keystone: init: enable UART1 to be able use it from kernel
Currently PWREMU_MGMT is not configured in the Linux generic UART
driver as this register seems to be specific TI UART IP. So this
needs to be enabled in u-boot to use UART1 from kernel space.
Acked-By: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index 044015a..4df5ae1 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <ns16550.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
@@ -30,6 +31,14 @@
share_all_segments(11); /* PCIE */
#endif
+ /*
+ * just initialise the COM2 port so that TI specific
+ * UART register PWREMU_MGMT is initialized. Linux UART
+ * driver doesn't handle this.
+ */
+ NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM2),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
return 0;
}