imx: mx6ul: Update imx registers head file
1. Update imx register base address for i.MX6UL.
2. Remove duplicated MXS_APBH/GPMI/BCH_BASE.
3. Remove #ifdef for register addresses that equal to
"AIPS2_OFF_BASE_ADDR + 0x34000" for different chips.
4. According fuse map, complete fuse_bank4_regs.
5. Move AIPS3_ARB_BASE_ADDR and AIPS3_ARB_END_ADDR out of #ifdef CONFIG_MX6SX,
because we can use runtime check
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 35a324c..d8b5d6f 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -19,7 +19,7 @@
#define GPU_2D_ARB_END_ADDR 0x02203FFF
#define OPENVG_ARB_BASE_ADDR 0x02204000
#define OPENVG_ARB_END_ADDR 0x02207FFF
-#elif CONFIG_MX6SX
+#elif (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define CAAM_ARB_BASE_ADDR 0x00100000
#define CAAM_ARB_END_ADDR 0x00107FFF
#define GPU_ARB_BASE_ADDR 0x01800000
@@ -28,10 +28,6 @@
#define APBH_DMA_ARB_END_ADDR 0x0180BFFF
#define M4_BOOTROM_BASE_ADDR 0x007F8000
-#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR
-#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000)
-#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
-
#else
#define CAAM_ARB_BASE_ADDR 0x00100000
#define CAAM_ARB_END_ADDR 0x00103FFF
@@ -52,13 +48,13 @@
#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000)
/* GPV - PL301 configuration ports */
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define GPV2_BASE_ADDR 0x00D00000
#else
#define GPV2_BASE_ADDR 0x00200000
#endif
-#ifdef CONFIG_MX6SX
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define GPV3_BASE_ADDR 0x00E00000
#define GPV4_BASE_ADDR 0x00F00000
#define GPV5_BASE_ADDR 0x01000000
@@ -87,15 +83,21 @@
#define AIPS1_ARB_END_ADDR 0x020FFFFF
#define AIPS2_ARB_BASE_ADDR 0x02100000
#define AIPS2_ARB_END_ADDR 0x021FFFFF
-#ifdef CONFIG_MX6SX
+/* AIPS3 only on i.MX6SX */
#define AIPS3_ARB_BASE_ADDR 0x02200000
#define AIPS3_ARB_END_ADDR 0x022FFFFF
+#ifdef CONFIG_MX6SX
#define WEIM_ARB_BASE_ADDR 0x50000000
#define WEIM_ARB_END_ADDR 0x57FFFFFF
#define QSPI0_AMBA_BASE 0x60000000
#define QSPI0_AMBA_END 0x6FFFFFFF
#define QSPI1_AMBA_BASE 0x70000000
#define QSPI1_AMBA_END 0x7FFFFFFF
+#elif defined(CONFIG_MX6UL)
+#define WEIM_ARB_BASE_ADDR 0x50000000
+#define WEIM_ARB_END_ADDR 0x57FFFFFF
+#define QSPI0_AMBA_BASE 0x60000000
+#define QSPI0_AMBA_END 0x6FFFFFFF
#else
#define SATA_ARB_BASE_ADDR 0x02200000
#define SATA_ARB_END_ADDR 0x02203FFF
@@ -111,7 +113,7 @@
#define WEIM_ARB_END_ADDR 0x0FFFFFFF
#endif
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define MMDC0_ARB_BASE_ADDR 0x80000000
#define MMDC0_ARB_END_ADDR 0xFFFFFFFF
#define MMDC1_ARB_BASE_ADDR 0xC0000000
@@ -238,13 +240,16 @@
#define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000)
#define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000)
#define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000)
-#ifdef CONFIG_MX6SL
+/* i.MX6SL */
#define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
-#elif CONFIG_MX6SX
-#define ENET2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+#ifdef CONFIG_MX6UL
+#define ENET2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x34000)
#else
-#define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
+/* i.MX6SX */
+#define ENET2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
#endif
+/* i.MX6DQ/SDL */
+#define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000)
#define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000)
#define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000)
@@ -257,22 +262,21 @@
#define IP2APB_PERFMON3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000)
#endif
#define IP2APB_TZASC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x50000)
-#ifdef CONFIG_MX6SX
+#ifdef CONFIG_MX6UL
+#define QSPI0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000)
+#elif defined(CONFIG_MX6SX)
#define SAI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000)
-#else
-#define IP2APB_TZASC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000)
-#endif
#define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000)
-#define AUDMUX_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x58000)
-#ifdef CONFIG_MX6SX
#define SAI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000)
#define QSPI0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000)
#define QSPI1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000)
#else
+#define IP2APB_TZASC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x54000)
#define MIPI_CSI2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x5C000)
#define MIPI_DSI_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x60000)
#define VDOA_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000)
#endif
+#define MX6UL_WDOG3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x64000)
#define UART2_BASE (AIPS2_OFF_BASE_ADDR + 0x68000)
#define UART3_BASE (AIPS2_OFF_BASE_ADDR + 0x6C000)
#define UART4_BASE (AIPS2_OFF_BASE_ADDR + 0x70000)
@@ -296,7 +300,6 @@
#define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000)
#define ADC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000)
#define ADC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000)
-#define WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
#define ECSPI5_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x8C000)
#define HS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x90000)
#define MU_MCU_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x94000)
@@ -308,12 +311,17 @@
#define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000)
#define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000)
#endif
+#define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
+
+/* only for i.MX6SX/UL */
+#define WDOG3_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL) ? \
+ MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR)
#define CHIP_REV_1_0 0x10
#define CHIP_REV_1_2 0x12
#define CHIP_REV_1_5 0x15
#define CHIP_REV_2_0 0x20
-#ifndef CONFIG_MX6SX
+#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
#define IRAM_SIZE 0x00040000
#else
#define IRAM_SIZE 0x00020000
@@ -451,7 +459,7 @@
struct iomuxc {
-#ifdef CONFIG_MX6SX
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
u8 reserved[0x4000];
#endif
u32 gpr[14];
@@ -577,7 +585,7 @@
#define MXC_CSPICON_POL 4 /* SCLK polarity */
#define MXC_CSPICON_SSPOL 12 /* SS polarity */
#define MXC_CSPICON_CTL 20 /* inactive state of SCLK */
-#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL)
+#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
#define MXC_SPI_BASE_ADDRESSES \
ECSPI1_BASE_ADDR, \
ECSPI2_BASE_ADDR, \
@@ -661,7 +669,7 @@
u32 rsvd7[3];
};
-#ifdef CONFIG_MX6SX
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
struct fuse_bank4_regs {
u32 sjc_resp_low;
u32 rsvd0[3];
@@ -674,7 +682,9 @@
u32 mac_addr2;
u32 rsvd4[7];
u32 gp1;
- u32 rsvd5[7];
+ u32 rsvd5[3];
+ u32 gp2;
+ u32 rsvd6[3];
};
#else
struct fuse_bank4_regs {