configs: ls1012a: add pfe configuration for LS1012A
Add configurations for PFE.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/configs/ls1012a2g5rdb_qspi_defconfig b/configs/ls1012a2g5rdb_qspi_defconfig
index 26dcb1a..af676e2 100644
--- a/configs/ls1012a2g5rdb_qspi_defconfig
+++ b/configs/ls1012a2g5rdb_qspi_defconfig
@@ -31,7 +31,9 @@
CONFIG_DM_MMC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
+CONFIG_FSL_PFE=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
index 1164361..c02e520 100644
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -29,8 +29,10 @@
# CONFIG_MMC is not set
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
+CONFIG_FSL_PFE=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig
index 9fdf333..25470cb 100644
--- a/configs/ls1012aqds_qspi_defconfig
+++ b/configs/ls1012aqds_qspi_defconfig
@@ -36,8 +36,10 @@
CONFIG_DM_MMC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
+CONFIG_FSL_PFE=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig
index 4347263..1f62953 100644
--- a/configs/ls1012ardb_qspi_defconfig
+++ b/configs/ls1012ardb_qspi_defconfig
@@ -32,8 +32,10 @@
CONFIG_DM_MMC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
+CONFIG_DM_ETH=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
+CONFIG_FSL_PFE=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index de1947c..f589978 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1,4 +1,5 @@
source "drivers/net/phy/Kconfig"
+source "drivers/net/pfe_eth/Kconfig"
config DM_ETH
bool "Enable Driver Model for Ethernet drivers"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4a16c62..95cb7bb 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -73,3 +73,4 @@
obj-$(CONFIG_VSC9953) += vsc9953.o
obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o
obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o
+obj-$(CONFIG_FSL_PFE) += pfe_eth/
diff --git a/drivers/net/pfe_eth/Kconfig b/drivers/net/pfe_eth/Kconfig
new file mode 100644
index 0000000..a13b331
--- /dev/null
+++ b/drivers/net/pfe_eth/Kconfig
@@ -0,0 +1,12 @@
+menuconfig FSL_PFE
+ bool "NXP PFE Ethernet driver"
+ help
+ This driver provides support for NXP's Packet Forwarding Engine.
+
+if FSL_PFE
+
+config SYS_FSL_PFE_ADDR
+ hex "PFE base address"
+ default 0x04000000
+
+endif
diff --git a/drivers/net/pfe_eth/Makefile b/drivers/net/pfe_eth/Makefile
new file mode 100644
index 0000000..6b5248f
--- /dev/null
+++ b/drivers/net/pfe_eth/Makefile
@@ -0,0 +1,12 @@
+# Copyright 2015-2016 Freescale Semiconductor, Inc.
+# Copyright 2017 NXP
+#
+# SPDX-License-Identifier:GPL-2.0+
+
+# Layerscape PFE driver
+obj-y += pfe_cmd.o \
+ pfe_driver.o \
+ pfe_eth.o \
+ pfe_firmware.o \
+ pfe_hw.o \
+ pfe_mdio.o
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index 25df103..dbb0fcc 100644
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -9,15 +9,6 @@
#include "ls1012a_common.h"
-/* PFE Ethernet */
-#ifdef CONFIG_FSL_PFE
-#define EMAC1_PHY_ADDR 0x2
-#define EMAC2_PHY_ADDR 0x1
-#define CONFIG_PHYLIB
-#define CONFIG_PHYLIB_10G
-#define CONFIG_PHY_AQUANTIA
-#endif
-
/* DDR */
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
@@ -110,7 +101,7 @@
#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
"env exists secureboot && esbc_halt;"
#endif
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index a58b867..0f8033f 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -112,9 +112,9 @@
"kernel_size=0x2800000\0" \
#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\
- "$kernel_start $kernel_size && "\
- "bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND "pfe stop; sf probe 0:0; sf read $kernel_load "\
+ "$kernel_start $kernel_size && "\
+ "bootm $kernel_load"
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 297c057..7c080a0 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -68,7 +68,7 @@
"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index 43f6236..442c95e 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -117,7 +117,7 @@
"bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
"env exists secureboot && esbc_halt;"
#include <asm/fsl_secure_boot.h>