefetch_aligned(struct nand_chip *chip, uint32_t *buf, int len)
-{
- int ret;
- uint32_t cnt;
- struct omap_nand_info *info = chip->priv;
-
- ret = omap_prefetch_enable(PREFETCH_FIFOTHRESHOLD_MAX, len, 0, info->cs);
- if (ret < 0)
- return ret;
-
- do {
- int i;
-
- cnt = readl(&gpmc_cfg->prefetch_status);
- cnt = PREFETCH_STATUS_FIFO_CNT(cnt);
-
- for (i = 0; i < cnt / 4; i++) {
- *buf++ = readl(CONFIG_SYS_NAND_BASE);
- len -= 4;
- }
- } while (len);
-
- omap_prefetch_reset();
-
- return 0;
-}
-
-static void omap_nand_read_prefetch8(struct mtd_info *mtd, uint8_t *buf, int len)
-{
- int ret;
- uint32_t head, tail;
- struct nand_chip *chip = mtd->priv;
-
- /*
- * If the destination buffer is unaligned, start with reading
- * the overlap byte-wise.
- */
- head = ((uint32_t) buf) % 4;
- if (head) {
- nand_read_buf(mtd, buf, head);
- buf += head;
- len -= head;
- }
-
- /*
- * Only transfer multiples of 4 bytes in a pre-fetched fashion.
- * If there's a residue, care for it byte-wise afterwards.
- */
- tail = len % 4;
-
- ret = __read_prefetch_aligned(chip, (uint32_t *) buf, len - tail);
- if (ret < 0) {
- /* fallback in case the prefetch engine is busy */
- nand_read_buf(mtd, buf, len);
- } else if (tail) {
- buf += len - tail;
- nand_read_buf(mtd, buf, tail);
- }
-}
-#endif /* CONFIG_NAND_OMAP_GPMC_PREFETCH */
-
/**
* omap_read_page_bch - hardware ecc based page read function
* @mtd: mtd info structure