qspi: t210: Use dev_read calls to get FDT data like base, freq

This Tegra QSPI driver hadn't been brought up to date with how
DM drivers are fetching data from the FDT now, and was pulling
in bogus data for base, max freq, etc. Fixed ofdata_to_platdata
to work the same way it does in the tegra114 SPI driver, using
dev_read_ functions.

Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/drivers/spi/tegra210_qspi.c b/drivers/spi/tegra210_qspi.c
index d914337..6e540e9 100644
--- a/drivers/spi/tegra210_qspi.c
+++ b/drivers/spi/tegra210_qspi.c
@@ -2,7 +2,7 @@
 /*
  * NVIDIA Tegra210 QSPI controller driver
  *
- * (C) Copyright 2015-2019 NVIDIA Corporation <www.nvidia.com>
+ * (C) Copyright 2015-2020 NVIDIA Corporation <www.nvidia.com>
  *
  */
 
@@ -97,10 +97,8 @@
 static int tegra210_qspi_ofdata_to_platdata(struct udevice *bus)
 {
 	struct tegra_spi_platdata *plat = bus->platdata;
-	const void *blob = gd->fdt_blob;
-	int node = dev_of_offset(bus);
 
-	plat->base = devfdt_get_addr(bus);
+	plat->base = dev_read_addr(bus);
 	plat->periph_id = clock_decode_periph_id(bus);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {
@@ -110,10 +108,11 @@
 	}
 
 	/* Use 500KHz as a suitable default */
-	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
-					 500000);
-	plat->deactivate_delay_us = fdtdec_get_int(blob, node,
-						   "spi-deactivate-delay", 0);
+	plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
+					       500000);
+	plat->deactivate_delay_us = dev_read_u32_default(bus,
+							 "spi-deactivate-delay",
+							 0);
 	debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
 	      __func__, plat->base, plat->periph_id, plat->frequency,
 	      plat->deactivate_delay_us);