ARM: tegra: pinmux: move some type definitions
On some future SoCs, some per-drive-group features became per-pin
features. Move all type definitions early in the header so they can
be enabled irrespective of the setting of TEGRA_PMX_SOC_HAS_DRVGRPS.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/include/asm/arch-tegra/pinmux.h b/arch/arm/include/asm/arch-tegra/pinmux.h
index cb61aa1..1562fa4 100644
--- a/arch/arm/include/asm/arch-tegra/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra/pinmux.h
@@ -63,6 +63,35 @@
};
#endif
+#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
+/* Defines a pin group cfg's low-power mode select */
+enum pmux_lpmd {
+ PMUX_LPMD_X8 = 0,
+ PMUX_LPMD_X4,
+ PMUX_LPMD_X2,
+ PMUX_LPMD_X,
+ PMUX_LPMD_NONE = -1,
+};
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pmux_schmt {
+ PMUX_SCHMT_DISABLE = 0,
+ PMUX_SCHMT_ENABLE = 1,
+ PMUX_SCHMT_NONE = -1,
+};
+#endif
+
+#ifdef TEGRA_PMX_GRPS_HAVE_HSM
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pmux_hsm {
+ PMUX_HSM_DISABLE = 0,
+ PMUX_HSM_ENABLE = 1,
+ PMUX_HSM_NONE = -1,
+};
+#endif
+
/*
* This defines the configuration for a pin, including the function assigned,
* pull up/down settings and tristate settings. Having set up one of these
@@ -142,35 +171,6 @@
#define PMUX_DRVDN_MAX 127
#define PMUX_DRVDN_NONE -1
-#ifdef TEGRA_PMX_GRPS_HAVE_LPMD
-/* Defines a pin group cfg's low-power mode select */
-enum pmux_lpmd {
- PMUX_LPMD_X8 = 0,
- PMUX_LPMD_X4,
- PMUX_LPMD_X2,
- PMUX_LPMD_X,
- PMUX_LPMD_NONE = -1,
-};
-#endif
-
-#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
-/* Defines whether a pin group cfg's schmidt is enabled or not */
-enum pmux_schmt {
- PMUX_SCHMT_DISABLE = 0,
- PMUX_SCHMT_ENABLE = 1,
- PMUX_SCHMT_NONE = -1,
-};
-#endif
-
-#ifdef TEGRA_PMX_GRPS_HAVE_HSM
-/* Defines whether a pin group cfg's high-speed mode is enabled or not */
-enum pmux_hsm {
- PMUX_HSM_DISABLE = 0,
- PMUX_HSM_ENABLE = 1,
- PMUX_HSM_NONE = -1,
-};
-#endif
-
/*
* This defines the configuration for a pin group's pad control config
*/