Merge git://www.denx.de/git/u-boot
diff --git a/CHANGELOG b/CHANGELOG
index 24d805e..b77eec7 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,9 +1,438 @@
+commit c440bfe6d6d92d66478a7e84402b31f48413617b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jun 6 11:42:13 2007 +0200
+
+ ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
+
+ This patch adds NAND booting support for the AMCC Acadia eval board.
+
+ Please make sure to configure jumper J7 to position 2-3 when booting
+ from NOR, and to position 1-2 when booting for NAND.
+
+ I also added a board command to configure the I2C bootstrap EEPROM
+ values. Right now only 267MHz is support for booting either via NOR
+ or NAND FLASH. Here the usage:
+
+ => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
+ => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Jun 5 12:30:52 2007 -0500
+
+ mpc8641 image size cleanup
+
+ e600 does not have a bootpg restriction.
+ Move the version string to beginning of image at fff00000.
+ Resetvec.S is not needed.
+ Update flash copy instructions.
+ Add tftpflash env variable
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
+Author: Benoît Monin <bmonin@adeneo.eu>
+Date: Mon Jun 4 08:36:05 2007 +0200
+
+ [PATCH] Fix ppc4xx bootstrap letter displayed on startup
+
+ The attached patch is mainly cosmetic, allowing u-boot to
+ display the correct bootstrap option letter according to the
+ datasheets.
+
+ The original patch was extended with 405EZ support by Stefan
+ Roese.
+
+ Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 16:18:17 2007 +0200
+
+ ppc4xx: Add missing file for Bamboo NAND booting support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:58:19 2007 +0200
+
+ ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
+
+ This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
+ suggested by AMCC it is not recommended to dynamically change the EBC
+ speed after bootup. So we undo this change to be on the safe side.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:29:04 2007 +0200
+
+ ppc4xx: Update Sequoia NAND booting support with ECC
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:27:11 2007 +0200
+
+ ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
+
+ This patch adds NAND booting support for the AMCC Bamboo eval board.
+ Since the NAND-SPL boot image is limited to 4kbytes, this version
+ only supports the onboard 64MBytes of DDR. The DIMM modules can't be
+ supported, since the setup code for I2C DIMM autodetection and
+ configuration is too big for this NAND bootloader.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42be56f53c8b107868e6125c8524ae84293e95a7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:23:04 2007 +0200
+
+ NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
+
+ The U-Boot NAND booting support is now extended to support ECC
+ upon loading of the NAND U-Boot image.
+
+ Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a471db07fbb65a841ffc9f4f112562b945230f98
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:19:29 2007 +0200
+
+ ppc4xx: Prepare Bamboo port for NAND booting support
+
+ This patch updates the "normal" Bamboo NOR booting port, so
+ that it is compatible with the coming soon NAND booting
+ Bamboo port.
+
+ It also enables the 2nd NAND flash on the Bamboo.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:16:58 2007 +0200
+
+ ppc4xx: Update in_be32() functions and friends to latest Linux version
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:15:12 2007 +0200
+
+ NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
+
+ This patch adds hardware ECC support to the NDFC driver. It also
+ changes the register access from using the "simple" in32/out32
+ functions to the in_be32/out_be32 functions, which make sure
+ that the access is correctly synced. This is the only recommended
+ access to SoC registers in the current Linux kernel.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:12:15 2007 +0200
+
+ NAND: Update nand_ecc.c to latest Linux version
+
+ This patch updates the nand_ecc code to the latest Linux version.
+ The main reason for this is the more compact code. This makes
+ it possible to include the ECC code into the NAND bootloader
+ image (NAND_SPL) for PPC4xx.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:09:50 2007 +0200
+
+ ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 13:45:24 2007 +0200
+
+ ppc4xx: Change Luan config file to support ECC
+
+ With the updated 44x DDR2 driver the Luan board now supports
+ ECC generation and checking.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7187db73491c8de0fb56efb5e5134ba5ec443089
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 13:45:00 2007 +0200
+
+ ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
+
+ Add config option for 180 degree advance clock control as needed
+ for the AMCC Luan eval board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ee1529838abbfaa35f14e3ffbeaaba693159475f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 31 17:20:09 2007 +0200
+
+ Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7049288fb1f16f1b317140226cdebd07bd416395
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:26:46 2007 +0200
+
+ Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4520fd4d2c450da49637216aa0e53739b61c60ac
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:06:36 2007 +0200
+
+ Motion-PRO: Add support for redundant environment.
+
+ Enable redundant environment, add a MTD partition for it; also add env.
+ variable command for passing MTD partitions to the kernel command line.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a26eabeec31746f06d309103690892805696e344
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:05:11 2007 +0200
+
+ Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
+
+ Allow passing longer command line to the kernel - useful especially
+ for passing MTD partition layout.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9160b96f71483a116de81c68985e8ee306d36764
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:04:18 2007 +0200
+
+ Fix: Add missing NULL termination in strings expanded by macros parser.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 630ec84aef7228fc1dbfb38dec78541403a786cd
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:03:37 2007 +0200
+
+ Motion-PRO: Update EEPROM's page write bits and write delay.
+
+ Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
+ have a page write capability of two bytes", and "This device offers fast (1ms)
+ byte write". Add 3ms of extra delay.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c00125e07c1ebc125bab40e1e18bceed8be0c162
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:58:45 2007 +0200
+
+ MPC5XXX, Motion-PRO: Fix PHY initialization problem.
+
+ After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
+ networking does not function. This commit switches PHY to TX mode by clearing
+ the FX_SEL bit of Mode Control Register. It also reverses commit
+ 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:57:15 2007 +0200
+
+ Motion-PRO: Add support for the temperature sensor.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:55:23 2007 +0200
+
+ Motion-PRO: Add displaying of CPLD revision information during boot.
+
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c99512d6bd3973f01ca2fc4896d829b46e68f150
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:53:43 2007 +0200
+
+ MPC5xxx: Change names of defines related to IPB and PCI clocks.
+
+ Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
+ them does not cause PCI or IPB clocks to run at the specified speed.
+ Instead, they configure divisors used to calculate said clocks. This
+ patch renames the defines according to their real function.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a11c0b85dc3664bb3c1e781137118730c8f619ab
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:51:48 2007 +0200
+
+ Motion-PRO: Add LED support.
+
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit d756894722c888d09a9fa1df8323753772d3dcce
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 24 09:49:00 2007 +0200
+
+ ppc4xx: Fix small 405EZ OCM initilization bug in start.S
+
+ As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
+ fixes a small bug in the 405EZ OCM initialization. Thanks for
+ spotting.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5d4a179013d59a76446462e1eb0a969fba63eb81
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 24 08:22:09 2007 +0200
+
+ ppc4xx: Update AMCC Acadia support for board revision 1.1
+
+ This patch updates the Acadia (405EZ) support for the new 1.1 board
+ revision. It also adds support for NAND FLASH via the 4xx NDFC.
+
+ Please note that the jumper J7 must be in position 2-3 for this
+ NAND support. Position 1-2 is for NAND booting only. NAND booting
+ support will follow later.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9f0077abd69f7a7c756a915b961037302be3e6f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 22 12:48:09 2007 +0200
+
+ ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f3dfc139a838b0841c151efe00ad47db2366e79
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 22 12:46:10 2007 +0200
+
+ ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
+
+ This patch adds support for 405 PPC's to the 4xx NAND driver
+ ndfc.c. This is in preparation for the new AMCC 405EZ.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10603d76767426be803dadd4fb688b97eb69481c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 21 07:41:22 2007 +0200
+
+ ppc4xx: Fix problem in 405EZ OCM initialization
+
+ As spotted by Bruce Adler this patch fixes an initialization problem
+ for the 405EZ OCM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 16:47:03 2007 +0100
+
+ Reduce line lengths to 80 characters max.
+
+commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 14:34:07 2007 +0100
+
+ Makefile permissions
+
+commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 14:33:11 2007 +0100
+
+ Makefile permissions
+
+commit 70124c2602ae2d4c5d3dba05b482d91548242de8
+Author: Stefano Babic <sbabic@denx.de>
+Date: Wed May 16 14:49:12 2007 +0200
+
+ Fix compile problem cause my Microblaze merge
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit ada4697d0230d6da552867777f98a67ec3ba2579
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Wed May 16 13:23:10 2007 +0200
+
+ [PATCH] Run new sequoia boards with an EBC speed of 83MHz
+
+ Because the Sequoia board does not boot with an EBC faster than 66MHz,
+ the clock divider are changed after the initial boot process.
+
+ This allows for maximum clocking speeds to be achieved on newer boards.
+ Sequoia boards with 666.66 MHz processors require that the EBC divider
+ be set to 3 in order to start the initial boot process at a slower EBC
+ speed. After the initial boot process, the divider can be set back to 2,
+ which will cause the boards to run at 83.333MHz. This is backward
+ compatible with boards with 533.33 MHz processors, as these boards will
+ already be set with an EBC divider of 2.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+
+commit a7676ea7732f3c596805079fed7e5c9fac652cfc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 16 01:16:53 2007 +0200
+
+ Minor Coding Style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit d62f64cc23a940eafe712c776b3249e4160753d1
Author: Wolfgang Denk <wd@denx.de>
Date: Wed May 16 00:13:33 2007 +0200
Coding Style Cleanup, new CHANGELOG
+commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 11 12:01:49 2007 +0200
+
+ ppc4xx: Add mtcpr/mfcpr access macros
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 343c48bd84606c4025c8a7c7263fda465d6e284c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 11 12:01:06 2007 +0200
+
+ ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
Author: Piotr Kruszynski <ppk@semihalf.com>
Date: Thu May 10 16:55:52 2007 +0200
@@ -11,6 +440,48 @@
[Motion-PRO] Add MTD and JFFS2 support, also add default partition
definition.
+commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:42:44 2007 +0100
+
+ Add the board directory for SMN42
+
+commit 160131bf965785419626df6c388729fe0b597992
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:41:58 2007 +0100
+
+ Add the files for the SMN42 board
+
+commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:40:34 2007 +0100
+
+ Remove the deleted files for the SMN42 patch
+
+commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:37:56 2007 +0100
+
+ New board SMN42 branch
+
+commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 10:24:38 2007 +0100
+
+ Makefile permissions
+
+commit b84289b595731e8851df46e893845cc1322c9b9b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue May 8 14:17:07 2007 -0500
+
+ 8641hpcn: Fix Makefile after moving pixis to board/freescale.
+
+ The OBJTREE != SRCTREE build scenario was broken.
+ This fixes it.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
Author: Michal Simek <monstr@monstr.eu>
Date: Tue May 8 15:57:43 2007 +0200
@@ -93,6 +564,18 @@
fix: read and write MSR - repair number of parameters
+commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon May 7 19:42:49 2007 +0200
+
+ [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
+
+ A '3' got cut off in the formatting of the last patch to automatically
+ change the clock speed of the system clock on sequoia board.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
Author: Michal Simek <monstr@monstr.eu>
Date: Mon May 7 19:33:51 2007 +0200
diff --git a/MAKEALL b/MAKEALL
index 04653a0..0e4e744 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -75,22 +75,23 @@
#########################################################################
LIST_4xx=" \
- acadia ADCIOP alpr AP1000 \
- AR405 ASH405 bamboo bubinga \
- CANBT CMS700 CPCI2DP CPCI405 \
- CPCI4052 CPCI405AB CPCI405DT CPCI440 \
- CPCIISER4 CRAYL1 csb272 csb472 \
- DASA_SIM DP405 DU405 ebony \
- ERIC EXBITGEN G2000 HH405 \
- HUB405 JSE KAREF katmai \
- luan METROBOX MIP405 MIP405T \
- ML2 ml300 ocotea OCRTC \
- ORSG p3p440 PCI405 pcs440ep \
- PIP405 PLU405 PMC405 PPChameleonEVB \
- sbc405 sc3 sequoia sequoia_nand \
- taishan VOH405 VOM405 W7OLMC \
- W7OLMG walnut WUH405 XPEDITE1K \
- yellowstone yosemite yucca \
+ acadia acadia_nand ADCIOP alpr \
+ AP1000 AR405 ASH405 bamboo \
+ bamboo_nand bubinga CANBT CMS700 \
+ CPCI2DP CPCI405 CPCI4052 CPCI405AB \
+ CPCI405DT CPCI440 CPCIISER4 CRAYL1 \
+ csb272 csb472 DASA_SIM DP405 \
+ DU405 ebony ERIC EXBITGEN \
+ G2000 HH405 HUB405 JSE \
+ KAREF katmai luan METROBOX \
+ MIP405 MIP405T ML2 ml300 \
+ ocotea OCRTC ORSG p3p440 \
+ PCI405 pcs440ep PIP405 PLU405 \
+ PMC405 PPChameleonEVB sbc405 sc3 \
+ sequoia sequoia_nand taishan VOH405 \
+ VOM405 W7OLMC W7OLMG walnut \
+ WUH405 XPEDITE1K yellowstone yosemite \
+ yucca \
"
#########################################################################
@@ -185,7 +186,7 @@
LIST_ARM7=" \
armadillo B2 ep7312 evb4510 \
impa7 integratorap ap7 ap720t \
- lpc2292sodimm modnet50 \
+ lpc2292sodimm modnet50 SMN42 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index caa5a0e..d5e220a 100644
--- a/Makefile
+++ b/Makefile
@@ -173,9 +173,6 @@
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
-ifeq ($(CPU),mpc86xx)
-OBJS += cpu/$(CPU)/resetvec.o
-endif
ifeq ($(CPU),bf533)
OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o
OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o
@@ -1017,6 +1014,15 @@
acadia_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
+acadia_nand_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)nand_spl
+ @mkdir -p $(obj)board/amcc/acadia
+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
+ @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
ADCIOP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
@@ -1038,6 +1044,15 @@
bamboo_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
+bamboo_nand_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)nand_spl
+ @mkdir -p $(obj)board/amcc/bamboo
+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
+ @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
bubinga_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
@@ -1792,8 +1807,16 @@
stxgp3_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
-stxssa_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxssa
+stxssa_config \
+stxssa_4M_config: unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _4M_,$@)" ] ; then \
+ echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
+ echo "... with 4 MiB flash memory" ; \
+ else \
+ >$(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa
TQM8540_config \
TQM8541_config \
@@ -2113,7 +2136,10 @@
@$(MKCONFIG) $(@:_config=) arm arm720t evb4510
lpc2292sodimm_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm
+ @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
+
+SMN42_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
#########################################################################
## XScale Systems
diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile
index abcbf3e..ddbcb80 100644
--- a/board/amcc/acadia/Makefile
+++ b/board/amcc/acadia/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o cpr.o memory.o
+COBJS = $(BOARD).o cmd_acadia.o cpr.o memory.o
SOBJS =
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 3b63c8a..46d63e6 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -63,8 +63,14 @@
acadia_gpio_init();
/* Configure 405EZ for NAND usage */
- mtsdr(sdrnand0, 0x80c00000);
- mtsdr(sdrultra0, 0x8d110000);
+ mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
+ mfsdr(sdrultra0, reg);
+ reg &= ~SDR_ULTRA0_CSN_MASK;
+ reg |= (SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS) |
+ SDR_ULTRA0_NDGPIOBP |
+ SDR_ULTRA0_EBCRDYEN |
+ SDR_ULTRA0_NFSRSTEN;
+ mtsdr(sdrultra0, reg);
/* USB Host core needs this bit set */
mfsdr(sdrultra1, reg);
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
new file mode 100644
index 0000000..fb7ea35
--- /dev/null
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+
+static u8 boot_267_nor[] = {
+ 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00,
+ 0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00
+};
+
+static u8 boot_267_nand[] = {
+ 0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00,
+ 0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00
+};
+
+static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u8 chip;
+ u8 *buf;
+ int cpu_freq;
+
+ if (argc < 3) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ cpu_freq = simple_strtol(argv[1], NULL, 10);
+ if (cpu_freq != 267) {
+ printf("Unsupported cpu-frequency - only 267 supported\n");
+ return 1;
+ }
+
+ /* use 0x50 as I2C EEPROM address for now */
+ chip = 0x50;
+
+ if ((strcmp(argv[2], "nor") != 0) &&
+ (strcmp(argv[2], "nand") != 0)) {
+ printf("Unsupported boot-device - only nor|nand support\n");
+ return 1;
+ }
+
+ if (strcmp(argv[2], "nand") == 0) {
+ switch (cpu_freq) {
+ case 267:
+ buf = boot_267_nand;
+ break;
+ default:
+ break;
+ }
+ } else {
+ switch (cpu_freq) {
+ case 267:
+ buf = boot_267_nor;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (i2c_write(chip, 0, 1, buf, 16) != 0)
+ printf("Error writing to EEPROM at address 0x%x\n", chip);
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0)
+ printf("Error2 writing to EEPROM at address 0x%x\n", chip);
+
+ printf("Done\n");
+ printf("Please power-cycle the board for the changes to take effect\n");
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ bootstrap, 3, 0, do_bootstrap,
+ "bootstrap - program the I2C bootstrap EEPROM\n",
+ "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
+ );
diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk
index c8566ec..af5a46c 100644
--- a/board/amcc/acadia/config.mk
+++ b/board/amcc/acadia/config.mk
@@ -21,6 +21,12 @@
# MA 02111-1307 USA
#
+#
+# AMCC 405EZ Reference Platform (Acadia) board
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
ifndef TEXT_BASE
TEXT_BASE = 0xFFFC0000
endif
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c
index 5375d36..25904d3 100644
--- a/board/amcc/acadia/memory.c
+++ b/board/amcc/acadia/memory.c
@@ -39,6 +39,7 @@
return;
}
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
static void cram_bcr_write(u32 wr_val)
{
wr_val <<= 2;
@@ -62,9 +63,12 @@
return;
}
+#endif
long int initdram(int board_type)
{
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ int i;
u32 val;
/* 1. EBC need to program READY, CLK, ADV for ASync mode */
@@ -92,7 +96,12 @@
/* Config EBC to use RDY */
mfsdr(sdrultra0, val);
- mtsdr(sdrultra0, val | 0x04000000);
+ mtsdr(sdrultra0, val | SDR_ULTRA0_EBCRDYEN);
+
+ /* Wait a short while, since for NAND booting this is too fast */
+ for (i=0; i<200000; i++)
+ ;
+#endif
return (CFG_MBYTES_RAM << 20);
}
diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds
new file mode 100644
index 0000000..a5dae0e
--- /dev/null
+++ b/board/amcc/acadia/u-boot-nand.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ /* Align to next NAND block */
+ . = ALIGN(0x4000);
+ common/environment.o (.ppcenv)
+ /* Keep some space here for redundant env and potential bad env blocks */
+ . = ALIGN(0x10000);
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile
index 5da96e9..d01cc49 100644
--- a/board/amcc/bamboo/Makefile
+++ b/board/amcc/bamboo/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002-2006
+# (C) Copyright 2002-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -33,7 +33,7 @@
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 6260b01..2e651df 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -291,6 +291,7 @@
return (0);
}
+#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
/*************************************************************************
*
* init_spd_array -- Bamboo has one bank onboard sdram (plus DIMM)
@@ -345,10 +346,12 @@
cfg_simulate_spd_eeprom[25] = 0x00; /* SDRAM Cycle Time (cas latency 1.5) = N.A */
cfg_simulate_spd_eeprom[12] = 0x82; /* refresh Rate Type: Normal (15.625us) + Self refresh */
}
+#endif
long int initdram (int board_type)
{
- long dram_size = 0;
+#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
+ long dram_size;
/*
* First write simulated values in eeprom array for onboard bank 0
@@ -358,6 +361,9 @@
dram_size = spd_sdram();
return dram_size;
+#else
+ return CFG_MBYTES_SDRAM << 20;
+#endif
}
#if defined(CFG_DRAM_TEST)
@@ -881,11 +887,11 @@
/*------------------------------------------------------------------------- */
case BOOT_FROM_NAND_FLASH0:
/*------------------------------------------------------------------------- */
- ebc0_cs0_bnap_value = 0;
- ebc0_cs0_bncr_value = 0;
+ ebc0_cs0_bnap_value = EBC0_BNAP_NAND_FLASH;
+ ebc0_cs0_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
- ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH;
- ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1;
+ ebc0_cs1_bnap_value = 0;
+ ebc0_cs1_bncr_value = 0;
ebc0_cs2_bnap_value = 0;
ebc0_cs2_bncr_value = 0;
ebc0_cs3_bnap_value = 0;
@@ -1409,10 +1415,10 @@
gpio_tab[GPIO0][6].in_out = GPIO_OUT; /* EBC_CS_N(1) */
gpio_tab[GPIO0][6].alt_nb = GPIO_ALT1;
-#if 0
gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(2) */
gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1;
+#if 0
gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(3) */
gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1;
#endif
@@ -1900,12 +1906,21 @@
{
update_ndfc_ios();
+#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL))
mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL |
SDR0_CUST0_NDFC_ENABLE |
SDR0_CUST0_NDFC_BW_8_BIT |
SDR0_CUST0_NDFC_ARE_MASK |
SDR0_CUST0_CHIPSELGAT_EN1 |
SDR0_CUST0_CHIPSELGAT_EN2);
+#else
+ mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL |
+ SDR0_CUST0_NDFC_ENABLE |
+ SDR0_CUST0_NDFC_BW_8_BIT |
+ SDR0_CUST0_NDFC_ARE_MASK |
+ SDR0_CUST0_CHIPSELGAT_EN0 |
+ SDR0_CUST0_CHIPSELGAT_EN2);
+#endif
ndfc_selection_in_fpga();
}
diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
index 9d7f4c3..b46527d 100644
--- a/board/amcc/bamboo/config.mk
+++ b/board/amcc/bamboo/config.mk
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002-2006
+# (C) Copyright 2002-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -21,7 +21,11 @@
# MA 02111-1307 USA
#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
TEXT_BASE = 0xFFFA0000
+endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c
index a30ab7a..8a2e832 100644
--- a/board/amcc/bamboo/flash.c
+++ b/board/amcc/bamboo/flash.c
@@ -53,7 +53,7 @@
static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
{0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */
{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */
- {0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */
+ {0x87800001, 0x00000000, 0x00000000}, /* 0:boot from nand flash */
{0x87F00000, 0x87F80000, 0xFFC00001}, /* 3:boot from big flash 33*/
{0x87F00000, 0x87F80000, 0xFFC00001}, /* 4:boot from big flash 66*/
{0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */
@@ -134,10 +134,10 @@
flash_info[i].size = 0;
/* check whether the address is 0 */
- if (flash_addr_table[index][i] == 0) {
+ if (flash_addr_table[index][i] == 0)
continue;
- }
+ DEBUGF("Detection bank %d...\n", i);
/* call flash_get_size() to initialize sector address */
size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
&flash_info[i]);
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
index 7820107..1459eec 100644
--- a/board/amcc/bamboo/init.S
+++ b/board/amcc/bamboo/init.S
@@ -1,74 +1,31 @@
/*
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
#include <ppc_asm.tmpl>
#include <config.h>
-
-/* General */
-#define TLB_VALID 0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_8M 0x00000060
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
-
-/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
-
-/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
-
-/* Some handy macros */
-
-#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
-
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
-
-#define tlbtab_end\
- .long 0, 0, 0 ; \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
- .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
+#include <asm-ppc/mmu.h>
/**************************************************************************
* TLB TABLE
@@ -80,34 +37,68 @@
* Pointer to the table is returned in r1
*
*************************************************************************/
-
- .section .bootpg,"ax"
- .globl tlbtab
+ .section .bootpg,"ax"
+ .globl tlbtab
tlbtab:
- tlbtab_start
+ tlbtab_start
- /*
- * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
- * speed up boot process. It is patched after relocation to enable SA_I
- */
- tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+#ifndef CONFIG_NAND_SPL
+ tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
+#else
+ tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G)
+#endif
- /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G)
- tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
- tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
- tlbentry( CFG_NAND_ADDR, SZ_256M, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+ tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
- /* PCI */
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+ /* PCI base & peripherals */
+ tlbentry(CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I)
- /* USB 2.0 Device */
- tlbentry( CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry(CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
+ tlbentry(CFG_NAND_ADDR, SZ_4K, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I)
- tlbtab_end
+ /* PCI */
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I)
+
+ /* USB 2.0 Device */
+ tlbentry(CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I)
+
+ tlbtab_end
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * For NAND booting the first TLB has to be reconfigured to full size
+ * and with caching disabled after running from RAM!
+ */
+#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 0)
+#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ .globl reconfig_tlb0
+reconfig_tlb0:
+ sync
+ isync
+ addi r4,r0,0x0000 /* TLB entry #0 */
+ lis r5,TLB00@h
+ ori r5,r5,TLB00@l
+ tlbwe r5,r4,0x0000 /* Save it out */
+ lis r5,TLB01@h
+ ori r5,r5,TLB01@l
+ tlbwe r5,r4,0x0001 /* Save it out */
+ lis r5,TLB02@h
+ ori r5,r5,TLB02@l
+ tlbwe r5,r4,0x0002 /* Save it out */
+ sync
+ isync
+ blr
+#endif
diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds
new file mode 100644
index 0000000..a5dae0e
--- /dev/null
+++ b/board/amcc/bamboo/u-boot-nand.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ /* Align to next NAND block */
+ . = ALIGN(0x4000);
+ common/environment.o (.ppcenv)
+ /* Keep some space here for redundant env and potential bad env blocks */
+ . = ALIGN(0x10000);
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
index d045df1..78e2cb4 100644
--- a/board/amcc/sequoia/sdram.c
+++ b/board/amcc/sequoia/sdram.c
@@ -387,7 +387,11 @@
long int initdram (int board_type)
{
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if !defined(CONFIG_NAND_SPL)
ulong speed = get_bus_freq(0);
+#else
+ ulong speed = 133333333; /* 133MHz is on the safe side */
+#endif
mtsdram(DDR0_02, 0x00000000);
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 8704014..ba365ae 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -132,12 +132,6 @@
(0x80000000 >> (28 + CFG_NAND_CS));
mtsdr(SDR0_CUST0, sdr0_cust0);
- /* Update EBC speed after booting from i2c bootstrap settings
- * on newer boards with 33.333 MHZ Clocks
- */
- if (in8(CFG_BCSR_BASE + 3) & 0x80)
- mtcpr(0xe0, 0x02000000);
-
return 0;
}
diff --git a/board/lpc2292sodimm/Makefile b/board/lpc2292sodimm/Makefile
index 5a30198..18a95d7 100644
--- a/board/lpc2292sodimm/Makefile
+++ b/board/lpc2292sodimm/Makefile
@@ -1,7 +1,6 @@
#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -24,35 +23,29 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := lpc2292sodimm.o flash.o mmc.o spi.o mmc_hw.o eth.o
-SOBJS := lowlevel_init.o iap_entry.o
+COBJS := flash.o lpc2292sodimm.o
+SOBJTS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJTS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJTS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
-# this MUST be compiled as thumb code!
-iap_entry.o:
- arm-linux-gcc -D__ASSEMBLY__ -g -Os -fno-strict-aliasing \
- -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ \
- -DTEXT_BASE=0x81500000 -I/home/garyj/proj/LPC/u-boot/include \
- -fno-builtin -ffreestanding -nostdinc -isystem \
- /opt/eldk/arm/usr/bin/../lib/gcc/arm-linux/4.0.0/include -pipe \
- -DCONFIG_ARM -D__ARM__ -march=armv4t -mtune=arm7tdmi -mabi=apcs-gnu \
- -c -o iap_entry.o iap_entry.S
-
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
- rm -f $(LIB) core *.bak .depend
+ rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c
index 55aaabf..0fb0843 100644
--- a/board/lpc2292sodimm/flash.c
+++ b/board/lpc2292sodimm/flash.c
@@ -1,6 +1,9 @@
/*
* (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
*
+ * Modified to use the routines in cpu/arm720t/lpc2292/flash.c by
+ * Gary Jennejohn <garyj@denx,de>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -20,84 +23,16 @@
#include <common.h>
#include <asm/arch/hardware.h>
-/* IAP commands use 32 bytes at the top of CPU internal sram, we
- use 512 bytes below that */
-#define COPY_BUFFER_LOCATION 0x40003de0
-
-#define IAP_LOCATION 0x7ffffff1
-#define IAP_CMD_PREPARE 50
-#define IAP_CMD_COPY 51
-#define IAP_CMD_ERASE 52
-#define IAP_CMD_CHECK 53
-#define IAP_CMD_ID 54
-#define IAP_CMD_VERSION 55
-#define IAP_CMD_COMPARE 56
-
-#define IAP_RET_CMD_SUCCESS 0
-
#define SST_BASEADDR 0x80000000
#define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1)))
#define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1)))
-static unsigned long command[5];
-static unsigned long result[2];
-
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-extern void iap_entry(unsigned long * command, unsigned long * result);
-
-/*-----------------------------------------------------------------------
- *
- */
-int get_flash_sector(flash_info_t * info, ulong flash_addr)
-{
- int i;
-
- for(i=1; i < (info->sector_count); i++) {
- if (flash_addr < (info->start[i]))
- break;
- }
-
- return (i-1);
-}
-
-/*-----------------------------------------------------------------------
- * This function assumes that flash_addr is aligned on 512 bytes boundary
- * in flash. This function also assumes that prepare have been called
- * for the sector in question.
- */
-int copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
-{
- int first_sector;
- int last_sector;
-
- first_sector = get_flash_sector(info, flash_addr);
- last_sector = get_flash_sector(info, flash_addr + 512 - 1);
-
- /* prepare sectors for write */
- command[0] = IAP_CMD_PREPARE;
- command[1] = first_sector;
- command[2] = last_sector;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP prepare failed\n");
- return ERR_PROG_ERROR;
- }
-
- command[0] = IAP_CMD_COPY;
- command[1] = flash_addr;
- command[2] = COPY_BUFFER_LOCATION;
- command[3] = 512;
- command[4] = CFG_SYS_CLK_FREQ >> 10;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP copy failed\n");
- return 1;
- }
-
- return 0;
-}
+extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
+extern int lpc2292_flash_erase(flash_info_t *, int, int);
+extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong);
/*-----------------------------------------------------------------------
*
@@ -220,56 +155,6 @@
printf ("\n");
}
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase_philips (flash_info_t * info, int s_first, int s_last)
-{
- int flag;
- int prot;
- int sect;
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
-
- flag = disable_interrupts();
-
- printf ("Erasing %d sectors starting at sector %2d.\n"
- "This make take some time ... ",
- s_last - s_first + 1, s_first);
-
- command[0] = IAP_CMD_PREPARE;
- command[1] = s_first;
- command[2] = s_last;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP prepare failed\n");
- return ERR_PROTECTED;
- }
-
- command[0] = IAP_CMD_ERASE;
- command[1] = s_first;
- command[2] = s_last;
- command[3] = CFG_SYS_CLK_FREQ >> 10;
- iap_entry(command, result);
- if (result[0] != IAP_RET_CMD_SUCCESS) {
- printf("IAP erase failed\n");
- return ERR_PROTECTED;
- }
-
- if (flag)
- enable_interrupts();
-
- return ERR_OK;
-}
-
int flash_erase_sst (flash_info_t * info, int s_first, int s_last)
{
int i;
@@ -294,7 +179,7 @@
case (SST_MANUFACT & FLASH_VENDMASK):
return flash_erase_sst(info, s_first, s_last);
case (PHILIPS_LPC2292 & FLASH_VENDMASK):
- return flash_erase_philips(info, s_first, s_last);
+ return lpc2292_flash_erase(info, s_first, s_last);
default:
return ERR_PROTECTED;
}
@@ -353,122 +238,13 @@
return ret;
}
-int write_buff_philips (flash_info_t * info,
- uchar * src,
- ulong addr,
- ulong cnt)
-{
- int first_copy_size;
- int last_copy_size;
- int first_block;
- int last_block;
- int nbr_mid_blocks;
- uchar memmap_value;
- ulong i;
- uchar* src_org;
- uchar* dst_org;
- int ret = ERR_OK;
-
- src_org = src;
- dst_org = (uchar*)addr;
-
- first_block = addr / 512;
- last_block = (addr + cnt) / 512;
- nbr_mid_blocks = last_block - first_block - 1;
-
- first_copy_size = 512 - (addr % 512);
- last_copy_size = (addr + cnt) % 512;
-
-#if 0
- printf("\ncopy first block: (1) %lX -> %lX 0x200 bytes, "
- "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n",
- (ulong)(first_block * 512),
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)src,
- (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
- first_copy_size,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)(first_block * 512));
-#endif
-
- /* copy first block */
- memcpy((void*)COPY_BUFFER_LOCATION,
- (void*)(first_block * 512), 512);
- memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
- src, first_copy_size);
- copy_buffer_to_flash(info, first_block * 512);
- src += first_copy_size;
- addr += first_copy_size;
-
- /* copy middle blocks */
- for (i = 0; i < nbr_mid_blocks; i++) {
-#if 0
- printf("copy middle block: %lX -> %lX 512 bytes, "
- "%lX -> %lX 512 bytes\n",
- (ulong)src,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)addr);
-#endif
- memcpy((void*)COPY_BUFFER_LOCATION, src, 512);
- copy_buffer_to_flash(info, addr);
- src += 512;
- addr += 512;
- }
-
-
- if (last_copy_size > 0) {
-#if 0
- printf("copy last block: (1) %lX -> %lX 0x200 bytes, "
- "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n",
- (ulong)(last_block * 512),
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)src,
- (ulong)(COPY_BUFFER_LOCATION),
- last_copy_size,
- (ulong)COPY_BUFFER_LOCATION,
- (ulong)addr);
-#endif
- /* copy last block */
- memcpy((void*)COPY_BUFFER_LOCATION,
- (void*)(last_block * 512), 512);
- memcpy((void*)COPY_BUFFER_LOCATION,
- src, last_copy_size);
- copy_buffer_to_flash(info, addr);
- }
-
- /* verify write */
- memmap_value = GET8(MEMMAP);
-
- disable_interrupts();
-
- PUT8(MEMMAP, 01); /* we must make sure that initial 64
- bytes are taken from flash when we
- do the compare */
-
- for (i = 0; i < cnt; i++) {
- if (*dst_org != *src_org){
- printf("Write failed. Byte %lX differs\n", i);
- ret = ERR_PROG_ERROR;
- break;
- }
- dst_org++;
- src_org++;
- }
-
- PUT8(MEMMAP, memmap_value);
- enable_interrupts();
-
- return ret;
-}
-
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
switch (info->flash_id & FLASH_VENDMASK) {
case (SST_MANUFACT & FLASH_VENDMASK):
return write_buff_sst(info, src, addr, cnt);
case (PHILIPS_LPC2292 & FLASH_VENDMASK):
- return write_buff_philips(info, src, addr, cnt);
+ return lpc2292_write_buff(info, src, addr, cnt);
default:
return ERR_PROG_ERROR;
}
diff --git a/board/mpc8641hpcn/Makefile b/board/mpc8641hpcn/Makefile
index 9625211..df56b31 100644
--- a/board/mpc8641hpcn/Makefile
+++ b/board/mpc8641hpcn/Makefile
@@ -23,6 +23,10 @@
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../freescale/common)
+endif
+
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o sys_eeprom.o \
diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk
index 989a40b..f778dcb 100644
--- a/board/mpc8641hpcn/config.mk
+++ b/board/mpc8641hpcn/config.mk
@@ -25,7 +25,7 @@
# default CCSRBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-TEXT_BASE = 0xfff01000
+TEXT_BASE = 0xfff00000
PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float
diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds
index 13c1acf..34b50e4 100644
--- a/board/mpc8641hpcn/u-boot.lds
+++ b/board/mpc8641hpcn/u-boot.lds
@@ -1,7 +1,5 @@
/*
- * (C) Copyright 2004, Freescale, Inc.
- * (C) Copyright 2002,2003, Motorola,Inc.
- * Jeff Brown
+ * Copyright 2006, 2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -23,24 +21,11 @@
*/
OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
- .resetvec 0xFFF00100 :
- {
- *(.resetvec)
- } = 0xffff
-
- .bootpg 0xFFF70000 :
- {
- cpu/mpc86xx/start.o (.bootpg)
- board/mpc8641hpcn/init.o (.bootpg)
- } = 0xffff
/* Read-only sections, merged into text segment: */
- . = + 1024;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
@@ -66,7 +51,7 @@
.text :
{
cpu/mpc86xx/start.o (.text)
- board/mpc8641hpcn/init.o (.text)
+ board/mpc8641hpcn/init.o (.bootpg)
cpu/mpc86xx/traps.o (.text)
cpu/mpc86xx/interrupts.o (.text)
cpu/mpc86xx/cpu_init.o (.text)
@@ -88,6 +73,7 @@
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
+ *(.eh_frame)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
diff --git a/board/siemens/SMN42/Makefile b/board/siemens/SMN42/Makefile
new file mode 100644
index 0000000..2c7b54b
--- /dev/null
+++ b/board/siemens/SMN42/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := flash.o smn42.o
+SOBJTS := lowlevel_init.o
+
+SRCS := $(SOBJTS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJTS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/siemens/SMN42/config.mk b/board/siemens/SMN42/config.mk
new file mode 100644
index 0000000..b28f418
--- /dev/null
+++ b/board/siemens/SMN42/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#address where u-boot will be relocated
+#TEXT_BASE = 0x0
+TEXT_BASE = 0x81500000
diff --git a/board/siemens/SMN42/flash.c b/board/siemens/SMN42/flash.c
new file mode 100755
index 0000000..7d4977e
--- /dev/null
+++ b/board/siemens/SMN42/flash.c
@@ -0,0 +1,475 @@
+/*
+ * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
+ *
+ * (C) Copyright 2007 Gary Jennejohn garyj@denx.de
+ * Modified to use the routines in cpu/arm720t/lpc2292/flash.c.
+ * Heavily modified to support the SMN42 board from Siemens
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <asm/arch/hardware.h>
+
+static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
+extern int lpc2292_flash_erase(flash_info_t *, int, int);
+extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong);
+static unsigned long ext_flash_init(void);
+static int ext_flash_erase(flash_info_t *, int, int);
+static int ext_write_buff(flash_info_t *, uchar *, ulong, ulong);
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+ int j, k;
+ ulong size = 0;
+ ulong flashbase = 0;
+
+ flash_info[0].flash_id = PHILIPS_LPC2292;
+ flash_info[0].size = 0x003E000; /* 256 - 8 KB */
+ flash_info[0].sector_count = 17;
+ memset (flash_info[0].protect, 0, 17);
+ flashbase = 0x00000000;
+ for (j = 0, k = 0; j < 8; j++, k++) {
+ flash_info[0].start[k] = flashbase;
+ flashbase += 0x00002000;
+ }
+ for (j = 0; j < 2; j++, k++) {
+ flash_info[0].start[k] = flashbase;
+ flashbase += 0x00010000;
+ }
+ for (j = 0; j < 7; j++, k++) {
+ flash_info[0].start[k] = flashbase;
+ flashbase += 0x00002000;
+ }
+ size += flash_info[0].size;
+
+ /* Protect monitor and environment sectors */
+ flash_protect (FLAG_PROTECT_SET,
+ 0x0,
+ 0x0 + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+
+ size += ext_flash_init();
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+ int erased = 0;
+ unsigned long j;
+ unsigned long count;
+ unsigned char *p;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (PHILIPS_LPC2292 & FLASH_VENDMASK):
+ printf("Philips: ");
+ break;
+ case FLASH_MAN_AMD:
+ printf("AMD: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
+ printf("LPC2292 internal flash\n");
+ break;
+ case FLASH_S29GL128N:
+ printf ("S29GL128N (128 Mbit, uniform sector size)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ return;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ if (i < (info->sector_count - 1)) {
+ count = info->start[i+1] - info->start[i];
+ }
+ else {
+ count = info->start[0] + info->size - info->start[i];
+ }
+ p = (unsigned char*)(info->start[i]);
+ erased = 1;
+ for (j = 0; j < count; j++) {
+ if (*p != 0xFF) {
+ erased = 0;
+ break;
+ }
+ p++;
+ }
+ printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : " ",
+ erased ? " E" : " ");
+ }
+ printf ("\n");
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
+ return lpc2292_flash_erase(info, s_first, s_last);
+ case FLASH_S29GL128N:
+ return ext_flash_erase(info, s_first, s_last);
+ default:
+ return ERR_PROTECTED;
+ }
+ return ERR_PROTECTED;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
+ return lpc2292_write_buff(info, src, addr, cnt);
+ case FLASH_S29GL128N:
+ return ext_write_buff(info, src, addr, cnt);
+ default:
+ return ERR_PROG_ERROR;
+ }
+ return ERR_PROG_ERROR;
+}
+
+/*--------------------------------------------------------------------------
+ * From here on is code for the external S29GL128N taken from cam5200_flash.c
+ */
+
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+static int wait_for_DQ7_32(flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer(0);
+ last = start;
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+int ext_flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect, ret;
+
+ ret = 0;
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf("- missing\n");
+ else
+ printf("- no sectors to erase\n");
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect])
+ prot++;
+ }
+
+ if (prot)
+ printf("- Warning: %d protected sectors will not be erased!", prot);
+
+ printf("\n");
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ ret = wait_for_DQ7_32(info, sect);
+ if (ret) {
+ ret = ERR_PROTECTED;
+ break;
+ }
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay(1000);
+
+ /* reset to read mode */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ if (ret)
+ printf(" error\n");
+ else
+ printf(" done\n");
+ return ret;
+}
+
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+ short i;
+ CFG_FLASH_WORD_SIZE value;
+ ulong base = (ulong) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+ udelay(1000);
+
+ value = addr2[0];
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr2[1]; /* device ID */
+
+ switch (value) {
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_MIRROR:
+ value = addr2[14];
+ switch(value) {
+ case (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_2:
+ value = addr2[15];
+ if (value != (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_3) {
+ info->flash_id = FLASH_UNKNOWN;
+ } else {
+ info->flash_id += FLASH_S29GL128N;
+ info->sector_count = 128;
+ info->size = 0x01000000;
+ }
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return(0);
+ }
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start address table */
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00020000);
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ info->protect[i] = addr2[2] & 1;
+ }
+
+ /* issue bank reset to return to read mode */
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+ return (info->size);
+}
+
+static unsigned long ext_flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i = 1; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size((vu_long *) flash_addr_table[i],
+ &flash_info[i]);
+
+ flash_info[i].size = size_b[i];
+
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i+1, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
+
+static int write_word(flash_info_t * info, ulong dest, ushort data)
+{
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) &data;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*dest2 & *data2) != *data2) {
+ return (2);
+ }
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+ *dest2 = *data2;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer(0);
+ while ((*dest2 & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (*data2 & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ printf("WRITE_TOUT\n");
+ return (1);
+ }
+ }
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * This is taken from the original flash.c for the LPC2292 SODIMM board
+ * and modified to suit.
+ */
+
+int ext_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ushort tmp;
+ ulong i;
+ uchar* src_org;
+ uchar* dst_org;
+ ulong cnt_org = cnt;
+ int ret = ERR_OK;
+
+ src_org = src;
+ dst_org = (uchar*)addr;
+
+ if (addr & 1) { /* if odd address */
+ tmp = *((uchar*)(addr - 1)); /* little endian */
+ tmp |= (*src << 8);
+ if (write_word(info, addr - 1, tmp))
+ return ERR_PROG_ERROR;
+ addr += 1;
+ cnt -= 1;
+ src++;
+ }
+ while (cnt > 1) {
+ tmp = ((*(src+1)) << 8) + (*src); /* little endian */
+ if (write_word(info, addr, tmp))
+ return ERR_PROG_ERROR;
+ addr += 2;
+ src += 2;
+ cnt -= 2;
+ }
+ if (cnt > 0) {
+ tmp = (*((uchar*)(addr + 1))) << 8;
+ tmp |= *src;
+ if (write_word(info, addr, tmp))
+ return ERR_PROG_ERROR;
+ }
+
+ for (i = 0; i < cnt_org; i++) {
+ if (*dst_org != *src_org) {
+ printf("Write failed. Byte %lX differs\n", i);
+ ret = ERR_PROG_ERROR;
+ break;
+ }
+ dst_org++;
+ src_org++;
+ }
+
+ return ret;
+}
diff --git a/board/siemens/SMN42/lowlevel_init.S b/board/siemens/SMN42/lowlevel_init.S
new file mode 100644
index 0000000..11abb63
--- /dev/null
+++ b/board/siemens/SMN42/lowlevel_init.S
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
+ *
+ * Slight modifications made to support the SMN42 board from Siemens.
+ * 2007 Gary Jennejohn garyj@denx.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/hardware.h>
+
+/* some parameters for the board */
+/* setting up the CPU-internal memory */
+#define SRAM_START 0x40000000
+#define SRAM_SIZE 0x00004000
+#define BCFG0_VALUE 0x1000ffef
+#define BCFG1_VALUE 0x10005D2F
+#define BCFG2_VALUE 0x10005D2F
+/*
+ * For P0.18 to set ZZ to the SRAMs to 1. Also set P0.2 (SCL) and P0.3 (SDA)
+ * for the bit-banger I2C driver correctly.
+ */
+#define IO0_VALUE 0x4000C
+
+_TEXT_BASE:
+ .word TEXT_BASE
+MEMMAP_ADR:
+ .word MEMMAP
+BCFG0_ADR:
+ .word BCFG0
+_BCFG0_VALUE:
+ .word BCFG0_VALUE
+BCFG1_ADR:
+ .word BCFG1
+_BCFG1_VALUE:
+ .word BCFG1_VALUE
+BCFG2_ADR:
+ .word BCFG2
+_BCFG2_VALUE:
+ .word BCFG2_VALUE
+IO0DIR_ADR:
+ .word IO0DIR
+_IO0DIR_VALUE:
+ .word IO0_VALUE
+IO0SET_ADR:
+ .word IO0SET
+_IO0SET_VALUE:
+ .word IO0_VALUE
+PINSEL2_ADR:
+ .word PINSEL2
+PINSEL2_MASK:
+ .word 0x00000000
+PINSEL2_VALUE:
+ .word 0x0F804914
+
+.extern _start
+
+.globl lowlevel_init
+lowlevel_init:
+ /* set up memory control register for bank 0 */
+ ldr r0, _BCFG0_VALUE
+ ldr r1, BCFG0_ADR
+ str r0, [r1]
+
+ /* set up memory control register for bank 1 */
+ ldr r0, _BCFG1_VALUE
+ ldr r1, BCFG1_ADR
+ str r0, [r1]
+
+ /* set up memory control register for bank 2 */
+ ldr r0, _BCFG2_VALUE
+ ldr r1, BCFG2_ADR
+ str r0, [r1]
+
+ /* set IO0DIR to make P0.2, P0.3 and P0.18 outputs */
+ ldr r0, _IO0DIR_VALUE
+ ldr r1, IO0DIR_ADR
+ str r0, [r1]
+
+ /* set P0.18 to 1 */
+ ldr r0, _IO0SET_VALUE
+ ldr r1, IO0SET_ADR
+ str r0, [r1]
+
+ /* set up PINSEL2 for bus-pins */
+ ldr r0, PINSEL2_ADR
+ ldr r1, [r0]
+ ldr r2, PINSEL2_MASK
+ ldr r3, PINSEL2_VALUE
+ and r1, r1, r2
+ orr r1, r1, r3
+ str r1, [r0]
+
+ /* move vectors to beginning of SRAM */
+ mov r2, #SRAM_START
+ mov r0, #0 /*_start*/
+ ldmneia r0!, {r3-r10}
+ stmneia r2!, {r3-r10}
+ ldmneia r0, {r3-r9}
+ stmneia r2, {r3-r9}
+
+ /* Set-up MEMMAP register, so vectors are taken from SRAM */
+ ldr r0, MEMMAP_ADR
+ mov r1, #0x02 /* vectors re-mapped to static RAM */
+ str r1, [r0]
+
+ /* everything is fine now */
+ mov pc, lr
diff --git a/board/siemens/SMN42/smn42.c b/board/siemens/SMN42/smn42.c
new file mode 100644
index 0000000..cbfc76c
--- /dev/null
+++ b/board/siemens/SMN42/smn42.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
+ * Armadillo board HT1070
+ *
+ * (C) Copyright 2007 Gary Jennejohn <garyj@denx.de>
+ * Siemens board SMN42
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <clps7111.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number MACH_TYPE_ARMADILLO - not official*/
+ gd->bd->bi_arch_number = 83;
+
+ /* location of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x00000100;
+
+ return 0;
+}
+
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return (0);
+}
diff --git a/board/siemens/SMN42/u-boot.lds b/board/siemens/SMN42/u-boot.lds
new file mode 100644
index 0000000..64d946c
--- /dev/null
+++ b/board/siemens/SMN42/u-boot.lds
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm720t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/stxssa/config.mk b/board/stxssa/config.mk
index 30f42c5..5f4fc740 100644
--- a/board/stxssa/config.mk
+++ b/board/stxssa/config.mk
@@ -22,13 +22,12 @@
# MA 02111-1307 USA
#
-#
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
# U-Boot is less than 256K, so push
# it further up into the flash
#
-TEXT_BASE = 0xfffC0000
+TEXT_BASE = 0xFFFC0000
PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index cb1c5bb..a34ab79 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -690,7 +690,7 @@
);
U_BOOT_CMD(
- erase, 3, 1, do_flerase,
+ erase, 3, 0, do_flerase,
"erase - erase FLASH memory\n",
"start end\n"
" - erase FLASH from addr 'start' to addr 'end'\n"
@@ -704,7 +704,7 @@
);
U_BOOT_CMD(
- protect, 4, 1, do_protect,
+ protect, 4, 0, do_protect,
"protect - enable or disable FLASH write protection\n",
"on start end\n"
" - protect FLASH from addr 'start' to addr 'end'\n"
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index ce99a41..e308474 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -514,11 +514,11 @@
unsigned char c;
int i, bus;
#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3)
- unsigned int ata_reset_time;
+ unsigned int ata_reset_time = ATA_RESET_TIME;
+ char *s;
#endif
#ifdef CONFIG_AMIGAONEG3SE
unsigned int max_bus_scan;
- char *s;
#endif
#ifdef CONFIG_IDE_8xx_PCCARD
extern int pcmcia_on (void);
diff --git a/common/cmd_misc.c b/common/cmd_misc.c
index 67ee9e8..a99222d 100644
--- a/common/cmd_misc.c
+++ b/common/cmd_misc.c
@@ -63,7 +63,7 @@
#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */
U_BOOT_CMD(
- sleep , 2, 2, do_sleep,
+ sleep , 2, 1, do_sleep,
"sleep - delay execution for some time\n",
"N\n"
" - delay execution for N seconds (N is _decimal_ !!!)\n"
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 2eb5b26..b1a594f 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -87,7 +87,7 @@
}
U_BOOT_CMD(
- pinit, 2, 1, do_pinit,
+ pinit, 2, 0, do_pinit,
"pinit - PCMCIA sub-system\n",
"on - power on PCMCIA socket\n"
"pinit off - power off PCMCIA socket\n"
diff --git a/common/main.c b/common/main.c
index 09ee64b..553ac35 100644
--- a/common/main.c
+++ b/common/main.c
@@ -1336,7 +1336,7 @@
/* Did the user stop this? */
if (had_ctrlc ())
- return 0; /* if stopped then not repeatable */
+ return -1; /* if stopped then not repeatable */
}
return rc ? rc : repeatable;
diff --git a/common/soft_i2c.c b/common/soft_i2c.c
index edad51b..0f6e3a9 100644
--- a/common/soft_i2c.c
+++ b/common/soft_i2c.c
@@ -36,6 +36,9 @@
#ifdef CONFIG_IXP425 /* only valid for IXP425 */
#include <asm/arch/ixp425.h>
#endif
+#ifdef CONFIG_LPC2292
+#include <asm/arch/hardware.h>
+#endif
#include <i2c.h>
#if defined(CONFIG_SOFT_I2C)
diff --git a/cpu/arm720t/lpc2292/Makefile b/cpu/arm720t/lpc2292/Makefile
new file mode 100644
index 0000000..240f1e3
--- /dev/null
+++ b/cpu/arm720t/lpc2292/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS = flash.o mmc.o mmc_hw.o spi.o
+SOBJS = $(obj)iap_entry.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+# this MUST be compiled as thumb code!
+$(SOBJS):
+ $(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm720t/lpc2292/flash.c b/cpu/arm720t/lpc2292/flash.c
new file mode 100644
index 0000000..e5c8697
--- /dev/null
+++ b/cpu/arm720t/lpc2292/flash.c
@@ -0,0 +1,249 @@
+/*
+ * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
+ *
+ * Modified to remove all but the IAP-command related code by
+ * Gary Jennejohn <garyj@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+/* IAP commands use 32 bytes at the top of CPU internal sram, we
+ use 512 bytes below that */
+#define COPY_BUFFER_LOCATION 0x40003de0
+
+#define IAP_LOCATION 0x7ffffff1
+#define IAP_CMD_PREPARE 50
+#define IAP_CMD_COPY 51
+#define IAP_CMD_ERASE 52
+#define IAP_CMD_CHECK 53
+#define IAP_CMD_ID 54
+#define IAP_CMD_VERSION 55
+#define IAP_CMD_COMPARE 56
+
+#define IAP_RET_CMD_SUCCESS 0
+
+static unsigned long command[5];
+static unsigned long result[2];
+
+extern void iap_entry(unsigned long * command, unsigned long * result);
+
+/*-----------------------------------------------------------------------
+ *
+ */
+static int get_flash_sector(flash_info_t * info, ulong flash_addr)
+{
+ int i;
+
+ for(i = 1; i < (info->sector_count); i++) {
+ if (flash_addr < (info->start[i]))
+ break;
+ }
+
+ return (i-1);
+}
+
+/*-----------------------------------------------------------------------
+ * This function assumes that flash_addr is aligned on 512 bytes boundary
+ * in flash. This function also assumes that prepare have been called
+ * for the sector in question.
+ */
+int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
+{
+ int first_sector;
+ int last_sector;
+
+ first_sector = get_flash_sector(info, flash_addr);
+ last_sector = get_flash_sector(info, flash_addr + 512 - 1);
+
+ /* prepare sectors for write */
+ command[0] = IAP_CMD_PREPARE;
+ command[1] = first_sector;
+ command[2] = last_sector;
+ iap_entry(command, result);
+ if (result[0] != IAP_RET_CMD_SUCCESS) {
+ printf("IAP prepare failed\n");
+ return ERR_PROG_ERROR;
+ }
+
+ command[0] = IAP_CMD_COPY;
+ command[1] = flash_addr;
+ command[2] = COPY_BUFFER_LOCATION;
+ command[3] = 512;
+ command[4] = CFG_SYS_CLK_FREQ >> 10;
+ iap_entry(command, result);
+ if (result[0] != IAP_RET_CMD_SUCCESS) {
+ printf("IAP copy failed\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag;
+ int prot;
+ int sect;
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+ if (prot)
+ return ERR_PROTECTED;
+
+
+ flag = disable_interrupts();
+
+ printf ("Erasing %d sectors starting at sector %2d.\n"
+ "This make take some time ... ",
+ s_last - s_first + 1, s_first);
+
+ command[0] = IAP_CMD_PREPARE;
+ command[1] = s_first;
+ command[2] = s_last;
+ iap_entry(command, result);
+ if (result[0] != IAP_RET_CMD_SUCCESS) {
+ printf("IAP prepare failed\n");
+ return ERR_PROTECTED;
+ }
+
+ command[0] = IAP_CMD_ERASE;
+ command[1] = s_first;
+ command[2] = s_last;
+ command[3] = CFG_SYS_CLK_FREQ >> 10;
+ iap_entry(command, result);
+ if (result[0] != IAP_RET_CMD_SUCCESS) {
+ printf("IAP erase failed\n");
+ return ERR_PROTECTED;
+ }
+
+ if (flag)
+ enable_interrupts();
+
+ return ERR_OK;
+}
+
+int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr,
+ ulong cnt)
+{
+ int first_copy_size;
+ int last_copy_size;
+ int first_block;
+ int last_block;
+ int nbr_mid_blocks;
+ uchar memmap_value;
+ ulong i;
+ uchar* src_org;
+ uchar* dst_org;
+ int ret = ERR_OK;
+
+ src_org = src;
+ dst_org = (uchar*)addr;
+
+ first_block = addr / 512;
+ last_block = (addr + cnt) / 512;
+ nbr_mid_blocks = last_block - first_block - 1;
+
+ first_copy_size = 512 - (addr % 512);
+ last_copy_size = (addr + cnt) % 512;
+
+ debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, "
+ "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n",
+ (ulong)(first_block * 512),
+ (ulong)COPY_BUFFER_LOCATION,
+ (ulong)src,
+ (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
+ first_copy_size,
+ (ulong)COPY_BUFFER_LOCATION,
+ (ulong)(first_block * 512));
+
+ /* copy first block */
+ memcpy((void*)COPY_BUFFER_LOCATION,
+ (void*)(first_block * 512), 512);
+ memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
+ src, first_copy_size);
+ lpc2292_copy_buffer_to_flash(info, first_block * 512);
+ src += first_copy_size;
+ addr += first_copy_size;
+
+ /* copy middle blocks */
+ for (i = 0; i < nbr_mid_blocks; i++) {
+ debug("copy middle block: %lX -> %lX 512 bytes, "
+ "%lX -> %lX 512 bytes\n",
+ (ulong)src,
+ (ulong)COPY_BUFFER_LOCATION,
+ (ulong)COPY_BUFFER_LOCATION,
+ (ulong)addr);
+
+ memcpy((void*)COPY_BUFFER_LOCATION, src, 512);
+ lpc2292_copy_buffer_to_flash(info, addr);
+ src += 512;
+ addr += 512;
+ }
+
+
+ if (last_copy_size > 0) {
+ debug("copy last block: (1) %lX -> %lX 0x200 bytes, "
+ "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n",
+ (ulong)(last_block * 512),
+ (ulong)COPY_BUFFER_LOCATION,
+ (ulong)src,
+ (ulong)(COPY_BUFFER_LOCATION),
+ last_copy_size,
+ (ulong)COPY_BUFFER_LOCATION,
+ (ulong)addr);
+
+ /* copy last block */
+ memcpy((void*)COPY_BUFFER_LOCATION,
+ (void*)(last_block * 512), 512);
+ memcpy((void*)COPY_BUFFER_LOCATION,
+ src, last_copy_size);
+ lpc2292_copy_buffer_to_flash(info, addr);
+ }
+
+ /* verify write */
+ memmap_value = GET8(MEMMAP);
+
+ disable_interrupts();
+
+ PUT8(MEMMAP, 01); /* we must make sure that initial 64
+ bytes are taken from flash when we
+ do the compare */
+
+ for (i = 0; i < cnt; i++) {
+ if (*dst_org != *src_org){
+ printf("Write failed. Byte %lX differs\n", i);
+ ret = ERR_PROG_ERROR;
+ break;
+ }
+ dst_org++;
+ src_org++;
+ }
+
+ PUT8(MEMMAP, memmap_value);
+ enable_interrupts();
+
+ return ret;
+}
diff --git a/board/lpc2292sodimm/iap_entry.S b/cpu/arm720t/lpc2292/iap_entry.S
similarity index 100%
rename from board/lpc2292sodimm/iap_entry.S
rename to cpu/arm720t/lpc2292/iap_entry.S
diff --git a/board/lpc2292sodimm/mmc.c b/cpu/arm720t/lpc2292/mmc.c
similarity index 96%
rename from board/lpc2292sodimm/mmc.c
rename to cpu/arm720t/lpc2292/mmc.c
index 1c0922f..fd7f149b 100644
--- a/board/lpc2292sodimm/mmc.c
+++ b/cpu/arm720t/lpc2292/mmc.c
@@ -23,7 +23,7 @@
#include <part.h>
#include <fat.h>
#include "mmc_hw.h"
-#include "spi.h"
+#include <asm/arch/spi.h>
#ifdef CONFIG_MMC
@@ -44,7 +44,7 @@
unsigned long mmc_block_read(int dev,
unsigned long start,
lbaint_t blkcnt,
- unsigned long *buffer)
+ void *buffer)
{
unsigned long rc = 0;
unsigned char *p = (unsigned char *)buffer;
@@ -101,6 +101,9 @@
printf("mmc_init\n");
spi_init();
+ /* this meeds to be done twice */
+ mmc_hw_init();
+ udelay(1000);
mmc_hw_init();
mmc_hw_get_parameters();
diff --git a/board/lpc2292sodimm/mmc_hw.c b/cpu/arm720t/lpc2292/mmc_hw.c
similarity index 99%
rename from board/lpc2292sodimm/mmc_hw.c
rename to cpu/arm720t/lpc2292/mmc_hw.c
index 31f2a79..b4dc4a6 100644
--- a/board/lpc2292sodimm/mmc_hw.c
+++ b/cpu/arm720t/lpc2292/mmc_hw.c
@@ -20,7 +20,7 @@
#include <config.h>
#include <common.h>
#include <asm/arch/hardware.h>
-#include "spi.h"
+#include <asm/arch/spi.h>
#define MMC_Enable() PUT32(IO1CLR, 1l << 22)
#define MMC_Disable() PUT32(IO1SET, 1l << 22)
diff --git a/board/lpc2292sodimm/mmc_hw.h b/cpu/arm720t/lpc2292/mmc_hw.h
similarity index 100%
rename from board/lpc2292sodimm/mmc_hw.h
rename to cpu/arm720t/lpc2292/mmc_hw.h
diff --git a/board/lpc2292sodimm/spi.c b/cpu/arm720t/lpc2292/spi.c
similarity index 97%
rename from board/lpc2292sodimm/spi.c
rename to cpu/arm720t/lpc2292/spi.c
index 4ba1468..d296bda 100644
--- a/board/lpc2292sodimm/spi.c
+++ b/cpu/arm720t/lpc2292/spi.c
@@ -21,7 +21,7 @@
#include <common.h>
#include <asm/errno.h>
#include <asm/arch/hardware.h>
-#include "spi.h"
+#include <asm/arch/spi.h>
unsigned long spi_flags;
unsigned char spi_idle = 0x00;
diff --git a/cpu/mpc86xx/resetvec.S b/cpu/mpc86xx/resetvec.S
deleted file mode 100644
index 9a552f6..0000000
--- a/cpu/mpc86xx/resetvec.S
+++ /dev/null
@@ -1,2 +0,0 @@
- .section .resetvec,"ax"
- b _start
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 7134355..8bf03e1 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -380,7 +380,7 @@
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
}
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SOLIDCARD3))
+#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3))
/*
*As is these functs get called out of flash Not a horrible
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 10b4c18..c500d3f 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -20,7 +20,7 @@
* Jun Gu, Artesyn Technology, jung@artesyncp.com
* Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -42,6 +42,11 @@
* MA 02111-1307 USA
*/
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
#include <common.h>
#include <asm/processor.h>
#include <i2c.h>
@@ -246,25 +251,6 @@
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
#endif
-const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55}
-};
-
/* bank_parms is used to sort the bank sizes by descending order */
struct bank_param {
unsigned long cr;
@@ -278,46 +264,37 @@
#endif
void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value);
-unsigned char spd_read(uchar chip, uint addr);
+static unsigned char spd_read(uchar chip, uint addr);
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_volt_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_cfg0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_cfg1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_tr0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_tr1(void);
-void get_spd_info(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+#ifdef CONFIG_DDR_ECC
+static void program_ecc(unsigned long num_bytes);
+#endif
-void check_mem_type
-(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void check_volt_type
-(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_cfg0(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_cfg1(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_rtr (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_tr0 (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-void program_tr1 (void);
-
-void program_ecc (unsigned long num_bytes);
-
-unsigned
-long program_bxcr(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+static unsigned long program_bxcr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
/*
* This function is reading data from the DIMM module EEPROM over the SPD bus
@@ -328,7 +305,6 @@
* BUG: Don't handle ECC memory
* BUG: A few values in the TR register is currently hardcoded
*/
-
long int spd_sdram(void) {
unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
@@ -421,9 +397,8 @@
*/
while (1) {
mfsdram(mem_mcsts, mcsts);
- if ((mcsts & SDRAM_MCSTS_MRSC) != 0) {
+ if ((mcsts & SDRAM_MCSTS_MRSC) != 0)
break;
- }
}
/*
@@ -431,14 +406,17 @@
*/
program_tr1();
+#ifdef CONFIG_DDR_ECC
/*
- * if ECC is enabled, initialize parity bits
+ * If ecc is enabled, initialize the parity bits.
*/
+ program_ecc(total_size);
+#endif
return total_size;
}
-unsigned char spd_read(uchar chip, uint addr)
+static unsigned char spd_read(uchar chip, uint addr)
{
unsigned char data[2];
@@ -460,9 +438,9 @@
return 0;
}
-void get_spd_info(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long dimm_found;
@@ -480,14 +458,10 @@
if ((num_of_bytes != 0) && (total_size != 0)) {
dimm_populated[dimm_num] = TRUE;
dimm_found = TRUE;
-#if 0
- printf("DIMM slot %lu: populated\n", dimm_num);
-#endif
+ debug("DIMM slot %lu: populated\n", dimm_num);
} else {
dimm_populated[dimm_num] = FALSE;
-#if 0
- printf("DIMM slot %lu: Not populated\n", dimm_num);
-#endif
+ debug("DIMM slot %lu: Not populated\n", dimm_num);
}
}
@@ -497,9 +471,9 @@
}
}
-void check_mem_type(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned char dimm_type;
@@ -509,9 +483,7 @@
dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
switch (dimm_type) {
case 7:
-#if 0
- printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
-#endif
+ debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
break;
default:
printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
@@ -525,10 +497,9 @@
}
}
-
-void check_volt_type(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+static void check_volt_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long voltage_type;
@@ -541,18 +512,16 @@
dimm_num);
hang();
} else {
-#if 0
- printf("DIMM %lu voltage level supported.\n", dimm_num);
-#endif
+ debug("DIMM %lu voltage level supported.\n", dimm_num);
}
break;
}
}
}
-void program_cfg0(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+static void program_cfg0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long cfg0;
@@ -640,9 +609,9 @@
mtsdram(mem_cfg0, cfg0);
}
-void program_cfg1(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+static void program_cfg1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
{
unsigned long cfg1;
mfsdram(mem_cfg1, cfg1);
@@ -658,9 +627,9 @@
mtsdram(mem_cfg1, cfg1);
}
-void program_rtr (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long bus_period_x_10;
@@ -676,7 +645,6 @@
get_sys_info(&sys_info);
bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
@@ -719,9 +687,9 @@
mtsdram(mem_rtr, sdram_rtr);
}
-void program_tr0 (unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+static void program_tr0(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long tr0;
@@ -1001,13 +969,73 @@
break;
}
-#if 0
- printf("tr0: %x\n", tr0);
-#endif
+ debug("tr0: %x\n", tr0);
mtsdram(mem_tr0, tr0);
}
-void program_tr1 (void)
+static int short_mem_test(void)
+{
+ unsigned long i, j;
+ unsigned long bxcr_num;
+ unsigned long *membase;
+ const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+ mtdcr(memcfga, mem_b0cr + (bxcr_num << 2));
+ if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
+ /* Bank is enabled */
+ membase = (unsigned long*)
+ (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
+
+ /*
+ * Run the short memory test
+ */
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
+
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((unsigned long)&(membase[j]));
+ return 0;
+ }
+ ppcDcbf((unsigned long)&(membase[j]));
+ }
+
+ if (j < NUMMEMWORDS)
+ return 0;
+ }
+
+ /*
+ * see if the rdclt value passed
+ */
+ if (i < NUMMEMTESTS)
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static void program_tr1(void)
{
unsigned long tr0;
unsigned long tr1;
@@ -1015,8 +1043,7 @@
unsigned long ecc_temp;
unsigned long dlycal;
unsigned long dly_val;
- unsigned long i, j, k;
- unsigned long bxcr_num;
+ unsigned long k;
unsigned long max_pass_length;
unsigned long current_pass_length;
unsigned long current_fail_length;
@@ -1029,7 +1056,6 @@
unsigned char window_found;
unsigned char fail_found;
unsigned char pass_found;
- unsigned long * membase;
PPC440_SYS_INFO sys_info;
/*
@@ -1079,55 +1105,16 @@
window_found = FALSE;
fail_found = FALSE;
pass_found = FALSE;
-#ifdef DEBUG
- printf("Starting memory test ");
-#endif
+ debug("Starting memory test ");
+
for (k = 0; k < NUMHALFCYCLES; k++) {
- for (rdclt = 0; rdclt < dly_val; rdclt++) {
+ for (rdclt = 0; rdclt < dly_val; rdclt++) {
/*
* Set the timing reg for the test.
*/
mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
- for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
- mtdcr(memcfga, mem_b0cr + (bxcr_num<<2));
- if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
- /* Bank is enabled */
- membase = (unsigned long*)
- (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
-
- /*
- * Run the short memory test
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((unsigned long)&(membase[j]));
- break;
- }
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- if (j < NUMMEMWORDS) {
- break;
- }
- }
-
- /*
- * see if the rdclt value passed
- */
- if (i < NUMMEMTESTS) {
- break;
- }
- }
- }
-
- if (bxcr_num == MAXBXCR) {
+ if (short_mem_test()) {
if (fail_found == TRUE) {
pass_found = TRUE;
if (current_pass_length == 0) {
@@ -1157,9 +1144,8 @@
}
}
}
-#ifdef DEBUG
- printf(".");
-#endif
+ debug(".");
+
if (window_found == TRUE) {
break;
}
@@ -1167,9 +1153,7 @@
tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
rdclt_offset += dly_val;
}
-#ifdef DEBUG
- printf("\n");
-#endif
+ debug("\n");
/*
* make sure we find the window
@@ -1218,18 +1202,17 @@
}
tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
-#if 0
- printf("tr1: %x\n", tr1);
-#endif
+ debug("tr1: %x\n", tr1);
+
/*
* program SDRAM Timing Register 1 TR1
*/
mtsdram(mem_tr1, tr1);
}
-unsigned long program_bxcr(unsigned long* dimm_populated,
- unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+static unsigned long program_bxcr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long bank_base_addr;
@@ -1262,8 +1245,8 @@
#ifdef CONFIG_BAMBOO
/*
* This next section is hardware dependent and must be programmed
- * to match the hardware. For bammboo, the following holds...
- * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0
+ * to match the hardware. For bamboo, the following holds...
+ * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard)
* 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
* 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
* 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
@@ -1273,10 +1256,12 @@
ctrl_bank_num[1] = 1;
ctrl_bank_num[2] = 3;
#else
+ /*
+ * Ocotea, Ebony and the other IBM/AMCC eval boards have
+ * 2 DIMM slots with each max 2 banks
+ */
ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 1;
- ctrl_bank_num[2] = 2;
- ctrl_bank_num[3] = 3;
+ ctrl_bank_num[1] = 2;
#endif
/*
@@ -1290,6 +1275,8 @@
num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+ debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num,
+ num_row_addr, num_col_addr, num_banks);
/*
* Set the SDRAM0_BxCR regs
@@ -1354,9 +1341,12 @@
cr |= SDRAM_BXCR_SDBE;
for (i = 0; i < num_banks; i++) {
- bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].bank_size_bytes =
- (4 * 1024 * 1024) * bank_size_id;
- bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].cr = cr;
+ bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
+ (4 << 20) * bank_size_id;
+ bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
+ debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
+ dimm_num, i, ctrl_bank_num[dimm_num]+i,
+ bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
}
}
}
@@ -1400,13 +1390,15 @@
bank_parms[sorted_bank_num[bx_cr_num]].cr;
mtdcr(memcfgd, temp);
bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
+ debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp);
}
}
return(bank_base_addr);
}
-void program_ecc (unsigned long num_bytes)
+#ifdef CONFIG_DDR_ECC
+static void program_ecc(unsigned long num_bytes)
{
unsigned long bank_base_addr;
unsigned long current_address;
@@ -1425,14 +1417,12 @@
bank_base_addr = CFG_SDRAM_BASE;
if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
- mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
- SDRAM_CFG0_MCHK_GEN);
+ mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_GEN);
- if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) {
+ if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32)
address_increment = 4;
- } else {
+ else
address_increment = 8;
- }
current_address = (unsigned long)(bank_base_addr);
end_address = (unsigned long)(bank_base_addr) + num_bytes;
@@ -1446,4 +1436,5 @@
SDRAM_CFG0_MCHK_CHK);
}
}
+#endif /* CONFIG_DDR_ECC */
#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 2ecd3e4..48b9ee2 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -465,7 +465,11 @@
* Set the SDRAM Clock Timing Register
*-----------------------------------------------------------------*/
mfsdram(SDRAM_CLKTR, val);
+#ifdef CFG_44x_DDR2_CKTR_180
+ mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV);
+#else
mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG);
+#endif
/*------------------------------------------------------------------
* Program the BxCF registers.
@@ -1117,7 +1121,8 @@
modt3 = 0x00000000;
}
if (total_rank == 4) {
- codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | CALC_ODT_R(2) | CALC_ODT_R(3);
+ codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
+ CALC_ODT_R(2) | CALC_ODT_R(3);
modt0 = CALC_ODT_RW(2);
modt1 = 0x00000000;
modt2 = CALC_ODT_RW(0);
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 8e6bc84..c07bc0c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -139,6 +139,7 @@
"Reserved",
"I2C (Addr 0x50)",
};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' };
#endif
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
@@ -149,6 +150,7 @@
"I2C (Addr 0x54)",
"I2C (Addr 0x50)",
};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D'};
#endif
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
@@ -163,6 +165,7 @@
"PCI",
"I2C (Addr 0x52)",
};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
#endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
@@ -177,6 +180,7 @@
"PCI",
"I2C (Addr 0x52)",
};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
#endif
#if defined(CONFIG_405EZ)
@@ -199,6 +203,8 @@
"SPI (slow)",
"I2C (Addr 0x50)",
};
+static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \
+ 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' };
#endif
#if defined(SDR0_PINSTP_SHIFT)
@@ -427,7 +433,7 @@
printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
#endif /* I2C_BOOTROM */
#if defined(SDR0_PINSTP_SHIFT)
- printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A');
+ printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]);
printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
#endif /* SDR0_PINSTP_SHIFT */
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 08dfc32..f63fc79 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -3,7 +3,7 @@
* Platform independend driver for NDFC (NanD Flash Controller)
* integrated into EP440 cores
*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* Based on original work by
@@ -38,7 +38,9 @@
#include <nand.h>
#include <linux/mtd/ndfc.h>
+#include <linux/mtd/nand_ecc.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <ppc4xx.h>
static u8 hwctl = 0;
@@ -70,11 +72,11 @@
ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
if (hwctl & 0x1)
- out8(base + NDFC_CMD, byte);
+ out_8((u8 *)(base + NDFC_CMD), byte);
else if (hwctl & 0x2)
- out8(base + NDFC_ALE, byte);
+ out_8((u8 *)(base + NDFC_ALE), byte);
else
- out8(base + NDFC_DATA, byte);
+ out_8((u8 *)(base + NDFC_DATA), byte);
}
static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
@@ -82,7 +84,7 @@
struct nand_chip *this = mtdinfo->priv;
ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
- return (in8(base + NDFC_DATA));
+ return (in_8((u8 *)(base + NDFC_DATA)));
}
static int ndfc_dev_ready(struct mtd_info *mtdinfo)
@@ -90,17 +92,41 @@
struct nand_chip *this = mtdinfo->priv;
ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
- while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY))
+ while (!(in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY))
;
return 1;
}
-#ifndef CONFIG_NAND_SPL
-/*
- * Don't use these speedup functions in NAND boot image, since the image
- * has to fit into 4kByte.
- */
+static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ u32 ccr;
+
+ ccr = in_be32((u32 *)(base + NDFC_CCR));
+ ccr |= NDFC_CCR_RESET_ECC;
+ out_be32((u32 *)(base + NDFC_CCR), ccr);
+}
+
+static int ndfc_calculate_ecc(struct mtd_info *mtdinfo,
+ const u_char *dat, u_char *ecc_code)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc;
+ u32 ecc;
+ u8 *p = (u8 *)&ecc;
+
+ ecc = in_be32((u32 *)(base + NDFC_ECC));
+
+ /* The NDFC uses Smart Media (SMC) bytes order
+ */
+ ecc_code[0] = p[2];
+ ecc_code[1] = p[1];
+ ecc_code[2] = p[3];
+
+ return 0;
+}
/*
* Speedups for buffer read/write/verify
@@ -116,9 +142,14 @@
uint32_t *p = (uint32_t *) buf;
for (;len > 0; len -= 4)
- *p++ = in32(base + NDFC_DATA);
+ *p++ = in_be32((u32 *)(base + NDFC_DATA));
}
+#ifndef CONFIG_NAND_SPL
+/*
+ * Don't use these speedup functions in NAND boot image, since the image
+ * has to fit into 4kByte.
+ */
static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
@@ -126,7 +157,7 @@
uint32_t *p = (uint32_t *) buf;
for (; len > 0; len -= 4)
- out32(base + NDFC_DATA, *p++);
+ out_be32((u32 *)(base + NDFC_DATA), *p++);
}
static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
@@ -136,7 +167,7 @@
uint32_t *p = (uint32_t *) buf;
for (; len > 0; len -= 4)
- if (*p++ != in32(base + NDFC_DATA))
+ if (*p++ != in_be32((u32 *)(base + NDFC_DATA)))
return -1;
return 0;
@@ -153,8 +184,8 @@
ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
/* Set NandFlash Core Configuration Register */
- /* 1col x 2 rows */
- out32(base + NDFC_CCR, 0x00000000 | (cs << 24));
+ /* 1 col x 2 rows */
+ out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24));
}
int board_nand_init(struct nand_chip *nand)
@@ -162,16 +193,19 @@
int cs = (ulong)nand->IO_ADDR_W & 0x00000003;
ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc;
- nand->eccmode = NAND_ECC_SOFT;
-
nand->hwcontrol = ndfc_hwcontrol;
nand->read_byte = ndfc_read_byte;
+ nand->read_buf = ndfc_read_buf;
nand->write_byte = ndfc_write_byte;
nand->dev_ready = ndfc_dev_ready;
+ nand->eccmode = NAND_ECC_HW3_256;
+ nand->enable_hwecc = ndfc_enable_hwecc;
+ nand->calculate_ecc = ndfc_calculate_ecc;
+ nand->correct_data = nand_correct_data;
+
#ifndef CONFIG_NAND_SPL
nand->write_buf = ndfc_write_buf;
- nand->read_buf = ndfc_read_buf;
nand->verify_buf = ndfc_verify_buf;
#else
/*
@@ -187,7 +221,7 @@
* Select required NAND chip in NDFC
*/
board_nand_select_device(nand, cs);
- out32(base + NDFC_BCFG0 + (cs << 2), 0x80002222);
+ out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222);
return 0;
}
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 85660b4..78d0042 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -110,6 +110,13 @@
# endif
#endif /* CFG_INIT_DCACHE_CS */
+#define function_prolog(func_name) .text; \
+ .align 2; \
+ .globl func_name; \
+ func_name:
+#define function_epilog(func_name) .type func_name,@function; \
+ .size func_name,.-func_name
+
/* We don't want the MMU yet.
*/
#undef MSR_KERNEL
@@ -148,7 +155,9 @@
* NAND U-Boot image is started from offset 0
*/
.text
+#if defined(CONFIG_440)
bl reconfig_tlb0
+#endif
GET_GOT
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
@@ -388,8 +397,9 @@
2:
#if defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/*
- * Enable internal SRAM
+ * Enable internal SRAM (only on 440EPx/GRx, 440EP/GR have no OCM)
*/
lis r2,0x7fff
ori r2,r2,0xffff
@@ -399,6 +409,45 @@
mfdcr r1,isram0_pmeg
and r1,r1,r2 /* Disable pwr mgmt */
mtdcr isram0_pmeg,r1
+#endif
+#if defined(CONFIG_440EP)
+ /*
+ * On 440EP with no internal SRAM, we setup SDRAM very early
+ * and copy the NAND_SPL to SDRAM and jump to it
+ */
+ /* Clear Dcache to use as RAM */
+ addis r3,r0,CFG_INIT_RAM_ADDR@h
+ ori r3,r3,CFG_INIT_RAM_ADDR@l
+ addis r4,r0,CFG_INIT_RAM_END@h
+ ori r4,r4,CFG_INIT_RAM_END@l
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ran3
+ addi r5,r5,0x0001
+..d_ran3:
+ mtctr r5
+..d_ag3:
+ dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag3
+ /*----------------------------------------------------------------*/
+ /* Setup the stack in internal SRAM */
+ /*----------------------------------------------------------------*/
+ lis r1,CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CFG_INIT_SP_OFFSET@l
+ li r0,0
+ stwu r0,-4(r1)
+ stwu r0,-4(r1) /* Terminate call chain */
+
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ lis r0,RESET_VECTOR@h /* Address of reset vector */
+ ori r0,r0, RESET_VECTOR@l
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ stw r0,+12(r1) /* Save return addr (underflow vect) */
+ sync
+ bl early_sdram_init
+ sync
+#endif /* CONFIG_440EP */
/*
* Copy SPL from cache into internal SRAM
@@ -429,7 +478,7 @@
start_ram:
sync
isync
-#endif
+#endif /* CONFIG_NAND_SPL */
bl 3f
b _start
@@ -810,6 +859,38 @@
#endif /* CONFIG_405EZ */
#endif
+#ifdef CONFIG_NAND_SPL
+ /*
+ * Copy SPL from cache into internal SRAM
+ */
+ li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
+ mtctr r4
+ lis r2,CFG_NAND_BOOT_SPL_SRC@h
+ ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l
+ lis r3,CFG_NAND_BOOT_SPL_DST@h
+ ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
+spl_loop:
+ lwzu r4,4(r2)
+ stwu r4,4(r3)
+ bdnz spl_loop
+
+ /*
+ * Jump to code in RAM
+ */
+ bl 00f
+00: mflr r10
+ lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
+ ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
+ sub r10,r10,r3
+ addi r10,r10,28
+ mtlr r10
+ blr
+
+start_ram:
+ sync
+ isync
+#endif /* CONFIG_NAND_SPL */
+
/*----------------------------------------------------------------------- */
/* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
/*----------------------------------------------------------------------- */
@@ -920,12 +1001,16 @@
stw r0, +12(r1) /* Save return addr (underflow vect) */
#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */
+#ifdef CONFIG_NAND_SPL
+ bl nand_boot /* will not return */
+#else
GET_GOT /* initialize GOT access */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
/* NEVER RETURNS! */
bl board_init_f /* run first part of init code (from Flash) */
+#endif /* CONFIG_NAND_SPL */
#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
/*----------------------------------------------------------------------- */
@@ -1137,27 +1222,9 @@
lwz r1,GPR1(r1)
SYNC
rfci
-#endif /* CONFIG_NAND_SPL */
/* Cache functions.
*/
-invalidate_icache:
- iccci r0,r0 /* for 405, iccci invalidates the */
- blr /* entire I cache */
-
-invalidate_dcache:
- addi r6,0,0x0000 /* clear GPR 6 */
- /* Do loop for # of dcache congruence classes. */
- lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */
- ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
- /* NOTE: dccci invalidates both */
- mtctr r7 /* ways in the D cache */
-..dcloop:
- dccci 0,r6 /* invalidate line */
- addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */
- bdnz ..dcloop
- blr
-
flush_dcache:
addis r9,r0,0x0002 /* set mask for EE and CE msr bits */
ori r9,r9,0x8000
@@ -1255,24 +1322,6 @@
blr
/*------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
/* Function: out16 */
/* Description: Output 16 bits */
/*------------------------------------------------------------------------------- */
@@ -1291,15 +1340,6 @@
blr
/*------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
/* Function: out32r */
/* Description: Byte reverse and output 32 bits */
/*------------------------------------------------------------------------------- */
@@ -1327,15 +1367,6 @@
blr
/*------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/*------------------------------------------------------------------------------- */
/* Function: in32r */
/* Description: Input 32 bits and byte reverse */
/*------------------------------------------------------------------------------- */
@@ -1377,9 +1408,6 @@
sync
blr
-/*------------------------------------------------------------------------------*/
-
-#ifndef CONFIG_NAND_SPL
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
@@ -1644,8 +1672,105 @@
stw r0, 4(r7)
blr
+
+#if defined(CONFIG_440)
+/*----------------------------------------------------------------------------+
+| dcbz_area.
++----------------------------------------------------------------------------*/
+ function_prolog(dcbz_area)
+ rlwinm. r5,r4,0,27,31
+ rlwinm r5,r4,27,5,31
+ beq ..d_ra2
+ addi r5,r5,0x0001
+..d_ra2:mtctr r5
+..d_ag2:dcbz r0,r3
+ addi r3,r3,32
+ bdnz ..d_ag2
+ sync
+ blr
+ function_epilog(dcbz_area)
+
+/*----------------------------------------------------------------------------+
+| dflush. Assume 32K at vector address is cachable.
++----------------------------------------------------------------------------*/
+ function_prolog(dflush)
+ mfmsr r9
+ rlwinm r8,r9,0,15,13
+ rlwinm r8,r8,0,17,15
+ mtmsr r8
+ addi r3,r0,0x0000
+ mtspr dvlim,r3
+ mfspr r3,ivpr
+ addi r4,r0,1024
+ mtctr r4
+..dflush_loop:
+ lwz r6,0x0(r3)
+ addi r3,r3,32
+ bdnz ..dflush_loop
+ addi r3,r3,-32
+ mtctr r4
+..ag: dcbf r0,r3
+ addi r3,r3,-32
+ bdnz ..ag
+ sync
+ mtmsr r9
+ blr
+ function_epilog(dflush)
+#endif /* CONFIG_440 */
#endif /* CONFIG_NAND_SPL */
+/*------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0x0000(3)
+ blr
+
+invalidate_icache:
+ iccci r0,r0 /* for 405, iccci invalidates the */
+ blr /* entire I cache */
+
+invalidate_dcache:
+ addi r6,0,0x0000 /* clear GPR 6 */
+ /* Do loop for # of dcache congruence classes. */
+ lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */
+ ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
+ /* NOTE: dccci invalidates both */
+ mtctr r7 /* ways in the D cache */
+..dcloop:
+ dccci 0,r6 /* invalidate line */
+ addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */
+ bdnz ..dcloop
+ blr
/**************************************************************************/
/* PPC405EP specific stuff */
@@ -1892,13 +2017,6 @@
#endif /* CONFIG_405EP */
#if defined(CONFIG_440)
-#define function_prolog(func_name) .text; \
- .align 2; \
- .globl func_name; \
- func_name:
-#define function_epilog(func_name) .type func_name,@function; \
- .size func_name,.-func_name
-
/*----------------------------------------------------------------------------+
| mttlb3.
+----------------------------------------------------------------------------*/
@@ -1946,47 +2064,4 @@
TLBRE(3,3,0)
blr
function_epilog(mftlb1)
-
-/*----------------------------------------------------------------------------+
-| dcbz_area.
-+----------------------------------------------------------------------------*/
- function_prolog(dcbz_area)
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ra2
- addi r5,r5,0x0001
-..d_ra2:mtctr r5
-..d_ag2:dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag2
- sync
- blr
- function_epilog(dcbz_area)
-
-/*----------------------------------------------------------------------------+
-| dflush. Assume 32K at vector address is cachable.
-+----------------------------------------------------------------------------*/
- function_prolog(dflush)
- mfmsr r9
- rlwinm r8,r9,0,15,13
- rlwinm r8,r8,0,17,15
- mtmsr r8
- addi r3,r0,0x0000
- mtspr dvlim,r3
- mfspr r3,ivpr
- addi r4,r0,1024
- mtctr r4
-..dflush_loop:
- lwz r6,0x0(r3)
- addi r3,r3,32
- bdnz ..dflush_loop
- addi r3,r3,-32
- mtctr r4
-..ag: dcbf r0,r3
- addi r3,r3,-32
- bdnz ..ag
- sync
- mtmsr r9
- blr
- function_epilog(dflush)
#endif /* CONFIG_440 */
diff --git a/disk/part.c b/disk/part.c
old mode 100644
new mode 100755
index acc1a74..255b140
--- a/disk/part.c
+++ b/disk/part.c
@@ -180,6 +180,7 @@
(CONFIG_COMMANDS & CFG_CMD_SCSI) || \
(CONFIG_COMMANDS & CFG_CMD_USB) || \
defined(CONFIG_MMC) || \
+ (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
defined(CONFIG_SYSTEMACE) )
#if defined(CONFIG_MAC_PARTITION) || \
@@ -219,7 +220,8 @@
}
-int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info)
+int get_partition_info (block_dev_desc_t *dev_desc, int part
+ , disk_partition_t *info)
{
switch (dev_desc->part_type) {
#ifdef CONFIG_MAC_PARTITION
@@ -325,7 +327,8 @@
#else /* neither MAC nor DOS nor ISO partition configured */
-# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured!
+# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION
+# error nor CONFIG_ISO_PARTITION configured!
#endif
#endif /* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */
diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn
index 3b88f8b..ac56cca 100644
--- a/doc/README.mpc8641hpcn
+++ b/doc/README.mpc8641hpcn
@@ -96,14 +96,17 @@
tftp 1000000 u-boot.bin
protect off all
- erase fff00000 ffffffff
- cp.b 1000000 fff00100 80000
+ erase fff00000 +$filesize
+ cp.b 1000000 fff00000 $filesize
+
+or use tftpflash command:
+ run tftpflash
To Flash U-boot into the alternative bank (0xFF800000 - 0xFFBFFFFF):
tftp 1000000 u-boot.bin
- erase ffb00000 ffbfffff
- cp.b 1000000 ffb00100 80000
+ erase ffb00000 +$filesize
+ cp.b 1000000 ffb00000 $filesize
4. Memory Map
diff --git a/drivers/Makefile b/drivers/Makefile
index d68cba6..c7fcc3f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -30,7 +30,7 @@
COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
- e1000.o eepro100.o \
+ e1000.o eepro100.o enc28j60.o \
i8042.o inca-ip_sw.o keyboard.o \
lan91c96.o macb.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \
diff --git a/board/lpc2292sodimm/eth.c b/drivers/enc28j60.c
old mode 100644
new mode 100755
similarity index 80%
rename from board/lpc2292sodimm/eth.c
rename to drivers/enc28j60.c
index 249ab04..98303ac
--- a/board/lpc2292sodimm/eth.c
+++ b/drivers/enc28j60.c
@@ -17,9 +17,10 @@
#include <config.h>
#include <common.h>
+#ifdef CONFIG_ENC28J60
#include <net.h>
#include <asm/arch/hardware.h>
-#include "spi.h"
+#include <asm/arch/spi.h>
/*
* Control Registers in Bank 0
@@ -36,7 +37,7 @@
#define CTL_REG_ERXSTL 0x08
#define CTL_REG_ERXSTH 0x09
#define CTL_REG_ERXNDL 0x0A
-#define CTL_REG_ERXNDA 0x0B
+#define CTL_REG_ERXNDH 0x0B
#define CTL_REG_ERXRDPTL 0x0C
#define CTL_REG_ERXRDPTH 0x0D
#define CTL_REG_ERXWRPTL 0x0E
@@ -137,7 +138,10 @@
#define PHY_REG_PHID1 0x02
#define PHY_REG_PHID2 0x03
-
+/* taken from the Linux driver */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHLCON 0x14
/*
* Receive Filter Register (ERXFCON) bits
@@ -274,6 +278,9 @@
/* Use the lower memory for receiver buffer. See errata pt. 5 */
#define ENC_RX_BUF_START 0x0000
#define ENC_TX_BUF_START 0x1800
+/* taken from the Linux driver */
+#define ENC_RX_BUF_END 0x17ff
+#define ENC_TX_BUF_END 0x1fff
/* maximum frame length */
#define ENC_MAX_FRM_LEN 1518
@@ -293,6 +300,7 @@
static void encReset (void);
static void encInit (unsigned char *pEthAddr);
static unsigned short phyRead (unsigned char addr);
+static void phyWrite(unsigned char, unsigned short);
static void encPoll (void);
static void encRx (void);
@@ -318,10 +326,12 @@
#define RX_RESET_COUNTER 1000;
/*-----------------------------------------------------------------------------
- * Returns 0 when failes otherwize 1
+ * Always returns 0
*/
int eth_init (bd_t * bis)
{
+ unsigned char estatVal;
+
/* configure GPIO */
(*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
(*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
@@ -332,6 +342,14 @@
spi_init ();
+ /* taken from the Linux driver - dangerous stuff here! */
+ /* Wait for CLKRDY to become set (i.e., check that we can communicate with
+ the ENC) */
+ do
+ {
+ estatVal = m_nic_read(CTL_REG_ESTAT);
+ } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
+
/* initialize controller */
encReset ();
encInit (bis->bi_enetaddr);
@@ -353,6 +371,10 @@
m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
+ /* set ETXND */
+ m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
+ m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
+
/* set ETXST */
m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
@@ -360,9 +382,15 @@
/* write packet */
m_nic_write_data (length, (unsigned char *) packet);
- /* set ETXND */
- m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
- m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
+ /* taken from the Linux driver */
+ /* Verify that the internal transmit logic has not been altered by excessive
+ collisions. See Errata B4 12 and 14.
+ */
+ if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
/* set ECON1.TXRTS */
m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
@@ -423,8 +451,10 @@
volatile unsigned char estat_reg;
unsigned char pkt_cnt;
+#ifdef CONFIG_USE_IRQ
/* clear global interrupt enable bit in enc28j60 */
m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
estat_reg = m_nic_read (CTL_REG_ESTAT);
eir_reg = m_nic_read (CTL_REG_EIR);
@@ -462,8 +492,10 @@
m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
}
+#ifdef CONFIG_USE_IRQ
/* set global interrupt enable bit in enc28j60 */
m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
}
static void encRx (void)
@@ -473,6 +505,7 @@
unsigned short status;
unsigned char eir_reg;
unsigned char pkt_cnt = 0;
+ unsigned short rxbuf_rdpt;
/* switch to bank 0 */
m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
@@ -489,18 +522,19 @@
status = buffer[4];
status |= (unsigned short) buffer[5] << 8;
- if (pkt_len <= ENC_MAX_FRM_LEN) {
+ if (pkt_len <= ENC_MAX_FRM_LEN)
copy_len = pkt_len;
- } else {
+ else
copy_len = 0;
- /* p_priv->stats.rx_dropped++; */
- /* we will drop this packet */
- }
- if ((status & (1L << 7)) == 0) { /* check Received Ok bit */
+ if ((status & (1L << 7)) == 0) /* check Received Ok bit */
copy_len = 0;
- /* p_priv->stats.rx_errors++; */
- }
+
+ /* taken from the Linux driver */
+ /* check if next pointer is resonable */
+ if ((((unsigned int)next_pointer_msb << 8) |
+ (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
+ copy_len = 0;
if (copy_len > 0) {
m_nic_read_data (copy_len, buffer);
@@ -513,6 +547,22 @@
/* decrease packet counter */
m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+ /* taken from the Linux driver */
+ /* Only odd values should be written to ERXRDPTL,
+ * see errata B4 pt.13
+ */
+ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+ if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
+ m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
+ (m_nic_read(CTL_REG_ERXNDH) << 8 |
+ m_nic_read(CTL_REG_ERXNDL)))) {
+ m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
+ m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
+ } else {
+ m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
+ m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
+ }
+
/* move to bank 1 */
m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
@@ -535,8 +585,6 @@
eir_reg = m_nic_read (CTL_REG_EIR);
} while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
- m_nic_write (CTL_REG_ERXRDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERXRDPTH, next_pointer_msb);
}
static void encWriteReg (unsigned char regNo, unsigned char data)
@@ -700,12 +748,6 @@
/* sleep 1 ms. See errata pt. 2 */
udelay (1000);
-
-#if 0
- (*((volatile unsigned long *) IO1CLR)) &= ENC_RESET;
- mdelay (5);
- (*((volatile unsigned long *) IO1SET)) &= ENC_RESET;
-#endif
}
static void encInit (unsigned char *pEthAddr)
@@ -720,44 +762,21 @@
* Setup the buffer space. The reset values are valid for the
* other pointers.
*/
-#if 0
/* We shall not write to ERXST, see errata pt. 5. Instead we
have to make sure that ENC_RX_BUS_START is 0. */
m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
-#endif
+
+ /* taken from the Linux driver */
+ m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
+
m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
next_pointer_msb = (ENC_RX_BUF_START >> 8);
- /*
- * For tracking purposes, the ERXRDPT registers should be programmed with
- * the same value. This is the read pointer.
- */
- m_nic_write (CTL_REG_ERXRDPTL, (ENC_RX_BUF_START & 0xFF));
- m_nic_write_retry (CTL_REG_ERXRDPTH, (ENC_RX_BUF_START >> 8), 1);
-
- /* Setup receive filters. */
-
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
-
- /* OR-filtering, Unicast, CRC-check and broadcast */
- m_nic_write_retry (CTL_REG_ERXFCON,
- (ENC_RFR_UCEN | ENC_RFR_CRCEN | ENC_RFR_BCEN), 1);
-
- /* Wait for Oscillator Start-up Timer (OST). */
- while ((m_nic_read (CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY) == 0) {
- static int cnt = 0;
-
- if (cnt++ >= 1000) {
- cnt = 0;
- }
- }
-
/* verify identification */
phid1 = phyRead (PHY_REG_PHID1);
phid2 = phyRead (PHY_REG_PHID2);
@@ -780,16 +799,34 @@
/* switch to bank 2 */
m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- /* clear MAC reset bits */
- m_nic_write_retry (CTL_REG_MACON2, 0, 1);
/* enable MAC to receive frames */
- m_nic_write_retry (CTL_REG_MACON1, ENC_MACON1_MARXEN, 10);
+ /* added some bits from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON1
+ ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+ ,10);
/* configure pad, tx-crc and duplex */
- /* TODO maybe enable FRMLNEN */
- m_nic_write_retry (CTL_REG_MACON3,
- (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN), 10);
+ /* added a bit from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON3
+ ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+ ,10);
+
+ /* added 4 new lines from the Linux driver */
+ /* Allow infinite deferals if the medium is continously busy */
+ m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
+
+ /* Late collisions occur beyond 63 bytes */
+ m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
+
+ /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
+ m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
+
+ /*
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
+ * 0x0c for half-duplex. Nothing for full-duplex
+ */
+ m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
/* set maximum frame length */
m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
@@ -801,15 +838,6 @@
*/
m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
- /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
- m_nic_write_retry (CTL_REG_MAIPGL, 0x12, 10);
-
- /*
- * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
- * 0x0c for half-duplex. Nothing for full-duplex
- */
- m_nic_write_retry (CTL_REG_MAIPGH, 0x0C, 10);
-
/* set MAC address */
/* switch to bank 3 */
@@ -823,18 +851,35 @@
m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
/*
+ * PHY Initialization taken from the Linux driver
+ */
+
+ /* Prevent automatic loopback of data beeing transmitted by setting
+ ENC_PHCON2_HDLDIS */
+ phyWrite(PHY_REG_PHCON2, (1<<8));
+
+ /* LEDs configuration
+ * LEDA: LACFG = 0100 -> display link status
+ * LEDB: LBCFG = 0111 -> display TX & RX activity
+ * STRCH = 1 -> LED pulses
+ */
+ phyWrite(PHY_REG_PHLCON, 0x0472);
+
+ /* Reset PDPXMD-bit => half duplex */
+ phyWrite(PHY_REG_PHCON1, 0);
+
+ /*
* Receive settings
*/
- /* auto-increment RX-pointer when reading a received packet */
- m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_AUTOINC);
-
+#ifdef CONFIG_USE_IRQ
/* enable interrupts */
m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
}
/*****************************************************************************
@@ -864,6 +909,11 @@
/* set MICMD.MIIRD */
m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+ /* taken from the Linux driver */
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
/* poll MISTAT.BUSY bit until operation is complete */
while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
static int cnt = 0;
@@ -875,6 +925,11 @@
}
}
+ /* taken from the Linux driver */
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
/* clear MICMD.MIIRD */
m_nic_write (CTL_REG_MICMD, 0);
@@ -883,3 +938,46 @@
return ret;
}
+
+/*****************************************************************************
+ *
+ * Taken from the Linux driver.
+ * Description:
+ * Write PHY registers.
+ *
+ * NOTE! This function will change to Bank 3.
+ *
+ * Params:
+ * [in] addr address of the register to write to
+ * [in] data to be written
+ *
+ * Returns:
+ * None
+ */
+static void phyWrite(unsigned char addr, unsigned short data)
+{
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write(CTL_REG_MIREGADR, addr);
+
+ m_nic_write(CTL_REG_MIWRL, data & 0xff);
+ m_nic_write(CTL_REG_MIWRH, data >> 8);
+
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if(cnt++ >= 1000) {
+ cnt = 0;
+ }
+ }
+}
+
+#endif /* CONFIG_ENC28J60 */
diff --git a/drivers/nand/nand_ecc.c b/drivers/nand/nand_ecc.c
index f33be96..90274e6 100644
--- a/drivers/nand/nand_ecc.c
+++ b/drivers/nand/nand_ecc.c
@@ -40,6 +40,13 @@
#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
#include<linux/mtd/mtd.h>
+
+/*
+ * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(),
+ * only nand_correct_data() is needed
+ */
+
+#ifndef CONFIG_NAND_SPL
/*
* Pre-calculated 256-way 1 byte column parity
*/
@@ -62,90 +69,75 @@
0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
};
-
/**
- * nand_trans_result - [GENERIC] create non-inverted ECC
- * @reg2: line parity reg 2
- * @reg3: line parity reg 3
- * @ecc_code: ecc
- *
- * Creates non-inverted ECC code from line parity
- */
-static void nand_trans_result(u_char reg2, u_char reg3,
- u_char *ecc_code)
-{
- u_char a, b, i, tmp1, tmp2;
-
- /* Initialize variables */
- a = b = 0x80;
- tmp1 = tmp2 = 0;
-
- /* Calculate first ECC byte */
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Calculate second ECC byte */
- b = 0x80;
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Store two of the ECC bytes */
- ecc_code[0] = tmp1;
- ecc_code[1] = tmp2;
-}
-
-/**
- * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block
+ * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block
* @mtd: MTD block structure
* @dat: raw data
* @ecc_code: buffer for ECC
*/
-int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
{
- u_char idx, reg1, reg2, reg3;
- int j;
+ uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
+ int i;
/* Initialize variables */
reg1 = reg2 = reg3 = 0;
- ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
/* Build up column parity */
- for(j = 0; j < 256; j++) {
-
+ for(i = 0; i < 256; i++) {
/* Get CP0 - CP5 from table */
- idx = nand_ecc_precalc_table[dat[j]];
+ idx = nand_ecc_precalc_table[*dat++];
reg1 ^= (idx & 0x3f);
/* All bit XOR = 1 ? */
if (idx & 0x40) {
- reg3 ^= (u_char) j;
- reg2 ^= ~((u_char) j);
+ reg3 ^= (uint8_t) i;
+ reg2 ^= ~((uint8_t) i);
}
}
/* Create non-inverted ECC code from line parity */
- nand_trans_result(reg2, reg3, ecc_code);
+ tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */
+ tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
+ tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
+ tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
+ tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
+ tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
+ tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
+ tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
+
+ tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */
+ tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
+ tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
+ tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
+ tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
+ tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
+ tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
+ tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
/* Calculate final ECC code */
- ecc_code[0] = ~ecc_code[0];
- ecc_code[1] = ~ecc_code[1];
+#ifdef CONFIG_MTD_NAND_ECC_SMC
+ ecc_code[0] = ~tmp2;
+ ecc_code[1] = ~tmp1;
+#else
+ ecc_code[0] = ~tmp1;
+ ecc_code[1] = ~tmp2;
+#endif
ecc_code[2] = ((~reg1) << 2) | 0x03;
+
return 0;
}
+#endif /* CONFIG_NAND_SPL */
+
+static inline int countbits(uint32_t byte)
+{
+ int res = 0;
+
+ for (;byte; byte >>= 1)
+ res += byte & 0x01;
+ return res;
+}
/**
* nand_correct_data - [NAND Interface] Detect and correct bit error(s)
@@ -156,88 +148,52 @@
*
* Detect and correct a 1 bit error for 256 byte block
*/
-int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+int nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
{
- u_char a, b, c, d1, d2, d3, add, bit, i;
+ uint8_t s0, s1, s2;
- /* Do error detection */
- d1 = calc_ecc[0] ^ read_ecc[0];
- d2 = calc_ecc[1] ^ read_ecc[1];
- d3 = calc_ecc[2] ^ read_ecc[2];
-
- if ((d1 | d2 | d3) == 0) {
- /* No errors */
+#ifdef CONFIG_MTD_NAND_ECC_SMC
+ s0 = calc_ecc[0] ^ read_ecc[0];
+ s1 = calc_ecc[1] ^ read_ecc[1];
+ s2 = calc_ecc[2] ^ read_ecc[2];
+#else
+ s1 = calc_ecc[0] ^ read_ecc[0];
+ s0 = calc_ecc[1] ^ read_ecc[1];
+ s2 = calc_ecc[2] ^ read_ecc[2];
+#endif
+ if ((s0 | s1 | s2) == 0)
return 0;
- }
- else {
- a = (d1 ^ (d1 >> 1)) & 0x55;
- b = (d2 ^ (d2 >> 1)) & 0x55;
- c = (d3 ^ (d3 >> 1)) & 0x54;
- /* Found and will correct single bit error in the data */
- if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
- c = 0x80;
- add = 0;
- a = 0x80;
- for (i=0; i<4; i++) {
- if (d1 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- c = 0x80;
- for (i=0; i<4; i++) {
- if (d2 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- bit = 0;
- b = 0x04;
- c = 0x80;
- for (i=0; i<3; i++) {
- if (d3 & c)
- bit |= b;
- c >>= 2;
- b >>= 1;
- }
- b = 0x01;
- a = dat[add];
- a ^= (b << bit);
- dat[add] = a;
- return 1;
- } else {
- i = 0;
- while (d1) {
- if (d1 & 0x01)
- ++i;
- d1 >>= 1;
- }
- while (d2) {
- if (d2 & 0x01)
- ++i;
- d2 >>= 1;
- }
- while (d3) {
- if (d3 & 0x01)
- ++i;
- d3 >>= 1;
- }
- if (i == 1) {
- /* ECC Code Error Correction */
- read_ecc[0] = calc_ecc[0];
- read_ecc[1] = calc_ecc[1];
- read_ecc[2] = calc_ecc[2];
- return 2;
- }
- else {
- /* Uncorrectable Error */
- return -1;
- }
- }
+ /* Check for a single bit error */
+ if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
+ ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
+ ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
+
+ uint32_t byteoffs, bitnum;
+
+ byteoffs = (s1 << 0) & 0x80;
+ byteoffs |= (s1 << 1) & 0x40;
+ byteoffs |= (s1 << 2) & 0x20;
+ byteoffs |= (s1 << 3) & 0x10;
+
+ byteoffs |= (s0 >> 4) & 0x08;
+ byteoffs |= (s0 >> 3) & 0x04;
+ byteoffs |= (s0 >> 2) & 0x02;
+ byteoffs |= (s0 >> 1) & 0x01;
+
+ bitnum = (s2 >> 5) & 0x04;
+ bitnum |= (s2 >> 4) & 0x02;
+ bitnum |= (s2 >> 3) & 0x01;
+
+ dat[byteoffs] ^= (1 << bitnum);
+
+ return 1;
}
- /* Should never happen */
+ if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
+ return 1;
+
return -1;
}
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
old mode 100644
new mode 100755
index a823b5a..3007608
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -59,7 +59,8 @@
if (cur_dev == NULL)
return -1;
if (cur_dev->block_read) {
- return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr);
+ return cur_dev->block_read (cur_dev->dev
+ , startblock, getsize, (unsigned long *)bufptr);
}
return -1;
}
@@ -89,8 +90,11 @@
part_offset=0;
}
else {
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || defined(CONFIG_SYSTEMACE)
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
+ (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
+ (CONFIG_COMMANDS & CFG_CMD_USB) || \
+ (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \
+ defined(CONFIG_SYSTEMACE) )
disk_partition_t info;
if(!get_partition_info(dev_desc, part_no, &info)) {
part_offset = info.start;
@@ -993,7 +997,8 @@
memcpy (vol_label, volinfo.volume_label, 11);
vol_label[11] = '\0';
volinfo.fs_type[5]='\0';
- printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label);
+ printf("Partition %d: Filesystem: %s \"%s\"\n"
+ ,cur_part,volinfo.fs_type,vol_label);
return 0;
}
diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h
index 1e9cd41..3056ca7 100644
--- a/include/asm-arm/arch-arm720t/hardware.h
+++ b/include/asm-arm/arch-arm720t/hardware.h
@@ -36,8 +36,6 @@
/* include armadillo specific hardware file if there was one */
#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
/* include IntegratorCP/CM720T specific hardware file if there was one */
-#elif defined(CONFIG_LPC2292)
-#include <asm-arm/arch-arm720t/lpc2292_registers.h>
#else
#error No hardware file defined for this configuration
#endif
diff --git a/include/asm-arm/arch-lpc2292/hardware.h b/include/asm-arm/arch-lpc2292/hardware.h
new file mode 100644
index 0000000..fd2b464
--- /dev/null
+++ b/include/asm-arm/arch-lpc2292/hardware.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#if defined(CONFIG_LPC2292)
+#include <asm-arm/arch-lpc2292/lpc2292_registers.h>
+#else
+#error No hardware file defined for this configuration
+#endif
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-arm720t/lpc2292_registers.h b/include/asm-arm/arch-lpc2292/lpc2292_registers.h
similarity index 100%
rename from include/asm-arm/arch-arm720t/lpc2292_registers.h
rename to include/asm-arm/arch-lpc2292/lpc2292_registers.h
diff --git a/include/asm-arm/arch-arm720t/mmc.h b/include/asm-arm/arch-lpc2292/mmc.h
similarity index 100%
rename from include/asm-arm/arch-arm720t/mmc.h
rename to include/asm-arm/arch-lpc2292/mmc.h
diff --git a/board/lpc2292sodimm/spi.h b/include/asm-arm/arch-lpc2292/spi.h
similarity index 100%
rename from board/lpc2292sodimm/spi.h
rename to include/asm-arm/arch-lpc2292/spi.h
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index bbc9ba0..03289bc 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -105,6 +105,11 @@
__asm__ __volatile__ ("sync" : : : "memory");
}
+static inline void isync(void)
+{
+ __asm__ __volatile__ ("isync" : : : "memory");
+}
+
/* Enforce in-order execution of data I/O.
* No distinction between read/write on PPC; use eieio for all three.
*/
@@ -114,74 +119,90 @@
/*
* 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
+ *
+ * Read operations have additional twi & isync to make sure the read
+ * is actually performed (i.e. the data has come back) before we start
+ * executing any following instructions.
*/
-extern inline int in_8(volatile u8 *addr)
+#define __iomem
+extern inline int in_8(const volatile unsigned char __iomem *addr)
{
- int ret;
+ int ret;
- __asm__ __volatile__("lbz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr));
- return ret;
+ __asm__ __volatile__(
+ "sync; lbz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
}
-extern inline void out_8(volatile u8 *addr, int val)
+extern inline void out_8(volatile unsigned char __iomem *addr, int val)
{
- __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+ __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
}
-extern inline int in_le16(volatile u16 *addr)
+extern inline int in_le16(const volatile unsigned short __iomem *addr)
{
- int ret;
+ int ret;
- __asm__ __volatile__("lhbrx %0,0,%1; eieio" : "=r" (ret) :
- "r" (addr), "m" (*addr));
- return ret;
+ __asm__ __volatile__("sync; lhbrx %0,0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) :
+ "r" (addr), "m" (*addr));
+ return ret;
}
-extern inline int in_be16(volatile u16 *addr)
+extern inline int in_be16(const volatile unsigned short __iomem *addr)
{
- int ret;
+ int ret;
- __asm__ __volatile__("lhz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr));
- return ret;
+ __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
}
-extern inline void out_le16(volatile u16 *addr, int val)
+extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
{
- __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) :
- "r" (val), "r" (addr));
+ __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
+ "r" (val), "r" (addr));
}
-extern inline void out_be16(volatile u16 *addr, int val)
+extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
{
- __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+ __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
}
-extern inline unsigned in_le32(volatile u32 *addr)
+extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
{
- unsigned ret;
+ unsigned ret;
- __asm__ __volatile__("lwbrx %0,0,%1; eieio" : "=r" (ret) :
- "r" (addr), "m" (*addr));
- return ret;
+ __asm__ __volatile__("sync; lwbrx %0,0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) :
+ "r" (addr), "m" (*addr));
+ return ret;
}
-extern inline unsigned in_be32(volatile u32 *addr)
+extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
{
- unsigned ret;
+ unsigned ret;
- __asm__ __volatile__("lwz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr));
- return ret;
+ __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n"
+ "twi 0,%0,0;\n"
+ "isync" : "=r" (ret) : "m" (*addr));
+ return ret;
}
-extern inline void out_le32(volatile unsigned *addr, int val)
+extern inline void out_le32(volatile unsigned __iomem *addr, int val)
{
- __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) :
- "r" (val), "r" (addr));
+ __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
+ "r" (val), "r" (addr));
}
-extern inline void out_be32(volatile unsigned *addr, int val)
+extern inline void out_be32(volatile unsigned __iomem *addr, int val)
{
- __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+ __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
}
#endif
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index bbe3505..41daa2b 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -577,6 +577,7 @@
#define CONFIG_HOSTNAME unknown
#define CONFIG_ROOTPATH /opt/nfsroot
#define CONFIG_BOOTFILE uImage
+#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
@@ -592,10 +593,17 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
- "dtbaddr=400000\0" \
+ "dtbaddr=c00000\0" \
"dtbfile=mpc8641_hpcn.dtb\0" \
"en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
"dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
new file mode 100755
index 0000000..d588818
--- /dev/null
+++ b/include/configs/SMN42.h
@@ -0,0 +1,199 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Configuation settings for the SMN42 board from Siemens.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start u-boot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#undef CONFIG_INIT_CRITICAL /* undef for developing */
+
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
+#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
+#define CONFIG_LPC2292
+#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+
+#undef CONFIG_USE_IRQ /* don't need them anymore */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+
+/* enable I2C and select the hardware/software driver */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+/* this would be 0xAE if E0, E1 and E2 were pulled high */
+#define CFG_I2C_SLAVE 0xA0
+#define CFG_I2C_EEPROM_ADDR (0xA0 >> 1)
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
+#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/* not used but required by devices.c */
+#define CFG_I2C_SPEED 10000
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define SCL 0x00000004 /* P0.2 */
+#define SDA 0x00000008 /* P0.3 */
+
+#define I2C_READ ((GET32(IO0PIN) & SDA) ? 1 : 0)
+#define I2C_SDA(x) { if (x) PUT32(IO0SET, SDA); else PUT32(IO0CLR, SDA); }
+#define I2C_SCL(x) { if (x) PUT32(IO0SET, SCL); else PUT32(IO0CLR, SCL); }
+#define I2C_DELAY { udelay(100); }
+#define I2C_ACTIVE { unsigned int i2ctmp; \
+ i2ctmp = GET32(IO0DIR); \
+ i2ctmp |= SDA; \
+ PUT32(IO0DIR, i2ctmp); }
+#define I2C_TRISTATE { unsigned int i2ctmp; \
+ i2ctmp = GET32(IO0DIR); \
+ i2ctmp &= ~SDA; \
+ PUT32(IO0DIR, i2ctmp); }
+#endif /* CONFIG_SOFT_I2C */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_FAT | \
+ CFG_CMD_MMC | \
+ CFG_CMD_NET | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_PING)
+
+#define CONFIG_DOS_PARTITION
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 5
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "SMN42 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x81800000 /* memtest works on */
+#define CFG_MEMTEST_END 0x83000000 /* 24 MB in SRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x81000000 /* default load address */
+ /* for uClinux img is here*/
+
+#define CFG_SYS_CLK_FREQ 58982400 /* Hz */
+#define CFG_HZ 2048 /* decrementer freq in Hz */
+
+ /* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SRAM */
+#define PHYS_SDRAM_1 0x81000000 /* SRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB SRAM */
+
+/* This is the external flash */
+#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/*
+ * The first entry in CFG_FLASH_BANKS_LIST is a dummy, but it must be present.
+ */
+#define CFG_FLASH_BANKS_LIST { 0, PHYS_FLASH_1 }
+#define CFG_FLASH_ADDR0 0x555
+#define CFG_FLASH_ADDR1 0x2AA
+#define CFG_FLASH_ERASE_TOUT 16384 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
+
+#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+
+#define CFG_ENV_IS_IN_FLASH 1
+/* The Environment Sector is in the CPU-internal flash */
+#define CFG_FLASH_BASE 0
+#define CFG_ENV_OFFSET 0x3C000
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_MMC 1
+/* we use this ethernet chip */
+#define CONFIG_ENC28J60
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index b42cfb6..712668a 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -207,7 +207,7 @@
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
* of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index c72d933..0f447b0 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -109,6 +109,7 @@
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_FLASH_CFI /* The flash is CFI compatible */
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
@@ -122,6 +123,12 @@
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define _CFG_CMD_INCLUDE (CFG_CMD_ALL)
+#else
+#define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */
+#define _CFG_CMD_INCLUDE ((CFG_CMD_ALL) & ~(CFG_CMD_FLASH | CFG_CMD_IMLS))
+#endif
+
#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
@@ -132,6 +139,63 @@
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#endif
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller. sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
+#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
+#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (12 << 10)) /* Copy SPL here*/
+#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
+#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
+#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */
+#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
+#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */
+#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
+#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
+
+#define CFG_NAND_ECCSIZE 256
+#define CFG_NAND_ECCBYTES 3
+#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE 16
+#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
/*-----------------------------------------------------------------------
* RAM (CRAM)
*----------------------------------------------------------------------*/
@@ -209,7 +273,11 @@
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
"cp.b ${fileaddr} fffc0000 ${filesize};" \
"setenv filesize;saveenv\0" \
- "upd=run load;run update\0" \
+ "upd=run load update\0" \
+ "nload=tftp 200000 acadia/u-boot-nand.bin\0" \
+ "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
+ "setenv filesize;saveenv\0" \
+ "nupd=run nload nupdate\0" \
"kozio=bootm ffc60000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -233,24 +301,24 @@
#define CONFIG_SUPPORT_VFAT
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DTT | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NAND | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_USB)
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & _CFG_CMD_INCLUDE) | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DTT | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NAND | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_USB)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -312,12 +380,16 @@
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
-#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
-
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS 3
/* Memory Bank 0 (Flash) initialization */
#define CFG_EBC_PB0AP 0x03337200
#define CFG_EBC_PB0CR 0xfe0bc000
+/* Memory Bank 3 (NAND-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x018003c0
+#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000)
+
/* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/
/* Memory Bank 1 (CRAM) initialization */
#define CFG_EBC_PB1AP 0x030400c0
@@ -326,10 +398,24 @@
/* Memory Bank 2 (CRAM) initialization */
#define CFG_EBC_PB2AP 0x030400c0
#define CFG_EBC_PB2CR 0x020bc000
+#else
+#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+/* Memory Bank 0 (NAND-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x018003c0
+#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000)
-/* Memory Bank 3 (NAND-FLASH) initialization */
-#define CFG_EBC_PB3AP 0x018003c0
-#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000)
+/*
+ * When NAND-booting the CRAM EBC setup must be done in sync mode, since the
+ * NAND-SPL already initialized the CRAM and EBC to sync mode.
+ */
+/* Memory Bank 1 (CRAM) initialization */
+#define CFG_EBC_PB1AP 0x9C0201C0
+#define CFG_EBC_PB1CR 0x000bc000
+
+/* Memory Bank 2 (CRAM) initialization */
+#define CFG_EBC_PB2AP 0x9C0201C0
+#define CFG_EBC_PB2CR 0x020bc000
+#endif
/* Memory Bank 4 (CPLD) initialization */
#define CFG_EBC_PB4AP 0x04006000
@@ -341,9 +427,9 @@
* GPIO Setup
*----------------------------------------------------------------------*/
#define CFG_GPIO_CRAM_CLK 8
-#define CFG_GPIO_CRAM_WAIT 9
+#define CFG_GPIO_CRAM_WAIT 9 /* GPIO-In */
#define CFG_GPIO_CRAM_ADV 10
-#define CFG_GPIO_CRAM_CRE (32 + 21)
+#define CFG_GPIO_CRAM_CRE (32 + 21) /* GPIO-Out */
/*-----------------------------------------------------------------------
* Definitions for GPIO_0 setup (PPC405EZ specific)
@@ -365,10 +451,10 @@
* GPIO0[28-30] - Trace Outputs / PWM Inputs
* GPIO0[31] - PWM_8 I/O
*/
-#define CFG_GPIO0_TCR 0xC0000000
-#define CFG_GPIO0_OSRL 0x50000000
+#define CFG_GPIO0_TCR 0xC0A00000
+#define CFG_GPIO0_OSRL 0x50004400
#define CFG_GPIO0_OSRH 0x02000055
-#define CFG_GPIO0_ISR1L 0x00000000
+#define CFG_GPIO0_ISR1L 0x00001000
#define CFG_GPIO0_ISR1H 0x00000055
#define CFG_GPIO0_TSRL 0x02000000
#define CFG_GPIO0_TSRH 0x00000055
@@ -387,13 +473,13 @@
* GPIO1[16] - SPI_SS_1_N Output
* GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs
*/
-#define CFG_GPIO1_OSRH 0x55455555
+#define CFG_GPIO1_TCR 0xFFFF8414
#define CFG_GPIO1_OSRL 0x40000110
-#define CFG_GPIO1_ISR1H 0x00000000
+#define CFG_GPIO1_OSRH 0x55455555
#define CFG_GPIO1_ISR1L 0x15555445
-#define CFG_GPIO1_TSRH 0x00000000
+#define CFG_GPIO1_ISR1H 0x00000000
#define CFG_GPIO1_TSRL 0x00000000
-#define CFG_GPIO1_TCR 0xFFFF8014
+#define CFG_GPIO1_TSRH 0x00000000
/*
* Internal Definitions
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 6c2a360..f6f530c 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -173,7 +173,7 @@
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
* of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index db58a9f..763d1c7 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -50,7 +50,7 @@
*----------------------------------------------------------------------*/
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
-#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */
#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/
@@ -104,14 +104,11 @@
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
-/*
- * Define here the location of the environment variables (FLASH or EEPROM).
- * Note: DENX encourages to use redundant environment in FLASH.
- */
-#if 1
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
-#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
/*-----------------------------------------------------------------------
@@ -133,7 +130,7 @@
#ifdef CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
@@ -141,22 +138,89 @@
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#endif /* CFG_ENV_IS_IN_FLASH */
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller. sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
+#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
+#define CFG_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */
+#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
+#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
+#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */
+#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
+#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */
+#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
+#define CFG_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */
+
+#define CFG_NAND_ECCSIZE 256
+#define CFG_NAND_ECCBYTES 3
+#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE 16
+#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
/*-----------------------------------------------------------------------
* NAND FLASH
*----------------------------------------------------------------------*/
-#define CFG_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-#define CFG_NAND_CS 1
+#define CFG_MAX_NAND_DEVICE 2
+#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE
#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
+#define CFG_NAND_BASE_LIST { CFG_NAND_BASE, CFG_NAND_ADDR + 2 }
#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS 1
+#else
+#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+/* Memory Bank 0 (NAND-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x018003c0
+#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000)
+#endif
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------------- */
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
#undef CONFIG_DDR_ECC /* don't use ECC */
#define CFG_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */
-#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51}
+#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51}
+#define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */
/*-----------------------------------------------------------------------
* I2C
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
old mode 100644
new mode 100755
index 7e51523..7b6c695
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -1,12 +1,8 @@
/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Configuation settings for the EP7312 board.
- *
- * Modified to work on Armadillo HT1070 ARM720T board
- * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com
+ * Configuation settings for the LPC2292SODIMM board from Embedded Artists.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -31,7 +27,7 @@
#define __CONFIG_H
/*
- * If we are developing, we might want to start armboot from ram
+ * If we are developing, we might want to start u-boot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
#undef CONFIG_INIT_CRITICAL /* undef for developing */
@@ -46,7 +42,7 @@
#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
#define CONFIG_LPC2292
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
+#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
#undef CONFIG_USE_IRQ /* don't need them anymore */
@@ -70,7 +66,7 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
/*
* Supported commands
@@ -103,11 +99,12 @@
#define CFG_MEMTEST_START 0x40000000 /* memtest works on */
#define CFG_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/
+#define CFG_LOAD_ADDR 0x00040000 /* default load address for */
+ /* armadillo: kernel img is here*/
-#define CFG_SYS_CLK_FREQ 58982400 /* Hz */
+#define CFG_SYS_CLK_FREQ 58982400 /* Hz */
#define CFG_HZ 2048 /* decrementer freq in Hz */
/* valid baudrates */
@@ -154,5 +151,7 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_MMC 1
+/* we use this ethernet chip */
+#define CONFIG_ENC28J60
#endif /* __CONFIG_H */
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 9c8769b..045a144 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -135,7 +135,8 @@
*----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/
-#undef CONFIG_DDR_ECC /* no ECC support for now */
+#define CONFIG_DDR_ECC 1 /* with ECC support */
+#define CFG_44x_DDR2_CKTR_180 1 /* use 180 deg advance */
/*-----------------------------------------------------------------------
* I2C
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 6b6acfa..e4357b0 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -58,7 +58,7 @@
* 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB)
*/
-#define CONFIG_SOLIDCARD3 1
+#define CONFIG_SC3 1
#define CONFIG_4xx 1
#define CONFIG_405GP 1
@@ -134,7 +134,8 @@
#if 1 /* feel free to disable for development */
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n"
-#define CONFIG_AUTOBOOT_DELAY_STR "\n" /* 1st "password" */
+#define CONFIG_AUTOBOOT_DELAY_STR "\r" /* 1st "password" */
+#define CONFIG_AUTOBOOT_DELAY_STR2 "\n" /* 1st "password" */
#endif
/*
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index e1572ba..23243a4 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -168,12 +168,19 @@
/*
* Now the NAND chip has to be defined (no autodetection used!)
*/
-#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */
+#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */
#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
-#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */
-#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */
+#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */
+#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
+#define CFG_NAND_ECCSIZE 256
+#define CFG_NAND_ECCBYTES 3
+#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+#define CFG_NAND_OOBSIZE 16
+#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
+
#ifdef CFG_ENV_IS_IN_NAND
/*
* For NAND booting the environment is embedded in the U-Boot image. Please take
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index fd138a5..9888d11 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -226,7 +226,7 @@
* PCI Bus clocking configuration
*
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
* of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
*/
#define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 8624f4b..1978a32 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -80,16 +80,20 @@
* This address, however, is used to configure a 256M local bus
* window that includes the Config latch below.
*/
-#define CFG_LBC_OPTION_BASE 0xf0000000 /* Localbus Extension */
+#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */
#define CFG_LBC_OPTION_SIZE 256 /* 256MB */
/* There are various flash options used, we configure for the largest,
* which is 64Mbytes. The CFI works fine and will discover the proper
* sizes.
*/
-#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH 64M */
-#define CFG_BR0_PRELIM 0xFC001801 /* port size 32bit */
-#define CFG_OR0_PRELIM 0xFC000FF7 /* 64 MB Flash */
+#ifdef CONFIG_STXSSA_4M
+#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */
+#else
+#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */
+#endif
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */
+#define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7)
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
@@ -104,9 +108,9 @@
/* The configuration latch is Chip Select 1.
* It's an 8-bit latch in the lower 8 bits of the word.
*/
-#define CFG_LBC_CFGLATCH_BASE 0xfb000000 /* Base of config latch */
-#define CFG_BR1_PRELIM 0xfb001801 /* 32-bit port */
-#define CFG_OR1_PRELIM 0xffff0ff7 /* 64K is enough */
+#define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */
+#define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */
+#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
@@ -300,17 +304,20 @@
/* Environment - default config is in flash, see below */
#if 0 /* in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM 1
-#define CFG_ENV_OFFSET 0
-#define CFG_ENV_SIZE 2048
+# define CFG_ENV_IS_IN_EEPROM 1
+# define CFG_ENV_OFFSET 0
+# define CFG_ENV_SIZE 2048
#else /* in flash */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SECT_SIZE 0x40000
-
-#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x4000
-#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+# define CFG_ENV_IS_IN_FLASH 1
+# ifdef CONFIG_STXSSA_4M
+# define CFG_ENV_SECT_SIZE 0x20000
+# else /* default configuration - 64 MiB flash */
+# define CFG_ENV_SECT_SIZE 0x40000
+# endif
+# define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
+# define CFG_ENV_SIZE 0x4000
+# define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+# define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
diff --git a/include/ppc405.h b/include/ppc405.h
index fffae4d..71ad12e 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -556,6 +556,11 @@
#define sdricintstat 0x4510
#define SDR_NAND0_NDEN 0x80000000
+#define SDR_NAND0_NDBTEN 0x40000000
+#define SDR_NAND0_NDBADR_MASK 0x30000000
+#define SDR_NAND0_NDBPG_MASK 0x0f000000
+#define SDR_NAND0_NDAREN 0x00800000
+#define SDR_NAND0_NDRBEN 0x00400000
#define SDR_ULTRA0_NDGPIOBP 0x80000000
#define SDR_ULTRA0_CSN_MASK 0x78000000
@@ -563,6 +568,9 @@
#define SDR_ULTRA0_CSNSEL1 0x20000000
#define SDR_ULTRA0_CSNSEL2 0x10000000
#define SDR_ULTRA0_CSNSEL3 0x08000000
+#define SDR_ULTRA0_EBCRDYEN 0x04000000
+#define SDR_ULTRA0_SPISSINEN 0x02000000
+#define SDR_ULTRA0_NFSRSTEN 0x01000000
#define SDR_ULTRA1_LEDNENABLE 0x40000000
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 9e85cdd..c4fc580 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -76,7 +76,7 @@
extern int update_flash_size (int flash_size);
#endif
-#if defined(CONFIG_SOLIDCARD3)
+#if defined(CONFIG_SC3)
extern void sc3_read_eeprom(void);
#endif
@@ -820,7 +820,7 @@
#endif /* CONFIG_405GP, CONFIG_405EP */
#endif /* CFG_EXTBDINFO */
-#if defined(CONFIG_SOLIDCARD3)
+#if defined(CONFIG_SC3)
sc3_read_eeprom();
#endif
s = getenv ("ethaddr");
@@ -929,7 +929,7 @@
defined(CONFIG_KUP4X) || \
defined(CONFIG_LWMON) || \
defined(CONFIG_PCU_E) || \
- defined(CONFIG_SOLIDCARD3) || \
+ defined(CONFIG_SC3) || \
defined(CONFIG_W7O) || \
defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile
new file mode 100644
index 0000000..0d6828a
--- /dev/null
+++ b/nand_spl/board/amcc/acadia/Makefile
@@ -0,0 +1,104 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o resetvec.o
+COBJS = gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)gpio.c:
+ @rm -f $(obj)gpio.c
+ ln -s $(SRCTREE)/cpu/ppc4xx/gpio.c $(obj)gpio.c
+
+$(obj)ndfc.c:
+ @rm -f $(obj)ndfc.c
+ ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c
+
+$(obj)resetvec.S:
+ @rm -f $(obj)resetvec.S
+ ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+
+$(obj)start.S:
+ @rm -f $(obj)start.S
+ ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S
+
+# from board directory
+$(obj)memory.c:
+ @rm -f $(obj)memory.c
+ ln -s $(SRCTREE)/board/amcc/acadia/memory.c $(obj)memory.c
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+ @rm -f $(obj)nand_boot.c
+ ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+
+# from drivers/nand directory
+$(obj)nand_ecc.c:
+ @rm -f $(obj)nand_ecc.c
+ ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/amcc/acadia/config.mk b/nand_spl/board/amcc/acadia/config.mk
new file mode 100644
index 0000000..55069b4
--- /dev/null
+++ b/nand_spl/board/amcc/acadia/config.mk
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 405EZ Reference Platform (Acadia) board
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff,
+# in the last 4kBytes of memory space in cache.
+# We will copy this SPL into internal SRAM in start.S. So we set
+# TEXT_BASE to starting address in internal SRAM here.
+#
+TEXT_BASE = 0xF8003000
+
+# PAD_TO used to generate a 16kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 0x4000
+PAD_TO = 0xF8007000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/nand_spl/board/amcc/acadia/u-boot.lds b/nand_spl/board/amcc/acadia/u-boot.lds
new file mode 100644
index 0000000..018def1
--- /dev/null
+++ b/nand_spl/board/amcc/acadia/u-boot.lds
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc:common)
+SECTIONS
+{
+ .resetvec 0xF8003FFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .text :
+ {
+ start.o (.text)
+ nand_boot.o (.text)
+ ndfc.o (.text)
+
+ *(.text)
+ *(.fixup)
+ }
+ _etext = .;
+
+ .data :
+ {
+ *(.rodata*)
+ *(.data*)
+ *(.sdata*)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+ }
+
+ _edata = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss)
+ *(.bss)
+ }
+
+ _end = . ;
+}
diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile
new file mode 100644
index 0000000..0df86f9
--- /dev/null
+++ b/nand_spl/board/amcc/bamboo/Makefile
@@ -0,0 +1,100 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o init.o resetvec.o
+COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)ndfc.c:
+ @rm -f $(obj)ndfc.c
+ ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c
+
+$(obj)resetvec.S:
+ @rm -f $(obj)resetvec.S
+ ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S
+
+$(obj)start.S:
+ @rm -f $(obj)start.S
+ ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S
+
+# from board directory
+$(obj)init.S:
+ @rm -f $(obj)init.S
+ ln -s $(SRCTREE)/board/amcc/bamboo/init.S $(obj)init.S
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+ @rm -f $(obj)nand_boot.c
+ ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+
+# from drivers/nand directory
+$(obj)nand_ecc.c:
+ @rm -f $(obj)nand_ecc.c
+ ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/amcc/bamboo/config.mk b/nand_spl/board/amcc/bamboo/config.mk
new file mode 100644
index 0000000..f7ec751
--- /dev/null
+++ b/nand_spl/board/amcc/bamboo/config.mk
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 440EP Reference Platform (Bamboo) board
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff,
+# in the last 4kBytes of memory space in cache.
+# We will copy this SPL into instruction-cache in start.S. So we set
+# TEXT_BASE to starting address in i-cache here.
+#
+TEXT_BASE = 0x00800000
+
+# PAD_TO used to generate a 16kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 0x4000
+PAD_TO = 0x00804000
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c
new file mode 100644
index 0000000..4f09072
--- /dev/null
+++ b/nand_spl/board/amcc/bamboo/sdram.c
@@ -0,0 +1,92 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+static void wait_init_complete(void)
+{
+ u32 val;
+
+ do {
+ mfsdram(mem_mcsts, val);
+ } while (!(val & 0x80000000));
+}
+
+/*
+ * early_sdram_init()
+ *
+ * As the name already indicates, this function is called very early
+ * from start.S and configures the SDRAM with fixed values. This is needed,
+ * since the 440EP has no internal SRAM and the 4kB NAND_SPL loader has
+ * not enough free space to implement the complete I2C SPD DDR autodetection
+ * routines. Therefore the Bamboo only supports the onboard 64MBytes of SDRAM
+ * when booting from NAND flash.
+ */
+void early_sdram_init(void)
+{
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(sdr_srst, SDR0_SRST_DMC);
+ mtsdr(sdr_srst, 0x00000000);
+
+ /*
+ * Disable memory controller.
+ */
+ mtsdram(mem_cfg0, 0x00000000);
+
+ /*
+ * Setup some default
+ */
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(mem_b0cr, 0x00082001);
+ mtsdram(mem_tr0, 0x41094012);
+ mtsdram(mem_tr1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
+ mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/
+
+ /*
+ * Enable the controller, then wait for DCEN to complete
+ */
+ mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/
+ wait_init_complete();
+}
+
+long int initdram(int board_type)
+{
+ /*
+ * Nothing to do here, just return size of fixed SDRAM setup
+ */
+ return CFG_MBYTES_SDRAM << 20;
+}
diff --git a/nand_spl/board/amcc/bamboo/u-boot.lds b/nand_spl/board/amcc/bamboo/u-boot.lds
new file mode 100644
index 0000000..28228f8
--- /dev/null
+++ b/nand_spl/board/amcc/bamboo/u-boot.lds
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc:common)
+SECTIONS
+{
+ .resetvec 0x00800FFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .text :
+ {
+ start.o (.text)
+ init.o (.text)
+ nand_boot.o (.text)
+ sdram.o (.text)
+ ndfc.o (.text)
+
+ *(.text)
+ *(.fixup)
+ }
+ _etext = .;
+
+ .data :
+ {
+ *(.rodata*)
+ *(.data*)
+ *(.sdata*)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+ }
+
+ _edata = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss)
+ *(.bss)
+ }
+
+ _end = . ;
+}
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
index b42da8c..ec1be5a 100644
--- a/nand_spl/board/amcc/sequoia/Makefile
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2006
+# (C) Copyright 2006-2007
# Stefan Roese, DENX Software Engineering, sr@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -30,7 +30,7 @@
CFLAGS += -DCONFIG_NAND_SPL
SOBJS = start.o init.o resetvec.o
-COBJS = nand_boot.o ndfc.o sdram.o
+COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o
SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
@@ -85,6 +85,11 @@
@rm -f $(obj)nand_boot.c
ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c
+# from drivers/nand directory
+$(obj)nand_ecc.c:
+ @rm -f $(obj)nand_ecc.c
+ ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c
+
#########################################################################
$(obj)%.o: $(obj)%.S
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index a136fb7..840a596 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -24,27 +24,28 @@
#define CFG_NAND_READ_DELAY \
{ volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; }
-extern void board_nand_init(struct nand_chip *nand);
-extern void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd);
-extern void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte);
-extern u_char ndfc_read_byte(struct mtd_info *mtdinfo);
-extern int ndfc_dev_ready(struct mtd_info *mtdinfo);
-extern int jump_to_ram(ulong delta);
-extern int jump_to_uboot(ulong addr);
+static int nand_ecc_pos[] = CFG_NAND_ECCPOS;
-static int nand_is_bad_block(struct mtd_info *mtd, int block)
+extern void board_nand_init(struct nand_chip *nand);
+
+static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
{
struct nand_chip *this = mtd->priv;
- int page_addr = block * CFG_NAND_PAGE_COUNT;
+ int page_addr = page + block * CFG_NAND_PAGE_COUNT;
+
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
/* Begin command latch cycle */
this->hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, NAND_CMD_READOOB);
+ this->write_byte(mtd, cmd);
/* Set ALE and clear CLE to start address cycle */
this->hwcontrol(mtd, NAND_CTL_CLRCLE);
this->hwcontrol(mtd, NAND_CTL_SETALE);
/* Column address */
- this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */
+ this->write_byte(mtd, offs); /* A[7:0] */
this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */
this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */
#ifdef CFG_NAND_4_ADDR_CYCLE
@@ -62,6 +63,15 @@
else
CFG_NAND_READ_DELAY;
+ return 0;
+}
+
+static int nand_is_bad_block(struct mtd_info *mtd, int block)
+{
+ struct nand_chip *this = mtd->priv;
+
+ nand_command(mtd, block, 0, CFG_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);
+
/*
* Read on byte
*/
@@ -74,39 +84,46 @@
static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
{
struct nand_chip *this = mtd->priv;
- int page_addr = page + block * CFG_NAND_PAGE_COUNT;
+ u_char *ecc_calc;
+ u_char *ecc_code;
+ u_char *oob_data;
int i;
+ int eccsize = CFG_NAND_ECCSIZE;
+ int eccbytes = CFG_NAND_ECCBYTES;
+ int eccsteps = CFG_NAND_ECCSTEPS;
+ uint8_t *p = dst;
+ int stat;
- /* Begin command latch cycle */
- this->hwcontrol(mtd, NAND_CTL_SETCLE);
- this->write_byte(mtd, NAND_CMD_READ0);
- /* Set ALE and clear CLE to start address cycle */
- this->hwcontrol(mtd, NAND_CTL_CLRCLE);
- this->hwcontrol(mtd, NAND_CTL_SETALE);
- /* Column address */
- this->write_byte(mtd, 0); /* A[7:0] */
- this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */
- this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */
-#ifdef CFG_NAND_4_ADDR_CYCLE
- /* One more address cycle for devices > 32MiB */
- this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */
-#endif
- /* Latch in address */
- this->hwcontrol(mtd, NAND_CTL_CLRALE);
+ nand_command(mtd, block, page, 0, NAND_CMD_READ0);
- /*
- * Wait a while for the data to be ready
+ /* No malloc available for now, just use some temporary locations
+ * in SDRAM
*/
- if (this->dev_ready)
- this->dev_ready(mtd);
- else
- CFG_NAND_READ_DELAY;
+ ecc_calc = (u_char *)(CFG_SDRAM_BASE + 0x10000);
+ ecc_code = ecc_calc + 0x100;
+ oob_data = ecc_calc + 0x200;
- /*
- * Read page into buffer
- */
- for (i=0; i<CFG_NAND_PAGE_SIZE; i++)
- *dst++ = this->read_byte(mtd);
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ this->enable_hwecc(mtd, NAND_ECC_READ);
+ this->read_buf(mtd, p, eccsize);
+ this->calculate_ecc(mtd, p, &ecc_calc[i]);
+ }
+ this->read_buf(mtd, oob_data, CFG_NAND_OOBSIZE);
+
+ /* Pick the ECC bytes out of the oob data */
+ for (i = 0; i < CFG_NAND_ECCTOTAL; i++)
+ ecc_code[i] = oob_data[nand_ecc_pos[i]];
+
+ eccsteps = CFG_NAND_ECCSTEPS;
+ p = dst;
+
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ /* No chance to do something with the possible error message
+ * from correct_data(). We just hope that all possible errors
+ * are corrected by this routine.
+ */
+ stat = this->correct_data(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ }
return 0;
}