mpc83xx: add support for mpc8309
This processor, though very similar to other members of the
PowerQUICC II Pro family (namely 8308, 8360 and 832x), provides
yet another feature set than any supported sibling.
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index 4ad3ec3..fb0f7aa 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -105,6 +105,8 @@
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+ u32 usbdr_clk;
#endif
#ifdef CONFIG_MPC834x
u32 usbmph_clk;
@@ -120,7 +122,9 @@
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#endif
+#if !defined(CONFIG_MPC8309)
u32 enc_clk;
+#endif
u32 lbiu_clk;
u32 lclk_clk;
u32 mem_clk;
@@ -263,6 +267,7 @@
return -6;
}
#endif
+#if !defined(CONFIG_MPC8309)
switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
case 0:
enc_clk = 0;
@@ -280,6 +285,7 @@
/* unkown SCCR_ENCCM value */
return -7;
}
+#endif
#if defined(CONFIG_FSL_ESDHC)
switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
@@ -332,6 +338,8 @@
i2c1_clk = sdhc_clk;
#elif defined(CONFIG_MPC837x)
i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC8309)
+ i2c1_clk = csb_clk;
#endif
#if !defined(CONFIG_MPC832x)
i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
@@ -460,6 +468,8 @@
gd->tsec1_clk = tsec1_clk;
gd->tsec2_clk = tsec2_clk;
gd->usbdr_clk = usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+ gd->usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_MPC834x)
gd->usbmph_clk = usbmph_clk;
@@ -475,7 +485,9 @@
#if !defined(CONFIG_MPC832x)
gd->i2c2_clk = i2c2_clk;
#endif
+#if !defined(CONFIG_MPC8309)
gd->enc_clk = enc_clk;
+#endif
gd->lbiu_clk = lbiu_clk;
gd->lclk_clk = lclk_clk;
gd->mem_clk = mem_clk;
@@ -536,7 +548,9 @@
#if defined(CONFIG_MPC8360)
printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
#endif
+#if !defined(CONFIG_MPC8309)
printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
+#endif
printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
#if !defined(CONFIG_MPC832x)
printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
@@ -552,6 +566,8 @@
printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+#elif defined(CONFIG_MPC8309)
+ printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
#endif
#if defined(CONFIG_MPC834x)
printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));