powerpc/85xx: Add P1021 specific QE and UEC support
P1021 has some QE pins which need to be set in pmuxcr register before
using QE functions. In this patch, pin QE0 and QE3 are set for UCC1 and
UCC5 in Eth mode. QE9 and QE12 are set for MII management. QE12 needs to
be released after MII access because QE12 pin is muxed with LBCTL signal.
Also added relevant QE support defines unique to P1021.
The P1021 QE is shared on P1012, P1016, and P1025.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index e530494..c4c156d 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -28,6 +28,7 @@
#include <common.h>
#include <ppc_asm.tmpl>
+#include <linux/compiler.h>
#include <asm/processor.h>
#include <asm/io.h>
@@ -156,7 +157,7 @@
#endif
int i;
#ifdef CONFIG_QE
- u32 qe_ratio;
+ __maybe_unused u32 qe_ratio;
#endif
plat_ratio = (gur->porpllsr) & 0x0000003e;
@@ -184,10 +185,15 @@
#endif
#ifdef CONFIG_QE
+#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
+ defined(CONFIG_P1021) || defined(CONFIG_P1025)
+ sysInfo->freqQE = sysInfo->freqSystemBus;
+#else
qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
#endif
+#endif
#ifdef CONFIG_SYS_DPAA_FMAN
sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 4228161..59aeb31 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -115,6 +115,9 @@
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
/* P1013 is single core version of P1022 */
#elif defined(CONFIG_P1013)
@@ -155,6 +158,9 @@
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
/* P1017 is single core version of P1023 */
#elif defined(CONFIG_P1017)
@@ -185,6 +191,9 @@
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_P1022)
#define CONFIG_MAX_CPUS 2
@@ -225,6 +234,9 @@
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
/* P2010 is single core version of P2020 */
#elif defined(CONFIG_P2010)
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index d26d648..7beb6a7 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1923,6 +1923,19 @@
#define MPC85xx_PMUXCR_SD_DATA 0x80000000
#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
+#define MPC85xx_PMUXCR_QE0 0x00008000
+#define MPC85xx_PMUXCR_QE1 0x00004000
+#define MPC85xx_PMUXCR_QE2 0x00002000
+#define MPC85xx_PMUXCR_QE3 0x00001000
+#define MPC85xx_PMUXCR_QE4 0x00000800
+#define MPC85xx_PMUXCR_QE5 0x00000400
+#define MPC85xx_PMUXCR_QE6 0x00000200
+#define MPC85xx_PMUXCR_QE7 0x00000100
+#define MPC85xx_PMUXCR_QE8 0x00000080
+#define MPC85xx_PMUXCR_QE9 0x00000040
+#define MPC85xx_PMUXCR_QE10 0x00000020
+#define MPC85xx_PMUXCR_QE11 0x00000010
+#define MPC85xx_PMUXCR_QE12 0x00000008
u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
u8 res6[8];
u32 devdisr; /* Device disable control */
@@ -1956,29 +1969,36 @@
u8 res9[12];
u32 pvr; /* Processor version */
u32 svr; /* System version */
- u8 res10a[8];
+ u8 res10[8];
u32 rstcr; /* Reset control */
#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569)
- u8 res10b[76];
+ u8 res11a[76];
par_io_t qe_par_io[7];
- u8 res10c[1600];
+ u8 res11b[1600];
+#elif defined(CONFIG_P1012) || defined(CONFIG_P1016) || \
+ defined(CONFIG_P1021) || defined(CONFIG_P1025)
+ u8 res11a[12];
+ u32 iovselsr;
+ u8 res11b[60];
+ par_io_t qe_par_io[3];
+ u8 res11c[1496];
#else
- u8 res10b[1868];
+ u8 res11a[1868];
#endif
u32 clkdvdr; /* Clock Divide register */
- u8 res10d[1532];
+ u8 res12[1532];
u32 clkocr; /* Clock out select */
- u8 res11[12];
+ u8 res13[12];
u32 ddrdllcr; /* DDR DLL control */
- u8 res12[12];
+ u8 res14[12];
u32 lbcdllcr; /* LBC DLL control */
- u8 res13[248];
+ u8 res15[248];
u32 lbiuiplldcr0; /* LBIU PLL Debug Reg 0 */
u32 lbiuiplldcr1; /* LBIU PLL Debug Reg 1 */
u32 ddrioovcr; /* DDR IO Override Control */
u32 tsec12ioovcr; /* eTSEC 1/2 IO override control */
u32 tsec34ioovcr; /* eTSEC 3/4 IO override control */
- u8 res15[61648];
+ u8 res16[61648];
} ccsr_gur_t;
#endif