* Patch by Gleb Natapov, 19 Sep 2003:
Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
* Patch by Anders Larsen, 17 Sep 2003:
Bring ARM memory layout in sync with the documentation:
stack and malloc-heap are now located _below_ the U-Boot code
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 17c5f86..d640942 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -91,14 +91,6 @@
_armboot_end:
.word armboot_end
-/*
- * _armboot_real_end is the first usable RAM address behind armboot
- * and the various stacks
- */
-.globl _armboot_real_end
-_armboot_real_end:
- .word 0x0badc0de
-
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
@@ -171,28 +163,33 @@
bl cpu_init_crit
#endif
-relocate:
- /*
- * relocate armboot to RAM
- */
- adr r0, _start /* r0 <- current position of code */
+relocate: /* relocate U-Boot to RAM */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ cmp r0, r1 /* don't reloc during debug */
+ beq stack_setup
+
ldr r2, _armboot_start
ldr r3, _armboot_end
- sub r2, r3, r2 /* r2 <- size of armboot */
- ldr r1, _TEXT_BASE /* r1 <- destination address */
- add r2, r0, r2 /* r2 <- source end address */
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
- /*
- * r0 = source address
- * r1 = target address
- * r2 = source end address
- */
copy_loop:
- ldmia r0!, {r3-r10}
- stmia r1!, {r3-r10}
- cmp r0, r2
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
+ /* Set up the stack */
+stack_setup:
+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+#ifdef CONFIG_USE_IRQ
+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
#if 0
/* try doing this stuff after the relocation */
ldr r0, =pWTCON
@@ -214,11 +211,6 @@
/* END stuff after relocation */
#endif
- /* set up the stack */
- ldr r0, _armboot_end
- add r0, r0, #CONFIG_STACKSIZE
- sub sp, r0, #12 /* leave 3 words for abort-stack */
-
ldr pc, _start_armboot
_start_armboot: .word start_armboot