Convert CONFIG_SYS_SRIO et al to Kconfig
This converts the following to Kconfig:
CONFIG_SRIO1
CONFIG_SRIO2
CONFIG_SRIO_PCIE_BOOT_MASTER
CONFIG_SYS_SRIO
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/README b/README
index b095937..bb35a89 100644
--- a/README
+++ b/README
@@ -1686,18 +1686,6 @@
- CONFIG_SYS_OR_TIMING_SDRAM:
SDRAM timing
-- CONFIG_SYS_SRIO:
- Chip has SRIO or not
-
-- CONFIG_SRIO1:
- Board has SRIO 1 port available
-
-- CONFIG_SRIO2:
- Board has SRIO 2 port available
-
-- CONFIG_SRIO_PCIE_BOOT_MASTER
- Board can support master function for Boot from SRIO and PCIE
-
- CONFIG_SYS_SRIOn_MEM_VIRT:
Virtual Address of SRIO port 'n' memory region
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c355a95..cf93a7b 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -44,6 +44,21 @@
bool "Lock some portion of L1 for initial ram stack"
depends on MPC83xx || MPC85xx
+config SYS_SRIO
+ bool "Serial RapidIO support"
+
+config SRIO1
+ bool "Board has SRIO 1 port available"
+ depends on SYS_SRIO
+
+config SRIO2
+ bool "Board has SRIO 2 port available"
+ depends on SYS_SRIO
+
+config SRIO_PCIE_BOOT_MASTER
+ bool "Board can support master function for Boot from SRIO and PCIE"
+ depends on SYS_SRIO
+
source "arch/powerpc/cpu/mpc83xx/Kconfig"
source "arch/powerpc/cpu/mpc85xx/Kconfig"
source "arch/powerpc/cpu/mpc8xx/Kconfig"
diff --git a/configs/MPC8548CDS_36BIT_defconfig b/configs/MPC8548CDS_36BIT_defconfig
index 85b055a..86a67d7 100644
--- a/configs/MPC8548CDS_36BIT_defconfig
+++ b/configs/MPC8548CDS_36BIT_defconfig
@@ -8,6 +8,8 @@
CONFIG_ENV_ADDR=0xFFF60000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_MPC8548CDS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/MPC8548CDS_defconfig b/configs/MPC8548CDS_defconfig
index 0d21b89..2ac4f26 100644
--- a/configs/MPC8548CDS_defconfig
+++ b/configs/MPC8548CDS_defconfig
@@ -8,6 +8,8 @@
CONFIG_ENV_ADDR=0xFFF60000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_MPC8548CDS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/MPC8548CDS_legacy_defconfig b/configs/MPC8548CDS_legacy_defconfig
index b01919e..faabd7b 100644
--- a/configs/MPC8548CDS_legacy_defconfig
+++ b/configs/MPC8548CDS_legacy_defconfig
@@ -8,6 +8,8 @@
CONFIG_ENV_ADDR=0xFFF60000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
# CONFIG_CMD_ERRATA is not set
CONFIG_TARGET_MPC8548CDS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig
index 0eec508..3d24b1a 100644
--- a/configs/P2041RDB_NAND_defconfig
+++ b/configs/P2041RDB_NAND_defconfig
@@ -6,6 +6,10 @@
CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_P2041RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig
index f9f4c31..cec55a1 100644
--- a/configs/P2041RDB_SDCARD_defconfig
+++ b/configs/P2041RDB_SDCARD_defconfig
@@ -6,6 +6,10 @@
CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_P2041RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig
index 6a97437..5fcf154 100644
--- a/configs/P2041RDB_SPIFLASH_defconfig
+++ b/configs/P2041RDB_SPIFLASH_defconfig
@@ -7,6 +7,10 @@
CONFIG_DEFAULT_DEVICE_TREE="p2041rdb"
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_P2041RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/P2041RDB_defconfig b/configs/P2041RDB_defconfig
index 1725a8a..ce198e2 100644
--- a/configs/P2041RDB_defconfig
+++ b/configs/P2041RDB_defconfig
@@ -7,6 +7,10 @@
CONFIG_ENV_ADDR=0xEFF20000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_P2041RDB=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080QDS_NAND_defconfig b/configs/T2080QDS_NAND_defconfig
index dd7473e..637842c 100644
--- a/configs/T2080QDS_NAND_defconfig
+++ b/configs/T2080QDS_NAND_defconfig
@@ -11,6 +11,10 @@
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_T2080QDS=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
diff --git a/configs/T2080QDS_SDCARD_defconfig b/configs/T2080QDS_SDCARD_defconfig
index 364aab5..35ab993 100644
--- a/configs/T2080QDS_SDCARD_defconfig
+++ b/configs/T2080QDS_SDCARD_defconfig
@@ -12,6 +12,10 @@
CONFIG_SPL=y
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_T2080QDS=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
diff --git a/configs/T2080QDS_SECURE_BOOT_defconfig b/configs/T2080QDS_SECURE_BOOT_defconfig
index c6710a0..93b02a5 100644
--- a/configs/T2080QDS_SECURE_BOOT_defconfig
+++ b/configs/T2080QDS_SECURE_BOOT_defconfig
@@ -4,6 +4,10 @@
CONFIG_DEFAULT_DEVICE_TREE="t2080qds"
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_T2080QDS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080QDS_SPIFLASH_defconfig b/configs/T2080QDS_SPIFLASH_defconfig
index a705542..7d25bbb 100644
--- a/configs/T2080QDS_SPIFLASH_defconfig
+++ b/configs/T2080QDS_SPIFLASH_defconfig
@@ -14,6 +14,10 @@
CONFIG_SPL_SPI=y
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_T2080QDS=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
diff --git a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
index d6d6ec0..2846f63 100644
--- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
+++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
@@ -5,6 +5,10 @@
CONFIG_ENV_ADDR=0xFFE20000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_T2080QDS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/configs/T2080QDS_defconfig b/configs/T2080QDS_defconfig
index 802213d..a7dc88c 100644
--- a/configs/T2080QDS_defconfig
+++ b/configs/T2080QDS_defconfig
@@ -6,6 +6,10 @@
CONFIG_ENV_ADDR=0xEFF20000
CONFIG_MPC85xx=y
CONFIG_SYS_INIT_RAM_LOCK=y
+CONFIG_SYS_SRIO=y
+CONFIG_SRIO1=y
+CONFIG_SRIO2=y
+CONFIG_SRIO_PCIE_BOOT_MASTER=y
CONFIG_TARGET_T2080QDS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 6a51149..eb75f8b 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -13,9 +13,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1 /* SRIO port 1 */
-
#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
#ifndef __ASSEMBLY__
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index d7e06d2..be8d09f 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -32,11 +32,6 @@
#define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1 /* SRIO port 1 */
-#define CONFIG_SRIO2 /* SRIO port 2 */
-#define CONFIG_SRIO_PCIE_BOOT_MASTER
-
#ifndef __ASSEMBLY__
#include <linux/stringify.h>
#endif
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 616387f..f9f9318 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -49,8 +49,6 @@
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
-/* PCIe Boot - Master */
-#define CONFIG_SRIO_PCIE_BOOT_MASTER
/*
* for slave u-boot IMAGE instored in master memory space,
* PHYS must be aligned based on the SIZE
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 8f56de4..acaad1b 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -14,11 +14,6 @@
#include <linux/stringify.h>
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
-#if defined(CONFIG_ARCH_T2080)
-#define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */
-#define CONFIG_SRIO1 /* SRIO port 1 */
-#define CONFIG_SRIO2 /* SRIO port 2 */
-#endif
/* High Level Configuration Options */
@@ -52,7 +47,6 @@
#endif /* CONFIG_RAMBOOT_PBL */
-#define CONFIG_SRIO_PCIE_BOOT_MASTER
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/* Set 1M boot space */
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index e9db4a2..7315afa 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -47,7 +47,6 @@
#endif /* CONFIG_RAMBOOT_PBL */
-#define CONFIG_SRIO_PCIE_BOOT_MASTER
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/* Set 1M boot space */
#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)