powerpc/p3060qds: Add board related support for P3060QDS platform

The P3060QDS is a Freescale reference board for the six-core P3060 SOC.

P3060QDS Board Overview:
 Memory subsystem:
  - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
  - 128M Bytes NOR flash single-chip memory
  - 16M Bytes SPI flash
  - 8K Bytes AT24C64 I2C EEPROM for RCW
 Ethernet:
  - Eight Ethernet controllers (4x1G + 4x1G/2.5G)
  - Three VSC8641 PHYs on board (2xRGMII + 1xMII)
  - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3
 PCIe: Two PCI Express 2.0 controllers/ports
 USB:  Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board
 I2C:  Four I2C controllers
 UART: Supports two dUARTs up to 115200 bps for console
 RapidIO:  Two RapidIO, sRIO1 and sRIO2

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/board/freescale/p3060qds/p3060qds_qixis.h b/board/freescale/p3060qds/p3060qds_qixis.h
new file mode 100644
index 0000000..4d5d6a2
--- /dev/null
+++ b/board/freescale/p3060qds/p3060qds_qixis.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __P3060QDS_QIXIS_H__
+#define __P3060QDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for P3060QDS */
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EC_MODE_MASK		0x0F
+#define BRDCFG4_EC2_MII_EC1_MII	0x00
+#define BRDCFG4_EC2_MII_EC1_USB	0x03
+#define BRDCFG4_EC2_USB_EC1_MII	0x0C
+#define BRDCFG4_EC2_USB_EC1_USB	0x0F
+#define BRDCFG4_EC2_USB_EC1_RGMII	0x0E
+#define BRDCFG4_EC2_RGMII_EC1_USB	0x0B
+#define BRDCFG4_EC2_RGMII_EC1_RGMII	0x0A
+#define BRDCFG4_EMISEL_MASK		0xF0
+
+#define BRDCFG5_ECLKS_MASK		0x80
+#define BRDCFG5_USB1ID_MASK		0x40
+#define BRDCFG5_USB2ID_MASK		0x20
+#define BRDCFG5_GC2MX_MASK		0x0C
+#define BRDCFG5_T15MX_MASK		0x03
+#define BRDCFG5_ECLKS_IEEE1588_CM	0x80
+#define BRDCFG5_USB1ID_CTRL		0x40
+#define BRDCFG5_USB2ID_CTRL		0x20
+
+#define BRDCFG6_SD1MX_A		0x01
+#define BRDCFG6_SD1MX_B		0x00
+#define BRDCFG6_SD2MX_A		0x02
+#define BRDCFG6_SD2MX_B		0x00
+#define BRDCFG6_SD3MX_A		0x04
+#define BRDCFG6_SD3MX_B		0x00
+#define BRDCFG6_SD4MX_A		0x08
+#define BRDCFG6_SD4MX_B		0x00
+
+#define BRDCFG7_JTAGMX_MASK		0xC0
+#define BRDCFG7_IQ1MX_MASK		0x20
+#define BRDCFG7_G1MX_MASK		0x10
+#define BRDCFG7_D1MX_MASK		0x0C
+#define BRDCFG7_I3MX_MASK		0x03
+#define BRDCFG7_JTAGMX_AURORA		0x00
+#define BRDCFG7_JTAGMX_FPGA		0x80
+#define BRDCFG7_JTAGMX_COP_JTAG	0xC0
+#define BRDCFG7_IQ1MX_IRQ_EVT		0x00
+#define BRDCFG7_IQ1MX_USB2		0x20
+#define BRDCFG7_G1MX_USB1		0x00
+#define BRDCFG7_G1MX_TSEC3		0x10
+#define BRDCFG7_D1MX_DMA		0x00
+#define BRDCFG7_D1MX_TSEC3USB		0x04
+#define BRDCFG7_D1MX_HDLC2		0x08
+#define BRDCFG7_I3MX_UART2_I2C34	0x00
+#define BRDCFG7_I3MX_GPIO_EVT		0x01
+#define BRDCFG7_I3MX_USB1		0x02
+#define BRDCFG7_I3MX_TSEC3		0x03
+
+#endif