omap: add MMC and FAT support to SPL
- Add MMC raw and FAT mode boot support for OMAP
- Provide a means by which parameters passed by ROM-code
can be saved in u-boot.
- Save boot mode related information passed by OMAP4 ROM-code
and use it to determine where to load the u-boot from
- Assumes that the image has a mkimage header. Gets the
payload size and load address from this header. If the
header is not detected assume u-boot.bin as payload
Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c
index def9ced..091e3e0 100644
--- a/arch/arm/cpu/armv7/cpu.c
+++ b/arch/arm/cpu/armv7/cpu.c
@@ -37,6 +37,13 @@
#include <asm/cache.h>
#include <asm/armv7.h>
+void save_boot_params_default(u32 r0, u32 r1, u32 r2, u32 r3)
+{
+}
+
+void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
+ __attribute__((weak, alias("save_boot_params_default")));
+
int cleanup_before_linux(void)
{
/*
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index b201543..d177652 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -24,15 +24,27 @@
*/
#include <common.h>
#include <asm/u-boot.h>
+#include <asm/utils.h>
#include <asm/arch/sys_proto.h>
+#include <mmc.h>
+#include <fat.h>
#include <timestamp_autogenerated.h>
#include <version_autogenerated.h>
+#include <asm/omap_common.h>
+#include <asm/arch/mmc_host_def.h>
+#include <i2c.h>
+#include <image.h>
DECLARE_GLOBAL_DATA_PTR;
/* Define global data structure pointer to it*/
static gd_t gdata __attribute__ ((section(".data")));
static bd_t bdata __attribute__ ((section(".data")));
+static const char *image_name;
+static u8 image_os;
+static u32 image_load_addr;
+static u32 image_entry_point;
+static u32 image_size;
inline void hang(void)
{
@@ -53,10 +65,188 @@
relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
}
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ switch (omap_boot_device()) {
+ case BOOT_DEVICE_MMC1:
+ omap_mmc_init(0);
+ break;
+ case BOOT_DEVICE_MMC2:
+ omap_mmc_init(1);
+ break;
+ }
+ return 0;
+}
+#endif
+
+static void parse_image_header(const struct image_header *header)
+{
+ u32 header_size = sizeof(struct image_header);
+
+ if (__be32_to_cpu(header->ih_magic) == IH_MAGIC) {
+ image_size = __be32_to_cpu(header->ih_size) + header_size;
+ image_entry_point = __be32_to_cpu(header->ih_load);
+ /* Load including the header */
+ image_load_addr = image_entry_point - header_size;
+ image_os = header->ih_os;
+ image_name = (const char *)&header->ih_name;
+ debug("spl: payload image: %s load addr: 0x%x size: %d\n",
+ image_name, image_load_addr, image_size);
+ } else {
+ /* Signature not found - assume u-boot.bin */
+ printf("mkimage signature not found - ih_magic = %x\n",
+ header->ih_magic);
+ puts("Assuming u-boot.bin ..\n");
+ /* Let's assume U-Boot will not be more than 200 KB */
+ image_size = 200 * 1024;
+ image_entry_point = CONFIG_SYS_TEXT_BASE;
+ image_load_addr = CONFIG_SYS_TEXT_BASE;
+ image_os = IH_OS_U_BOOT;
+ image_name = "U-Boot";
+ }
+}
+
+static void mmc_load_image_raw(struct mmc *mmc)
+{
+ u32 image_size_sectors, err;
+ const struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ /* read image header to find the image size & load address */
+ err = mmc->block_dev.block_read(0,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1,
+ (void *)header);
+
+ if (err <= 0)
+ goto end;
+
+ parse_image_header(header);
+
+ /* convert size to sectors - round up */
+ image_size_sectors = (image_size + MMCSD_SECTOR_SIZE - 1) /
+ MMCSD_SECTOR_SIZE;
+
+ /* Read the header too to avoid extra memcpy */
+ err = mmc->block_dev.block_read(0,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
+ image_size_sectors, (void *)image_load_addr);
+
+end:
+ if (err <= 0) {
+ printf("spl: mmc blk read err - %d\n", err);
+ hang();
+ }
+}
+
+static void mmc_load_image_fat(struct mmc *mmc)
+{
+ s32 err;
+ struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ err = fat_register_device(&mmc->block_dev,
+ CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
+ if (err) {
+ printf("spl: fat register err - %d\n", err);
+ hang();
+ }
+
+ err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
+ (u8 *)header, sizeof(struct image_header));
+ if (err <= 0)
+ goto end;
+
+ parse_image_header(header);
+
+ err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
+ (u8 *)image_load_addr, 0);
+
+end:
+ if (err <= 0) {
+ printf("spl: error reading image %s, err - %d\n",
+ CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err);
+ hang();
+ }
+}
+
+static void mmc_load_image(void)
+{
+ struct mmc *mmc;
+ int err;
+ u32 boot_mode;
+
+ mmc_initialize(gd->bd);
+ /* We register only one device. So, the dev id is always 0 */
+ mmc = find_mmc_device(0);
+ if (!mmc) {
+ puts("spl: mmc device not found!!\n");
+ hang();
+ }
+
+ err = mmc_init(mmc);
+ if (err) {
+ printf("spl: mmc init failed: err - %d\n", err);
+ hang();
+ }
+
+ boot_mode = omap_boot_mode();
+ if (boot_mode == MMCSD_MODE_RAW) {
+ debug("boot mode - RAW\n");
+ mmc_load_image_raw(mmc);
+ } else if (boot_mode == MMCSD_MODE_FAT) {
+ debug("boot mode - FAT\n");
+ mmc_load_image_fat(mmc);
+ } else {
+ puts("spl: wrong MMC boot mode\n");
+ hang();
+ }
+}
+
+void jump_to_image_no_args(void)
+{
+ typedef void (*image_entry_noargs_t)(void)__attribute__ ((noreturn));
+ image_entry_noargs_t image_entry =
+ (image_entry_noargs_t) image_entry_point;
+
+ image_entry();
+}
+
+void jump_to_image_no_args(void) __attribute__ ((noreturn));
void board_init_r(gd_t *id, ulong dummy)
{
- for (;;)
- ;
+ u32 boot_device;
+ debug(">>spl:board_init_r()\n");
+
+ timer_init();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ boot_device = omap_boot_device();
+ debug("boot device - %d\n", boot_device);
+ switch (boot_device) {
+ case BOOT_DEVICE_MMC1:
+ case BOOT_DEVICE_MMC2:
+ mmc_load_image();
+ break;
+ default:
+ printf("SPL: Un-supported Boot Device - %d!!!\n", boot_device);
+ hang();
+ break;
+ }
+
+ switch (image_os) {
+ case IH_OS_U_BOOT:
+ debug("Jumping to U-Boot\n");
+ jump_to_image_no_args();
+ break;
+ default:
+ puts("Unsupported OS image.. Jumping nevertheless..\n");
+ jump_to_image_no_args();
+ }
}
void preloader_console_init(void)
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 54dd509..2e5739a 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -39,6 +39,27 @@
u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV;
+#ifdef CONFIG_SPL_BUILD
+/*
+ * We use static variables because global data is not ready yet.
+ * Initialized data is available in SPL right from the beginning.
+ * We would not typically need to save these parameters in regular
+ * U-Boot. This is needed only in SPL at the moment.
+ */
+u32 omap4_boot_device = BOOT_DEVICE_MMC1;
+u32 omap4_boot_mode = MMCSD_MODE_FAT;
+
+u32 omap_boot_device(void)
+{
+ return omap4_boot_device;
+}
+
+u32 omap_boot_mode(void)
+{
+ return omap4_boot_mode;
+}
+#endif
+
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
{
int i;
diff --git a/arch/arm/cpu/armv7/omap4/lowlevel_init.S b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
index 6abfbba..91525ec 100644
--- a/arch/arm/cpu/armv7/omap4/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap4/lowlevel_init.S
@@ -27,6 +27,37 @@
*/
#include <asm/arch/omap4.h>
+#ifdef CONFIG_SPL_BUILD
+.global save_boot_params
+save_boot_params:
+ /*
+ * See if the rom code passed pointer is valid:
+ * It is not valid if it is not in non-secure SRAM
+ * This may happen if you are booting with the help of
+ * debugger
+ */
+ ldr r2, =NON_SECURE_SRAM_START
+ cmp r2, r0
+ bgt 1f
+ ldr r2, =NON_SECURE_SRAM_END
+ cmp r2, r0
+ blt 1f
+
+ /* Store the boot device in omap4_boot_device */
+ ldr r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device
+ and r2, #BOOT_DEVICE_MASK
+ ldr r3, =omap4_boot_device
+ str r2, [r3] @ omap4_boot_device <- r1
+
+ /* Store the boot mode (raw/FAT) in omap4_boot_mode */
+ ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr
+ ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr
+ ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode
+ ldr r3, =omap4_boot_mode
+ str r2, [r3]
+1:
+ bx lr
+#endif
.globl lowlevel_init
lowlevel_init:
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 02a2535..db8e9d2 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -134,6 +134,7 @@
*/
reset:
+ bl save_boot_params
/*
* set the cpu to SVC32 mode
*/
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index a8dbedb..563544f 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -144,4 +144,12 @@
#define OMAP4430_ES2_2 0x44300220
#define OMAP4430_ES2_3 0x44300230
+/* ROM code defines */
+/* Boot device */
+#define BOOT_DEVICE_MASK 0xFF
+#define BOOT_DEVICE_OFFSET 0x8
+#define DEV_DESC_PTR_OFFSET 0x4
+#define DEV_DATA_PTR_OFFSET 0x18
+#define BOOT_MODE_OFFSET 0x8
+
#endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 69d53d2..d3cb857 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -36,4 +36,21 @@
void preloader_console_init(void);
+/* Boot device */
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_XIPWAIT 2
+#define BOOT_DEVICE_NAND 3
+#define BOOT_DEVICE_ONE_NAND 4
+#define BOOT_DEVICE_MMC1 5
+#define BOOT_DEVICE_MMC2 6
+
+/* Boot type */
+#define MMCSD_MODE_UNDEFINED 0
+#define MMCSD_MODE_RAW 1
+#define MMCSD_MODE_FAT 2
+
+u32 omap_boot_device(void);
+u32 omap_boot_mode(void);
+
#endif /* _OMAP_COMMON_H_ */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 1112362..f6f283a 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -252,6 +252,11 @@
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 6a6be9e..346763d 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -258,6 +258,11 @@
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT