pinctrl: mvebu: Enable support for the Armada 37xx pinctrl driver
To enable support for the Armada 37xx pinctrl driver, we need to
change the Kconfig symbol for the Armada 7k/8k pinctrl driver and its
dependencies to distinguish between both platforms and drivers.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
diff --git a/configs/mvebu_db-88f7040-nand_defconfig b/configs/mvebu_db-88f7040-nand_defconfig
index d86c18e..8d48cb6 100644
--- a/configs/mvebu_db-88f7040-nand_defconfig
+++ b/configs/mvebu_db-88f7040-nand_defconfig
@@ -7,7 +7,6 @@
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_BOARD_LATE_INIT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_EARLY_INIT_R=y
@@ -16,12 +15,12 @@
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_PART=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
-CONFIG_CMD_NAND=y
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
@@ -31,6 +30,7 @@
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_MVEBU_NAND_BOOT=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
@@ -45,18 +45,18 @@
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_XENON=y
+CONFIG_NAND_PXA3XX=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_MVEBU_NAND_BOOT=y
-CONFIG_NAND_PXA3XX=y
CONFIG_PHYLIB=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PCIE_DW_MVEBU=y
CONFIG_MVEBU_COMPHY_SUPPORT=y
CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_8K=y
# CONFIG_SPL_SERIAL_PRESENT is not set
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_BASE=0xf0512000