ARC: HSDK: Add platform-specific commands
This patch add support of hsdk platform-specific commands:
hsdk_clock set - set clock from axi_freq, cpu_freq and tun_freq
environment variables/command line arguments
hsdk_clock get - save clock frequencies to axi_freq, cpu_freq
and tun_freq environment variables
hsdk_clock print - show CPU, AXI, DDR and TUNNEL current
clock frequencies.
hsdk_clock print_all - show all currently used clock frequencies.
hsdk_init - setup board HW in one of pre-defined configuration
(hsdk_hs34 / hsdk_hs36 / hsdk_hs36_ccm / hsdk_hs38 /
hsdk_hs38_ccm / hsdk_hs38x2 / hsdk_hs38x3 / hsdk_hs38x4)
hsdk_go - run baremetal application on hsdk configured
by hsdk_init command.
This patch changes default behaviour of 'bootm' command:
now we are able to set number of CPUs to be kicked by setting
'core_mask' environment variable before 'bootm' command run.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
diff --git a/arch/arc/dts/hsdk.dts b/arch/arc/dts/hsdk.dts
index 67dfb93..09f3fe9 100644
--- a/arch/arc/dts/hsdk.dts
+++ b/arch/arc/dts/hsdk.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "skeleton.dtsi"
+#include "dt-bindings/clock/snps,hsdk-cgu.h"
/ {
#address-cells = <1>;
@@ -24,6 +25,35 @@
};
};
+ clk-fmeas {
+ clocks = <&cgu_clk CLK_ARC_PLL>, <&cgu_clk CLK_SYS_PLL>,
+ <&cgu_clk CLK_TUN_PLL>, <&cgu_clk CLK_DDR_PLL>,
+ <&cgu_clk CLK_ARC>, <&cgu_clk CLK_HDMI_PLL>,
+ <&cgu_clk CLK_TUN_TUN>, <&cgu_clk CLK_HDMI>,
+ <&cgu_clk CLK_SYS_APB>, <&cgu_clk CLK_SYS_AXI>,
+ <&cgu_clk CLK_SYS_ETH>, <&cgu_clk CLK_SYS_USB>,
+ <&cgu_clk CLK_SYS_SDIO>, <&cgu_clk CLK_SYS_HDMI>,
+ <&cgu_clk CLK_SYS_GFX_CORE>, <&cgu_clk CLK_SYS_GFX_DMA>,
+ <&cgu_clk CLK_SYS_GFX_CFG>, <&cgu_clk CLK_SYS_DMAC_CORE>,
+ <&cgu_clk CLK_SYS_DMAC_CFG>, <&cgu_clk CLK_SYS_SDIO_REF>,
+ <&cgu_clk CLK_SYS_SPI_REF>, <&cgu_clk CLK_SYS_I2C_REF>,
+ <&cgu_clk CLK_SYS_UART_REF>, <&cgu_clk CLK_SYS_EBI_REF>,
+ <&cgu_clk CLK_TUN_ROM>, <&cgu_clk CLK_TUN_PWM>;
+ clock-names = "cpu-pll", "sys-pll",
+ "tun-pll", "ddr-clk",
+ "cpu-clk", "hdmi-pll",
+ "tun-clk", "hdmi-clk",
+ "apb-clk", "axi-clk",
+ "eth-clk", "usb-clk",
+ "sdio-clk", "hdmi-sys-clk",
+ "gfx-core-clk", "gfx-dma-clk",
+ "gfx-cfg-clk", "dmac-core-clk",
+ "dmac-cfg-clk", "sdio-ref-clk",
+ "spi-clk", "i2c-clk",
+ "uart-clk", "ebi-clk",
+ "rom-clk", "pwm-clk";
+ };
+
cgu_clk: cgu-clk@f0000000 {
compatible = "snps,hsdk-cgu-clock";
reg = <0xf0000000 0x10>, <0xf00014B8 0x4>;