commit b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8
author Jagan Teki <jagan@amarulasolutions.com> Sun Aug 05 00:40:10 2018 +0530
committer Jagan Teki <jagan@amarulasolutions.com> Fri Sep 28 22:09:24 2018 +0530
tree ff3c8e396bea36b755ec3ca7bc6eca9156568e58
parent d1d4295aab97306454254989c8080f5093360af4

ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3

Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5
Author: Stefan Mavrodiev <stefan@olimex.com>
Date:   Wed May 16 14:38:08 2018 +0300

    ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board

Note:
- Update sun7i-a20-primo73.dts as per Linux, since
  this dts is U-Boot specific.
- Drop sun7i-a20-olimex-som-evb-emmc.dts since no board
  added for this.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

arch/arm/dts/sun7i-a20-olimex-som204-evb.dts

diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
index c183920..3d7b5c8 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
@@ -32,6 +32,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -65,6 +76,12 @@
 	status = "okay";
 };
 
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
 &codec {
 	status = "okay";
 };
@@ -73,6 +90,10 @@
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -98,6 +119,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -141,8 +172,7 @@
 	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -181,6 +211,14 @@
 
 #include "axp209.dtsi"
 
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
 &reg_ahci_5v {
 	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";