arm: socfpga: Add SoCFPGA SR1500 board
The SR1500 board is a CycloneV based board, similar to the EBV
SoCrates, equipped with the following devices:
- SPI NOR
- eMMC
- Ethernet
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
diff --git a/arch/arm/dts/socfpga_cyclone5_sr1500.dts b/arch/arm/dts/socfpga_cyclone5_sr1500.dts
new file mode 100644
index 0000000..3729ca0
--- /dev/null
+++ b/arch/arm/dts/socfpga_cyclone5_sr1500.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "SoCFPGA Cyclone V SR1500";
+ compatible = "anonymous,socfpga-sr1500", "altr,socfpga-cyclone5", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ aliases {
+ /*
+ * This allows the ethaddr uboot environmnet variable
+ * contents to be added to the gmac1 device tree blob.
+ */
+ ethernet0 = &gmac1;
+ };
+
+ memory@0 {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ speed-mode = <0>;
+};
+
+&i2c1 {
+ status = "okay";
+ speed-mode = <0>;
+};
+
+&mmc0 {
+ status = "okay";
+ bus-width = <8>;
+ u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ flash0: n25q00@0 {
+ u-boot,dm-pre-reloc;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q00", "spi-flash";
+ reg = <0>; /* chip select */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ page-size = <256>;
+ block-size = <16>; /* 2^16, 64KB */
+ read-delay = <4>; /* delay value in read data capture register */
+ tshsl-ns = <50>;
+ tsd2d-ns = <50>;
+ tchsh-ns = <4>;
+ tslch-ns = <4>;
+ };
+};