colibri_t20: add lcd display support
Add LCD display support defaulting to VESA VGA resolution. Different
resolutions configurable via device tree.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/dts/tegra20-colibri.dts b/arch/arm/dts/tegra20-colibri.dts
index 257ca27..bf14c6b 100644
--- a/arch/arm/dts/tegra20-colibri.dts
+++ b/arch/arm/dts/tegra20-colibri.dts
@@ -17,6 +17,17 @@
sdhci0 = "/sdhci@c8000600";
};
+ host1x {
+ status = "okay";
+ dc@54200000 {
+ status = "okay";
+ rgb {
+ status = "okay";
+ nvidia,panel = <&lcd_panel>;
+ };
+ };
+ };
+
usb@c5000000 {
dr_mode = "otg";
};
@@ -46,4 +57,22 @@
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
bus-width = <4>;
};
+
+ lcd_panel: panel {
+ clock = <25175000>;
+ xres = <640>;
+ yres = <480>;
+ left-margin = <48>; /* horizontal back porch */
+ right-margin = <16>; /* horizontal front porch */
+ hsync-len = <96>;
+ lower-margin = <11>; /* vertical front porch */
+ upper-margin = <31>; /* vertical back porch */
+ vsync-len = <2>;
+ hsync-active-high;
+ vsync-active-high;
+ nvidia,bits-per-pixel = <16>;
+ nvidia,pwm = <&pwm 0 0>;
+ nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ nvidia,panel-timings = <0 0 0 0>;
+ };
};