commit 9ad93c0c968c8e6cd1273b73c44ec7262c616408
author Jagan Teki <jagan@amarulasolutions.com> Sun Aug 05 00:40:11 2018 +0530
committer Jagan Teki <jagan@amarulasolutions.com> Fri Sep 28 22:09:24 2018 +0530
tree fbf5ba73c82d359e5bb83ad25f12a0960a840f7c
parent b9d59d08a6c7362a9558dd5f67cdf85cc3a1b7c8

ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3

Update all A23/A33/r16 devicetree dtsi and dtsi files from
Linux-v4.18-rc3 with below commits.

A23:
commit bc3bd041fe766219a44688b182c260064007f0cc
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date:   Tue Apr 24 17:55:02 2018 +0200

    ARM: dts: sun8i: a23/a33: declare NAND pins

A33:
commit 88fe315d2c0a397ef42d7639addab0e021ae911d
Author: Maxime Ripard <maxime.ripard@bootlin.com>
Date:   Wed Apr 4 11:57:15 2018 +0200

    ARM: dts: sun8i: a33: Add the DSI-related nodes

r16:
commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date:   Tue Apr 24 17:55:03 2018 +0200

    ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support

Note:
- Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since
  sun8i-a23-a33.dtsi is added with Linux sync.
- Don't sync non U-Boot supported dts files
   sun8i-a23-ippo-q8h-v1.2.dts
   sun8i-a23-ippo-q8h-v5.dts
   sun8i-a33-et-q8-v1.6.dts
   sun8i-a33-ippo-q8h-v1.2.dts
   sun8i-r16-nintendo-nes-classic.dts
   sun8i-r16-nintendo-super-nes-classic.dts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

arch/arm/dts/sun8i-a33-olinuxino.dts

diff --git a/arch/arm/dts/sun8i-a33-olinuxino.dts b/arch/arm/dts/sun8i-a33-olinuxino.dts
index 9ea637e..a1a1eb6 100644
--- a/arch/arm/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/dts/sun8i-a33-olinuxino.dts
@@ -43,7 +43,6 @@
 
 /dts-v1/;
 #include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -62,8 +61,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_olinuxino>;
 
 		green {
 			label = "a33-olinuxino:green:usr";
@@ -72,17 +69,24 @@
 	};
 };
 
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
 	status = "okay";
 };
 
@@ -90,29 +94,6 @@
 	status = "okay";
 };
 
-&pio {
-	led_pin_olinuxino: led_pins@0 {
-		allwinner,pins = "PB7";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PB3";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
 &r_rsb {
 	status = "okay";
 
@@ -126,7 +107,15 @@
 	};
 };
 
-#include "axp22x.dtsi"
+#include "axp223.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
 
 &reg_aldo1 {
 	regulator-always-on;
@@ -201,6 +190,21 @@
 	vcc-lcd-supply = <&reg_dc1sw>;
 };
 
+&sound {
+	/* Board level jack widgets */
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	/* Board level routing. First 2 routes copied from SoC level */
+	simple-audio-card,routing =
+		"Left DAC", "AIF1 Slot 0 Left",
+		"Right DAC", "AIF1 Slot 0 Right",
+		"HP", "HPCOM",
+		"Headphone Jack", "HP",
+		"MIC1", "Microphone Jack",
+		"Microphone Jack", "MBIAS";
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;
@@ -217,8 +221,6 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
 	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;