Move at91cap9 specific files to at91sam9 directory
AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
common infrastructure can be used. Let this infrastructure be
named after the AT91SAM9 family, and move the existing AT91CAP9
files to the new place.
Signed-off-by: Stelian Pop <stelian@popies.net>
diff --git a/cpu/arm926ejs/at91cap9/Makefile b/cpu/arm926ejs/at91sam9/Makefile
similarity index 100%
rename from cpu/arm926ejs/at91cap9/Makefile
rename to cpu/arm926ejs/at91sam9/Makefile
diff --git a/cpu/arm926ejs/at91cap9/config.mk b/cpu/arm926ejs/at91sam9/config.mk
similarity index 100%
rename from cpu/arm926ejs/at91cap9/config.mk
rename to cpu/arm926ejs/at91sam9/config.mk
diff --git a/cpu/arm926ejs/at91cap9/ether.c b/cpu/arm926ejs/at91sam9/ether.c
similarity index 93%
rename from cpu/arm926ejs/at91cap9/ether.c
rename to cpu/arm926ejs/at91sam9/ether.c
index b7958d5..8de1bb7 100644
--- a/cpu/arm926ejs/at91cap9/ether.c
+++ b/cpu/arm926ejs/at91sam9/ether.c
@@ -23,12 +23,12 @@
*/
#include <common.h>
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/hardware.h>
extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-void at91cap9_eth_initialize(bd_t *bi)
+void at91sam9_eth_initialize(bd_t *bi)
{
macb_eth_initialize(0, (void *)AT91C_BASE_MACB, 0x00);
}
diff --git a/cpu/arm926ejs/at91cap9/lowlevel_init.S b/cpu/arm926ejs/at91sam9/lowlevel_init.S
similarity index 97%
rename from cpu/arm926ejs/at91cap9/lowlevel_init.S
rename to cpu/arm926ejs/at91sam9/lowlevel_init.S
index 24d950c..40a3f6a 100644
--- a/cpu/arm926ejs/at91cap9/lowlevel_init.S
+++ b/cpu/arm926ejs/at91sam9/lowlevel_init.S
@@ -1,5 +1,5 @@
/*
- * AT91CAP9 setup stuff
+ * AT91CAP9/SAM9 setup stuff
*
* (C) Copyright 2007-2008
* Stelian Pop <stelian.pop <at> leadtechdesign.com>
diff --git a/cpu/arm926ejs/at91cap9/spi.c b/cpu/arm926ejs/at91sam9/spi.c
similarity index 100%
rename from cpu/arm926ejs/at91cap9/spi.c
rename to cpu/arm926ejs/at91sam9/spi.c
diff --git a/cpu/arm926ejs/at91cap9/timer.c b/cpu/arm926ejs/at91sam9/timer.c
similarity index 97%
rename from cpu/arm926ejs/at91cap9/timer.c
rename to cpu/arm926ejs/at91sam9/timer.c
index c6df5bd..79c135f 100644
--- a/cpu/arm926ejs/at91cap9/timer.c
+++ b/cpu/arm926ejs/at91sam9/timer.c
@@ -26,7 +26,7 @@
#include <asm/arch/hardware.h>
/*
- * We're using the AT91CAP9 PITC in 32 bit mode, by
+ * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by
* setting the 20 bit counter period to its maximum (0xfffff).
*/
#define TIMER_LOAD_VAL 0xfffff
@@ -134,8 +134,7 @@
}
/*
- * Reset the cpu by setting up the watchdog timer and let him time out
- * on the AT91CAP9ADK board
+ * Reset the cpu by setting up the watchdog timer and let him time out.
*/
void reset_cpu(ulong ignored)
{
diff --git a/cpu/arm926ejs/at91cap9/usb.c b/cpu/arm926ejs/at91sam9/usb.c
similarity index 96%
rename from cpu/arm926ejs/at91cap9/usb.c
rename to cpu/arm926ejs/at91sam9/usb.c
index 69da5f3..09292a6 100644
--- a/cpu/arm926ejs/at91cap9/usb.c
+++ b/cpu/arm926ejs/at91sam9/usb.c
@@ -24,7 +24,6 @@
#include <common.h>
#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
-#ifdef CONFIG_AT91CAP9
#include <asm/arch/hardware.h>
@@ -50,5 +49,4 @@
return usb_cpu_stop();
}
-#endif /* CONFIG_AT91CAP9 */
#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */