x86: Add basic support to queensbay platform and crownbay board
Implement minimum required functions for the basic support to
queensbay platform and crownbay board.
Currently the implementation is to call fsp_init() in the car_init().
We may move that call to cpu_init_f() in the future.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/x86/cpu/queensbay/Makefile b/arch/x86/cpu/queensbay/Makefile
new file mode 100644
index 0000000..ace04ca
--- /dev/null
+++ b/arch/x86/cpu/queensbay/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += tnc_car.o tnc_dram.o tnc.o
+obj-y += fsp_configs.o fsp_support.o
+obj-$(CONFIG_PCI) += tnc_pci.o
diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
new file mode 100644
index 0000000..8b9815f
--- /dev/null
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/post.h>
+#include <asm/arch/fsp/fsp_support.h>
+#include <asm/processor.h>
+
+int arch_cpu_init(void)
+{
+ post_code(POST_CPU_INIT);
+#ifdef CONFIG_SYS_X86_TSC_TIMER
+ timer_set_base(rdtsc());
+#endif
+
+ return x86_cpu_init_f();
+}
+
+int print_cpuinfo(void)
+{
+ post_code(POST_CPU_INFO);
+ return default_print_cpuinfo();
+}
+
+void reset_cpu(ulong addr)
+{
+ /* cold reset */
+ outb(0x06, PORT_RESET);
+}
+
+void board_final_cleanup(void)
+{
+ u32 status;
+
+ /* call into FspNotify */
+ debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
+ status = fsp_notify(NULL, INIT_PHASE_BOOT);
+ if (status != FSP_SUCCESS)
+ debug("fail, error code %x\n", status);
+ else
+ debug("OK\n");
+
+ return;
+}
diff --git a/arch/x86/cpu/queensbay/tnc_car.S b/arch/x86/cpu/queensbay/tnc_car.S
new file mode 100644
index 0000000..6834a64
--- /dev/null
+++ b/arch/x86/cpu/queensbay/tnc_car.S
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/post.h>
+
+.globl car_init
+car_init:
+ /*
+ * Note: ebp holds the BIST value (built-in self test) so far, but ebp
+ * will be destroyed through the FSP call, thus we have to test the
+ * BIST value here before we call into FSP.
+ */
+ test %ebp, %ebp
+ jz car_init_start
+ post_code(POST_BIST_FAILURE)
+ jmp die
+
+car_init_start:
+ post_code(POST_CAR_START)
+ lea find_fsp_header_romstack, %esp
+ jmp find_fsp_header
+
+find_fsp_header_ret:
+ /* EAX points to FSP_INFO_HEADER */
+ mov %eax, %ebp
+
+ /* sanity test */
+ cmp $CONFIG_FSP_LOCATION, %eax
+ jb die
+
+ /* calculate TempRamInitEntry address */
+ mov 0x30(%ebp), %eax
+ add 0x1c(%ebp), %eax
+
+ /* call FSP TempRamInitEntry to setup temporary stack */
+ lea temp_ram_init_romstack, %esp
+ jmp *%eax
+
+temp_ram_init_ret:
+ addl $4, %esp
+ cmp $0, %eax
+ jnz car_init_fail
+
+ post_code(POST_CAR_CPU_CACHE)
+
+ /*
+ * The FSP TempRamInit initializes the ecx and edx registers to
+ * point to a temporary but writable memory range (Cache-As-RAM).
+ * ecx: the start of this temporary memory range,
+ * edx: the end of this range.
+ */
+
+ /* stack grows down from top of CAR */
+ movl %edx, %esp
+
+ /*
+ * TODO:
+ *
+ * According to FSP architecture spec, the fsp_init() will not return
+ * to its caller, instead it requires the bootloader to provide a
+ * so-called continuation function to pass into the FSP as a parameter
+ * of fsp_init, and fsp_init() will call that continuation function
+ * directly.
+ *
+ * The call to fsp_init() may need to be moved out of the car_init()
+ * to cpu_init_f() with the help of some inline assembly codes.
+ * Note there is another issue that fsp_init() will setup another stack
+ * using the fsp_init parameter stack_top after DRAM is initialized,
+ * which means any data on the previous stack (on the CAR) gets lost
+ * (ie: U-Boot global_data). FSP is supposed to support such scenario,
+ * however it does not work. This should be revisited in the future.
+ */
+ movl $CONFIG_FSP_TEMP_RAM_ADDR, %eax
+ xorl %edx, %edx
+ xorl %ecx, %ecx
+ call fsp_init
+
+.global fsp_init_done
+fsp_init_done:
+ /*
+ * We come here from FspInit with eax pointing to the HOB list.
+ * Save eax to esi temporarily.
+ */
+ movl %eax, %esi
+ /*
+ * Re-initialize the ebp (BIST) to zero, as we already reach here
+ * which means we passed BIST testing before.
+ */
+ xorl %ebp, %ebp
+ jmp car_init_ret
+
+car_init_fail:
+ post_code(POST_CAR_FAILURE)
+
+die:
+ hlt
+ jmp die
+ hlt
+
+ /*
+ * The function call before CAR initialization is tricky. It cannot
+ * be called using the 'call' instruction but only the 'jmp' with
+ * the help of a handcrafted stack in the ROM. The stack needs to
+ * contain the function return address as well as the parameters.
+ */
+ .balign 4
+find_fsp_header_romstack:
+ .long find_fsp_header_ret
+
+ .balign 4
+temp_ram_init_romstack:
+ .long temp_ram_init_ret
+ .long temp_ram_init_params
+temp_ram_init_params:
+ .long ucode_start /* microcode base */
+ .long ucode_size /* microcode size */
+ .long CONFIG_SYS_MONITOR_BASE /* code region base */
+ .long CONFIG_SYS_MONITOR_LEN /* code region size */
+
+ .balign 4
+ucode_start:
+ .include "arch/x86/cpu/queensbay/M0220661105.inc"
+ucode_size = ( . - ucode_start)
diff --git a/arch/x86/cpu/queensbay/tnc_dram.c b/arch/x86/cpu/queensbay/tnc_dram.c
new file mode 100644
index 0000000..dbc1710
--- /dev/null
+++ b/arch/x86/cpu/queensbay/tnc_dram.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsp/fsp_support.h>
+#include <asm/e820.h>
+#include <asm/post.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ phys_size_t ram_size = 0;
+ union hob_pointers_t hob;
+
+ hob.raw = gd->arch.hob_list;
+ while (!END_OF_HOB(hob)) {
+ if (hob.hdr->type == HOB_TYPE_RES_DESC) {
+ if (hob.res_desc->type == RES_SYS_MEM ||
+ hob.res_desc->type == RES_MEM_RESERVED) {
+ ram_size += hob.res_desc->len;
+ }
+ }
+ hob.raw = GET_NEXT_HOB(hob);
+ }
+
+ gd->ram_size = ram_size;
+ post_code(POST_DRAM);
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = 0;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
+ * It overrides the default implementation found elsewhere which simply
+ * picks the end of ram, wherever that may be. The location of the stack,
+ * the relocation address, and how far U-Boot is moved by relocation are
+ * set in the global data structure.
+ */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+ return get_usable_lowmem_top(gd->arch.hob_list);
+}
+
+unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
+{
+ unsigned num_entries = 0;
+
+ union hob_pointers_t hob;
+
+ hob.raw = gd->arch.hob_list;
+
+ while (!END_OF_HOB(hob)) {
+ if (hob.hdr->type == HOB_TYPE_RES_DESC) {
+ entries[num_entries].addr = hob.res_desc->phys_start;
+ entries[num_entries].size = hob.res_desc->len;
+
+ if (hob.res_desc->type == RES_SYS_MEM)
+ entries[num_entries].type = E820_RAM;
+ else if (hob.res_desc->type == RES_MEM_RESERVED)
+ entries[num_entries].type = E820_RESERVED;
+ }
+ hob.raw = GET_NEXT_HOB(hob);
+ num_entries++;
+ }
+
+ return num_entries;
+}
diff --git a/arch/x86/cpu/queensbay/tnc_pci.c b/arch/x86/cpu/queensbay/tnc_pci.c
new file mode 100644
index 0000000..39bff49
--- /dev/null
+++ b/arch/x86/cpu/queensbay/tnc_pci.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+#include <asm/arch/fsp/fsp_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_pci_setup_hose(struct pci_controller *hose)
+{
+ hose->first_busno = 0;
+ hose->last_busno = 0;
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 0,
+ CONFIG_PCI_MEM_BUS,
+ CONFIG_PCI_MEM_PHYS,
+ CONFIG_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 1,
+ CONFIG_PCI_IO_BUS,
+ CONFIG_PCI_IO_PHYS,
+ CONFIG_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ pci_set_region(hose->regions + 2,
+ CONFIG_PCI_PREF_BUS,
+ CONFIG_PCI_PREF_PHYS,
+ CONFIG_PCI_PREF_SIZE,
+ PCI_REGION_PREFETCH);
+
+ pci_set_region(hose->regions + 3,
+ 0,
+ 0,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ hose->region_count = 4;
+}
+
+int board_pci_post_scan(struct pci_controller *hose)
+{
+ u32 status;
+
+ /* call into FspNotify */
+ debug("Calling into FSP (notify phase INIT_PHASE_PCI): ");
+ status = fsp_notify(NULL, INIT_PHASE_PCI);
+ if (status != FSP_SUCCESS)
+ debug("fail, error code %x\n", status);
+ else
+ debug("OK\n");
+
+ return 0;
+}