tbs2910: explicitly set boot address
Set missing boot address in bootm command. This fixes the error:
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Reported-by: Uwe Scheffler <scheffler.u@web.de>
Signed-off-by: Soeren Moch <smoch@web.de>
Tested-by: Uwe Scheffler <scheffler.u@web.de>
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 70b4403..4534695 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -190,7 +190,7 @@
"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
"rdinit=/sbin/init enable_wait_mode=off\0" \
"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
- "mmc read 0x10800000 0x800 0x4000; bootm\0" \
+ "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
"run bootargs_upd; " \