pci: Require DM_PCI
As the migration deadline has passed, require that DM_PCI be used.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index c49cb6e..2ef4d46 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -1,22 +1,23 @@
menuconfig PCI
bool "PCI support"
+ depends on DM
default y if PPC
+ select DM_PCI
help
Enable support for PCI (Peripheral Interconnect Bus), a type of bus
used on some devices to allow the CPU to communicate with its
peripherals.
-if PCI
-
config DM_PCI
- bool "Enable driver model for PCI"
- depends on DM
+ bool
help
Use driver model for PCI. Driver model is the new method for
orgnising devices in U-Boot. For PCI, driver model keeps track of
available PCI devices, allows scanning of PCI buses and provides
device configuration support.
+if PCI
+
config DM_PCI_COMPAT
bool "Enable compatible functions for PCI"
depends on DM_PCI
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ec8ee9d..83d7a4e 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -3,16 +3,12 @@
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifneq ($(CONFIG_DM_PCI),)
obj-$(CONFIG_DM_VIDEO) += pci_rom.o
obj-$(CONFIG_PCI) += pci-uclass.o pci_auto.o
obj-$(CONFIG_DM_PCI_COMPAT) += pci_compat.o
obj-$(CONFIG_PCI_SANDBOX) += pci_sandbox.o
obj-$(CONFIG_SANDBOX) += pci-emul-uclass.o
obj-$(CONFIG_X86) += pci_x86.o pci_rom.o
-else
-obj-$(CONFIG_PCI) += pci.o pci_auto_old.o
-endif
obj-$(CONFIG_PCI) += pci_auto_common.o pci_common.o
obj-$(CONFIG_PCIE_ECAM_GENERIC) += pcie_ecam_generic.o
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
deleted file mode 100644
index d8f9239..0000000
--- a/drivers/pci/pci.c
+++ /dev/null
@@ -1,588 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- *
- * (C) Copyright 2002, 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-/*
- * Old PCI routines
- *
- * Do not change this file. Instead, convert your board to use CONFIG_DM_PCI
- * and change pci-uclass.c.
- */
-
-#include <common.h>
-#include <init.h>
-#include <log.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-#include <command.h>
-#include <env.h>
-#include <errno.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PCI_HOSE_OP(rw, size, type) \
-int pci_hose_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, \
- int offset, type value) \
-{ \
- return hose->rw##_##size(hose, dev, offset, value); \
-}
-
-PCI_HOSE_OP(read, byte, u8 *)
-PCI_HOSE_OP(read, word, u16 *)
-PCI_HOSE_OP(read, dword, u32 *)
-PCI_HOSE_OP(write, byte, u8)
-PCI_HOSE_OP(write, word, u16)
-PCI_HOSE_OP(write, dword, u32)
-
-#define PCI_OP(rw, size, type, error_code) \
-int pci_##rw##_config_##size(pci_dev_t dev, int offset, type value) \
-{ \
- struct pci_controller *hose = pci_bus_to_hose(PCI_BUS(dev)); \
- \
- if (!hose) \
- { \
- error_code; \
- return -1; \
- } \
- \
- return pci_hose_##rw##_config_##size(hose, dev, offset, value); \
-}
-
-PCI_OP(read, byte, u8 *, *value = 0xff)
-PCI_OP(read, word, u16 *, *value = 0xffff)
-PCI_OP(read, dword, u32 *, *value = 0xffffffff)
-PCI_OP(write, byte, u8, )
-PCI_OP(write, word, u16, )
-PCI_OP(write, dword, u32, )
-
-#define PCI_READ_VIA_DWORD_OP(size, type, off_mask) \
-int pci_hose_read_config_##size##_via_dword(struct pci_controller *hose,\
- pci_dev_t dev, \
- int offset, type val) \
-{ \
- u32 val32; \
- \
- if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0) { \
- *val = -1; \
- return -1; \
- } \
- \
- *val = (val32 >> ((offset & (int)off_mask) * 8)); \
- \
- return 0; \
-}
-
-#define PCI_WRITE_VIA_DWORD_OP(size, type, off_mask, val_mask) \
-int pci_hose_write_config_##size##_via_dword(struct pci_controller *hose,\
- pci_dev_t dev, \
- int offset, type val) \
-{ \
- u32 val32, mask, ldata, shift; \
- \
- if (pci_hose_read_config_dword(hose, dev, offset & 0xfc, &val32) < 0)\
- return -1; \
- \
- shift = ((offset & (int)off_mask) * 8); \
- ldata = (((unsigned long)val) & val_mask) << shift; \
- mask = val_mask << shift; \
- val32 = (val32 & ~mask) | ldata; \
- \
- if (pci_hose_write_config_dword(hose, dev, offset & 0xfc, val32) < 0)\
- return -1; \
- \
- return 0; \
-}
-
-PCI_READ_VIA_DWORD_OP(byte, u8 *, 0x03)
-PCI_READ_VIA_DWORD_OP(word, u16 *, 0x02)
-PCI_WRITE_VIA_DWORD_OP(byte, u8, 0x03, 0x000000ff)
-PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)
-
-/*
- *
- */
-
-static struct pci_controller* hose_head;
-
-struct pci_controller *pci_get_hose_head(void)
-{
- if (gd->hose)
- return gd->hose;
-
- return hose_head;
-}
-
-void pci_register_hose(struct pci_controller* hose)
-{
- struct pci_controller **phose = &hose_head;
-
- while(*phose)
- phose = &(*phose)->next;
-
- hose->next = NULL;
-
- *phose = hose;
-}
-
-struct pci_controller *pci_bus_to_hose(int bus)
-{
- struct pci_controller *hose;
-
- for (hose = pci_get_hose_head(); hose; hose = hose->next) {
- if (bus >= hose->first_busno && bus <= hose->last_busno)
- return hose;
- }
-
- printf("pci_bus_to_hose() failed\n");
- return NULL;
-}
-
-struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr)
-{
- struct pci_controller *hose;
-
- for (hose = pci_get_hose_head(); hose; hose = hose->next) {
- if (hose->cfg_addr == cfg_addr)
- return hose;
- }
-
- return NULL;
-}
-
-int pci_last_busno(void)
-{
- struct pci_controller *hose = pci_get_hose_head();
-
- if (!hose)
- return -1;
-
- while (hose->next)
- hose = hose->next;
-
- return hose->last_busno;
-}
-
-pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
-{
- struct pci_controller * hose;
- pci_dev_t bdf;
- int bus;
-
- for (hose = pci_get_hose_head(); hose; hose = hose->next) {
- for (bus = hose->first_busno; bus <= hose->last_busno; bus++) {
- bdf = pci_hose_find_devices(hose, bus, ids, &index);
- if (bdf != -1)
- return bdf;
- }
- }
-
- return -1;
-}
-
-static int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev,
- ulong io, pci_addr_t mem, ulong command)
-{
- u32 bar_response;
- unsigned int old_command;
- pci_addr_t bar_value;
- pci_size_t bar_size;
- unsigned char pin;
- int bar, found_mem64;
-
- debug("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", io,
- (u64)mem, command);
-
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND, 0);
-
- for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) {
- pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
- pci_hose_read_config_dword(hose, dev, bar, &bar_response);
-
- if (!bar_response)
- continue;
-
- found_mem64 = 0;
-
- /* Check the BAR type and set our address mask */
- if (bar_response & PCI_BASE_ADDRESS_SPACE) {
- bar_size = ~(bar_response & PCI_BASE_ADDRESS_IO_MASK) + 1;
- /* round up region base address to a multiple of size */
- io = ((io - 1) | (bar_size - 1)) + 1;
- bar_value = io;
- /* compute new region base address */
- io = io + bar_size;
- } else {
- if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
- PCI_BASE_ADDRESS_MEM_TYPE_64) {
- u32 bar_response_upper;
- u64 bar64;
- pci_hose_write_config_dword(hose, dev, bar + 4,
- 0xffffffff);
- pci_hose_read_config_dword(hose, dev, bar + 4,
- &bar_response_upper);
-
- bar64 = ((u64)bar_response_upper << 32) | bar_response;
-
- bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
- found_mem64 = 1;
- } else {
- bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
- }
-
- /* round up region base address to multiple of size */
- mem = ((mem - 1) | (bar_size - 1)) + 1;
- bar_value = mem;
- /* compute new region base address */
- mem = mem + bar_size;
- }
-
- /* Write it out and update our limit */
- pci_hose_write_config_dword (hose, dev, bar, (u32)bar_value);
-
- if (found_mem64) {
- bar += 4;
-#ifdef CONFIG_SYS_PCI_64BIT
- pci_hose_write_config_dword(hose, dev, bar,
- (u32)(bar_value >> 32));
-#else
- pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
-#endif
- }
- }
-
- /* Configure Cache Line Size Register */
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
- /* Configure Latency Timer */
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-
- /* Disable interrupt line, if device says it wants to use interrupts */
- pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin);
- if (pin != 0) {
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE,
- PCI_INTERRUPT_LINE_DISABLE);
- }
-
- pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &old_command);
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND,
- (old_command & 0xffff0000) | command);
-
- return 0;
-}
-
-/*
- *
- */
-
-struct pci_config_table *pci_find_config(struct pci_controller *hose,
- unsigned short class,
- unsigned int vendor,
- unsigned int device,
- unsigned int bus,
- unsigned int dev,
- unsigned int func)
-{
- struct pci_config_table *table;
-
- for (table = hose->config_table; table && table->vendor; table++) {
- if ((table->vendor == PCI_ANY_ID || table->vendor == vendor) &&
- (table->device == PCI_ANY_ID || table->device == device) &&
- (table->class == PCI_ANY_ID || table->class == class) &&
- (table->bus == PCI_ANY_ID || table->bus == bus) &&
- (table->dev == PCI_ANY_ID || table->dev == dev) &&
- (table->func == PCI_ANY_ID || table->func == func)) {
- return table;
- }
- }
-
- return NULL;
-}
-
-void pci_cfgfunc_config_device(struct pci_controller *hose,
- pci_dev_t dev,
- struct pci_config_table *entry)
-{
- pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1],
- entry->priv[2]);
-}
-
-void pci_cfgfunc_do_nothing(struct pci_controller *hose,
- pci_dev_t dev, struct pci_config_table *entry)
-{
-}
-
-/*
- * HJF: Changed this to return int. I think this is required
- * to get the correct result when scanning bridges
- */
-extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
-__weak int pci_print_dev(struct pci_controller *hose, pci_dev_t dev)
-{
- if (dev == PCI_BDF(hose->first_busno, 0, 0))
- return 0;
-
- return 1;
-}
-#endif /* CONFIG_PCI_SCAN_SHOW */
-
-int pci_hose_scan_bus(struct pci_controller *hose, int bus)
-{
- unsigned int sub_bus, found_multi = 0;
- unsigned short vendor, device, class;
- unsigned char header_type;
-#ifndef CONFIG_PCI_PNP
- struct pci_config_table *cfg;
-#endif
- pci_dev_t dev;
-#ifdef CONFIG_PCI_SCAN_SHOW
- static int indent = 0;
-#endif
-
- sub_bus = bus;
-
- for (dev = PCI_BDF(bus,0,0);
- dev < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
- PCI_MAX_PCI_FUNCTIONS - 1);
- dev += PCI_BDF(0, 0, 1)) {
-
- if (pci_skip_dev(hose, dev))
- continue;
-
- if (PCI_FUNC(dev) && !found_multi)
- continue;
-
- pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
-
- pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);
-
- if (vendor == 0xffff || vendor == 0x0000)
- continue;
-
- if (!PCI_FUNC(dev))
- found_multi = header_type & 0x80;
-
- debug("PCI Scan: Found Bus %d, Device %d, Function %d\n",
- PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
-
- pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);
- pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
-
-#ifdef CONFIG_PCI_FIXUP_DEV
- board_pci_fixup_dev(hose, dev, vendor, device, class);
-#endif
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- indent++;
-
- /* Print leading space, including bus indentation */
- printf("%*c", indent + 1, ' ');
-
- if (pci_print_dev(hose, dev)) {
- printf("%02x:%02x.%-*x - %04x:%04x - %s\n",
- PCI_BUS(dev), PCI_DEV(dev), 6 - indent, PCI_FUNC(dev),
- vendor, device, pci_class_str(class >> 8));
- }
-#endif
-
-#ifdef CONFIG_PCI_PNP
- sub_bus = max((unsigned int)pciauto_config_device(hose, dev),
- sub_bus);
-#else
- cfg = pci_find_config(hose, class, vendor, device,
- PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
- if (cfg) {
- cfg->config_device(hose, dev, cfg);
- sub_bus = max(sub_bus,
- (unsigned int)hose->current_busno);
- }
-#endif
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- indent--;
-#endif
-
- if (hose->fixup_irq)
- hose->fixup_irq(hose, dev);
- }
-
- return sub_bus;
-}
-
-int pci_hose_scan(struct pci_controller *hose)
-{
-#if defined(CONFIG_PCI_BOOTDELAY)
- char *s;
- int i;
-
- if (!gd->pcidelay_done) {
- /* wait "pcidelay" ms (if defined)... */
- s = env_get("pcidelay");
- if (s) {
- int val = simple_strtoul(s, NULL, 10);
- for (i = 0; i < val; i++)
- udelay(1000);
- }
- gd->pcidelay_done = 1;
- }
-#endif /* CONFIG_PCI_BOOTDELAY */
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- puts("PCI:\n");
-#endif
-
- /*
- * Start scan at current_busno.
- * PCIe will start scan at first_busno+1.
- */
- /* For legacy support, ensure current >= first */
- if (hose->first_busno > hose->current_busno)
- hose->current_busno = hose->first_busno;
-#ifdef CONFIG_PCI_PNP
- pciauto_config_init(hose);
-#endif
- return pci_hose_scan_bus(hose, hose->current_busno);
-}
-
-int pci_init(void)
-{
- hose_head = NULL;
-
- /* allow env to disable pci init/enum */
- if (env_get("pcidisable") != NULL)
- return 0;
-
- /* now call board specific pci_init()... */
- pci_init_board();
-
- return 0;
-}
-
-/* Returns the address of the requested capability structure within the
- * device's PCI configuration space or 0 in case the device does not
- * support it.
- * */
-int pci_hose_find_capability(struct pci_controller *hose, pci_dev_t dev,
- int cap)
-{
- int pos;
- u8 hdr_type;
-
- pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &hdr_type);
-
- pos = pci_hose_find_cap_start(hose, dev, hdr_type & 0x7F);
-
- if (pos)
- pos = pci_find_cap(hose, dev, pos, cap);
-
- return pos;
-}
-
-/* Find the header pointer to the Capabilities*/
-int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev,
- u8 hdr_type)
-{
- u16 status;
-
- pci_hose_read_config_word(hose, dev, PCI_STATUS, &status);
-
- if (!(status & PCI_STATUS_CAP_LIST))
- return 0;
-
- switch (hdr_type) {
- case PCI_HEADER_TYPE_NORMAL:
- case PCI_HEADER_TYPE_BRIDGE:
- return PCI_CAPABILITY_LIST;
- case PCI_HEADER_TYPE_CARDBUS:
- return PCI_CB_CAPABILITY_LIST;
- default:
- return 0;
- }
-}
-
-int pci_find_cap(struct pci_controller *hose, pci_dev_t dev, int pos, int cap)
-{
- int ttl = PCI_FIND_CAP_TTL;
- u8 id;
- u8 next_pos;
-
- while (ttl--) {
- pci_hose_read_config_byte(hose, dev, pos, &next_pos);
- if (next_pos < CAP_START_POS)
- break;
- next_pos &= ~3;
- pos = (int) next_pos;
- pci_hose_read_config_byte(hose, dev,
- pos + PCI_CAP_LIST_ID, &id);
- if (id == 0xff)
- break;
- if (id == cap)
- return pos;
- pos += PCI_CAP_LIST_NEXT;
- }
- return 0;
-}
-
-/**
- * pci_find_next_ext_capability - Find an extended capability
- *
- * Returns the address of the next matching extended capability structure
- * within the device's PCI configuration space or 0 if the device does
- * not support it. Some capabilities can occur several times, e.g., the
- * vendor-specific capability, and this provides a way to find them all.
- */
-int pci_find_next_ext_capability(struct pci_controller *hose, pci_dev_t dev,
- int start, int cap)
-{
- u32 header;
- int ttl, pos = PCI_CFG_SPACE_SIZE;
-
- /* minimum 8 bytes per capability */
- ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
-
- if (start)
- pos = start;
-
- pci_hose_read_config_dword(hose, dev, pos, &header);
- if (header == 0xffffffff || header == 0)
- return 0;
-
- while (ttl-- > 0) {
- if (PCI_EXT_CAP_ID(header) == cap && pos != start)
- return pos;
-
- pos = PCI_EXT_CAP_NEXT(header);
- if (pos < PCI_CFG_SPACE_SIZE)
- break;
-
- pci_hose_read_config_dword(hose, dev, pos, &header);
- if (header == 0xffffffff || header == 0)
- break;
- }
-
- return 0;
-}
-
-/**
- * pci_hose_find_ext_capability - Find an extended capability
- *
- * Returns the address of the requested extended capability structure
- * within the device's PCI configuration space or 0 if the device does
- * not support it.
- */
-int pci_hose_find_ext_capability(struct pci_controller *hose, pci_dev_t dev,
- int cap)
-{
- return pci_find_next_ext_capability(hose, dev, 0, cap);
-}
diff --git a/drivers/pci/pci_auto_old.c b/drivers/pci/pci_auto_old.c
deleted file mode 100644
index c56ff53..0000000
--- a/drivers/pci/pci_auto_old.c
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * PCI autoconfiguration library (legacy version, do not change)
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * Copyright 2000 MontaVista Software Inc.
- */
-
-#include <common.h>
-#include <errno.h>
-#include <log.h>
-#include <pci.h>
-
-/*
- * Do not change this file. Instead, convert your board to use CONFIG_DM_PCI
- * and change pci_auto.c.
- */
-
-/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
-#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
-#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
-#endif
-
-/*
- *
- */
-
-void pciauto_setup_device(struct pci_controller *hose,
- pci_dev_t dev, int bars_num,
- struct pci_region *mem,
- struct pci_region *prefetch,
- struct pci_region *io)
-{
- u32 bar_response;
- pci_size_t bar_size;
- u16 cmdstat = 0;
- int bar, bar_nr = 0;
- u8 header_type;
- int rom_addr;
- pci_addr_t bar_value;
- struct pci_region *bar_res;
- int found_mem64 = 0;
- u16 class;
-
- pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
- cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
-
- for (bar = PCI_BASE_ADDRESS_0;
- bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
- /* Tickle the BAR and get the response */
- pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
- pci_hose_read_config_dword(hose, dev, bar, &bar_response);
-
- /* If BAR is not implemented go to the next BAR */
- if (!bar_response)
- continue;
-
- found_mem64 = 0;
-
- /* Check the BAR type and set our address mask */
- if (bar_response & PCI_BASE_ADDRESS_SPACE) {
- bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
- & 0xffff) + 1;
- bar_res = io;
-
- debug("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ",
- bar_nr, (unsigned long long)bar_size);
- } else {
- if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
- PCI_BASE_ADDRESS_MEM_TYPE_64) {
- u32 bar_response_upper;
- u64 bar64;
-
- pci_hose_write_config_dword(hose, dev, bar + 4,
- 0xffffffff);
- pci_hose_read_config_dword(hose, dev, bar + 4,
- &bar_response_upper);
-
- bar64 = ((u64)bar_response_upper << 32) | bar_response;
-
- bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
- found_mem64 = 1;
- } else {
- bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
- }
- if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
- bar_res = prefetch;
- else
- bar_res = mem;
-
- debug("PCI Autoconfig: BAR %d, %s, size=0x%llx, ",
- bar_nr, bar_res == prefetch ? "Prf" : "Mem",
- (unsigned long long)bar_size);
- }
-
- if (pciauto_region_allocate(bar_res, bar_size,
- &bar_value, found_mem64) == 0) {
- /* Write it out and update our limit */
- pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
-
- if (found_mem64) {
- bar += 4;
-#ifdef CONFIG_SYS_PCI_64BIT
- pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
-#else
- /*
- * If we are a 64-bit decoder then increment to the
- * upper 32 bits of the bar and force it to locate
- * in the lower 4GB of memory.
- */
- pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
-#endif
- }
-
- }
- cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
- PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
-
- debug("\n");
-
- bar_nr++;
- }
-
- /* Configure the expansion ROM address */
- pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, &header_type);
- header_type &= 0x7f;
- if (header_type != PCI_HEADER_TYPE_CARDBUS) {
- rom_addr = (header_type == PCI_HEADER_TYPE_NORMAL) ?
- PCI_ROM_ADDRESS : PCI_ROM_ADDRESS1;
- pci_hose_write_config_dword(hose, dev, rom_addr, 0xfffffffe);
- pci_hose_read_config_dword(hose, dev, rom_addr, &bar_response);
- if (bar_response) {
- bar_size = -(bar_response & ~1);
- debug("PCI Autoconfig: ROM, size=%#x, ",
- (unsigned int)bar_size);
- if (pciauto_region_allocate(mem, bar_size,
- &bar_value, false) == 0) {
- pci_hose_write_config_dword(hose, dev, rom_addr,
- bar_value);
- }
- cmdstat |= PCI_COMMAND_MEMORY;
- debug("\n");
- }
- }
-
- /* PCI_COMMAND_IO must be set for VGA device */
- pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
- if (class == PCI_CLASS_DISPLAY_VGA)
- cmdstat |= PCI_COMMAND_IO;
-
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
- CONFIG_SYS_PCI_CACHE_LINE_SIZE);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-}
-
-void pciauto_prescan_setup_bridge(struct pci_controller *hose,
- pci_dev_t dev, int sub_bus)
-{
- struct pci_region *pci_mem;
- struct pci_region *pci_prefetch;
- struct pci_region *pci_io;
- u16 cmdstat, prefechable_64;
-
- pci_mem = hose->pci_mem;
- pci_prefetch = hose->pci_prefetch;
- pci_io = hose->pci_io;
-
- pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
- pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
- &prefechable_64);
- prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
-
- /* Configure bus number registers */
- pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
- PCI_BUS(dev) - hose->first_busno);
- pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
- sub_bus - hose->first_busno);
- pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
-
- if (pci_mem) {
- /* Round memory allocator to 1MB boundary */
- pciauto_region_align(pci_mem, 0x100000);
-
- /* Set up memory and I/O filter limits, assume 32-bit I/O space */
- pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
- (pci_mem->bus_lower & 0xfff00000) >> 16);
-
- cmdstat |= PCI_COMMAND_MEMORY;
- }
-
- if (pci_prefetch) {
- /* Round memory allocator to 1MB boundary */
- pciauto_region_align(pci_prefetch, 0x100000);
-
- /* Set up memory and I/O filter limits, assume 32-bit I/O space */
- pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
- (pci_prefetch->bus_lower & 0xfff00000) >> 16);
- if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
-#ifdef CONFIG_SYS_PCI_64BIT
- pci_hose_write_config_dword(hose, dev,
- PCI_PREF_BASE_UPPER32,
- pci_prefetch->bus_lower >> 32);
-#else
- pci_hose_write_config_dword(hose, dev,
- PCI_PREF_BASE_UPPER32,
- 0x0);
-#endif
-
- cmdstat |= PCI_COMMAND_MEMORY;
- } else {
- /* We don't support prefetchable memory for now, so disable */
- pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
- pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
- if (prefechable_64 == PCI_PREF_RANGE_TYPE_64) {
- pci_hose_write_config_word(hose, dev, PCI_PREF_BASE_UPPER32, 0x0);
- pci_hose_write_config_word(hose, dev, PCI_PREF_LIMIT_UPPER32, 0x0);
- }
- }
-
- if (pci_io) {
- /* Round I/O allocator to 4KB boundary */
- pciauto_region_align(pci_io, 0x1000);
-
- pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
- (pci_io->bus_lower & 0x0000f000) >> 8);
- pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
- (pci_io->bus_lower & 0xffff0000) >> 16);
-
- cmdstat |= PCI_COMMAND_IO;
- }
-
- /* Enable memory and I/O accesses, enable bus master */
- pci_hose_write_config_word(hose, dev, PCI_COMMAND,
- cmdstat | PCI_COMMAND_MASTER);
-}
-
-void pciauto_postscan_setup_bridge(struct pci_controller *hose,
- pci_dev_t dev, int sub_bus)
-{
- struct pci_region *pci_mem;
- struct pci_region *pci_prefetch;
- struct pci_region *pci_io;
-
- pci_mem = hose->pci_mem;
- pci_prefetch = hose->pci_prefetch;
- pci_io = hose->pci_io;
-
- /* Configure bus number registers */
- pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
- sub_bus - hose->first_busno);
-
- if (pci_mem) {
- /* Round memory allocator to 1MB boundary */
- pciauto_region_align(pci_mem, 0x100000);
-
- pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
- (pci_mem->bus_lower - 1) >> 16);
- }
-
- if (pci_prefetch) {
- u16 prefechable_64;
-
- pci_hose_read_config_word(hose, dev,
- PCI_PREF_MEMORY_LIMIT,
- &prefechable_64);
- prefechable_64 &= PCI_PREF_RANGE_TYPE_MASK;
-
- /* Round memory allocator to 1MB boundary */
- pciauto_region_align(pci_prefetch, 0x100000);
-
- pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
- (pci_prefetch->bus_lower - 1) >> 16);
- if (prefechable_64 == PCI_PREF_RANGE_TYPE_64)
-#ifdef CONFIG_SYS_PCI_64BIT
- pci_hose_write_config_dword(hose, dev,
- PCI_PREF_LIMIT_UPPER32,
- (pci_prefetch->bus_lower - 1) >> 32);
-#else
- pci_hose_write_config_dword(hose, dev,
- PCI_PREF_LIMIT_UPPER32,
- 0x0);
-#endif
- }
-
- if (pci_io) {
- /* Round I/O allocator to 4KB boundary */
- pciauto_region_align(pci_io, 0x1000);
-
- pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
- ((pci_io->bus_lower - 1) & 0x0000f000) >> 8);
- pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
- ((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
- }
-}
-
-
-/*
- * HJF: Changed this to return int. I think this is required
- * to get the correct result when scanning bridges
- */
-int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
-{
- struct pci_region *pci_mem;
- struct pci_region *pci_prefetch;
- struct pci_region *pci_io;
- unsigned int sub_bus = PCI_BUS(dev);
- unsigned short class;
- int n;
-
- pci_mem = hose->pci_mem;
- pci_prefetch = hose->pci_prefetch;
- pci_io = hose->pci_io;
-
- pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
-
- switch (class) {
- case PCI_CLASS_BRIDGE_PCI:
- debug("PCI Autoconfig: Found P2P bridge, device %d\n",
- PCI_DEV(dev));
-
- pciauto_setup_device(hose, dev, 2, pci_mem,
- pci_prefetch, pci_io);
-
- /* Passing in current_busno allows for sibling P2P bridges */
- hose->current_busno++;
- pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
- /*
- * need to figure out if this is a subordinate bridge on the bus
- * to be able to properly set the pri/sec/sub bridge registers.
- */
- n = pci_hose_scan_bus(hose, hose->current_busno);
-
- /* figure out the deepest we've gone for this leg */
- sub_bus = max((unsigned int)n, sub_bus);
- pciauto_postscan_setup_bridge(hose, dev, sub_bus);
-
- sub_bus = hose->current_busno;
- break;
-
- case PCI_CLASS_BRIDGE_CARDBUS:
- /*
- * just do a minimal setup of the bridge,
- * let the OS take care of the rest
- */
- pciauto_setup_device(hose, dev, 0, pci_mem,
- pci_prefetch, pci_io);
-
- debug("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
- PCI_DEV(dev));
-
- hose->current_busno++;
- break;
-
-#if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
- case PCI_CLASS_BRIDGE_OTHER:
- debug("PCI Autoconfig: Skipping bridge device %d\n",
- PCI_DEV(dev));
- break;
-#endif
-#if defined(CONFIG_ARCH_MPC834X) && !defined(CONFIG_TARGET_VME8349) && \
- !defined(CONFIG_TARGET_CADDY2)
- case PCI_CLASS_BRIDGE_OTHER:
- /*
- * The host/PCI bridge 1 seems broken in 8349 - it presents
- * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
- * device claiming resources io/mem/irq.. we only allow for
- * the PIMMR window to be allocated (BAR0 - 1MB size)
- */
- debug("PCI Autoconfig: Broken bridge found, only minimal config\n");
- pciauto_setup_device(hose, dev, 0, hose->pci_mem,
- hose->pci_prefetch, hose->pci_io);
- break;
-#endif
-
- case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
- debug("PCI AutoConfig: Found PowerPC device\n");
-
- default:
- pciauto_setup_device(hose, dev, 6, pci_mem,
- pci_prefetch, pci_io);
- break;
- }
-
- return sub_bus;
-}