Add support for TB5200 board
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
integrated in a little aluminium case.
Patch by Martin Krause, 8 Jun 2006
Some code cleanup
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index 77d2d56..a49ed3b 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -34,7 +34,7 @@
#define CONFIG_AU1000 1
-#define CONFIG_MISC_INIT_R 1
+#define CONFIG_MISC_INIT_R 1
#define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */
@@ -59,21 +59,21 @@
#define CONFIG_AUTOBOOT_DELAY_STR "d"
#define CONFIG_AUTOBOOT_STOP_STR " "
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#define CONFIG_BOOTARGS "panic=1"
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_BOOTARGS "panic=1"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"addmisc=setenv bootargs $(bootargs) " \
- "ethaddr=$(ethaddr) \0" \
- "netboot=bootp;run addmisc;bootm\0" \
- ""
+ "ethaddr=$(ethaddr) \0" \
+ "netboot=bootp;run addmisc;bootm\0" \
+ ""
/* Boot from Compact flash partition 2 as default */
#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm"
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \
~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
- CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \
+ CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \
CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT ))
#include <cmd_confdefs.h>
@@ -81,11 +81,11 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args*/
#define CFG_MALLOC_LEN 128*1024
@@ -93,16 +93,16 @@
#define CFG_MHZ 500
-#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
+#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */
-#define CFG_LOAD_ADDR 0x81000000 /* default load address */
+#define CFG_LOAD_ADDR 0x81000000 /* default load address */
#define CFG_MEMTEST_START 0x80100000
#define CFG_MEMTEST_END 0x83000000
-#define CONFIG_HW_WATCHDOG 1
+#define CONFIG_HW_WATCHDOG 1
/*-----------------------------------------------------------------------
* FLASH and environment organization
@@ -113,8 +113,8 @@
#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */
/* The following #defines are needed to get flash environment right */
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (192 << 10)
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (192 << 10)
#define CFG_INIT_SP_OFFSET 0x400000
@@ -125,7 +125,7 @@
#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */
-#define CFG_ENV_IS_NOWHERE 1
+#define CFG_ENV_IS_NOWHERE 1
/* Address and size of Primary Environment Sector */
#define CFG_ENV_ADDR 0xB0030000
@@ -158,21 +158,21 @@
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
#define CFG_ATA_IDE0_OFFSET 0
-#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE
/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET 0
+#define CFG_ATA_DATA_OFFSET 0
-/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET 0
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET 0
-/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET 0x0200
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0200
/*-----------------------------------------------------------------------
* Cache Configuration