net/phy: set led for rtl8211f phy

Initialize LCR rigister to configure
green LED for Link, yellow LED for Active.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 79452a8..bba48da 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -41,6 +41,7 @@
 
 #define MIIM_RTL8211F_PAGE_SELECT      0x1f
 #define MIIM_RTL8211F_TX_DELAY		0x100
+#define MIIM_RTL8211F_LCR		0x10
 
 /* RealTek RTL8211x */
 static int rtl8211x_config(struct phy_device *phydev)
@@ -79,6 +80,13 @@
 			  MIIM_RTL8211F_PAGE_SELECT, 0x0);
 	}
 
+	/* Set green LED for Link, yellow LED for Active */
+	phy_write(phydev, MDIO_DEVAD_NONE,
+		  MIIM_RTL8211F_PAGE_SELECT, 0xd04);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x617f);
+	phy_write(phydev, MDIO_DEVAD_NONE,
+		  MIIM_RTL8211F_PAGE_SELECT, 0x0);
+
 	genphy_config_aneg(phydev);
 
 	return 0;