Implement SC520 timers
Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile
index f72cd6e..e98bd3d 100644
--- a/cpu/i386/Makefile
+++ b/cpu/i386/Makefile
@@ -29,7 +29,7 @@
LIB = $(obj)lib$(CPU).a
START = start.o start16.o resetvec.o
-COBJS = serial.o interrupts.o exceptions.o cpu.o timer.o
+COBJS = serial.o interrupts.o exceptions.o cpu.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/i386/sc520/sc520_timer.c b/cpu/i386/sc520/sc520_timer.c
index 7578511..2cb8656 100644
--- a/cpu/i386/sc520/sc520_timer.c
+++ b/cpu/i386/sc520/sc520_timer.c
@@ -27,47 +27,56 @@
#include <asm/interrupt.h>
#include <asm/ic/sc520.h>
-void reset_timer(void)
+void sc520_timer_isr(void)
{
- write_mmcr_word(SC520_GPTMR0CNT, 0);
- write_mmcr_word(SC520_GPTMR0CTL, 0x6001);
-
+ /* Ack the GP Timer Interrupt */
+ write_mmcr_byte (SC520_GPTMRSTA, 0x02);
}
-ulong get_timer(ulong base)
+int timer_init(void)
{
- /* fixme: 30 or 33 */
- return read_mmcr_word(SC520_GPTMR0CNT) / 33;
-}
+ /* Map GP Timer 1 to Master PIC IR0 */
+ write_mmcr_byte (SC520_GPTMR1MAP, 0x01);
-void set_timer(ulong t)
-{
- /* FixMe: use two cascade coupled timers */
- write_mmcr_word(SC520_GPTMR0CTL, 0x4001);
- write_mmcr_word(SC520_GPTMR0CNT, t*33);
- write_mmcr_word(SC520_GPTMR0CTL, 0x6001);
-}
+ /* Disable GP Timers 1 & 2 - Allow configuration writes */
+ write_mmcr_word (SC520_GPTMR1CTL, 0x4000);
+ write_mmcr_word (SC520_GPTMR2CTL, 0x4000);
+ /* Reset GP Timers 1 & 2 */
+ write_mmcr_word (SC520_GPTMR1CNT, 0x0000);
+ write_mmcr_word (SC520_GPTMR2CNT, 0x0000);
+
+ /* Setup GP Timer 2 as a 100kHz (10us) prescaler */
+ write_mmcr_word (SC520_GPTMR2MAXCMPA, 83);
+ write_mmcr_word (SC520_GPTMR2CTL, 0xc001);
+
+ /* Setup GP Timer 1 as a 1000 Hz (1ms) interrupt generator */
+ write_mmcr_word (SC520_GPTMR1MAXCMPA, 100);
+ write_mmcr_word (SC520_GPTMR1CTL, 0xe009);
+
+ /* Clear the GP Timers status register */
+ write_mmcr_byte (SC520_GPTMRSTA, 0x07);
+
+ /* Register the SC520 specific timer interrupt handler */
+ register_timer_isr (sc520_timer_isr);
+
+ /* Install interrupt handler for GP Timer 1 */
+ irq_install_handler (0, timer_isr, NULL);
+ unmask_irq (0);
+
+ return 0;
+}
void udelay(unsigned long usec)
{
- int m=0;
+ int m = 0;
long u;
- read_mmcr_word(SC520_SWTMRMILLI);
- read_mmcr_word(SC520_SWTMRMICRO);
+ read_mmcr_word (SC520_SWTMRMILLI);
+ read_mmcr_word (SC520_SWTMRMICRO);
-#if 0
- /* do not enable this line, udelay is used in the serial driver -> recursion */
- printf("udelay: %ld m.u %d.%d tm.tu %d.%d\n", usec, m, u, tm, tu);
-#endif
- while (1) {
-
- m += read_mmcr_word(SC520_SWTMRMILLI);
- u = read_mmcr_word(SC520_SWTMRMICRO) + (m * 1000);
-
- if (usec <= u) {
- break;
- }
- }
+ do {
+ m += read_mmcr_word (SC520_SWTMRMILLI);
+ u = read_mmcr_word (SC520_SWTMRMICRO) + (m * 1000);
+ } while (u < usec);
}
diff --git a/cpu/i386/timer.c b/cpu/i386/timer.c
deleted file mode 100644
index 79039c2..0000000
--- a/cpu/i386/timer.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/i8254.h>
-#include <asm/ibmpc.h>
-
-
-static volatile unsigned long system_ticks;
-static int timer_init_done =0;
-
-static void timer_isr(void *unused)
-{
- system_ticks++;
-}
-
-unsigned long get_system_ticks(void)
-{
- return system_ticks;
-}
-
-#define TIMER0_VALUE 0x04aa /* 1kHz 1.9318MHz / 1000 */
-#define TIMER2_VALUE 0x0a8e /* 440Hz */
-
-int timer_init(void)
-{
- system_ticks = 0;
-
- irq_install_handler(0, timer_isr, NULL);
-
- /* initialize timer 0 and 2
- *
- * Timer 0 is used to increment system_tick 1000 times/sec
- * Timer 1 was used for DRAM refresh in early PC's
- * Timer 2 is used to drive the speaker
- * (to stasrt a beep: write 3 to port 0x61,
- * to stop it again: write 0)
- */
-
- outb(PIT_CMD_CTR0|PIT_CMD_BOTH|PIT_CMD_MODE2, PIT_BASE + PIT_COMMAND);
- outb(TIMER0_VALUE&0xff, PIT_BASE + PIT_T0);
- outb(TIMER0_VALUE>>8, PIT_BASE + PIT_T0);
-
- outb(PIT_CMD_CTR2|PIT_CMD_BOTH|PIT_CMD_MODE3, PIT_BASE + PIT_COMMAND);
- outb(TIMER2_VALUE&0xff, PIT_BASE + PIT_T2);
- outb(TIMER2_VALUE>>8, PIT_BASE + PIT_T2);
-
- timer_init_done = 1;
-
- return 0;
-}
-
-
-#ifdef CONFIG_SYS_GENERIC_TIMER
-
-/* the unit for these is CONFIG_SYS_HZ */
-
-/* FixMe: implement these */
-void reset_timer (void)
-{
- system_ticks = 0;
-}
-
-ulong get_timer (ulong base)
-{
- return (system_ticks - base);
-}
-
-void set_timer (ulong t)
-{
- system_ticks = t;
-}
-
-static u16 read_pit(void)
-{
- u8 low;
- outb(PIT_CMD_LATCH, PIT_BASE + PIT_COMMAND);
- low = inb(PIT_BASE + PIT_T0);
- return ((inb(PIT_BASE + PIT_T0) << 8) | low);
-}
-
-/* this is not very exact */
-void udelay (unsigned long usec)
-{
- int counter;
- int wraps;
-
- if (!timer_init_done) {
- return;
- }
- counter = read_pit();
- wraps = usec/1000;
- usec = usec%1000;
-
- usec*=1194;
- usec/=1000;
- usec+=counter;
- if (usec > 1194) {
- usec-=1194;
- wraps++;
- }
-
- while (1) {
- int new_count = read_pit();
-
- if (((new_count < usec) && !wraps) || wraps < 0) {
- break;
- }
-
- if (new_count > counter) {
- wraps--;
- }
- counter = new_count;
- }
-
-}
-
-#if 0
-/* this is a version with debug output */
-void _udelay (unsigned long usec)
-{
- int counter;
- int wraps;
-
- int usec1, usec2, usec3;
- int wraps1, wraps2, wraps3, wraps4;
- int ctr1, ctr2, ctr3, nct1, nct2;
- int i;
- usec1=usec;
- if (!timer_init_done) {
- return;
- }
- counter = read_pit();
- ctr1 = counter;
- wraps = usec/1000;
- usec = usec%1000;
-
- usec2 = usec;
- wraps1 = wraps;
-
- usec*=1194;
- usec/=1000;
- usec+=counter;
- if (usec > 1194) {
- usec-=1194;
- wraps++;
- }
-
- usec3 = usec;
- wraps2 = wraps;
-
- ctr2 = wraps3 = nct1 = 4711;
- ctr3 = wraps4 = nct2 = 4711;
- i=0;
- while (1) {
- int new_count = read_pit();
- i++;
- if ((new_count < usec && !wraps) || wraps < 0) {
- break;
- }
-
- if (new_count > counter) {
- wraps--;
- }
- if (ctr2==4711) {
- ctr2 = counter;
- wraps3 = wraps;
- nct1 = new_count;
- } else {
- ctr3 = counter;
- wraps4 = wraps;
- nct2 = new_count;
- }
-
- counter = new_count;
- }
-
- printf("udelay(%d)\n", usec1);
- printf("counter %d\n", ctr1);
- printf("1: wraps %d, usec %d\n", wraps1, usec2);
- printf("2: wraps %d, usec %d\n", wraps2, usec3);
- printf("new_count[0] %d counter %d wraps %d\n", nct1, ctr2, wraps3);
- printf("new_count[%d] %d counter %d wraps %d\n", i, nct2, ctr3, wraps4);
-
- printf("%d %d %d %d %d\n",
- read_pit(), read_pit(), read_pit(),
- read_pit(), read_pit());
-}
-#endif
-#endif