drivers/power/pmic: Add tps65910 driver
Add a driver for the TPS65910 PMIC that is found in the AM335x GP EVM,
AM335x EVM SK and others.
Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
[trini: Split and rework Avinash's changes into new drivers/power
framework]
Signed-off-by: Tom Rini <trini@ti.com>
diff --git a/drivers/power/pmic/pmic_tps65910.c b/drivers/power/pmic/pmic_tps65910.c
new file mode 100644
index 0000000..7ee1160
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65910.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2011-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <power/tps65910.h>
+
+/*
+ * tps65910_set_i2c_control() - Set the TPS65910 to be controlled via the I2C
+ * interface.
+ * @return: 0 on success, not 0 on failure
+ */
+int tps65910_set_i2c_control(void)
+{
+ int ret;
+ uchar buf;
+
+ /* VDD1/2 voltage selection register access by control i/f */
+ ret = i2c_read(TPS65910_CTRL_I2C_ADDR, TPS65910_DEVCTRL_REG, 1,
+ &buf, 1);
+
+ if (ret)
+ return ret;
+
+ buf |= TPS65910_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C;
+
+ return i2c_write(TPS65910_CTRL_I2C_ADDR, TPS65910_DEVCTRL_REG, 1,
+ &buf, 1);
+}
+
+/*
+ * tps65910_voltage_update() - Voltage switching for MPU frequency switching.
+ * @module: mpu - 0, core - 1
+ * @vddx_op_vol_sel: vdd voltage to set
+ * @return: 0 on success, not 0 on failure
+ */
+int tps65910_voltage_update(unsigned int module, unsigned char vddx_op_vol_sel)
+{
+ uchar buf;
+ unsigned int reg_offset;
+ int ret;
+
+ if (module == MPU)
+ reg_offset = TPS65910_VDD1_OP_REG;
+ else
+ reg_offset = TPS65910_VDD2_OP_REG;
+
+ /* Select VDDx OP */
+ ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+ if (ret)
+ return ret;
+
+ buf &= ~TPS65910_OP_REG_CMD_MASK;
+
+ ret = i2c_write(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+ if (ret)
+ return ret;
+
+ /* Configure VDDx OP Voltage */
+ ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+ if (ret)
+ return ret;
+
+ buf &= ~TPS65910_OP_REG_SEL_MASK;
+ buf |= vddx_op_vol_sel;
+
+ ret = i2c_write(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+ if (ret)
+ return ret;
+
+ ret = i2c_read(TPS65910_CTRL_I2C_ADDR, reg_offset, 1, &buf, 1);
+ if (ret)
+ return ret;
+
+ if ((buf & TPS65910_OP_REG_SEL_MASK) != vddx_op_vol_sel)
+ return 1;
+
+ return 0;
+}