ddr: altera: Clean up rw_mgr_*_vfifo() part 2
Pluck out all this VFIFO value counting, which turns out to be
completely unused. Thus, remove it to simplify the code.
Signed-off-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 3d0dc59..50a5b8e 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -1289,38 +1289,35 @@
/**
* rw_mgr_incr_vfifo() - Increase VFIFO value
* @grp: Read/Write group
- * @v: VFIFO value
*
* Increase VFIFO value.
*/
-static void rw_mgr_incr_vfifo(const u32 grp, u32 *v)
+static void rw_mgr_incr_vfifo(const u32 grp)
{
writel(grp, &phy_mgr_cmd->inc_vfifo_hard_phy);
- (*v)++;
}
/**
* rw_mgr_decr_vfifo() - Decrease VFIFO value
* @grp: Read/Write group
- * @v: VFIFO value
*
* Decrease VFIFO value.
*/
-static void rw_mgr_decr_vfifo(const u32 grp, u32 *v)
+static void rw_mgr_decr_vfifo(const u32 grp)
{
u32 i;
for (i = 0; i < VFIFO_SIZE - 1; i++)
- rw_mgr_incr_vfifo(grp, v);
+ rw_mgr_incr_vfifo(grp);
}
static int find_vfifo_read(uint32_t grp, uint32_t *bit_chk)
{
- uint32_t v;
+ uint32_t v;
uint32_t fail_cnt = 0;
uint32_t test_status;
- for (v = 0; v < VFIFO_SIZE; ) {
+ for (v = 0; v < VFIFO_SIZE; v++) {
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: vfifo %u\n",
__func__, __LINE__, v);
test_status = rw_mgr_mem_calibrate_read_test_all_ranks
@@ -1333,7 +1330,7 @@
}
/* fiddle with FIFO */
- rw_mgr_incr_vfifo(grp, &v);
+ rw_mgr_incr_vfifo(grp);
}
if (v >= VFIFO_SIZE) {
@@ -1350,14 +1347,13 @@
* sdr_find_phase() - Find DQS enable phase
* @working: If 1, look for working phase, if 0, look for non-working phase
* @grp: Read/Write group
- * @v: VFIFO value
* @work: Working window position
* @i: Iterator
* @p: DQS Phase Iterator
*
* Find working or non-working DQS enable phase setting.
*/
-static int sdr_find_phase(int working, const u32 grp, u32 *v, u32 *work,
+static int sdr_find_phase(int working, const u32 grp, u32 *work,
u32 *i, u32 *p)
{
u32 ret, bit_chk;
@@ -1383,7 +1379,7 @@
if (*p > IO_DQS_EN_PHASE_MAX) {
/* Fiddle with FIFO. */
- rw_mgr_incr_vfifo(grp, v);
+ rw_mgr_incr_vfifo(grp);
if (!working)
*p = 0;
}
@@ -1396,14 +1392,13 @@
* sdr_working_phase() - Find working DQS enable phase
* @grp: Read/Write group
* @work_bgn: Working window start position
- * @v: VFIFO value
* @d: dtaps output value
* @p: DQS Phase Iterator
* @i: Iterator
*
* Find working DQS enable phase setting.
*/
-static int sdr_working_phase(const u32 grp, u32 *work_bgn, u32 *v, u32 *d,
+static int sdr_working_phase(const u32 grp, u32 *work_bgn, u32 *d,
u32 *p, u32 *i)
{
const u32 dtaps_per_ptap = IO_DELAY_PER_OPA_TAP /
@@ -1415,7 +1410,7 @@
for (*d = 0; *d <= dtaps_per_ptap; (*d)++) {
*i = 0;
scc_mgr_set_dqs_en_delay_all_ranks(grp, *d);
- ret = sdr_find_phase(1, grp, v, work_bgn, i, p);
+ ret = sdr_find_phase(1, grp, work_bgn, i, p);
if (!ret)
return 0;
*work_bgn += IO_DELAY_PER_DQS_EN_DCHAIN_TAP;
@@ -1431,12 +1426,11 @@
* sdr_backup_phase() - Find DQS enable backup phase
* @grp: Read/Write group
* @work_bgn: Working window start position
- * @v: VFIFO value
* @p: DQS Phase Iterator
*
* Find DQS enable backup phase setting.
*/
-static void sdr_backup_phase(const u32 grp, u32 *work_bgn, u32 *v, u32 *p)
+static void sdr_backup_phase(const u32 grp, u32 *work_bgn, u32 *p)
{
u32 tmp_delay, bit_chk, d;
int ret;
@@ -1444,7 +1438,7 @@
/* Special case code for backing up a phase */
if (*p == 0) {
*p = IO_DQS_EN_PHASE_MAX;
- rw_mgr_decr_vfifo(grp, v);
+ rw_mgr_decr_vfifo(grp);
} else {
(*p)--;
}
@@ -1468,7 +1462,7 @@
(*p)++;
if (*p > IO_DQS_EN_PHASE_MAX) {
*p = 0;
- rw_mgr_incr_vfifo(grp, v);
+ rw_mgr_incr_vfifo(grp);
}
scc_mgr_set_dqs_en_delay_all_ranks(grp, 0);
@@ -1478,14 +1472,12 @@
* sdr_nonworking_phase() - Find non-working DQS enable phase
* @grp: Read/Write group
* @work_end: Working window end position
- * @v: VFIFO value
* @p: DQS Phase Iterator
* @i: Iterator
*
* Find non-working DQS enable phase setting.
*/
-static int sdr_nonworking_phase(const u32 grp, u32 *work_end, u32 *v,
- u32 *p, u32 *i)
+static int sdr_nonworking_phase(const u32 grp, u32 *work_end, u32 *p, u32 *i)
{
int ret;
@@ -1494,10 +1486,10 @@
if (*p > IO_DQS_EN_PHASE_MAX) {
/* Fiddle with FIFO. */
*p = 0;
- rw_mgr_incr_vfifo(grp, v);
+ rw_mgr_incr_vfifo(grp);
}
- ret = sdr_find_phase(0, grp, v, work_end, i, p);
+ ret = sdr_find_phase(0, grp, work_end, i, p);
if (ret) {
/* Cannot see edge of failing read. */
debug_cond(DLEVEL == 2, "%s:%d: end: failed\n",
@@ -1512,14 +1504,13 @@
* @grp: Read/Write group
* @work_bgn: First working settings
* @work_end: Last working settings
- * @val: VFIFO value
*
* Find center of the working DQS enable window.
*/
static int sdr_find_window_center(const u32 grp, const u32 work_bgn,
- const u32 work_end, const u32 val)
+ const u32 work_end)
{
- u32 bit_chk, work_mid, v = val;
+ u32 bit_chk, work_mid;
int tmp_delay = 0;
int i, p, d;
@@ -1556,19 +1547,18 @@
* because the largest possible margin in 1 VFIFO cycle.
*/
for (i = 0; i < VFIFO_SIZE; i++) {
- debug_cond(DLEVEL == 2, "find_dqs_en_phase: center: vfifo=%u\n",
- v);
+ debug_cond(DLEVEL == 2, "find_dqs_en_phase: center\n");
if (rw_mgr_mem_calibrate_read_test_all_ranks(grp, 1,
PASS_ONE_BIT,
&bit_chk, 0)) {
debug_cond(DLEVEL == 2,
- "%s:%d center: found: vfifo=%u ptap=%u dtap=%u\n",
- __func__, __LINE__, v, p, d);
+ "%s:%d center: found: ptap=%u dtap=%u\n",
+ __func__, __LINE__, p, d);
return 0;
}
/* Fiddle with FIFO. */
- rw_mgr_incr_vfifo(grp, &v);
+ rw_mgr_incr_vfifo(grp);
}
debug_cond(DLEVEL == 2, "%s:%d center: failed.\n",
@@ -1579,7 +1569,7 @@
/* find a good dqs enable to use */
static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
{
- uint32_t v, d, p, i;
+ uint32_t d, p, i;
uint32_t bit_chk;
uint32_t dtaps_per_ptap;
uint32_t work_bgn, work_end;
@@ -1598,12 +1588,12 @@
/* ********************************************************* */
/* * Step 1 : First push vfifo until we get a failing read * */
- v = find_vfifo_read(grp, &bit_chk);
+ find_vfifo_read(grp, &bit_chk);
/* ******************************************************** */
/* * step 2: find first working phase, increment in ptaps * */
work_bgn = 0;
- if (sdr_working_phase(grp, &work_bgn, &v, &d, &p, &i))
+ if (sdr_working_phase(grp, &work_bgn, &d, &p, &i))
return 0;
work_end = work_bgn;
@@ -1618,12 +1608,12 @@
/* * step 3a: if we have room, back off by one and
increment in dtaps * */
- sdr_backup_phase(grp, &work_bgn, &v, &p);
+ sdr_backup_phase(grp, &work_bgn, &p);
/* ********************************************************* */
/* * step 4a: go forward from working phase to non working
phase, increment in ptaps * */
- if (sdr_nonworking_phase(grp, &work_end, &v, &p, &i))
+ if (sdr_nonworking_phase(grp, &work_end, &p, &i))
return 0;
/* ********************************************************* */
@@ -1632,7 +1622,7 @@
/* Special case code for backing up a phase */
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
- rw_mgr_decr_vfifo(grp, &v);
+ rw_mgr_decr_vfifo(grp);
} else {
p = p - 1;
}
@@ -1644,16 +1634,16 @@
the if/else loop to share code */
d = 0;
- debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: v/p: \
- vfifo=%u ptap=%u\n", __func__, __LINE__,
- v, p);
+ debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: p: \
+ ptap=%u\n", __func__, __LINE__,
+ p);
} else {
/* ******************************************************* */
/* * step 3-5b: Find the right edge of the window using
delay taps * */
- debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase:vfifo=%u \
+ debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: \
ptap=%u dtap=%u bgn=%u\n", __func__, __LINE__,
- v, p, d, work_bgn);
+ p, d, work_bgn);
work_end = work_bgn;
}
@@ -1676,9 +1666,9 @@
if (d != 0)
work_end -= IO_DELAY_PER_DQS_EN_DCHAIN_TAP;
- debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: v/p/d: vfifo=%u \
+ debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: p/d: \
ptap=%u dtap=%u end=%u\n", __func__, __LINE__,
- v, p, d-1, work_end);
+ p, d-1, work_end);
if (work_end < work_bgn) {
/* nil range */
@@ -1703,15 +1693,15 @@
/* Special case code for backing up a phase */
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
- rw_mgr_decr_vfifo(grp, &v);
+ rw_mgr_decr_vfifo(grp);
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: backedup \
- cycle/phase: v=%u p=%u\n", __func__, __LINE__,
- v, p);
+ cycle/phase: p=%u\n", __func__, __LINE__,
+ p);
} else {
p = p - 1;
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: backedup \
- phase only: v=%u p=%u", __func__, __LINE__,
- v, p);
+ phase only: p=%u", __func__, __LINE__,
+ p);
}
scc_mgr_set_dqs_en_phase_all_ranks(grp, p);
@@ -1778,7 +1768,7 @@
/* ******************************************** */
/* * step 6: Find the centre of the window * */
- if (sdr_find_window_centre(grp, work_bgn, work_end, v))
+ if (sdr_find_window_centre(grp, work_bgn, work_end))
return 0; /* FIXME: Old code, return 0 means failure :-( */
return 1;