PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c
index c48b2ef..7727554 100644
--- a/arch/arm/cpu/pxa/cpu.c
+++ b/arch/arm/cpu/pxa/cpu.c
@@ -234,21 +234,21 @@
writel(CONFIG_SYS_GPSR0_VAL, GPSR0);
writel(CONFIG_SYS_GPSR1_VAL, GPSR1);
writel(CONFIG_SYS_GPSR2_VAL, GPSR2);
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
writel(CONFIG_SYS_GPSR3_VAL, GPSR3);
#endif
writel(CONFIG_SYS_GPCR0_VAL, GPCR0);
writel(CONFIG_SYS_GPCR1_VAL, GPCR1);
writel(CONFIG_SYS_GPCR2_VAL, GPCR2);
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
writel(CONFIG_SYS_GPCR3_VAL, GPCR3);
#endif
writel(CONFIG_SYS_GPDR0_VAL, GPDR0);
writel(CONFIG_SYS_GPDR1_VAL, GPDR1);
writel(CONFIG_SYS_GPDR2_VAL, GPDR2);
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
writel(CONFIG_SYS_GPDR3_VAL, GPDR3);
#endif
@@ -258,7 +258,7 @@
writel(CONFIG_SYS_GAFR1_U_VAL, GAFR1_U);
writel(CONFIG_SYS_GAFR2_L_VAL, GAFR2_L);
writel(CONFIG_SYS_GAFR2_U_VAL, GAFR2_U);
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
writel(CONFIG_SYS_GAFR3_L_VAL, GAFR3_L);
writel(CONFIG_SYS_GAFR3_U_VAL, GAFR3_U);
#endif
@@ -270,7 +270,7 @@
{
writel(0, ICLR);
writel(0, ICMR);
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
writel(0, ICLR2);
writel(0, ICMR2);
#endif
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 6504819..ba0de8f 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -39,7 +39,7 @@
#include <config.h>
#include <version.h>
-#ifdef CONFIG_PXA25X
+#ifdef CONFIG_CPU_PXA25X
#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800)
#error "Init SP address must be set to 0xfffff800 for PXA250"
#endif
@@ -160,7 +160,7 @@
bl cpu_init_crit
#endif
-#ifdef CONFIG_PXA250
+#ifdef CONFIG_CPU_PXA25X
bl lock_cache_for_stack
#endif
@@ -191,7 +191,7 @@
mov sp, r4
/* Disable the Dcache RAM lock for stack now */
-#ifdef CONFIG_PXA250
+#ifdef CONFIG_CPU_PXA25X
bl cpu_init_crit
#endif
@@ -307,7 +307,7 @@
*
*************************************************************************
*/
-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) || defined(CONFIG_PXA250)
+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) || defined(CONFIG_CPU_PXA25X)
cpu_init_crit:
/*
* flush v4 I/D caches
@@ -327,7 +327,7 @@
mcr p15, 0, r0, c1, c0, 0
mov pc, lr /* back to my caller */
-#endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_PXA250 */
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_CPU_PXA25X */
#ifndef CONFIG_SPL_BUILD
/*
@@ -519,7 +519,7 @@
* This is useful on PXA25x and PXA26x in early bootstages, where there is no
* other possible memory available to hold stack.
*/
-#ifdef CONFIG_PXA250
+#ifdef CONFIG_CPU_PXA25X
.macro CPWAIT reg
mrc p15, 0, \reg, c2, c0, 0
mov \reg, \reg
@@ -602,4 +602,4 @@
/* 0xfff00000 : 1:1, cached mapping */
.word (0xfff << 20) | 0x1c1e
-#endif /* CONFIG_PXA250 */
+#endif /* CONFIG_CPU_PXA25X */
diff --git a/arch/arm/cpu/pxa/timer.c b/arch/arm/cpu/pxa/timer.c
index 2866745..0ad64dd 100644
--- a/arch/arm/cpu/pxa/timer.c
+++ b/arch/arm/cpu/pxa/timer.c
@@ -35,9 +35,9 @@
#error: interrupts not implemented yet
#endif
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define TIMER_FREQ_HZ 3250000
-#elif defined(CONFIG_PXA250)
+#elif defined(CONFIG_CPU_PXA25X)
#define TIMER_FREQ_HZ 3686400
#else
#error "Timer frequency unknown - please config PXA CPU type"
diff --git a/arch/arm/cpu/pxa/usb.c b/arch/arm/cpu/pxa/usb.c
index 0311d5e..83022e2 100644
--- a/arch/arm/cpu/pxa/usb.c
+++ b/arch/arm/cpu/pxa/usb.c
@@ -24,7 +24,7 @@
#include <common.h>
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
+# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_CPU_PXA27X)
#include <asm/arch/pxa-regs.h>
#include <asm/io.h>
@@ -37,7 +37,7 @@
writel(readl(CKENA) | CKENA_2_USBHOST | CKENA_20_UDC, CKENA);
udelay(100);
#endif
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_CPU_PXA27X)
/* Enable USB host clock. */
writel(readl(CKEN) | CKEN10_USBHOST, CKEN);
#endif
@@ -58,7 +58,7 @@
#if defined(CONFIG_CPU_MONAHANS)
writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR);
#endif
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_CPU_PXA27X)
writel(readl(UHCHR) & ~UHCHR_SSEP2, UHCHR);
#endif
writel(readl(UHCHR) & ~(UHCHR_SSEP1 | UHCHR_SSE), UHCHR);
@@ -78,7 +78,7 @@
#if defined(CONFIG_CPU_MONAHANS)
writel(readl(UHCHR) | UHCHR_SSEP0, UHCHR);
#endif
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_CPU_PXA27X)
writel(readl(UHCHR) | UHCHR_SSEP2, UHCHR);
#endif
writel(readl(UHCHR) | UHCHR_SSEP1 | UHCHR_SSE, UHCHR);
@@ -88,7 +88,7 @@
writel(readl(CKENA) & ~(CKENA_2_USBHOST | CKENA_20_UDC), CKENA);
udelay(100);
#endif
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_CPU_PXA27X)
/* Disable USB host clock. */
writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
#endif
@@ -101,5 +101,5 @@
return usb_cpu_stop();
}
-# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */
+# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_CPU_PXA27X) */
#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h
index 52c79a9..8527c68 100644
--- a/arch/arm/include/asm/arch-pxa/pxa-regs.h
+++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h
@@ -109,7 +109,7 @@
#define DCSR13 0x40000034 /* DMA Control / Status Register for Channel 13 */
#define DCSR14 0x40000038 /* DMA Control / Status Register for Channel 14 */
#define DCSR15 0x4000003c /* DMA Control / Status Register for Channel 15 */
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define DCSR16 0x40000040 /* DMA Control / Status Register for Channel 16 */
#define DCSR17 0x40000044 /* DMA Control / Status Register for Channel 17 */
#define DCSR18 0x40000048 /* DMA Control / Status Register for Channel 18 */
@@ -126,7 +126,7 @@
#define DCSR29 0x40000074 /* DMA Control / Status Register for Channel 29 */
#define DCSR30 0x40000078 /* DMA Control / Status Register for Channel 30 */
#define DCSR31 0x4000007c /* DMA Control / Status Register for Channel 31 */
-#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
#define DCSR(x) (0x40000000 | ((x) << 2))
@@ -134,7 +134,7 @@
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#if defined(CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
@@ -438,7 +438,7 @@
/*
* USB Device Controller
*/
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define UDCCR 0x40600000 /* UDC Control Register */
#define UDCCR_UDE (1 << 0) /* UDC enable */
@@ -797,9 +797,9 @@
#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
#define UDC_BCR_MASK (0x3ff)
-#endif /* CONFIG_PXA27X */
+#endif /* CONFIG_CPU_PXA27X */
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
/******************************************************************************/
/*
@@ -870,7 +870,7 @@
#define UP2OCR_CPVPE (1<<1)
#define UP2OCR_CPVEN (1<<0)
-#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
/******************************************************************************/
/*
@@ -923,7 +923,7 @@
#define OWER 0x40A00018 /* OS Timer Watchdog Enable Register */
#define OIER 0x40A0001C /* OS Timer Interrupt Enable Register */
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define OSCR4 0x40A00040 /* OS Timer Counter Register 4 */
#define OSCR5 0x40A00044 /* OS Timer Counter Register 5 */
#define OSCR6 0x40A00048 /* OS Timer Counter Register 6 */
@@ -951,7 +951,7 @@
#define OMCR10 0x40A000D8 /* OS Match Control Register 10 */
#define OMCR11 0x40A000DC /* OS Match Control Register 11 */
-#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
#define OSSR_M4 (1 << 4) /* Match status channel 4 */
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
@@ -1052,7 +1052,7 @@
#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#if !defined(CONFIG_PXA27X)
+#if !defined(CONFIG_CPU_PXA27X)
#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
#endif
#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
@@ -1071,7 +1071,7 @@
#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */
#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */
#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_CPU_PXA27X)
#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */
#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */
#endif
@@ -1087,7 +1087,7 @@
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
-#if !defined(CONFIG_PXA27X)
+#if !defined(CONFIG_CPU_PXA27X)
#define CCCR_L09 (0x1F)
#define CCCR_L27 (0x1)
#define CCCR_L32 (0x2)
@@ -1120,7 +1120,7 @@
#define PWM_PWDUTY1 0x40C00004 /* PWM 1 Duty Cycle Register */
#define PWM_PERVAL1 0x40C00008 /* PWM 1 Period Control Register */
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define PWM_CTRL2 0x40B00010 /* PWM 2 Control Register */
#define PWM_PWDUTY2 0x40B00014 /* PWM 2 Duty Cycle Register */
#define PWM_PERVAL2 0x40B00018 /* PWM 2 Period Control Register */
@@ -1128,7 +1128,7 @@
#define PWM_CTRL3 0x40C00010 /* PWM 3 Control Register */
#define PWM_PWDUTY3 0x40C00014 /* PWM 3 Duty Cycle Register */
#define PWM_PERVAL3 0x40C00018 /* PWM 3 Period Control Register */
-#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
/*
* Interrupt Controller
@@ -1140,14 +1140,14 @@
#define ICPR 0x40D00010 /* Interrupt Controller Pending Register */
#define ICCR 0x40D00014 /* Interrupt Controller Control Register */
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define ICHP 0x40D00018 /* Interrupt Controller Highest Priority Register */
#define ICIP2 0x40D0009C /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 0x40D000A0 /* Interrupt Controller Mask Register 2 */
#define ICLR2 0x40D000A4 /* Interrupt Controller Level Register 2 */
#define ICFP2 0x40D000A8 /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2 0x40D000AC /* Interrupt Controller Pending Register 2 */
-#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
/******************************************************************************/
/*
@@ -1188,7 +1188,7 @@
#define GAFR2_L 0x40E00064 /* GPIO Alternate Function Select Register GPIO<79:64> */
#define GAFR2_U 0x40E00068 /* GPIO Alternate Function Select Register GPIO 80 */
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define GPLR3 0x40E00100 /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3 0x40E0010C /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3 0x40E00118 /* GPIO Pin Output Set Register GPIO<127:96> */
@@ -1198,7 +1198,7 @@
#define GEDR3 0x40E00148 /* GPIO Edge Detect Status Register GPIO<127:96> */
#define GAFR3_L 0x40E0006C /* GPIO Alternate Function Select Register GPIO<111:96> */
#define GAFR3_U 0x40E00070 /* GPIO Alternate Function Select Register GPIO<127:112> */
-#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */
#ifdef CONFIG_CPU_MONAHANS
#define GSDR0 0x40E00400 /* Bit-wise Set of GPDR[31:0] */
@@ -1244,7 +1244,7 @@
#define _GEDR(x) (0x40E00048 + (((x) & 0x60) >> 3))
#define _GAFR(x) (0x40E00054 + (((x) & 0x70) >> 2))
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define GPLR(x) (((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3))
#define GPDR(x) (((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3))
#define GPSR(x) (((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3))
@@ -2123,7 +2123,7 @@
#define LCCR0_PDD_S 12
#define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_CPU_PXA27X)
#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */
#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */
#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */
@@ -2249,7 +2249,7 @@
#define LCSR1_IU6 (1 << 29)
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_CPU_PXA27X)
#define LDCMD_SOFINT (1 << 22)
#define LDCMD_EOFINT (1 << 21)
#endif
@@ -2480,7 +2480,7 @@
#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_CPU_PXA27X)
#define ARB_CNTRL 0x48000048 /* Arbiter Control Register */
@@ -2494,7 +2494,7 @@
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-#endif /* CONFIG_PXA27X */
+#endif /* CONFIG_CPU_PXA27X */
/* LCD registers */
#define LCCR4 0x44000010 /* LCD Controller Control Register 4 */
@@ -2628,6 +2628,6 @@
#define OSCR4 0x40A00040 /* OS Timer Counter Register */
#define OMCR4 0x40A000C0 /* */
-#endif /* CONFIG_PXA27X */
+#endif /* CONFIG_CPU_PXA27X */
#endif /* _PXA_REGS_H_ */
diff --git a/common/lcd.c b/common/lcd.c
index 6313ec0..bf1a6a9 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -41,7 +41,9 @@
#include <lcd.h>
#include <watchdog.h>
-#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS
+#if defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
+ defined(CONFIG_CPU_MONAHANS)
+#define CONFIG_CPU_PXA
#include <asm/byteorder.h>
#endif
@@ -512,7 +514,7 @@
uchar *bmap;
uchar *fb;
ushort *fb16;
-#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS
+#if defined(CONFIG_CPU_PXA)
struct pxafb_info *fbi = &panel_info.pxa;
#elif defined(CONFIG_MPC823)
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
@@ -528,7 +530,7 @@
if (NBITS(panel_info.vl_bpix) < 12) {
/* Leave room for default color map */
-#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS
+#if defined(CONFIG_CPU_PXA)
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]);
@@ -623,7 +625,7 @@
unsigned long width, height, byte_width;
unsigned long pwidth = panel_info.vl_col;
unsigned colors, bpix, bmp_bpix;
-#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS
+#if defined(CONFIG_CPU_PXA)
struct pxafb_info *fbi = &panel_info.pxa;
#elif defined(CONFIG_MPC823)
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
@@ -663,7 +665,7 @@
#if !defined(CONFIG_MCC200)
/* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
if (bmp_bpix == 8) {
-#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS
+#if defined(CONFIG_CPU_PXA)
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
@@ -752,7 +754,7 @@
WATCHDOG_RESET();
for (j = 0; j < width; j++) {
if (bpix != 16) {
-#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS || defined(CONFIG_ATMEL_LCD)
+#if defined(CONFIG_CPU_PXA) || defined(CONFIG_ATMEL_LCD)
*(fb++) = *(bmap++);
#elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
*(fb++) = 255 - *(bmap++);
diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c
index 3c2905c..2b58a98 100644
--- a/drivers/mmc/pxa_mmc.c
+++ b/drivers/mmc/pxa_mmc.c
@@ -129,7 +129,7 @@
writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK);
while (len) {
if (readl(MMC_I_REG) & MMC_I_REG_RXFIFO_RD_REQ) {
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
int i;
for (i = min(len, 32); i; i--) {
*dst++ = readb(MMC_RXFIFO);
@@ -560,7 +560,8 @@
/* Reset device interface type */
mmc_dev.if_type = IF_TYPE_UNKNOWN;
-#if defined (CONFIG_LUBBOCK) || (defined (CONFIG_GUMSTIX) && !defined(CONFIG_PXA27X))
+#if defined(CONFIG_LUBBOCK) || \
+ (defined(CONFIG_GUMSTIX) && !defined(CONFIG_CPU_PXA27X))
set_GPIO_mode(GPIO6_MMCCLK_MD);
set_GPIO_mode(GPIO8_MMCCS0_MD);
#endif
@@ -633,7 +634,7 @@
writel(0, MMC_CLKRT); /* 20 MHz */
resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1);
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
if (IF_TYPE_SD == mmc_dev.if_type) {
resp = mmc_cmd(MMC_CMD_APP_CMD, rca, 0, MMC_CMDAT_R1);
resp = mmc_cmd(SD_CMD_APP_SET_BUS_WIDTH, 0, 2, MMC_CMDAT_R1);
diff --git a/drivers/mmc/pxa_mmc_gen.c b/drivers/mmc/pxa_mmc_gen.c
index 28e37b4..4a7c67a 100644
--- a/drivers/mmc/pxa_mmc_gen.c
+++ b/drivers/mmc/pxa_mmc_gen.c
@@ -30,12 +30,12 @@
#include <asm/io.h>
/* PXAMMC Generic default config for various CPUs */
-#if defined(CONFIG_PXA250)
+#if defined(CONFIG_CPU_PXA25X)
#define PXAMMC_FIFO_SIZE 1
#define PXAMMC_MIN_SPEED 312500
#define PXAMMC_MAX_SPEED 20000000
#define PXAMMC_HOST_CAPS (0)
-#elif defined(CONFIG_PXA27X)
+#elif defined(CONFIG_CPU_PXA27X)
#define PXAMMC_CRC_SKIP
#define PXAMMC_FIFO_SIZE 32
#define PXAMMC_MIN_SPEED 304000
diff --git a/drivers/net/lan91c96.h b/drivers/net/lan91c96.h
index 6fbb0e3..bef1522 100644
--- a/drivers/net/lan91c96.h
+++ b/drivers/net/lan91c96.h
@@ -68,7 +68,7 @@
#define SMC_IO_EXTENT 16
-#ifdef CONFIG_PXA250
+#ifdef CONFIG_CPU_PXA25X
#ifdef CONFIG_LUBBOCK
#define SMC_IO_SHIFT 2
@@ -146,7 +146,7 @@
}; \
})
-#else /* if not CONFIG_PXA250 */
+#else /* if not CONFIG_CPU_PXA25X */
/*
* We have only 16 Bit PCMCIA access on Socket 0
diff --git a/drivers/net/smc91111.h b/drivers/net/smc91111.h
index 895c749..d70c66f 100644
--- a/drivers/net/smc91111.h
+++ b/drivers/net/smc91111.h
@@ -78,7 +78,7 @@
#define SMC_IO_EXTENT 16
-#ifdef CONFIG_PXA250
+#ifdef CONFIG_CPU_PXA25X
#ifdef CONFIG_XSENGINE
#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+((r)<<1))))
@@ -180,7 +180,7 @@
}; \
})
-#elif defined(CONFIG_LEON) /* if not CONFIG_PXA250 */
+#elif defined(CONFIG_LEON) /* if not CONFIG_CPU_PXA25X */
#define SMC_LEON_SWAP16(_x_) ({ word _x = (_x_); ((_x << 8) | (_x >> 8)); })
@@ -249,7 +249,7 @@
}; \
}while(0)
-#else /* if not CONFIG_PXA250 and not CONFIG_LEON */
+#else /* if not CONFIG_CPU_PXA25X and not CONFIG_LEON */
#ifndef CONFIG_SMC_USE_IOFUNCS /* these macros don't work on some boards */
/*
diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c
index 84bb17c..a9976d7 100644
--- a/drivers/serial/serial_pxa.c
+++ b/drivers/serial/serial_pxa.c
@@ -49,7 +49,7 @@
#define BTUART_INDEX 0
#define FFUART_INDEX 1
#define STUART_INDEX 2
-#elif CONFIG_PXA250
+#elif CONFIG_CPU_PXA25X
#define UART_CLK_BASE (1 << 4) /* HWUART */
#define UART_CLK_REG CKEN
#define HWUART_INDEX 0
@@ -68,7 +68,7 @@
* Only PXA250 has HWUART, to avoid poluting the code with more macros,
* artificially introduce this.
*/
-#ifndef CONFIG_PXA250
+#ifndef CONFIG_CPU_PXA25X
#define HWUART_INDEX 0xff
#endif
diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h
index 14961c1..e449cd7 100644
--- a/drivers/serial/usbtty.h
+++ b/drivers/serial/usbtty.h
@@ -31,7 +31,7 @@
#include <usb/omap1510_udc.h>
#elif defined(CONFIG_MUSB_UDC)
#include <usb/musb_udc.h>
-#elif defined(CONFIG_PXA27X)
+#elif defined(CONFIG_CPU_PXA27X)
#include <usb/pxa27x_udc.h>
#elif defined(CONFIG_SPEAR3XX) || defined(CONFIG_SPEAR600)
#include <usb/spr_udc.h>
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 7d5b504..5e72713 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -37,7 +37,7 @@
COBJS-$(CONFIG_OMAP1510) += omap1510_udc.o
COBJS-$(CONFIG_OMAP1610) += omap1510_udc.o
COBJS-$(CONFIG_MPC885_FAMILY) += mpc8xx_udc.o
-COBJS-$(CONFIG_PXA27X) += pxa27x_udc.o
+COBJS-$(CONFIG_CPU_PXA27X) += pxa27x_udc.o
COBJS-$(CONFIG_SPEARUDC) += spr_udc.o
endif
endif
diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
index b604b52..a5ec224 100644
--- a/include/configs/balloon3.h
+++ b/include/configs/balloon3.h
@@ -25,7 +25,7 @@
/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_BALLOON3 1 /* Balloon3 board */
/*
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 8a3446e..819c5d0 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -25,7 +25,7 @@
/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_VPAC270 1 /* Toradex Colibri PXA270 board */
#undef CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 07bc895..361ffc5 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -34,7 +34,7 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
+#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */
#define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */
#define CONFIG_LCD 1
#ifdef CONFIG_LCD
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index 514bcaa..88f4bfb 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -25,7 +25,7 @@
/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_PALMLD 1 /* Palm LifeDrive board */
/*
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index 026e183..d1fef25 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -27,7 +27,7 @@
/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA250 1 /* Intel PXA255 CPU */
+#define CONFIG_CPU_PXA25X 1 /* Intel PXA255 CPU */
#define CONFIG_PALMTC 1 /* Palm Tungsten|C board */
/*
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index c208a25..0666f7b 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -55,7 +55,7 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
+#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */
#undef CONFIG_LCD
#ifdef CONFIG_LCD
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 2d55044..af464e1 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -40,7 +40,7 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */
+#define CONFIG_CPU_PXA27X 1 /* This is an PXA27x CPU */
#define CONFIG_MMC 1
#define CONFIG_BOARD_LATE_INIT
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index e78b83a..7802f44 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -25,7 +25,7 @@
/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_VPAC270 1 /* Voipac PXA270 board */
#define CONFIG_SYS_TEXT_BASE 0xa0000000
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 5c59ac7..941f80c 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -40,7 +40,7 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_PXA250 1 /* This is an PXA255 CPU */
+#define CONFIG_CPU_PXA25X 1 /* This is an PXA255 CPU */
#define CONFIG_XAENIAX 1 /* on a xaeniax board */
#define CONFIG_SYS_TEXT_BASE 0x0
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index 9505007..26204af 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -25,7 +25,7 @@
/*
* High Level Board Configuration Options
*/
-#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
#define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */
#define CONFIG_SYS_TEXT_BASE 0x0
diff --git a/include/lcd.h b/include/lcd.h
index 83b50f4..d95feeb 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -87,7 +87,8 @@
u_char vl_wbf; /* Wait between frames */
} vidinfo_t;
-#elif defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS
+#elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
+ defined CONFIG_CPU_MONAHANS
/*
* PXA LCD DMA descriptor
*/
@@ -195,7 +196,7 @@
void *priv; /* Pointer to driver-specific data */
} vidinfo_t;
-#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
+#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_MCC200, CONFIG_ATMEL_LCD */
extern vidinfo_t panel_info;