dm: i2c: tegra: Convert to driver model
This converts all Tegra boards over to use driver model for I2C. The driver
is adjusted to use driver model and the following obsolete CONFIGs are
removed:
- CONFIG_SYS_I2C_INIT_BOARD
- CONFIG_I2C_MULTI_BUS
- CONFIG_SYS_MAX_I2C_BUS
- CONFIG_SYS_I2C_SPEED
- CONFIG_SYS_I2C
This has been tested on:
- trimslice (no I2C)
- beaver
- Jetson-TK1
It has not been tested on Tegra 114 as I don't have that board.
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/cpu/tegra20-common/pmu.c b/arch/arm/cpu/tegra20-common/pmu.c
index c595f70..36a76a2 100644
--- a/arch/arm/cpu/tegra20-common/pmu.c
+++ b/arch/arm/cpu/tegra20-common/pmu.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <i2c.h>
#include <tps6586x.h>
#include <asm/io.h>
#include <asm/arch/tegra.h>
@@ -23,9 +24,13 @@
#define VDD_TRANSITION_STEP 0x06 /* 150mv */
#define VDD_TRANSITION_RATE 0x06 /* 3.52mv/us */
+#define PMI_I2C_ADDRESS 0x34 /* chip requires this address */
+
int pmu_set_nominal(void)
{
- int core, cpu, bus;
+ struct udevice *bus, *dev;
+ int core, cpu;
+ int ret;
/* by default, the table has been filled with T25 settings */
switch (tegra_get_chip_sku()) {
@@ -42,12 +47,18 @@
return -1;
}
- bus = tegra_i2c_get_dvc_bus_num();
- if (bus == -1) {
+ ret = tegra_i2c_get_dvc_bus(&bus);
+ if (ret) {
debug("%s: Cannot find DVC I2C bus\n", __func__);
- return -1;
+ return ret;
}
- tps6586x_init(bus);
+ ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find DVC I2C chip\n", __func__);
+ return ret;
+ }
+
+ tps6586x_init(dev);
tps6586x_set_pwm_mode(TPS6586X_PWM_SM1);
return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP,
VDD_TRANSITION_RATE, VDD_RELATION);
diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts b/arch/arm/dts/tegra124-jetson-tk1.dts
index ffad116..f6fe9a0 100644
--- a/arch/arm/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/dts/tegra124-jetson-tk1.dts
@@ -16,7 +16,6 @@
i2c2 = "/i2c@7000c400";
i2c3 = "/i2c@7000c500";
i2c4 = "/i2c@7000c700";
- i2c5 = "/i2c@7000d100";
sdhci0 = "/sdhci@700b0600";
sdhci1 = "/sdhci@700b0400";
spi0 = "/spi@7000d400";
diff --git a/arch/arm/dts/tegra30-tec-ng.dts b/arch/arm/dts/tegra30-tec-ng.dts
index 8a69e81..e924acc 100644
--- a/arch/arm/dts/tegra30-tec-ng.dts
+++ b/arch/arm/dts/tegra30-tec-ng.dts
@@ -6,6 +6,10 @@
model = "Avionic Design Tamonten™ NG Evaluation Carrier";
compatible = "ad,tec-ng", "nvidia,tegra30";
+ aliases {
+ i2c0 = "/i2c@7000c400";
+ };
+
/* GEN2 */
i2c@7000c400 {
status = "okay";
diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
index 7ca6907..eeeb247 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
@@ -167,6 +167,6 @@
*
* @return number of bus, or -1 if there is no DVC active
*/
-int tegra_i2c_get_dvc_bus_num(void);
+int tegra_i2c_get_dvc_bus(struct udevice **busp);
#endif /* _TEGRA_I2C_H_ */