Convert CONFIG_SPL_NAND_RAW_ONLY et al to Kconfig
This converts the following to Kconfig:
CONFIG_SPL_NAND_RAW_ONLY
CONFIG_SPL_NAND_SOFTECC
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/README b/README
index 484a2c5..0fd92cf 100644
--- a/README
+++ b/README
@@ -1743,10 +1743,6 @@
Support for a lightweight UBI (fastmap) scanner and
loader
- CONFIG_SPL_NAND_RAW_ONLY
- Support to boot only raw u-boot.bin images. Use this only
- if you need to save space.
-
CONFIG_SPL_COMMON_INIT_DDR
Set for common ddr init with serial presence detect in
SPL binary.
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 4268121..b45607b 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -763,13 +763,23 @@
This enables the drivers in drivers/mtd/nand/raw as part of an SPL
build.
+config SPL_NAND_RAW_ONLY
+ bool "Support to boot only raw u-boot.bin images"
+ depends on SPL_NAND_SUPPORT
+ help
+ Use this only if you need to save space.
+
config SPL_NAND_DRIVERS
bool "Use standard NAND driver"
help
SPL uses normal NAND drivers, not minimal drivers.
config SPL_NAND_ECC
- bool "Include standard software ECC in the SPL"
+ bool "Include standard ECC in SPL"
+
+config SPL_NAND_SOFTECC
+ bool "Use software ECC in SPL"
+ depends on SPL_NAND_ECC
config SPL_NAND_SIMPLE
bool "Support simple NAND drivers in SPL"
diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index d17cdd2..ebda5a4 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -39,8 +39,10 @@
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CRC32=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_HUSH_PARSER=y
diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 443f15e..9b55d9e 100644
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -32,8 +32,10 @@
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
CONFIG_SPL_NAND_BASE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
index 71e80e8..5b25463 100644
--- a/configs/devkit3250_defconfig
+++ b/configs/devkit3250_defconfig
@@ -26,8 +26,10 @@
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_GPIO=y
diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig
index 0dbd084..2ee7163 100644
--- a/configs/gardena-smart-gateway-at91sam_defconfig
+++ b/configs/gardena-smart-gateway-at91sam_defconfig
@@ -35,6 +35,7 @@
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_BASE=y
CONFIG_HUSH_PARSER=y
diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index a9f90e9..b3c6d23 100644
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -33,8 +33,10 @@
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
CONFIG_SPL_NAND_BASE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 90f9133..8bc5afd 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -43,8 +43,10 @@
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_CRC32=y
CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_HUSH_PARSER=y
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 38b9061..2930d7a 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -56,7 +56,6 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
#define CONFIG_SYS_NAND_ECCSIZE 256
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 4809b59..b4fef73 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -63,8 +63,6 @@
#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE
#define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K)
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 93a704c..d2a760e 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -97,11 +97,6 @@
/* SPL will use serial */
-/* SPL loads an image from NAND */
-#define CONFIG_SPL_NAND_RAW_ONLY
-
-#define CONFIG_SPL_NAND_SOFTECC
-
#define CONFIG_SPL_MAX_SIZE 0x20000
#define CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE
diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index 5e6a8ee..3e99d2c 100644
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -51,7 +51,6 @@
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
-#define CONFIG_SPL_NAND_RAW_ONLY
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index b858aaa..658b8a7 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -61,7 +61,6 @@
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
#define CONFIG_SYS_NAND_ECCSIZE 256
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index b51a520..d58d76d 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -126,8 +126,6 @@
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 77d80bf..768bfc6 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -152,8 +152,6 @@
#define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512)
#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_SOFTECC
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE