mpc8xx: remove lwmon board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c
index 9967664..105be9c 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu.c
@@ -457,8 +457,6 @@
 
 /* ------------------------------------------------------------------------- */
 
-#ifndef CONFIG_LWMON
-
 int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong msr, addr;
@@ -493,32 +491,6 @@
 	return 1;
 }
 
-#else	/* CONFIG_LWMON */
-
-/*
- * On the LWMON board, the MCLR reset input of the PIC's on the board
- * uses a 47K/1n RC combination which has a 47us time  constant.  The
- * low  signal on the HRESET pin of the CPU is only 512 clocks = 8 us
- * and thus too short to reset the external hardware. So we  use  the
- * watchdog to reset the board.
- */
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	/* prevent triggering the watchdog */
-	disable_interrupts ();
-
-	/* make sure the watchdog is running */
-	reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
-
-	/* wait for watchdog reset */
-	while (1) {};
-
-	/* NOTREACHED */
-	return 1;
-}
-
-#endif	/* CONFIG_LWMON */
-
 /* ------------------------------------------------------------------------- */
 
 /*
@@ -580,31 +552,15 @@
 }
 #endif /* CONFIG_WATCHDOG */
 
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON)
+#if defined(CONFIG_WATCHDOG)
 
 void reset_8xx_watchdog (volatile immap_t * immr)
 {
-# if defined(CONFIG_LWMON)
-	/*
-	 * The LWMON board uses a MAX6301 Watchdog
-	 * with the trigger pin connected to port PA.7
-	 *
-	 * (The old board version used a MAX706TESA Watchdog, which
-	 * had to be handled exactly the same.)
-	 */
-# define WATCHDOG_BIT	0x0100
-	immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT);	/* GPIO     */
-	immr->im_ioport.iop_padir |= WATCHDOG_BIT;	/* Output   */
-	immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT);	/* active output */
-
-	immr->im_ioport.iop_padat ^= WATCHDOG_BIT;	/* Toggle WDI   */
-# else
 	/*
 	 * All other boards use the MPC8xx Internal Watchdog
 	 */
 	immr->im_siu_conf.sc_swsr = 0x556c;	/* write magic1 */
 	immr->im_siu_conf.sc_swsr = 0xaa39;	/* write magic2 */
-# endif /* CONFIG_LWMON */
 }
 #endif /* CONFIG_WATCHDOG */