mpc85xx: Add support for SBC8548 (updated)
Add support for Wind River's SBC8548 reference board.
Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
diff --git a/doc/README.sbc8548 b/doc/README.sbc8548
new file mode 100644
index 0000000..b34d040
--- /dev/null
+++ b/doc/README.sbc8548
@@ -0,0 +1,27 @@
+Wind River SBC8548 reference board
+===========================
+
+Copyright 2007, Embedded Specialties, Inc.
+Copyright 2007 Wind River Systemes, Inc.
+-----------------------------
+
+1. Building U-Boot
+------------------
+The SBC8548 code is known to build using ELDK 4.1.
+
+ $ make sbc8548_config
+ Configuring for sbc8548 board...
+
+ $ make
+
+
+2. Switch and Jumper Settings
+-----------------------------
+All Jumpers & Switches are in their default positions. Please refer to
+the board documentation for details. Some settings control CPU voltages
+and settings may change with board revisions.
+
+3. Known limitations
+--------------------
+PCI:
+ The code to support PCI is currently disabled and has not been verified.