powerpc: P5040: Remove macro CONFIG_P5040

Replace CONFIG_P5040 with ARCH_P5040 in Kconfig and clean up
existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 808144e..9aef492 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -56,6 +56,7 @@
 config TARGET_P5040DS
 	bool "Support P5040DS"
 	select PHYS_64BIT
+	select ARCH_P5040
 
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
@@ -328,6 +329,9 @@
 config ARCH_P5020
 	bool
 
+config ARCH_P5040
+	bool
+
 source "board/freescale/b4860qds/Kconfig"
 source "board/freescale/bsc9131rdb/Kconfig"
 source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index edd365a..7c1dbb9 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -43,7 +43,7 @@
 obj-$(CONFIG_ARCH_P3041) += p3041_ids.o
 obj-$(CONFIG_ARCH_P4080) += p4080_ids.o
 obj-$(CONFIG_ARCH_P5020) += p5020_ids.o
-obj-$(CONFIG_PPC_P5040) += p5040_ids.o
+obj-$(CONFIG_ARCH_P5040) += p5040_ids.o
 obj-$(CONFIG_PPC_T4240) += t4240_ids.o
 obj-$(CONFIG_PPC_T4160) += t4240_ids.o
 obj-$(CONFIG_PPC_T4080) += t4240_ids.o
@@ -85,7 +85,7 @@
 obj-$(CONFIG_ARCH_P3041) += p3041_serdes.o
 obj-$(CONFIG_ARCH_P4080) += p4080_serdes.o
 obj-$(CONFIG_ARCH_P5020) += p5020_serdes.o
-obj-$(CONFIG_PPC_P5040) += p5040_serdes.o
+obj-$(CONFIG_ARCH_P5040) += p5040_serdes.o
 obj-$(CONFIG_PPC_T4240) += t4240_serdes.o
 obj-$(CONFIG_PPC_T4160) += t4240_serdes.o
 obj-$(CONFIG_PPC_T4080) += t4240_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 20d039f..45b6bdc 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -491,7 +491,7 @@
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	int cfg;
 	serdes_corenet_t *srds_regs;
-#ifdef CONFIG_PPC_P5040
+#ifdef CONFIG_ARCH_P5040
 	serdes_corenet_t *srds2_regs;
 #endif
 	int lane, bank, idx;
@@ -577,7 +577,7 @@
 		}
 	}
 
-#ifdef CONFIG_PPC_P5040
+#ifdef CONFIG_ARCH_P5040
 	/*
 	 * Lanes on bank 4 on P5040 are commented-out, but for some SERDES
 	 * protocols, these lanes are routed to SATA.  We use serdes_prtcl_map
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 496b845..23ee8f9 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -465,7 +465,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A006261
 #define CONFIG_SYS_FSL_A004447_SVR_REV	0x20
 
-#elif defined(CONFIG_PPC_P5040)
+#elif defined(CONFIG_ARCH_P5040)
 #define CONFIG_SYS_PPC64
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 47c3d98..7de554a 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -61,7 +61,7 @@
 #if defined(CONFIG_ARCH_P3041)	||	\
 	defined(CONFIG_ARCH_P4080) ||	\
 	defined(CONFIG_ARCH_P5020) ||	\
-	defined(CONFIG_PPC_P5040) ||	\
+	defined(CONFIG_ARCH_P5040) ||	\
 	defined(CONFIG_ARCH_P2041)
 	#define	CONFIG_FSL_TRUST_ARCH_v1
 #endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 759671a..b8b5379 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1866,7 +1866,7 @@
 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII		0x00100000
 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE		0x00180000
 #endif
-#if defined(CONFIG_PPC_P5040)
+#if defined(CONFIG_ARCH_P5040)
 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII        0x00000000
 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII          0x00800000
 #define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE         0x00c00000