doc: mxc_hab: Move HAB related info to the appropriate doc
Currently the High Assurance Boot procedure is documented in two
places:
- doc/README.imx6
- doc/README.mxc_hab
It is better to consolidate all HAB related information into
README.mxc_hab file, so move the content from README.imx6 to
README.mxc_hab.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab
index 4bd07d3..056ade7 100644
--- a/doc/README.mxc_hab
+++ b/doc/README.mxc_hab
@@ -1,4 +1,5 @@
-High Assurance Boot (HAB) for i.MX6 CPUs
+1. High Assurance Boot (HAB) for i.MX CPUs
+------------------------------------------
To enable the authenticated or encrypted boot mode of U-Boot, it is
required to set the proper configuration for the target board. This
@@ -52,8 +53,58 @@
NOTE: U-Boot_CSF.bin needs to be padded to the value specified in
the imximage.cfg file.
-Setup U-Boot Image for Encrypted Boot
--------------------------------------
+
+2. Using Secure Boot on i.MX6 machines with SPL support
+-------------------------------------------------------
+
+This version of U-Boot is able to build a signable version of the SPL
+as well as a signable version of the U-Boot image. The signature can
+be verified through High Assurance Boot (HAB).
+
+CONFIG_SECURE_BOOT is needed to build those two binaries.
+After building, you need to create a command sequence file and use
+Freescales Code Signing Tool to sign both binaries. After creation,
+the mkimage tool outputs the required information about the HAB Blocks
+parameter for the CSF. During the build, the information is preserved
+in log files named as the binaries. (SPL.log and u-boot-ivt.log).
+
+More information about the CSF and HAB can be found in the AN4581.
+https://cache.freescale.com/files/32bit/doc/app_note/AN4581.pdf
+
+We don't want to explain how to create a PKI tree or SRK table as
+this is well explained in the Application Note.
+
+Example Output of the SPL (imximage) creation:
+ Image Type: Freescale IMX Boot Image
+ Image Ver: 2 (i.MX53/6/7 compatible)
+ Mode: DCD
+ Data Size: 61440 Bytes = 60.00 kB = 0.06 MB
+ Load Address: 00907420
+ Entry Point: 00908000
+ HAB Blocks: 00907400 00000000 0000cc00
+
+Example Output of the u-boot-ivt.img (firmware_ivt) creation:
+ Image Name: U-Boot 2016.11-rc1-31589-g2a4411
+ Created: Sat Nov 5 21:53:28 2016
+ Image Type: ARM U-Boot Firmware with HABv4 IVT (uncompressed)
+ Data Size: 352192 Bytes = 343.94 kB = 0.34 MB
+ Load Address: 17800000
+ Entry Point: 00000000
+ HAB Blocks: 0x177fffc0 0x0000 0x00054020
+
+The CST (Code Signing Tool) can be downloaded from NXP.
+# Compile CSF and create signature
+./cst --o csf-u-boot.bin < command_sequence_uboot.csf
+./cst --o csf-SPL.bin < command_sequence_spl.csf
+# Append compiled CSF to Binary
+cat SPL csf-SPL.bin > SPL-signed
+cat u-boot-ivt.img csf-u-boot.bin > u-boot-signed.img
+
+These two signed binaries can be used on an i.MX6 in closed
+configuration when the according SRK Table Hash has been flashed.
+
+3. Setup U-Boot Image for Encrypted Boot
+-----------------------------------------
An authenticated U-Boot image is used as starting point for
Encrypted Boot. The image is encrypted by Freescale's Code
Signing Tool (CST). The CST replaces only the image data of