Move machine specific code to board at s3c64xx (v2)
Move machine specific code to smdk6400.
Some board use OneNAND instead of NAND.
Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w.
So it's better to use macro instead of hard-coded value.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
index e0119a7..47f72f6 100644
--- a/board/samsung/smdk6400/lowlevel_init.S
+++ b/board/samsung/smdk6400/lowlevel_init.S
@@ -104,6 +104,13 @@
bl nand_asm_init
#endif
+ /* Memory subsystem address 0x7e00f120 */
+ ldr r0, =ELFIN_MEM_SYS_CFG
+
+ /* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
+ mov r1, #S3C64XX_MEM_SYS_CFG_NAND
+ str r1, [r0]
+
bl mem_ctrl_asm_init
/* Wakeup support. Don't know if it's going to be used, untested. */