Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE
and this makes it imposible to use CONFIG_VAL().
Rename it to resolve this problem.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h
index 9d06838..1826a6f 100644
--- a/include/configs/MCR3000.h
+++ b/include/configs/MCR3000.h
@@ -68,7 +68,7 @@
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE CONFIG_TEXT_BASE
/*
* For booting Linux, the board info and command line data
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index c2f4f2b..edf9b34 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -256,15 +256,15 @@
"netdev=" CONFIG_NETDEV "\0" \
"uboot=" CONFIG_UBOOTPATH "\0" \
"tftpflash=tftp $loadaddr $uboot;" \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "protect off " __stringify(CONFIG_TEXT_BASE) \
" +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "erase " __stringify(CONFIG_TEXT_BASE) \
" +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "cp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) \
" $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "protect on " __stringify(CONFIG_TEXT_BASE) \
" +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "cmp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) \
" $filesize\0" \
"fdtaddr=780000\0" \
"fdtfile=" CONFIG_FDTFILE "\0" \
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index eb7a835..0951931 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -367,15 +367,15 @@
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "protect off " __stringify(CONFIG_TEXT_BASE) \
" +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "erase " __stringify(CONFIG_TEXT_BASE) \
" +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "cp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) \
" $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "protect on " __stringify(CONFIG_TEXT_BASE) \
" +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
+ "cmp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) \
" $filesize\0" \
"consoledev=ttyS1\0" \
"ramdiskaddr=2000000\0" \
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 925720d..0ac7f16 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -12,13 +12,13 @@
#define __CONFIG_H
#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#endif
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/* Set 1M boot space */
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
@@ -347,7 +347,7 @@
"bank_intlv=cs0_cs1\0" \
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
"tftpflash=tftpboot $loadaddr $uboot && " \
"protect off $ubootaddr +$filesize && " \
"erase $ubootaddr +$filesize && " \
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index e0aa2b9..14f0ce60 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -86,7 +86,7 @@
#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
/* Set 1M boot space for PCIe boot */
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
@@ -469,7 +469,7 @@
"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
"bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
"netdev=eth0\0" \
"tftpflash=tftpboot $loadaddr $uboot && " \
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 918aabc..fad9594 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -465,7 +465,7 @@
"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
"tftpflash=tftpboot $loadaddr $uboot && " \
"protect off $ubootaddr +$filesize && " \
"erase $ubootaddr +$filesize && " \
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index e852fc4..285e5fc 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -55,7 +55,7 @@
#define CONFIG_SRIO_PCIE_BOOT_MASTER
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/* Set 1M boot space */
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
@@ -466,7 +466,7 @@
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
"tftpflash=tftpboot $loadaddr $uboot && " \
"protect off $ubootaddr +$filesize && " \
"erase $ubootaddr +$filesize && " \
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 68cf135..7fe499b 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -50,7 +50,7 @@
#define CONFIG_SRIO_PCIE_BOOT_MASTER
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/* Set 1M boot space */
-#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
@@ -421,7 +421,7 @@
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
"tftpflash=tftpboot $loadaddr $uboot && " \
"protect off $ubootaddr +$filesize && " \
"erase $ubootaddr +$filesize && " \
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index bba82f1..0dde24e 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -16,7 +16,7 @@
#ifdef CONFIG_RAMBOOT_PBL
#ifndef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#else
#define RESET_VECTOR_OFFSET 0x27FFC
@@ -419,7 +419,7 @@
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
"tftpflash=tftpboot $loadaddr $uboot && " \
"protect off $ubootaddr +$filesize && " \
"erase $ubootaddr +$filesize && " \
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 2dc6bd2..9cfae04 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -27,7 +27,7 @@
#define CONFIG_SYS_NAND_ECCBYTES 13
#define CONFIG_SYS_NAND_MAX_OOBFREE 2
#define CONFIG_SYS_NAND_MAX_ECCPOS 56
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
/* NAND block size is 128 KiB. Synchronize these values with
* corresponding Device Tree entries in Linux:
* MLO(SPL) 4 * NAND_BLOCK_SIZE = 512 KiB @ 0x000000
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index ef9335c..ca5815f 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -17,7 +17,7 @@
#include <asm/hardware.h>
/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * Warning: changing CONFIG_TEXT_BASE requires
* adapting the initial boot program.
* Since the linker has to swallow that define, we must use a pure
* hex number here!
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 266b2ae..f4161d7 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -205,7 +205,7 @@
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#endif
#endif
diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h
index 134a3ec..5aa720d 100644
--- a/include/configs/bcmstb.h
+++ b/include/configs/bcmstb.h
@@ -65,7 +65,7 @@
* : [~500 KiB in size, stripped]
* 0xc000 0000 Top of RAM
*
- * Setting gd->relocaddr to CONFIG_SYS_TEXT_BASE in dram_init_banksize
+ * Setting gd->relocaddr to CONFIG_TEXT_BASE in dram_init_banksize
* prevents U-Boot from relocating itself when it is run as an ELF
* program by the prior stage bootloader.
*
diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h
index ba0662f..898ca96 100644
--- a/include/configs/cobra5272.h
+++ b/include/configs/cobra5272.h
@@ -65,7 +65,7 @@
*
* Setting #if 0: u-boot will start from flash and relocate itself to RAM
*
- * Please do not forget to modify the setting of CONFIG_SYS_TEXT_BASE
+ * Please do not forget to modify the setting of CONFIG_TEXT_BASE
* in board/cobra5272/config.mk accordingly (#if 0: 0xffe00000; #if 1: 0x20000)
*
* ---
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
new file mode 100644
index 0000000..434da31
--- /dev/null
+++ b/include/configs/corenet_ds.h
@@ -0,0 +1,365 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
+ * Copyright 2020-2021 NXP
+ */
+
+/*
+ * Corenet DS style board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/stringify.h>
+
+#include "../board/freescale/common/ics307_clk.h"
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_TEXT_BASE
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#endif
+
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+/* Set 1M boot space */
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#endif
+
+/* High Level Configuration Options */
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#endif
+
+#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#endif
+
+#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
+
+/*
+ * Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
+#else
+#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR
+#endif
+#define CONFIG_SYS_L3_SIZE (1024 << 10)
+#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_DCSRBAR 0xf0000000
+#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
+#endif
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS1 0x51
+#define SPD_EEPROM_ADDRESS2 0x52
+#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
+#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
+
+/*
+ * Local Bus Definitions
+ */
+
+/* Set the local bus clock 1/8 of platform clock */
+#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8
+
+#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#endif
+
+#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
+#ifdef CONFIG_PHYS_64BIT
+#define PIXIS_BASE_PHYS 0xfffdf0000ull
+#else
+#define PIXIS_BASE_PHYS PIXIS_BASE
+#endif
+
+#define PIXIS_LBMAP_SWITCH 7
+#define PIXIS_LBMAP_MASK 0xf0
+#define PIXIS_LBMAP_SHIFT 4
+#define PIXIS_LBMAP_ALTBANK 0x40
+
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+/* Nand Flash */
+#ifdef CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_BASE 0xffa00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+
+#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE}
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+/* NAND flash config */
+#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V) /* valid */
+#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
+ | OR_FCM_PGS /* Large Page*/ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR)
+#endif /* CONFIG_NAND_FSL_ELBC */
+
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+
+#define CONFIG_HWCONFIG
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */
+
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
+#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
+#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
+
+/* I2C */
+
+/*
+ * RapidIO
+ */
+#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */
+
+#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
+#else
+#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000
+#endif
+#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
+
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
+
+/* slave core release by master*/
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/*
+ * SRIO_PCIE_BOOT - SLAVE
+ */
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
+#endif
+
+/*
+ * eSPI - Enhanced SPI
+ */
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1, direct to uli, tgtid 3, Base address 20000 */
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
+
+/* controller 2, Slot 2, tgtid 2, Base address 201000 */
+#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
+#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
+
+/* controller 3, Slot 1, tgtid 1, Base address 202000 */
+#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
+#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
+
+/* controller 4, Base address 203000 */
+#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
+#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
+
+/* Qman/Bman */
+#define CONFIG_SYS_BMAN_NUM_PORTALS 10
+#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
+#else
+#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000
+#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
+#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
+#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
+#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
+ CONFIG_SYS_BMAN_CENA_SIZE)
+#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
+#define CONFIG_SYS_QMAN_NUM_PORTALS 10
+#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull
+#else
+#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000
+#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
+#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
+#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
+#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
+ CONFIG_SYS_QMAN_CENA_SIZE)
+#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
+
+#define CONFIG_SYS_DPAA_FMAN
+#define CONFIG_SYS_DPAA_PME
+
+#ifdef CONFIG_FMAN_ENET
+#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c
+#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d
+#define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e
+#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f
+#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4
+
+#define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c
+#define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d
+#define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e
+#define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f
+#define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0
+
+#define CONFIG_SYS_TBIPA_VALUE 8
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+#ifdef CONFIG_MMC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ROOTPATH "/opt/nfsroot"
+#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
+
+#ifdef CONFIG_TARGET_P4080DS
+#define __USB_PHY_TYPE ulpi
+#else
+#define __USB_PHY_TYPE utmi
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
+ "bank_intlv=cs0_cs1;" \
+ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
+ "usb2:dr_mode=peripheral,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+ "netdev=eth0\0" \
+ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
+ "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot && " \
+ "protect off $ubootaddr +$filesize && " \
+ "erase $ubootaddr +$filesize && " \
+ "cp.b $loadaddr $ubootaddr $filesize && " \
+ "protect on $ubootaddr +$filesize && " \
+ "cmp.b $loadaddr $ubootaddr $filesize\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=p4080ds/ramdisk.uboot\0" \
+ "fdtaddr=1e00000\0" \
+ "fdtfile=p4080ds/p4080ds.dtb\0" \
+ "bdev=sda3\0"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 698da6b..5e43c21 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -17,7 +17,7 @@
#include <linux/sizes.h>
/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * Warning: changing CONFIG_TEXT_BASE requires
* adapting the initial boot program.
* Since the linker has to swallow that define, we must use a pure
* hex number here!
@@ -56,8 +56,8 @@
/* Defines for SPL */
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
#define CONFIG_SYS_NAND_ECCSIZE 256
#define CONFIG_SYS_NAND_ECCBYTES 3
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 7916ca8..66fb25b 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -79,11 +79,11 @@
* U-Boot Commands
*/
-/* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
+/* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_TEXT_BASE */
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
/* See common/spl/spl.c spl_set_header_raw_uboot() */
#define CONFIG_SYS_MONITOR_LEN CONFIG_SYS_NAND_U_BOOT_SIZE
diff --git a/include/configs/evb_ast2500.h b/include/configs/evb_ast2500.h
index b109a15..cd6cb06 100644
--- a/include/configs/evb_ast2500.h
+++ b/include/configs/evb_ast2500.h
@@ -11,7 +11,7 @@
#include <configs/aspeed-common.h>
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/* Misc */
#define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h
index 3c2155d..ecd05fe 100644
--- a/include/configs/evb_ast2600.h
+++ b/include/configs/evb_ast2600.h
@@ -8,7 +8,7 @@
#include <configs/aspeed-common.h>
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/* Misc */
#define STR_HELPER(s) #s
diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h
index 331e9ca..635d0f0 100644
--- a/include/configs/gardena-smart-gateway-at91sam.h
+++ b/include/configs/gardena-smart-gateway-at91sam.h
@@ -42,7 +42,7 @@
#define CONFIG_SYS_MCKR_CSS 0x1302
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
#endif
diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h
index d21a9b9..5f33470 100644
--- a/include/configs/gardena-smart-gateway-mt7688.h
+++ b/include/configs/gardena-smart-gateway-mt7688.h
@@ -16,7 +16,7 @@
/* SPL */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
/* Dummy value */
#define CONFIG_SYS_UBOOT_BASE 0
diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 5be6eb4..18c1e83 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -17,7 +17,7 @@
/* Physical Memory Map */
-/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
+/* CONFIG_TEXT_BASE needs to align with where ATF loads bl33.bin */
#define PHYS_SDRAM_1 0x00000000
diff --git a/include/configs/hikey960.h b/include/configs/hikey960.h
index ad07043..bdc9c47 100644
--- a/include/configs/hikey960.h
+++ b/include/configs/hikey960.h
@@ -11,7 +11,7 @@
/* Physical Memory Map */
-/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
+/* CONFIG_TEXT_BASE needs to align with where ATF loads bl33.bin */
#define PHYS_SDRAM_1 0x00000000
#define PHYS_SDRAM_1_SIZE 0xC0000000
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index a2d5080..fa73cab 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -128,7 +128,7 @@
#ifdef CONFIG_NAND_MXS
# define CONFIG_SYS_MAX_NAND_DEVICE 1
# define CONFIG_SYS_NAND_BASE 0x40000000
-# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
/* MTD device */
#endif
diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index 2913549..9ab3f8a 100644
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -118,7 +118,7 @@
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
/* USB Configs */
#ifdef CONFIG_CMD_USB
diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h
index f0586f7..3bf7970 100644
--- a/include/configs/kontron-sl-mx6ul.h
+++ b/include/configs/kontron-sl-mx6ul.h
@@ -22,7 +22,7 @@
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/* Board and environment settings */
#define CONFIG_MXC_UART_BASE UART4_BASE
diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h
index 2e077dd..a65decd 100644
--- a/include/configs/linkit-smart-7688.h
+++ b/include/configs/linkit-smart-7688.h
@@ -16,7 +16,7 @@
/* SPL */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
/* Dummy value */
#define CONFIG_SYS_UBOOT_BASE 0
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index d383b6c..37b8cd7 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -16,8 +16,8 @@
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SYS_NAND_U_BOOT_SIZE (400 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN 0x80000
#endif
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 1fb1d05..9f146c4 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -62,8 +62,8 @@
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
@@ -93,7 +93,7 @@
* CONFIG_SYS_FLASH_BASE has the final address (core view)
* CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
* CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
- * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
+ * CONFIG_TEXT_BASE is linked to 0x60000000 for booting
*/
#define CONFIG_SYS_FLASH_BASE 0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index e5fb111..26ce93a 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -66,8 +66,8 @@
/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN 0xa0000
#endif
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 1f54e51..b411efd 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -36,7 +36,7 @@
* CONFIG_SYS_FLASH_BASE has the final address (core view)
* CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
* CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
- * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
+ * CONFIG_TEXT_BASE is linked to 0x60000000 for booting
*/
#define CONFIG_SYS_FLASH_BASE 0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 21afe80..7d76170 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -69,7 +69,7 @@
* CONFIG_SYS_FLASH_BASE has the final address (core view)
* CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
* CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
- * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
+ * CONFIG_TEXT_BASE is linked to 0x30000000 for booting
*/
#define CONFIG_SYS_FLASH_BASE 0x580000000ULL
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index e170b5a..dc43ecb 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -61,7 +61,7 @@
* CONFIG_SYS_FLASH_BASE has the final address (core view)
* CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
* CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
- * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
+ * CONFIG_TEXT_BASE is linked to 0x30000000 for booting
*/
#define CONFIG_SYS_FLASH_BASE 0x580000000ULL
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 6b22967..cffcd9d 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -21,7 +21,7 @@
#include <asm/hardware.h>
/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * Warning: changing CONFIG_TEXT_BASE requires
* adapting the initial boot program.
* Since the linker has to swallow that define, we must use a pure
* hex number here!
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index dfae8ce..139b5bc 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -95,6 +95,6 @@
/* SPL part */
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
#endif /* __CONFIG_H */
diff --git a/include/configs/mt7620.h b/include/configs/mt7620.h
index 049d9a1..c6bee5f 100644
--- a/include/configs/mt7620.h
+++ b/include/configs/mt7620.h
@@ -16,7 +16,7 @@
/* SPL */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
/* Dummy value */
#define CONFIG_SYS_UBOOT_BASE 0
diff --git a/include/configs/mt7622.h b/include/configs/mt7622.h
index 78d79b7..f995399 100644
--- a/include/configs/mt7622.h
+++ b/include/configs/mt7622.h
@@ -14,10 +14,10 @@
#define CONFIG_SYS_NONCACHED_MEMORY SZ_1M
/* Uboot definition */
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/* SPL -> Uboot */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
/* DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h
index 3680c0f..317d1d2 100644
--- a/include/configs/mt7628.h
+++ b/include/configs/mt7628.h
@@ -28,7 +28,7 @@
/* SPL */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
/* Dummy value */
#define CONFIG_SYS_UBOOT_BASE 0
diff --git a/include/configs/mt7981.h b/include/configs/mt7981.h
index 01ad309..1f81b0b 100644
--- a/include/configs/mt7981.h
+++ b/include/configs/mt7981.h
@@ -14,10 +14,10 @@
#define CONFIG_SYS_NONCACHED_MEMORY SZ_1M
/* Uboot definition */
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/* SPL -> Uboot */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
/* DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
diff --git a/include/configs/mt7986.h b/include/configs/mt7986.h
index ccdd6ab..00e1c57 100644
--- a/include/configs/mt7986.h
+++ b/include/configs/mt7986.h
@@ -14,10 +14,10 @@
#define CONFIG_SYS_NONCACHED_MEMORY SZ_1M
/* Uboot definition */
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/* SPL -> Uboot */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
/* DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h
index 964c957..5ff5541 100644
--- a/include/configs/mt8512.h
+++ b/include/configs/mt8512.h
@@ -14,7 +14,7 @@
#define CONFIG_SYS_NONCACHED_MEMORY SZ_1M
/* Uboot definition */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
#define ENV_BOOT_READ_IMAGE \
"boot_rd_img=mmc dev 0" \
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 384a8f7..20e00ec 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -23,7 +23,7 @@
*/
/*
- * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h
+ * Custom CONFIG_TEXT_BASE can be done in <board>.h
*/
/* additions for new ARM relocation support */
diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h
index 2c430e8..25116c5 100644
--- a/include/configs/octeontx2_common.h
+++ b/include/configs/octeontx2_common.h
@@ -10,7 +10,7 @@
/** Maximum size of image supported for bootm (and bootable FIT images) */
/** Memory base address */
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_SDRAM_BASE CONFIG_TEXT_BASE
/** Stack starting address */
diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h
index e7a6bd4..373eb91 100644
--- a/include/configs/octeontx_common.h
+++ b/include/configs/octeontx_common.h
@@ -36,7 +36,7 @@
/** Maximum size of image supported for bootm (and bootable FIT images) */
/** Memory base address */
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_SDRAM_BASE CONFIG_TEXT_BASE
/** Stack starting address */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index d201c72..543a16f 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -87,8 +87,8 @@
#ifdef CONFIG_SDCARD
#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MMC_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MMC_U_BOOT_DST CONFIG_TEXT_BASE
+#define CONFIG_SYS_MMC_U_BOOT_START CONFIG_TEXT_BASE
#ifdef CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR
#define CONFIG_SYS_MMC_U_BOOT_OFFS (CONFIG_SPL_PAD_TO - CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA*512)
#else
@@ -96,8 +96,8 @@
#endif
#elif defined(CONFIG_SPIFLASH)
#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST CONFIG_TEXT_BASE
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START CONFIG_TEXT_BASE
#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS CONFIG_SPL_PAD_TO
#elif defined(CONFIG_MTD_RAW_NAND)
#ifdef CONFIG_TPL_BUILD
@@ -456,11 +456,11 @@
"loadaddr=1000000\0" \
"bootfile=uImage\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
+ "protect off " __stringify(CONFIG_TEXT_BASE) " +$filesize; " \
+ "erase " __stringify(CONFIG_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) " $filesize; " \
+ "protect on " __stringify(CONFIG_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " __stringify(CONFIG_TEXT_BASE) " $filesize\0" \
"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 4f5025d..cd8fe8b 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -24,7 +24,7 @@
/* Memory layout */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/*
* The board really has 256M. However, the VC (VideoCore co-processor) shares
* the RAM, and uses a configurable portion at the top. We tell U-Boot that a
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index fcb0fd5..5759794 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -63,7 +63,7 @@
#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
CONFIG_SYS_NAND_ECCSTEPS)
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
/*
* 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 1a3ac81..802ed07 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -30,7 +30,7 @@
#include <linux/sizes.h>
/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot
+ * Warning: changing CONFIG_TEXT_BASE requires adapting the initial boot
* program. Since the linker has to swallow that define, we must use a pure
* hex number here!
*/
@@ -96,8 +96,8 @@
#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
#define CONFIG_SYS_NAND_SIZE (SZ_256M)
#define CONFIG_SYS_NAND_ECCSIZE 256
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 4758e23..a29652d 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -22,7 +22,7 @@
#include <linux/sizes.h>
/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * Warning: changing CONFIG_TEXT_BASE requires
* adapting the initial boot program.
* Since the linker has to swallow that define, we must use a pure
* hex number here!
@@ -130,8 +130,8 @@
#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)
#define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
#define CONFIG_SYS_NAND_SIZE (256 * SZ_1M)
#define CONFIG_SYS_NAND_ECCSIZE 256
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 2d1f037..05536c3 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -123,7 +123,7 @@
/* General parts of the framework, required. */
#ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
#endif
#endif /* !CONFIG_NOR_BOOT */
diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h
index 6a7a083..b2572ca 100644
--- a/include/configs/vocore2.h
+++ b/include/configs/vocore2.h
@@ -16,7 +16,7 @@
/* SPL */
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE
/* Dummy value */
#define CONFIG_SYS_UBOOT_BASE 0
diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index 8d1eee2..f53ea3c 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -63,10 +63,10 @@
/* Use the framework and generic lib */
/* SPL will use serial */
/* SPL will load U-Boot from NAND offset 0x40000 */
-/* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
+/* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_TEXT_BASE */
#define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE
/*
* Include SoC specific configuration