powerpc/8xxx: Refactor SRIO initialization into common code

Moved the SRIO init out of corenet_ds and into common code for
8xxx/QorIQ processors that have SRIO.  We mimic what we do with PCIe
controllers for SRIO.

We utilize the fact that SRIO is over serdes to determine if its
configured or not and thus can setup the LAWs needed for it dynamically.

We additionally update the device tree (to remove the SRIO nodes) if the
board doesn't have SRIO enabled.

Introduced the following standard defines for board config.h:

CONFIG_SYS_SRIO - Chip has SRIO or not
CONFIG_SRIO1 - Board has SRIO 1 port available
CONFIG_SRIO2 - Board has SRIO 2 port available

(where 'n' is the port #)
CONFIG_SYS_SRIOn_MEM_VIRT - virtual address in u-boot
CONFIG_SYS_SRIOn_MEM_PHYS - physical address (for law setup)
CONFIG_SYS_SRIOn_MEM_SIZE - size of window (for law setup)

[ These mimic what we have for PCI and PCIe controllers ]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Wolfgang Denk <wd@denx.de>
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 4a6cc65..1d016c4 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2003 Motorola Inc.
  * Modified by Xianghua Xiao, X.Xiao@motorola.com
@@ -40,6 +40,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+extern void srio_init(void);
+
 #ifdef CONFIG_QE
 extern qe_iop_conf_t qe_iop_conf_tab[];
 extern void qe_config_iopin(u8 port, u8 pin, int dir,
@@ -384,6 +386,10 @@
 	/* needs to be in ram since code uses global static vars */
 	fsl_serdes_init();
 
+#ifdef CONFIG_SYS_SRIO
+	srio_init();
+#endif
+
 #if defined(CONFIG_MP)
 	setup_mp();
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 53e0596..00fa752 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -38,6 +38,7 @@
 
 extern void ft_qe_setup(void *blob);
 extern void ft_fixup_num_cores(void *blob);
+extern void ft_srio_setup(void *blob);
 
 #ifdef CONFIG_MP
 #include "mp.h"
@@ -478,4 +479,8 @@
 
 	fdt_fixup_qportals(blob);
 #endif
+
+#ifdef CONFIG_SYS_SRIO
+	ft_srio_setup(blob);
+#endif
 }
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index 95c73be..5dfd65b 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -16,6 +16,7 @@
 
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o
+COBJS-$(CONFIG_SYS_SRIO) += srio.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 54e60bb..0c166fd 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
  * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
  * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
@@ -28,6 +28,7 @@
 #include <fdt_support.h>
 #include <asm/mp.h>
 #include <asm/fsl_enet.h>
+#include <asm/fsl_serdes.h>
 
 #if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
 static int ft_del_cpuhandle(void *blob, int cpuhandle)
@@ -239,3 +240,23 @@
 	return fdt_setprop_string(blob, offset, "phy-connection-type",
 					 fsl_phy_enet_if_str[phyc]);
 }
+
+#ifdef CONFIG_SYS_SRIO
+void ft_srio_setup(void *blob)
+{
+#ifdef CONFIG_SRIO1
+	if (!is_serdes_configured(SRIO1)) {
+		fdt_del_node_and_alias(blob, "rio0");
+	}
+#else
+	fdt_del_node_and_alias(blob, "rio0");
+#endif
+#ifdef CONFIG_SRIO2
+	if (!is_serdes_configured(SRIO2)) {
+		fdt_del_node_and_alias(blob, "rio1");
+	}
+#else
+	fdt_del_node_and_alias(blob, "rio1");
+#endif
+}
+#endif
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
new file mode 100644
index 0000000..e46d328
--- /dev/null
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+
+#if defined(CONFIG_FSL_CORENET)
+	#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
+	#define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2
+	#define _DEVDISR_RMU   FSL_CORENET_DEVDISR_RMU
+	#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
+#elif defined(CONFIG_MPC85xx)
+	#define _DEVDISR_SRIO1 MPC85xx_DEVDISR_SRIO
+	#define _DEVDISR_SRIO2 MPC85xx_DEVDISR_SRIO
+	#define _DEVDISR_RMU   MPC85xx_DEVDISR_RMSG
+	#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
+#elif defined(CONFIG_MPC86xx)
+	#define _DEVDISR_SRIO1 MPC86xx_DEVDISR_SRIO
+	#define _DEVDISR_SRIO2 MPC86xx_DEVDISR_SRIO
+	#define _DEVDISR_RMU   MPC86xx_DEVDISR_RMSG
+	#define CONFIG_SYS_MPC8xxx_GUTS_ADDR \
+		(&((immap_t *)CONFIG_SYS_IMMR)->im_gur)
+#else
+#error "No defines for DEVDISR_SRIO"
+#endif
+
+void srio_init(void)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
+	int srio1_used = 0, srio2_used = 0;
+
+	if (is_serdes_configured(SRIO1)) {
+		set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS,
+				law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE),
+				LAW_TRGT_IF_RIO_1);
+		srio1_used = 1;
+		printf("SRIO1: enabled\n");
+	} else {
+		printf("SRIO1: disabled\n");
+	}
+
+#ifdef CONFIG_SRIO2
+	if (is_serdes_configured(SRIO2)) {
+		set_next_law(CONFIG_SYS_SRIO2_MEM_PHYS,
+				law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE),
+				LAW_TRGT_IF_RIO_2);
+		srio2_used = 1;
+		printf("SRIO2: enabled\n");
+	} else {
+		printf("SRIO2: disabled\n");
+	}
+#endif
+
+#ifdef CONFIG_FSL_CORENET
+	/* On FSL_CORENET devices we can disable individual ports */
+	if (!srio1_used)
+		setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1);
+	if (!srio2_used)
+		setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2);
+#endif
+
+	/* neither port is used - disable everything */
+	if (!srio1_used && !srio2_used) {
+		setbits_be32(&gur->devdisr, _DEVDISR_SRIO1);
+		setbits_be32(&gur->devdisr, _DEVDISR_SRIO2);
+		setbits_be32(&gur->devdisr, _DEVDISR_RMU);
+	}
+}
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index 0e255ff..6a4279c 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -90,6 +90,7 @@
 #define LAW_TRGT_IF_PCI_1	LAW_TRGT_IF_PCI
 #define LAW_TRGT_IF_PCIX	LAW_TRGT_IF_PCI
 #define LAW_TRGT_IF_PCIE_2	LAW_TRGT_IF_PCI_2
+#define LAW_TRGT_IF_RIO_1	LAW_TRGT_IF_RIO
 
 #ifdef CONFIG_MPC8641
 #define LAW_TRGT_IF_PCIE_1	LAW_TRGT_IF_PCI