board/p1010rdb: add pin mux and sdhc support in any boot
Since pins multiplexing, SDHC shares signals with IFC, with this patch:
To enable SDHC in case of NOR/NAND/SPI boot
a) For temporary use case in runtime without reboot system
run 'mux sdhc' in u-boot to validate SDHC with invalidating IFC.
b) For long-term use case
set 'esdhc' in hwconfig and save it.
To enable IFC in case of SD boot
a) For temporary use case in runtime without reboot system
run 'mux ifc' in u-boot to validate IFC with invalidating SDHC.
b) For long-term use case
set 'ifc' in hwconfig and save it.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
diff --git a/board/freescale/p1010rdb/law.c b/board/freescale/p1010rdb/law.c
index 0045127..ed41a05 100644
--- a/board/freescale/p1010rdb/law.c
+++ b/board/freescale/p1010rdb/law.c
@@ -9,11 +9,9 @@
#include <asm/mmu.h>
struct law_entry law_table[] = {
-#ifndef CONFIG_SDCARD
SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_IFC),
SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
-#endif
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index 42153e6..ae8ba45 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -21,10 +21,8 @@
#include <asm/fsl_serdes.h>
#include <asm/fsl_ifc.h>
#include <asm/fsl_pci.h>
-
-#ifndef CONFIG_SDCARD
#include <hwconfig.h>
-#endif
+#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -33,8 +31,17 @@
#define MUX_CPLD_TDM 0x01
#define MUX_CPLD_SPICS0_FLASH 0x00
#define MUX_CPLD_SPICS0_SLIC 0x02
+#define PMUXCR1_IFC_MASK 0x00ffff00
+#define PMUXCR1_SDHC_MASK 0x00fff000
+#define PMUXCR1_SDHC_ENABLE 0x00555000
-#ifndef CONFIG_SDCARD
+enum {
+ MUX_TYPE_IFC,
+ MUX_TYPE_SDHC,
+};
+
+static uint sd_ifc_mux;
+
struct cpld_data {
u8 cpld_ver; /* cpld revision */
u8 pcba_ver; /* pcb revision number */
@@ -52,17 +59,14 @@
u8 por2; /* POR Options */
u8 por3; /* POR Options */
};
-#endif
int board_early_init_f(void)
{
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-#ifndef CONFIG_SDCARD
struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
/* Clock configuration to access CPLD using IFC(GPCM) */
setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
-#endif
/*
* Reset PCIe slots via GPIO4
*/
@@ -74,7 +78,6 @@
int board_early_init_r(void)
{
-#ifndef CONFIG_SDCARD
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
@@ -98,7 +101,6 @@
CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
-#endif
return 0;
}
@@ -109,6 +111,38 @@
}
#endif /* ifdef CONFIG_PCI */
+int config_board_mux(int ctrl_type)
+{
+ ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u8 tmp;
+
+ switch (ctrl_type) {
+ case MUX_TYPE_IFC:
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ tmp = 0xf0;
+ i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
+ tmp = 0x01;
+ i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
+ sd_ifc_mux = MUX_TYPE_IFC;
+ clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+ break;
+ case MUX_TYPE_SDHC:
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ tmp = 0xf0;
+ i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
+ tmp = 0x05;
+ i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
+ sd_ifc_mux = MUX_TYPE_SDHC;
+ clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+ PMUXCR1_SDHC_ENABLE);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
int checkboard(void)
{
struct cpu_type *cpu;
@@ -116,6 +150,11 @@
cpu = gd->arch.cpu;
printf("Board: %sRDB\n", cpu->name);
+#ifdef CONFIG_SDCARD
+ /* switch to IFC to read info from CPLD */
+ config_board_mux(MUX_TYPE_IFC);
+#endif
+
return 0;
}
@@ -211,6 +250,16 @@
}
}
+void fdt_del_ifc(void *blob)
+{
+ int nodeoff = 0;
+
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "fsl,ifc")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+}
+
void fdt_disable_uart1(void *blob)
{
int nodeoff;
@@ -254,9 +303,13 @@
fdt_del_flexcan(blob);
fdt_del_node_and_alias(blob, "ethernet2");
}
-#ifndef CONFIG_SDCARD
- /* disable sdhc due to sdhc bug */
- fdt_del_sdhc(blob);
+
+ /* Delete IFC node as IFC pins are multiplexing with SDHC */
+ if (sd_ifc_mux != MUX_TYPE_IFC)
+ fdt_del_ifc(blob);
+ else
+ fdt_del_sdhc(blob);
+
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
fdt_del_tdm(blob);
fdt_del_spi_slic(blob);
@@ -274,11 +327,25 @@
fdt_del_flexcan(blob);
fdt_disable_uart1(blob);
}
-#endif
}
#endif
-#ifndef CONFIG_SDCARD
+#ifdef CONFIG_SDCARD
+int board_mmc_init(bd_t *bis)
+{
+ config_board_mux(MUX_TYPE_SDHC);
+ return -1;
+}
+#else
+void board_reset(void)
+{
+ /* mux to IFC to enable CPLD for reset */
+ if (sd_ifc_mux != MUX_TYPE_IFC)
+ config_board_mux(MUX_TYPE_IFC);
+}
+#endif
+
+
int misc_init_r(void)
{
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -304,6 +371,30 @@
out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
}
+ if (hwconfig("esdhc"))
+ config_board_mux(MUX_TYPE_SDHC);
+ else if (hwconfig("ifc"))
+ config_board_mux(MUX_TYPE_IFC);
+
return 0;
}
-#endif
+
+static int pin_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ if (strcmp(argv[1], "ifc") == 0)
+ config_board_mux(MUX_TYPE_IFC);
+ else if (strcmp(argv[1], "sdhc") == 0)
+ config_board_mux(MUX_TYPE_SDHC);
+ else
+ return CMD_RET_USAGE;
+ return 0;
+}
+
+U_BOOT_CMD(
+ mux, 2, 0, pin_mux_cmd,
+ "configure multiplexing pin for IFC/SDHC bus in runtime",
+ "bus_type (e.g. mux sdhc)"
+);
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
index 77a8043..a7af0f6 100644
--- a/board/freescale/p1010rdb/tlb.c
+++ b/board/freescale/p1010rdb/tlb.c
@@ -42,7 +42,6 @@
0, 1, BOOKE_PAGESZ_1M, 1),
#ifndef CONFIG_SPL_BUILD
-#ifndef CONFIG_SDCARD
SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
0, 2, BOOKE_PAGESZ_16M, 1),
@@ -51,7 +50,6 @@
CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
0, 3, BOOKE_PAGESZ_16M, 1),
-#endif
#ifdef CONFIG_PCI
/* *I*G* - PCI */
@@ -66,7 +64,6 @@
#endif
#endif
-#ifndef CONFIG_SDCARD
/* *I*G - Board CPLD */
SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
@@ -75,7 +72,6 @@
SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 7, BOOKE_PAGESZ_1M, 1),
-#endif
#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,