fsl_sec: Add hardware accelerated SHA256 and SHA1

SHA-256 and SHA-1 accelerated using SEC hardware in Freescale SoC's
The driver for SEC (CAAM) IP is based on linux drivers/crypto/caam.
The platforms needto add the MACRO CONFIG_FSL_CAAM inorder to
enable initialization of this hardware IP.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index bf9fbbf..963e326 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -27,6 +27,9 @@
 #include <hwconfig.h>
 #include <linux/compiler.h>
 #include "mp.h"
+#ifdef CONFIG_FSL_CAAM
+#include <fsl_sec.h>
+#endif
 #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #include <nand.h>
 #include <errno.h>
@@ -938,6 +941,10 @@
 	fman_enet_init();
 #endif
 
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+
 #if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
 	/*
 	 * For P1022/1013 Rev1.0 silicon, after power on SATA host
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index e426314..88c1e08 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2875,6 +2875,7 @@
 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET		0x220000
 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET		0x221000
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x300000
+#define CONFIG_SYS_FSL_JR0_OFFSET		0x301000
 #define CONFIG_SYS_FSL_CORENET_PME_OFFSET	0x316000
 #define CONFIG_SYS_FSL_QMAN_OFFSET		0x318000
 #define CONFIG_SYS_FSL_BMAN_OFFSET		0x31a000
@@ -2935,8 +2936,10 @@
 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET		0x2e000
 #if defined(CONFIG_PPC_C29X)
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x80000
+#define CONFIG_SYS_FSL_JR0_OFFSET               0x81000
 #else
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x30000
+#define CONFIG_SYS_FSL_JR0_OFFSET               0x31000
 #endif
 #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET	0xE3100
 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET	0xE3000
@@ -3041,6 +3044,8 @@
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET)
 #define CONFIG_SYS_FSL_SEC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
+#define CONFIG_SYS_FSL_JR0_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
 #define CONFIG_SYS_FSL_FM1_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_OFFSET)
 #define CONFIG_SYS_FSL_FM1_DTSEC1_ADDR \
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index b27a6b7..b29ce79 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -41,8 +41,12 @@
 
 #define BITS_PER_LONG 32
 
+#ifdef CONFIG_PHYS_64BIT
+typedef unsigned long long dma_addr_t;
+#else
 /* DMA addresses are 32-bits wide */
 typedef u32 dma_addr_t;
+#endif
 
 #ifdef CONFIG_PHYS_64BIT
 typedef unsigned long long phys_addr_t;