diff --git a/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt b/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt
index 926e3e8..e6ea8d0 100644
--- a/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt
+++ b/doc/device-tree-bindings/memory-controllers/st,stm32mp1-ddr.txt
@@ -3,7 +3,8 @@
 --------------------
 Required properties:
 --------------------
-- compatible	: Should be "st,stm32mp1-ddr"
+- compatible	: Should be "st,stm32mp1-ddr" for STM32MP15x
+		  Should be "st,stm32mp13-ddr" for STM32MP13x
 - reg		: controleur (DDRCTRL) and phy (DDRPHYC) base address
 - clocks	: controller clocks handle
 - clock-names	: associated controller clock names
@@ -13,6 +14,8 @@
 the next attributes are DDR parameters, they are generated by DDR tools
 included in STM32 Cube tool
 
+They are required only in SPL, when TFABOOT is not activated.
+
 info attributes:
 ----------------
 - st,mem-name	: name for DDR configuration, simple string for information
@@ -24,7 +27,7 @@
 -----------------------
 - st,ctl-reg	: controleur values depending of the DDR type
 		  (DDR3/LPDDR2/LPDDR3)
-	for STM32MP15x: 25 values are requested in this order
+	for STM32MP15x and STM32MP13x: 25 values are requested in this order
 		MSTR
 		MRCTRL0
 		MRCTRL1
@@ -53,7 +56,7 @@
 
 - st,ctl-timing	: controleur values depending of frequency and timing parameter
 		  of DDR
-	for STM32MP15x: 12 values are requested in this order
+	for STM32MP15x and STM32MP13x: 12 values are requested in this order
 		RFSHTMG
 		DRAMTMG0
 		DRAMTMG1
@@ -68,7 +71,7 @@
 		ODTCFG
 
 - st,ctl-map	: controleur values depending of address mapping
-	for STM32MP15x: 9 values are requested in this order
+	for STM32MP15x and STM32MP13x: 9 values are requested in this order
 		ADDRMAP1
 		ADDRMAP2
 		ADDRMAP3
@@ -99,6 +102,19 @@
 		PCFGWQOS0_1
 		PCFGWQOS1_1
 
+	for STM32MP13x: 11 values are requested in this order
+		SCHED
+		SCHED1
+		PERFHPR1
+		PERFLPR1
+		PERFWR1
+		PCFGR_0
+		PCFGW_0
+		PCFGQOS0_0
+		PCFGQOS1_0
+		PCFGWQOS0_0
+		PCFGWQOS1_0
+
 phyc attributes:
 ----------------
 - st,phy-reg	: phy values depending of the DDR type (DDR3/LPDDR2/LPDDR3)
@@ -115,8 +131,19 @@
 		DX2GCR
 		DX3GCR
 
+	for STM32MP13x: 9 values are requested in this order
+		PGCR
+		ACIOCR
+		DXCCR
+		DSGCR
+		DCR
+		ODTCR
+		ZQ0CR1
+		DX0GCR
+		DX1GCR
+
 - st,phy-timing	: phy values depending of frequency and timing parameter of DDR
-	for STM32MP15x: 10 values are requested in this order
+	for STM32MP15x and STM32MP13x: 10 values are requested in this order
 		PTR0
 		PTR1
 		PTR2
@@ -128,16 +155,18 @@
 		MR2
 		MR3
 
+	for STM32MP13x: 6 values are requested in this order
+		DX0DLLCR
+		DX0DQTR
+		DX0DQSTR
+		DX1DLLCR
+		DX1DQTR
+		DX1DQSTR
 Example:
 
 / {
 	soc {
-		u-boot,dm-spl;
-
 		ddr: ddr@0x5A003000{
-			u-boot,dm-spl;
-			u-boot,dm-pre-reloc;
-
 			compatible = "st,stm32mp1-ddr";
 
 			reg = <0x5A003000 0x550
diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c
index 49b1262..a6c19af 100644
--- a/drivers/ram/stm32mp1/stm32mp1_ram.c
+++ b/drivers/ram/stm32mp1/stm32mp1_ram.c
@@ -230,29 +230,29 @@
 
 	reg = readl(&ctl->addrmap3);
 	/* addrmap3.addrmap_col_b6 */
-	val = (reg & GENMASK(3, 0)) >> 0;
+	val = (reg & GENMASK(4, 0)) >> 0;
 	if (val <= 7)
 		bits++;
 	/* addrmap3.addrmap_col_b7 */
-	val = (reg & GENMASK(11, 8)) >> 8;
+	val = (reg & GENMASK(12, 8)) >> 8;
 	if (val <= 7)
 		bits++;
 	/* addrmap3.addrmap_col_b8 */
-	val = (reg & GENMASK(19, 16)) >> 16;
+	val = (reg & GENMASK(20, 16)) >> 16;
 	if (val <= 7)
 		bits++;
 	/* addrmap3.addrmap_col_b9 */
-	val = (reg & GENMASK(27, 24)) >> 24;
+	val = (reg & GENMASK(28, 24)) >> 24;
 	if (val <= 7)
 		bits++;
 
 	reg = readl(&ctl->addrmap4);
 	/* addrmap4.addrmap_col_b10 */
-	val = (reg & GENMASK(3, 0)) >> 0;
+	val = (reg & GENMASK(4, 0)) >> 0;
 	if (val <= 7)
 		bits++;
 	/* addrmap4.addrmap_col_b11 */
-	val = (reg & GENMASK(11, 8)) >> 8;
+	val = (reg & GENMASK(12, 8)) >> 8;
 	if (val <= 7)
 		bits++;
 
@@ -296,21 +296,24 @@
 	reg = readl(&ctl->addrmap6);
 	/* addrmap6.addrmap_row_b12 */
 	val = (reg & GENMASK(3, 0)) >> 0;
-	if (val <= 7)
+	if (val <= 11)
 		bits++;
 	/* addrmap6.addrmap_row_b13 */
 	val = (reg & GENMASK(11, 8)) >> 8;
-	if (val <= 7)
+	if (val <= 11)
 		bits++;
 	/* addrmap6.addrmap_row_b14 */
 	val = (reg & GENMASK(19, 16)) >> 16;
-	if (val <= 7)
+	if (val <= 11)
 		bits++;
 	/* addrmap6.addrmap_row_b15 */
 	val = (reg & GENMASK(27, 24)) >> 24;
-	if (val <= 7)
+	if (val <= 11)
 		bits++;
 
+	if (reg & BIT(31))
+		printf("warning: LPDDR3_6GB_12GB is not supported\n");
+
 	return bits;
 }
 
@@ -392,12 +395,17 @@
 	.get_info = stm32mp1_ddr_get_info,
 };
 
+static const struct stm32mp1_ddr_cfg stm32mp13x_ddr_cfg = {
+	.nb_bytes = 2,
+};
+
 static const struct stm32mp1_ddr_cfg stm32mp15x_ddr_cfg = {
 	.nb_bytes = 4,
 };
 
 static const struct udevice_id stm32mp1_ddr_ids[] = {
 	{ .compatible = "st,stm32mp1-ddr", .data = (ulong)&stm32mp15x_ddr_cfg},
+	{ .compatible = "st,stm32mp13-ddr", .data = (ulong)&stm32mp13x_ddr_cfg},
 	{ }
 };