Fix some more print() format errors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index de59991..d5cee64 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -29,6 +29,8 @@
#ifdef CONFIG_MISC_INIT_R
#include <i2c.h>
#endif
+#include "iopin.h" /* for iopin_initialize() prototype */
+
/* Clocks in use */
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
CLOCK_SCCR1_LPC_EN | \
@@ -52,8 +54,7 @@
int board_early_init_f (void)
{
volatile immap_t *im = (immap_t *) CFG_IMMR;
- u32 lpcaw, tmp32;
- int i;
+ u32 lpcaw;
/*
* Initialize Local Window for the CPLD registers access (CS2 selects
@@ -206,6 +207,7 @@
int misc_init_r(void)
{
u8 tmp_val;
+ extern int ads5121_diu_init(void);
/* Using this for DIU init before the driver in linux takes over
* Enable the TFP410 Encoder (I2C address 0x38)
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index 4d8c6fb..34f4599 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -53,7 +53,7 @@
volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
if ((uint)&gur->porpllsr != 0xe00e0000) {
- printf("immap size error %x\n",&gur->porpllsr);
+ printf("immap size error %lx\n",(ulong)&gur->porpllsr);
}
printf ("Board: ATUM8548\n");
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index f7f0013..48bc65d 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -189,7 +189,7 @@
if (rc > 0x0F)
return -1;
- printf ("0x%x\n", rc);
+ printf ("0x%lx\n", rc);
return 0;
}
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 354f2bf..2201bdd 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -335,7 +335,7 @@
if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
0x10000000) {
error_status = 2;
- printf("%s: failure at rs232_4, rxd status is %d "
+ printf("%s: failure at rs232_4, rxd status is %lu "
"(should be 1)\n", __FUNCTION__,
((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
0x10000000) >> 28);
@@ -350,7 +350,7 @@
if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
0x00000000) {
error_status = 2;
- printf("%s: failure at rs232_4, rxd status is %d "
+ printf("%s: failure at rs232_4, rxd status is %lu "
"(should be 0)\n", __FUNCTION__,
((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
0x10000000) >> 28);
@@ -366,7 +366,7 @@
if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
0x20000000) {
error_status = 3;
- printf("%s: failure at rs232_4, cts status is %d "
+ printf("%s: failure at rs232_4, cts status is %lu "
"(should be 1)\n", __FUNCTION__,
((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
0x20000000) >> 29);
@@ -381,7 +381,7 @@
if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
0x00000000) {
error_status = 3;
- printf("%s: failure at rs232_4, cts status is %d "
+ printf("%s: failure at rs232_4, cts status is %lu "
"(should be 0)\n", __FUNCTION__,
((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
0x20000000) >> 29);
diff --git a/board/cm5200/fwupdate.c b/board/cm5200/fwupdate.c
index 19aa94a..5a27191 100644
--- a/board/cm5200/fwupdate.c
+++ b/board/cm5200/fwupdate.c
@@ -63,7 +63,7 @@
if (!bcmd)
return;
- sprintf(ka, "%lx", LOAD_ADDR);
+ sprintf(ka, "%lx", (ulong)LOAD_ADDR);
/* prepare our bootargs */
rsargs = getenv("rs-args");
diff --git a/board/fads/flash.c b/board/fads/flash.c
index f0fb621..7cda3a4 100644
--- a/board/fads/flash.c
+++ b/board/fads/flash.c
@@ -90,7 +90,7 @@
default:
pd_size = 0;
or_am = 0xFFE00000;
- printf("## Unsupported flash detected by BCSR: 0x%08X\n", bcsr[2]);
+ printf("## Unsupported flash detected by BCSR: 0x%08lX\n", bcsr[2]);
}
total_size = 0;
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index f615b23..8c4b040 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -47,7 +47,7 @@
volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
if ((uint)&gur->porpllsr != 0xe00e0000) {
- printf("immap size error %x\n",&gur->porpllsr);
+ printf("immap size error %lx\n",(ulong)&gur->porpllsr);
}
printf ("Board: MPC8544DS\n");
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index 0bf21d5..ff1b892 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -99,8 +99,8 @@
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
- printf ("Board: MPC8610HPCD, System ID: 0x%02lx, "
- "System Version: 0x%02lx, FPGA Version: 0x%02lx\n",
+ printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
+ "System Version: 0x%02x, FPGA Version: 0x%02x\n",
in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
in8(PIXIS_BASE + PIXIS_PVER));
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index b30c6b1..db46953 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -47,8 +47,8 @@
int checkboard(void)
{
- printf ("Board: MPC8641HPCN, System ID: 0x%02lx, "
- "System Version: 0x%02lx, FPGA Version: 0x%02lx\n",
+ printf ("Board: MPC8641HPCN, System ID: 0x%02x, "
+ "System Version: 0x%02x, FPGA Version: 0x%02x\n",
in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
in8(PIXIS_BASE + PIXIS_PVER));
return 0;
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
index 5580c11..2ed66dd 100644
--- a/board/mcc200/auto_update.c
+++ b/board/mcc200/auto_update.c
@@ -491,7 +491,7 @@
aufile[i], sz, image_get_header_size ());
if (sz != ausize[i]) {
- printf ("%s: size %d read %d?\n", aufile[i], ausize[i], sz);
+ printf ("%s: size %ld read %ld?\n", aufile[i], ausize[i], sz);
continue;
}
diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c
index 7300a04..79eb04c 100644
--- a/board/mpc8540eval/flash.c
+++ b/board/mpc8540eval/flash.c
@@ -591,7 +591,7 @@
cnt -= FLASH_BLOCK_SIZE;
if (((count-cnt)>>10)>temp) {
temp=(count-cnt)>>10;
- printf("\r%d KB",temp);
+ printf("\r%lu KB",temp);
}
}
printf("\n");
@@ -699,7 +699,8 @@
}
}
if (csr & 0x4040) {
- printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr);
+ printf ("CSR indicates write error (%04lx) at %08lx\n",
+ csr, (ulong)addr);
flag = 1;
}
/* Clear Status Registers Command */
@@ -756,7 +757,8 @@
}
}
if (csr & 0x4040) {
- printf ("CSR indicates write error (%04x) at %08lx\n", csr, (ulong)addr);
+ printf ("CSR indicates write error (%04lx) at %08lx\n",
+ csr, (ulong)addr);
flag = 1;
}
/* Clear Status Registers Command */
diff --git a/board/netstal/common/nm_bsp.c b/board/netstal/common/nm_bsp.c
index 86f491b..e38b706 100644
--- a/board/netstal/common/nm_bsp.c
+++ b/board/netstal/common/nm_bsp.c
@@ -75,8 +75,8 @@
setenv("install", string);
sprintf(string, "setenv bootargs emac(0,0)c:%s/%s_sw_inst "
"e=${ipaddr} h=${serverip} f=0x1000; "
- "bootvx ${loadaddr}\0",
- board_name, board_name);
+ "bootvx ${loadaddr}%c",
+ board_name, board_name, 0);
setenv("boot_sw_inst", string);
}
}
@@ -108,10 +108,12 @@
gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff;
gd->bd->bi_enetaddr[5] = hcu_get_slot();
- sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
+ sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X%c",
gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
- gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
+ gd->bd->bi_enetaddr[4],
+ gd->bd->bi_enetaddr[5],
+ 0) ;
printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__,
ethaddr, serial);
setenv(DEFAULT_ETH_ADDR, ethaddr);
diff --git a/board/o2dnt/flash.c b/board/o2dnt/flash.c
index 037d287..349086f 100644
--- a/board/o2dnt/flash.c
+++ b/board/o2dnt/flash.c
@@ -411,7 +411,7 @@
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
+ printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
index 86d259f..9704901 100644
--- a/board/sandburst/metrobox/metrobox.c
+++ b/board/sandburst/metrobox/metrobox.c
@@ -270,7 +270,7 @@
}
printf ("OptoFPGA ID:\t0x%02X\tRev: 0x%02X\n", opto_id, opto_rev);
- printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id]);
+ printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, (char *)board_id_as[brd_id]);
/* Fix the ack in the bme 32 */
udelay(5000);
diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c
index cd7799b..cf21b21 100644
--- a/board/spc1920/hpi.c
+++ b/board/spc1920/hpi.c
@@ -234,7 +234,8 @@
HPI_HPIA_1 = addr1;
HPI_HPIA_2 = addr2;
- debugX(4, "writing from data=0x%x to 0x%x\n", data, (data+count));
+ debugX(4, "writing from data=0x%lx to 0x%lx\n",
+ (ulong)data, (ulong)(data+count));
for(i=0; i<count; i++) {
HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff);
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index 868ebd5..1ae24c4 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -67,14 +67,14 @@
puts ("Board: Total5100 ");
#endif
-/*
- * Retrieve FPGA Revision.
- */
-printf ("(FPGA %08X)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400));
+ /*
+ * Retrieve FPGA Revision.
+ */
+ printf ("(FPGA %08lX)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400));
-/*
- * Take all peripherals in power-up mode.
- */
+ /*
+ * Take all peripherals in power-up mode.
+ */
#if CONFIG_TOTAL5200_REV==2
*(vu_char *) (CFG_CPLD_BASE + 0x46) = 0x70;
#else
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 7472ca9..58039d4 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -478,7 +478,7 @@
}
set_attenuation(volume);
- printf("Play wave file at %#p with length %#x\n", addr, length);
+ printf("Play wave file at %lX with length %lX\n", addr, length);
rcode = i2s_play_wave(addr, length);
return rcode;
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index 29099f5..cde0296 100644
--- a/board/tqc/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
@@ -652,7 +652,7 @@
printf ("ethaddr: %s\n", hw->ethaddr);
printf ("FLASH : %x nr:%d\n", hw->flash, hw->flash_nr);
printf ("RAM : %x cs:%d\n", hw->ram, hw->ram_cs);
- printf ("CPU : %d\n", hw->cpunr);
+ printf ("CPU : %lu\n", hw->cpunr);
printf ("CAN : %d\n", hw->can);
if (hw->eeprom) printf ("EEprom : %x\n", hw->eeprom);
else printf ("No EEprom\n");
@@ -663,7 +663,7 @@
printf ("Bus %s mode.\n", (hw->Bus ? "60x" : "Single PQII"));
printf (" real : %s\n", (immr->im_siu_conf.sc_bcr & BCR_EBM ? \
"60x" : "Single PQII"));
- printf ("Option : %x\n", hw->option);
+ printf ("Option : %lx\n", hw->option);
printf ("%s Security Engine\n", (hw->SecEng ? "with" : "no"));
printf ("CPM Clk: %d\n", hw->cpmcl);
printf ("CPU Clk: %d\n", hw->cpucl);