mtd: nand: Add core infrastructure to deal with NAND devices
Add an intermediate layer to abstract NAND device interface so that
some logic can be shared between SPI NANDs, parallel/raw NANDs,
OneNANDs, ...
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jagan Teki <jagan@openedev.com>
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 6d53734..1c1a1f4 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1 +1,4 @@
+config MTD_NAND_CORE
+ tristate
+
source "drivers/mtd/nand/raw/Kconfig"
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 69f40d1..cd492db 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,2 +1,4 @@
# SPDX-License-Identifier: GPL-2.0+
+nandcore-objs := core.o bbt.o
+obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
diff --git a/drivers/mtd/nand/bbt.c b/drivers/mtd/nand/bbt.c
new file mode 100644
index 0000000..7e0ad31
--- /dev/null
+++ b/drivers/mtd/nand/bbt.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Free Electrons
+ *
+ * Authors:
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ * Peter Pan <peterpandong@micron.com>
+ */
+
+#define pr_fmt(fmt) "nand-bbt: " fmt
+
+#include <linux/mtd/nand.h>
+#ifndef __UBOOT__
+#include <linux/slab.h>
+#endif
+
+/**
+ * nanddev_bbt_init() - Initialize the BBT (Bad Block Table)
+ * @nand: NAND device
+ *
+ * Initialize the in-memory BBT.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_bbt_init(struct nand_device *nand)
+{
+ unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+ unsigned int nblocks = nanddev_neraseblocks(nand);
+ unsigned int nwords = DIV_ROUND_UP(nblocks * bits_per_block,
+ BITS_PER_LONG);
+
+ nand->bbt.cache = kzalloc(nwords, GFP_KERNEL);
+ if (!nand->bbt.cache)
+ return -ENOMEM;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_init);
+
+/**
+ * nanddev_bbt_cleanup() - Cleanup the BBT (Bad Block Table)
+ * @nand: NAND device
+ *
+ * Undoes what has been done in nanddev_bbt_init()
+ */
+void nanddev_bbt_cleanup(struct nand_device *nand)
+{
+ kfree(nand->bbt.cache);
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_cleanup);
+
+/**
+ * nanddev_bbt_update() - Update a BBT
+ * @nand: nand device
+ *
+ * Update the BBT. Currently a NOP function since on-flash bbt is not yet
+ * supported.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_bbt_update(struct nand_device *nand)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_update);
+
+/**
+ * nanddev_bbt_get_block_status() - Return the status of an eraseblock
+ * @nand: nand device
+ * @entry: the BBT entry
+ *
+ * Return: a positive number nand_bbt_block_status status or -%ERANGE if @entry
+ * is bigger than the BBT size.
+ */
+int nanddev_bbt_get_block_status(const struct nand_device *nand,
+ unsigned int entry)
+{
+ unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+ unsigned long *pos = nand->bbt.cache +
+ ((entry * bits_per_block) / BITS_PER_LONG);
+ unsigned int offs = (entry * bits_per_block) % BITS_PER_LONG;
+ unsigned long status;
+
+ if (entry >= nanddev_neraseblocks(nand))
+ return -ERANGE;
+
+ status = pos[0] >> offs;
+ if (bits_per_block + offs > BITS_PER_LONG)
+ status |= pos[1] << (BITS_PER_LONG - offs);
+
+ return status & GENMASK(bits_per_block - 1, 0);
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_get_block_status);
+
+/**
+ * nanddev_bbt_set_block_status() - Update the status of an eraseblock in the
+ * in-memory BBT
+ * @nand: nand device
+ * @entry: the BBT entry to update
+ * @status: the new status
+ *
+ * Update an entry of the in-memory BBT. If you want to push the updated BBT
+ * the NAND you should call nanddev_bbt_update().
+ *
+ * Return: 0 in case of success or -%ERANGE if @entry is bigger than the BBT
+ * size.
+ */
+int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry,
+ enum nand_bbt_block_status status)
+{
+ unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+ unsigned long *pos = nand->bbt.cache +
+ ((entry * bits_per_block) / BITS_PER_LONG);
+ unsigned int offs = (entry * bits_per_block) % BITS_PER_LONG;
+ unsigned long val = status & GENMASK(bits_per_block - 1, 0);
+
+ if (entry >= nanddev_neraseblocks(nand))
+ return -ERANGE;
+
+ pos[0] &= ~GENMASK(offs + bits_per_block - 1, offs);
+ pos[0] |= val << offs;
+
+ if (bits_per_block + offs > BITS_PER_LONG) {
+ unsigned int rbits = bits_per_block + offs - BITS_PER_LONG;
+
+ pos[1] &= ~GENMASK(rbits - 1, 0);
+ pos[1] |= val >> rbits;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_set_block_status);
diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
new file mode 100644
index 0000000..0b79369
--- /dev/null
+++ b/drivers/mtd/nand/core.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Free Electrons
+ *
+ * Authors:
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ * Peter Pan <peterpandong@micron.com>
+ */
+
+#define pr_fmt(fmt) "nand: " fmt
+
+#ifndef __UBOOT__
+#include <linux/module.h>
+#endif
+#include <linux/mtd/nand.h>
+
+/**
+ * nanddev_isbad() - Check if a block is bad
+ * @nand: NAND device
+ * @pos: position pointing to the block we want to check
+ *
+ * Return: true if the block is bad, false otherwise.
+ */
+bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+ if (nanddev_bbt_is_initialized(nand)) {
+ unsigned int entry;
+ int status;
+
+ entry = nanddev_bbt_pos_to_entry(nand, pos);
+ status = nanddev_bbt_get_block_status(nand, entry);
+ /* Lazy block status retrieval */
+ if (status == NAND_BBT_BLOCK_STATUS_UNKNOWN) {
+ if (nand->ops->isbad(nand, pos))
+ status = NAND_BBT_BLOCK_FACTORY_BAD;
+ else
+ status = NAND_BBT_BLOCK_GOOD;
+
+ nanddev_bbt_set_block_status(nand, entry, status);
+ }
+
+ if (status == NAND_BBT_BLOCK_WORN ||
+ status == NAND_BBT_BLOCK_FACTORY_BAD)
+ return true;
+
+ return false;
+ }
+
+ return nand->ops->isbad(nand, pos);
+}
+EXPORT_SYMBOL_GPL(nanddev_isbad);
+
+/**
+ * nanddev_markbad() - Mark a block as bad
+ * @nand: NAND device
+ * @pos: position of the block to mark bad
+ *
+ * Mark a block bad. This function is updating the BBT if available and
+ * calls the low-level markbad hook (nand->ops->markbad()).
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+ unsigned int entry;
+ int ret = 0;
+
+ if (nanddev_isbad(nand, pos))
+ return 0;
+
+ ret = nand->ops->markbad(nand, pos);
+ if (ret)
+ pr_warn("failed to write BBM to block @%llx (err = %d)\n",
+ nanddev_pos_to_offs(nand, pos), ret);
+
+ if (!nanddev_bbt_is_initialized(nand))
+ goto out;
+
+ entry = nanddev_bbt_pos_to_entry(nand, pos);
+ ret = nanddev_bbt_set_block_status(nand, entry, NAND_BBT_BLOCK_WORN);
+ if (ret)
+ goto out;
+
+ ret = nanddev_bbt_update(nand);
+
+out:
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(nanddev_markbad);
+
+/**
+ * nanddev_isreserved() - Check whether an eraseblock is reserved or not
+ * @nand: NAND device
+ * @pos: NAND position to test
+ *
+ * Checks whether the eraseblock pointed by @pos is reserved or not.
+ *
+ * Return: true if the eraseblock is reserved, false otherwise.
+ */
+bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos)
+{
+ unsigned int entry;
+ int status;
+
+ if (!nanddev_bbt_is_initialized(nand))
+ return false;
+
+ /* Return info from the table */
+ entry = nanddev_bbt_pos_to_entry(nand, pos);
+ status = nanddev_bbt_get_block_status(nand, entry);
+ return status == NAND_BBT_BLOCK_RESERVED;
+}
+EXPORT_SYMBOL_GPL(nanddev_isreserved);
+
+/**
+ * nanddev_erase() - Erase a NAND portion
+ * @nand: NAND device
+ * @pos: position of the block to erase
+ *
+ * Erases the block if it's not bad.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos)
+{
+ if (nanddev_isbad(nand, pos) || nanddev_isreserved(nand, pos)) {
+ pr_warn("attempt to erase a bad/reserved block @%llx\n",
+ nanddev_pos_to_offs(nand, pos));
+ return -EIO;
+ }
+
+ return nand->ops->erase(nand, pos);
+}
+EXPORT_SYMBOL_GPL(nanddev_erase);
+
+/**
+ * nanddev_mtd_erase() - Generic mtd->_erase() implementation for NAND devices
+ * @mtd: MTD device
+ * @einfo: erase request
+ *
+ * This is a simple mtd->_erase() implementation iterating over all blocks
+ * concerned by @einfo and calling nand->ops->erase() on each of them.
+ *
+ * Note that mtd->_erase should not be directly assigned to this helper,
+ * because there's no locking here. NAND specialized layers should instead
+ * implement there own wrapper around nanddev_mtd_erase() taking the
+ * appropriate lock before calling nanddev_mtd_erase().
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ struct nand_pos pos, last;
+ int ret;
+
+ nanddev_offs_to_pos(nand, einfo->addr, &pos);
+ nanddev_offs_to_pos(nand, einfo->addr + einfo->len - 1, &last);
+ while (nanddev_pos_cmp(&pos, &last) <= 0) {
+ ret = nanddev_erase(nand, &pos);
+ if (ret) {
+ einfo->fail_addr = nanddev_pos_to_offs(nand, &pos);
+
+ return ret;
+ }
+
+ nanddev_pos_next_eraseblock(nand, &pos);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_mtd_erase);
+
+/**
+ * nanddev_init() - Initialize a NAND device
+ * @nand: NAND device
+ * @ops: NAND device operations
+ * @owner: NAND device owner
+ *
+ * Initializes a NAND device object. Consistency checks are done on @ops and
+ * @nand->memorg. Also takes care of initializing the BBT.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
+ struct module *owner)
+{
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+ struct nand_memory_organization *memorg = nanddev_get_memorg(nand);
+
+ if (!nand || !ops)
+ return -EINVAL;
+
+ if (!ops->erase || !ops->markbad || !ops->isbad)
+ return -EINVAL;
+
+ if (!memorg->bits_per_cell || !memorg->pagesize ||
+ !memorg->pages_per_eraseblock || !memorg->eraseblocks_per_lun ||
+ !memorg->planes_per_lun || !memorg->luns_per_target ||
+ !memorg->ntargets)
+ return -EINVAL;
+
+ nand->rowconv.eraseblock_addr_shift =
+ fls(memorg->pages_per_eraseblock - 1);
+ nand->rowconv.lun_addr_shift = fls(memorg->eraseblocks_per_lun - 1) +
+ nand->rowconv.eraseblock_addr_shift;
+
+ nand->ops = ops;
+
+ mtd->type = memorg->bits_per_cell == 1 ?
+ MTD_NANDFLASH : MTD_MLCNANDFLASH;
+ mtd->flags = MTD_CAP_NANDFLASH;
+ mtd->erasesize = memorg->pagesize * memorg->pages_per_eraseblock;
+ mtd->writesize = memorg->pagesize;
+ mtd->writebufsize = memorg->pagesize;
+ mtd->oobsize = memorg->oobsize;
+ mtd->size = nanddev_size(nand);
+ mtd->owner = owner;
+
+ return nanddev_bbt_init(nand);
+}
+EXPORT_SYMBOL_GPL(nanddev_init);
+
+/**
+ * nanddev_cleanup() - Release resources allocated in nanddev_init()
+ * @nand: NAND device
+ *
+ * Basically undoes what has been done in nanddev_init().
+ */
+void nanddev_cleanup(struct nand_device *nand)
+{
+ if (nanddev_bbt_is_initialized(nand))
+ nanddev_bbt_cleanup(nand);
+}
+EXPORT_SYMBOL_GPL(nanddev_cleanup);
+
+MODULE_DESCRIPTION("Generic NAND framework");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
new file mode 100644
index 0000000..ada7af4
--- /dev/null
+++ b/include/linux/mtd/nand.h
@@ -0,0 +1,731 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2017 - Free Electrons
+ *
+ * Authors:
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ * Peter Pan <peterpandong@micron.com>
+ */
+
+#ifndef __LINUX_MTD_NAND_H
+#define __LINUX_MTD_NAND_H
+
+#include <linux/mtd/mtd.h>
+
+/**
+ * struct nand_memory_organization - Memory organization structure
+ * @bits_per_cell: number of bits per NAND cell
+ * @pagesize: page size
+ * @oobsize: OOB area size
+ * @pages_per_eraseblock: number of pages per eraseblock
+ * @eraseblocks_per_lun: number of eraseblocks per LUN (Logical Unit Number)
+ * @planes_per_lun: number of planes per LUN
+ * @luns_per_target: number of LUN per target (target is a synonym for die)
+ * @ntargets: total number of targets exposed by the NAND device
+ */
+struct nand_memory_organization {
+ unsigned int bits_per_cell;
+ unsigned int pagesize;
+ unsigned int oobsize;
+ unsigned int pages_per_eraseblock;
+ unsigned int eraseblocks_per_lun;
+ unsigned int planes_per_lun;
+ unsigned int luns_per_target;
+ unsigned int ntargets;
+};
+
+#define NAND_MEMORG(bpc, ps, os, ppe, epl, ppl, lpt, nt) \
+ { \
+ .bits_per_cell = (bpc), \
+ .pagesize = (ps), \
+ .oobsize = (os), \
+ .pages_per_eraseblock = (ppe), \
+ .eraseblocks_per_lun = (epl), \
+ .planes_per_lun = (ppl), \
+ .luns_per_target = (lpt), \
+ .ntargets = (nt), \
+ }
+
+/**
+ * struct nand_row_converter - Information needed to convert an absolute offset
+ * into a row address
+ * @lun_addr_shift: position of the LUN identifier in the row address
+ * @eraseblock_addr_shift: position of the eraseblock identifier in the row
+ * address
+ */
+struct nand_row_converter {
+ unsigned int lun_addr_shift;
+ unsigned int eraseblock_addr_shift;
+};
+
+/**
+ * struct nand_pos - NAND position object
+ * @target: the NAND target/die
+ * @lun: the LUN identifier
+ * @plane: the plane within the LUN
+ * @eraseblock: the eraseblock within the LUN
+ * @page: the page within the LUN
+ *
+ * These information are usually used by specific sub-layers to select the
+ * appropriate target/die and generate a row address to pass to the device.
+ */
+struct nand_pos {
+ unsigned int target;
+ unsigned int lun;
+ unsigned int plane;
+ unsigned int eraseblock;
+ unsigned int page;
+};
+
+/**
+ * struct nand_page_io_req - NAND I/O request object
+ * @pos: the position this I/O request is targeting
+ * @dataoffs: the offset within the page
+ * @datalen: number of data bytes to read from/write to this page
+ * @databuf: buffer to store data in or get data from
+ * @ooboffs: the OOB offset within the page
+ * @ooblen: the number of OOB bytes to read from/write to this page
+ * @oobbuf: buffer to store OOB data in or get OOB data from
+ *
+ * This object is used to pass per-page I/O requests to NAND sub-layers. This
+ * way all useful information are already formatted in a useful way and
+ * specific NAND layers can focus on translating these information into
+ * specific commands/operations.
+ */
+struct nand_page_io_req {
+ struct nand_pos pos;
+ unsigned int dataoffs;
+ unsigned int datalen;
+ union {
+ const void *out;
+ void *in;
+ } databuf;
+ unsigned int ooboffs;
+ unsigned int ooblen;
+ union {
+ const void *out;
+ void *in;
+ } oobbuf;
+};
+
+/**
+ * struct nand_ecc_req - NAND ECC requirements
+ * @strength: ECC strength
+ * @step_size: ECC step/block size
+ */
+struct nand_ecc_req {
+ unsigned int strength;
+ unsigned int step_size;
+};
+
+#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
+
+/**
+ * struct nand_bbt - bad block table object
+ * @cache: in memory BBT cache
+ */
+struct nand_bbt {
+ unsigned long *cache;
+};
+
+struct nand_device;
+
+/**
+ * struct nand_ops - NAND operations
+ * @erase: erase a specific block. No need to check if the block is bad before
+ * erasing, this has been taken care of by the generic NAND layer
+ * @markbad: mark a specific block bad. No need to check if the block is
+ * already marked bad, this has been taken care of by the generic
+ * NAND layer. This method should just write the BBM (Bad Block
+ * Marker) so that future call to struct_nand_ops->isbad() return
+ * true
+ * @isbad: check whether a block is bad or not. This method should just read
+ * the BBM and return whether the block is bad or not based on what it
+ * reads
+ *
+ * These are all low level operations that should be implemented by specialized
+ * NAND layers (SPI NAND, raw NAND, ...).
+ */
+struct nand_ops {
+ int (*erase)(struct nand_device *nand, const struct nand_pos *pos);
+ int (*markbad)(struct nand_device *nand, const struct nand_pos *pos);
+ bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos);
+};
+
+/**
+ * struct nand_device - NAND device
+ * @mtd: MTD instance attached to the NAND device
+ * @memorg: memory layout
+ * @eccreq: ECC requirements
+ * @rowconv: position to row address converter
+ * @bbt: bad block table info
+ * @ops: NAND operations attached to the NAND device
+ *
+ * Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
+ * should declare their own NAND object embedding a nand_device struct (that's
+ * how inheritance is done).
+ * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
+ * at device detection time to reflect the NAND device
+ * capabilities/requirements. Once this is done nanddev_init() can be called.
+ * It will take care of converting NAND information into MTD ones, which means
+ * the specialized NAND layers should never manually tweak
+ * struct_nand_device->mtd except for the ->_read/write() hooks.
+ */
+struct nand_device {
+ struct mtd_info *mtd;
+ struct nand_memory_organization memorg;
+ struct nand_ecc_req eccreq;
+ struct nand_row_converter rowconv;
+ struct nand_bbt bbt;
+ const struct nand_ops *ops;
+};
+
+/**
+ * struct nand_io_iter - NAND I/O iterator
+ * @req: current I/O request
+ * @oobbytes_per_page: maximum number of OOB bytes per page
+ * @dataleft: remaining number of data bytes to read/write
+ * @oobleft: remaining number of OOB bytes to read/write
+ *
+ * Can be used by specialized NAND layers to iterate over all pages covered
+ * by an MTD I/O request, which should greatly simplifies the boiler-plate
+ * code needed to read/write data from/to a NAND device.
+ */
+struct nand_io_iter {
+ struct nand_page_io_req req;
+ unsigned int oobbytes_per_page;
+ unsigned int dataleft;
+ unsigned int oobleft;
+};
+
+/**
+ * mtd_to_nanddev() - Get the NAND device attached to the MTD instance
+ * @mtd: MTD instance
+ *
+ * Return: the NAND device embedding @mtd.
+ */
+static inline struct nand_device *mtd_to_nanddev(struct mtd_info *mtd)
+{
+ return mtd->priv;
+}
+
+/**
+ * nanddev_to_mtd() - Get the MTD device attached to a NAND device
+ * @nand: NAND device
+ *
+ * Return: the MTD device embedded in @nand.
+ */
+static inline struct mtd_info *nanddev_to_mtd(struct nand_device *nand)
+{
+ return nand->mtd;
+}
+
+/*
+ * nanddev_bits_per_cell() - Get the number of bits per cell
+ * @nand: NAND device
+ *
+ * Return: the number of bits per cell.
+ */
+static inline unsigned int nanddev_bits_per_cell(const struct nand_device *nand)
+{
+ return nand->memorg.bits_per_cell;
+}
+
+/**
+ * nanddev_page_size() - Get NAND page size
+ * @nand: NAND device
+ *
+ * Return: the page size.
+ */
+static inline size_t nanddev_page_size(const struct nand_device *nand)
+{
+ return nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_per_page_oobsize() - Get NAND OOB size
+ * @nand: NAND device
+ *
+ * Return: the OOB size.
+ */
+static inline unsigned int
+nanddev_per_page_oobsize(const struct nand_device *nand)
+{
+ return nand->memorg.oobsize;
+}
+
+/**
+ * nanddev_pages_per_eraseblock() - Get the number of pages per eraseblock
+ * @nand: NAND device
+ *
+ * Return: the number of pages per eraseblock.
+ */
+static inline unsigned int
+nanddev_pages_per_eraseblock(const struct nand_device *nand)
+{
+ return nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_per_page_oobsize() - Get NAND erase block size
+ * @nand: NAND device
+ *
+ * Return: the eraseblock size.
+ */
+static inline size_t nanddev_eraseblock_size(const struct nand_device *nand)
+{
+ return nand->memorg.pagesize * nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_eraseblocks_per_lun() - Get the number of eraseblocks per LUN
+ * @nand: NAND device
+ *
+ * Return: the number of eraseblocks per LUN.
+ */
+static inline unsigned int
+nanddev_eraseblocks_per_lun(const struct nand_device *nand)
+{
+ return nand->memorg.eraseblocks_per_lun;
+}
+
+/**
+ * nanddev_target_size() - Get the total size provided by a single target/die
+ * @nand: NAND device
+ *
+ * Return: the total size exposed by a single target/die in bytes.
+ */
+static inline u64 nanddev_target_size(const struct nand_device *nand)
+{
+ return (u64)nand->memorg.luns_per_target *
+ nand->memorg.eraseblocks_per_lun *
+ nand->memorg.pages_per_eraseblock *
+ nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_ntarget() - Get the total of targets
+ * @nand: NAND device
+ *
+ * Return: the number of targets/dies exposed by @nand.
+ */
+static inline unsigned int nanddev_ntargets(const struct nand_device *nand)
+{
+ return nand->memorg.ntargets;
+}
+
+/**
+ * nanddev_neraseblocks() - Get the total number of erasablocks
+ * @nand: NAND device
+ *
+ * Return: the total number of eraseblocks exposed by @nand.
+ */
+static inline unsigned int nanddev_neraseblocks(const struct nand_device *nand)
+{
+ return (u64)nand->memorg.luns_per_target *
+ nand->memorg.eraseblocks_per_lun *
+ nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_size() - Get NAND size
+ * @nand: NAND device
+ *
+ * Return: the total size (in bytes) exposed by @nand.
+ */
+static inline u64 nanddev_size(const struct nand_device *nand)
+{
+ return nanddev_target_size(nand) * nanddev_ntargets(nand);
+}
+
+/**
+ * nanddev_get_memorg() - Extract memory organization info from a NAND device
+ * @nand: NAND device
+ *
+ * This can be used by the upper layer to fill the memorg info before calling
+ * nanddev_init().
+ *
+ * Return: the memorg object embedded in the NAND device.
+ */
+static inline struct nand_memory_organization *
+nanddev_get_memorg(struct nand_device *nand)
+{
+ return &nand->memorg;
+}
+
+int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
+ struct module *owner);
+void nanddev_cleanup(struct nand_device *nand);
+
+/**
+ * nanddev_register() - Register a NAND device
+ * @nand: NAND device
+ *
+ * Register a NAND device.
+ * This function is just a wrapper around mtd_device_register()
+ * registering the MTD device embedded in @nand.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+static inline int nanddev_register(struct nand_device *nand)
+{
+ return mtd_device_register(nand->mtd, NULL, 0);
+}
+
+/**
+ * nanddev_unregister() - Unregister a NAND device
+ * @nand: NAND device
+ *
+ * Unregister a NAND device.
+ * This function is just a wrapper around mtd_device_unregister()
+ * unregistering the MTD device embedded in @nand.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+static inline int nanddev_unregister(struct nand_device *nand)
+{
+ return mtd_device_unregister(nand->mtd);
+}
+
+/**
+ * nanddev_set_of_node() - Attach a DT node to a NAND device
+ * @nand: NAND device
+ * @np: DT node
+ *
+ * Attach a DT node to a NAND device.
+ */
+static inline void nanddev_set_of_node(struct nand_device *nand,
+ const struct device_node *np)
+{
+ mtd_set_of_node(nand->mtd, np);
+}
+
+/**
+ * nanddev_get_of_node() - Retrieve the DT node attached to a NAND device
+ * @nand: NAND device
+ *
+ * Return: the DT node attached to @nand.
+ */
+static inline const struct device_node *nanddev_get_of_node(struct nand_device *nand)
+{
+ return mtd_get_of_node(nand->mtd);
+}
+
+/**
+ * nanddev_offs_to_pos() - Convert an absolute NAND offset into a NAND position
+ * @nand: NAND device
+ * @offs: absolute NAND offset (usually passed by the MTD layer)
+ * @pos: a NAND position object to fill in
+ *
+ * Converts @offs into a nand_pos representation.
+ *
+ * Return: the offset within the NAND page pointed by @pos.
+ */
+static inline unsigned int nanddev_offs_to_pos(struct nand_device *nand,
+ loff_t offs,
+ struct nand_pos *pos)
+{
+ unsigned int pageoffs;
+ u64 tmp = offs;
+
+ pageoffs = do_div(tmp, nand->memorg.pagesize);
+ pos->page = do_div(tmp, nand->memorg.pages_per_eraseblock);
+ pos->eraseblock = do_div(tmp, nand->memorg.eraseblocks_per_lun);
+ pos->plane = pos->eraseblock % nand->memorg.planes_per_lun;
+ pos->lun = do_div(tmp, nand->memorg.luns_per_target);
+ pos->target = tmp;
+
+ return pageoffs;
+}
+
+/**
+ * nanddev_pos_cmp() - Compare two NAND positions
+ * @a: First NAND position
+ * @b: Second NAND position
+ *
+ * Compares two NAND positions.
+ *
+ * Return: -1 if @a < @b, 0 if @a == @b and 1 if @a > @b.
+ */
+static inline int nanddev_pos_cmp(const struct nand_pos *a,
+ const struct nand_pos *b)
+{
+ if (a->target != b->target)
+ return a->target < b->target ? -1 : 1;
+
+ if (a->lun != b->lun)
+ return a->lun < b->lun ? -1 : 1;
+
+ if (a->eraseblock != b->eraseblock)
+ return a->eraseblock < b->eraseblock ? -1 : 1;
+
+ if (a->page != b->page)
+ return a->page < b->page ? -1 : 1;
+
+ return 0;
+}
+
+/**
+ * nanddev_pos_to_offs() - Convert a NAND position into an absolute offset
+ * @nand: NAND device
+ * @pos: the NAND position to convert
+ *
+ * Converts @pos NAND position into an absolute offset.
+ *
+ * Return: the absolute offset. Note that @pos points to the beginning of a
+ * page, if one wants to point to a specific offset within this page
+ * the returned offset has to be adjusted manually.
+ */
+static inline loff_t nanddev_pos_to_offs(struct nand_device *nand,
+ const struct nand_pos *pos)
+{
+ unsigned int npages;
+
+ npages = pos->page +
+ ((pos->eraseblock +
+ (pos->lun +
+ (pos->target * nand->memorg.luns_per_target)) *
+ nand->memorg.eraseblocks_per_lun) *
+ nand->memorg.pages_per_eraseblock);
+
+ return (loff_t)npages * nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_pos_to_row() - Extract a row address from a NAND position
+ * @nand: NAND device
+ * @pos: the position to convert
+ *
+ * Converts a NAND position into a row address that can then be passed to the
+ * device.
+ *
+ * Return: the row address extracted from @pos.
+ */
+static inline unsigned int nanddev_pos_to_row(struct nand_device *nand,
+ const struct nand_pos *pos)
+{
+ return (pos->lun << nand->rowconv.lun_addr_shift) |
+ (pos->eraseblock << nand->rowconv.eraseblock_addr_shift) |
+ pos->page;
+}
+
+/**
+ * nanddev_pos_next_target() - Move a position to the next target/die
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next target/die. Useful when you
+ * want to iterate over all targets/dies of a NAND device.
+ */
+static inline void nanddev_pos_next_target(struct nand_device *nand,
+ struct nand_pos *pos)
+{
+ pos->page = 0;
+ pos->plane = 0;
+ pos->eraseblock = 0;
+ pos->lun = 0;
+ pos->target++;
+}
+
+/**
+ * nanddev_pos_next_lun() - Move a position to the next LUN
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next LUN. Useful when you want to
+ * iterate over all LUNs of a NAND device.
+ */
+static inline void nanddev_pos_next_lun(struct nand_device *nand,
+ struct nand_pos *pos)
+{
+ if (pos->lun >= nand->memorg.luns_per_target - 1)
+ return nanddev_pos_next_target(nand, pos);
+
+ pos->lun++;
+ pos->page = 0;
+ pos->plane = 0;
+ pos->eraseblock = 0;
+}
+
+/**
+ * nanddev_pos_next_eraseblock() - Move a position to the next eraseblock
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next eraseblock. Useful when you
+ * want to iterate over all eraseblocks of a NAND device.
+ */
+static inline void nanddev_pos_next_eraseblock(struct nand_device *nand,
+ struct nand_pos *pos)
+{
+ if (pos->eraseblock >= nand->memorg.eraseblocks_per_lun - 1)
+ return nanddev_pos_next_lun(nand, pos);
+
+ pos->eraseblock++;
+ pos->page = 0;
+ pos->plane = pos->eraseblock % nand->memorg.planes_per_lun;
+}
+
+/**
+ * nanddev_pos_next_eraseblock() - Move a position to the next page
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next page. Useful when you want to
+ * iterate over all pages of a NAND device.
+ */
+static inline void nanddev_pos_next_page(struct nand_device *nand,
+ struct nand_pos *pos)
+{
+ if (pos->page >= nand->memorg.pages_per_eraseblock - 1)
+ return nanddev_pos_next_eraseblock(nand, pos);
+
+ pos->page++;
+}
+
+/**
+ * nand_io_iter_init - Initialize a NAND I/O iterator
+ * @nand: NAND device
+ * @offs: absolute offset
+ * @req: MTD request
+ * @iter: NAND I/O iterator
+ *
+ * Initializes a NAND iterator based on the information passed by the MTD
+ * layer.
+ */
+static inline void nanddev_io_iter_init(struct nand_device *nand,
+ loff_t offs, struct mtd_oob_ops *req,
+ struct nand_io_iter *iter)
+{
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+
+ iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
+ iter->req.ooboffs = req->ooboffs;
+ iter->oobbytes_per_page = mtd_oobavail(mtd, req);
+ iter->dataleft = req->len;
+ iter->oobleft = req->ooblen;
+ iter->req.databuf.in = req->datbuf;
+ iter->req.datalen = min_t(unsigned int,
+ nand->memorg.pagesize - iter->req.dataoffs,
+ iter->dataleft);
+ iter->req.oobbuf.in = req->oobbuf;
+ iter->req.ooblen = min_t(unsigned int,
+ iter->oobbytes_per_page - iter->req.ooboffs,
+ iter->oobleft);
+}
+
+/**
+ * nand_io_iter_next_page - Move to the next page
+ * @nand: NAND device
+ * @iter: NAND I/O iterator
+ *
+ * Updates the @iter to point to the next page.
+ */
+static inline void nanddev_io_iter_next_page(struct nand_device *nand,
+ struct nand_io_iter *iter)
+{
+ nanddev_pos_next_page(nand, &iter->req.pos);
+ iter->dataleft -= iter->req.datalen;
+ iter->req.databuf.in += iter->req.datalen;
+ iter->oobleft -= iter->req.ooblen;
+ iter->req.oobbuf.in += iter->req.ooblen;
+ iter->req.dataoffs = 0;
+ iter->req.ooboffs = 0;
+ iter->req.datalen = min_t(unsigned int, nand->memorg.pagesize,
+ iter->dataleft);
+ iter->req.ooblen = min_t(unsigned int, iter->oobbytes_per_page,
+ iter->oobleft);
+}
+
+/**
+ * nand_io_iter_end - Should end iteration or not
+ * @nand: NAND device
+ * @iter: NAND I/O iterator
+ *
+ * Check whether @iter has reached the end of the NAND portion it was asked to
+ * iterate on or not.
+ *
+ * Return: true if @iter has reached the end of the iteration request, false
+ * otherwise.
+ */
+static inline bool nanddev_io_iter_end(struct nand_device *nand,
+ const struct nand_io_iter *iter)
+{
+ if (iter->dataleft || iter->oobleft)
+ return false;
+
+ return true;
+}
+
+/**
+ * nand_io_for_each_page - Iterate over all NAND pages contained in an MTD I/O
+ * request
+ * @nand: NAND device
+ * @start: start address to read/write from
+ * @req: MTD I/O request
+ * @iter: NAND I/O iterator
+ *
+ * Should be used for iterate over pages that are contained in an MTD request.
+ */
+#define nanddev_io_for_each_page(nand, start, req, iter) \
+ for (nanddev_io_iter_init(nand, start, req, iter); \
+ !nanddev_io_iter_end(nand, iter); \
+ nanddev_io_iter_next_page(nand, iter))
+
+bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos);
+bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos);
+int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos);
+int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos);
+
+/* BBT related functions */
+enum nand_bbt_block_status {
+ NAND_BBT_BLOCK_STATUS_UNKNOWN,
+ NAND_BBT_BLOCK_GOOD,
+ NAND_BBT_BLOCK_WORN,
+ NAND_BBT_BLOCK_RESERVED,
+ NAND_BBT_BLOCK_FACTORY_BAD,
+ NAND_BBT_BLOCK_NUM_STATUS,
+};
+
+int nanddev_bbt_init(struct nand_device *nand);
+void nanddev_bbt_cleanup(struct nand_device *nand);
+int nanddev_bbt_update(struct nand_device *nand);
+int nanddev_bbt_get_block_status(const struct nand_device *nand,
+ unsigned int entry);
+int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry,
+ enum nand_bbt_block_status status);
+int nanddev_bbt_markbad(struct nand_device *nand, unsigned int block);
+
+/**
+ * nanddev_bbt_pos_to_entry() - Convert a NAND position into a BBT entry
+ * @nand: NAND device
+ * @pos: the NAND position we want to get BBT entry for
+ *
+ * Return the BBT entry used to store information about the eraseblock pointed
+ * by @pos.
+ *
+ * Return: the BBT entry storing information about eraseblock pointed by @pos.
+ */
+static inline unsigned int nanddev_bbt_pos_to_entry(struct nand_device *nand,
+ const struct nand_pos *pos)
+{
+ return pos->eraseblock +
+ ((pos->lun + (pos->target * nand->memorg.luns_per_target)) *
+ nand->memorg.eraseblocks_per_lun);
+}
+
+/**
+ * nanddev_bbt_is_initialized() - Check if the BBT has been initialized
+ * @nand: NAND device
+ *
+ * Return: true if the BBT has been initialized, false otherwise.
+ */
+static inline bool nanddev_bbt_is_initialized(struct nand_device *nand)
+{
+ return !!nand->bbt.cache;
+}
+
+/* MTD -> NAND helper functions. */
+int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo);
+
+#endif /* __LINUX_MTD_NAND_H */