* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/drivers/tigon3.c b/drivers/tigon3.c
index c20dbe5..ec2cd2a 100644
--- a/drivers/tigon3.c
+++ b/drivers/tigon3.c
@@ -53,7 +53,7 @@
STATIC LM_STATUS LM_SetupCopperPhy(PLM_DEVICE_BLOCK pDevice);
STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid(LM_UINT16 Svid, LM_UINT16 Ssid);
STATIC LM_STATUS LM_DmaTest(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
- LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize);
+ LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize);
STATIC LM_STATUS LM_HaltCpu(PLM_DEVICE_BLOCK pDevice,LM_UINT32 cpu_number);
STATIC LM_STATUS LM_ResetChip(PLM_DEVICE_BLOCK pDevice);
STATIC LM_STATUS LM_Test4GBoundary(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket,
@@ -90,7 +90,6 @@
} /* LM_RegRdInd */
-
/******************************************************************************/
/* Description: */
/* */
@@ -113,7 +112,6 @@
} /* LM_RegWrInd */
-
/******************************************************************************/
/* Description: */
/* */
@@ -140,7 +138,6 @@
} /* LM_MemRdInd */
-
/******************************************************************************/
/* Description: */
/* */
@@ -163,7 +160,6 @@
} /* LM_MemWrInd */
-
/******************************************************************************/
/* Description: */
/* */
@@ -184,84 +180,84 @@
pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
while(pPacket) {
- switch(pPacket->u.Rx.RcvProdRing) {
+ switch(pPacket->u.Rx.RcvProdRing) {
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */
- /* Initialize the buffer descriptor. */
- pRcvBd =
- &pDevice->pRxJumboBdVirt[pDevice->RxJumboProdIdx];
- pRcvBd->Flags = RCV_BD_FLAG_END | RCV_BD_FLAG_JUMBO_RING;
- pRcvBd->Len = (LM_UINT16) pDevice->RxJumboBufferSize;
+ case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */
+ /* Initialize the buffer descriptor. */
+ pRcvBd =
+ &pDevice->pRxJumboBdVirt[pDevice->RxJumboProdIdx];
+ pRcvBd->Flags = RCV_BD_FLAG_END | RCV_BD_FLAG_JUMBO_RING;
+ pRcvBd->Len = (LM_UINT16) pDevice->RxJumboBufferSize;
- /* Initialize the receive buffer pointer */
+ /* Initialize the receive buffer pointer */
#if 0 /* Jimmy, deleted in new */
- pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low;
- pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High;
+ pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low;
+ pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High;
#endif
- MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr);
+ MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr);
- /* The opaque field may point to an offset from a fix addr. */
- pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) -
- MM_UINT_PTR(pDevice->pPacketDescBase));
+ /* The opaque field may point to an offset from a fix addr. */
+ pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) -
+ MM_UINT_PTR(pDevice->pPacketDescBase));
- /* Update the producer index. */
- pDevice->RxJumboProdIdx = (pDevice->RxJumboProdIdx + 1) &
- T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
+ /* Update the producer index. */
+ pDevice->RxJumboProdIdx = (pDevice->RxJumboProdIdx + 1) &
+ T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
- JumboBdAdded++;
- break;
+ JumboBdAdded++;
+ break;
#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
- case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */
- /* Initialize the buffer descriptor. */
- pRcvBd = &pDevice->pRxStdBdVirt[pDevice->RxStdProdIdx];
- pRcvBd->Flags = RCV_BD_FLAG_END;
- pRcvBd->Len = MAX_STD_RCV_BUFFER_SIZE;
+ case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */
+ /* Initialize the buffer descriptor. */
+ pRcvBd = &pDevice->pRxStdBdVirt[pDevice->RxStdProdIdx];
+ pRcvBd->Flags = RCV_BD_FLAG_END;
+ pRcvBd->Len = MAX_STD_RCV_BUFFER_SIZE;
- /* Initialize the receive buffer pointer */
+ /* Initialize the receive buffer pointer */
#if 0 /* Jimmy, deleted in new replaced with MM_MapRxDma */
- pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low;
- pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High;
+ pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low;
+ pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High;
#endif
- MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr);
+ MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr);
- /* The opaque field may point to an offset from a fix addr. */
- pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) -
- MM_UINT_PTR(pDevice->pPacketDescBase));
+ /* The opaque field may point to an offset from a fix addr. */
+ pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) -
+ MM_UINT_PTR(pDevice->pPacketDescBase));
- /* Update the producer index. */
- pDevice->RxStdProdIdx = (pDevice->RxStdProdIdx + 1) &
- T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
+ /* Update the producer index. */
+ pDevice->RxStdProdIdx = (pDevice->RxStdProdIdx + 1) &
+ T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
- StdBdAdded++;
- break;
+ StdBdAdded++;
+ break;
- case T3_UNKNOWN_RCV_PROD_RING:
- default:
- Lmstatus = LM_STATUS_FAILURE;
- break;
- } /* switch */
+ case T3_UNKNOWN_RCV_PROD_RING:
+ default:
+ Lmstatus = LM_STATUS_FAILURE;
+ break;
+ } /* switch */
- /* Bail out if there is any error. */
- if(Lmstatus != LM_STATUS_SUCCESS)
- {
- break;
- }
+ /* Bail out if there is any error. */
+ if(Lmstatus != LM_STATUS_SUCCESS)
+ {
+ break;
+ }
- pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
+ pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
} /* while */
wmb();
/* Update the procedure index. */
if(StdBdAdded)
{
- MB_REG_WR(pDevice, Mailbox.RcvStdProdIdx.Low, pDevice->RxStdProdIdx);
+ MB_REG_WR(pDevice, Mailbox.RcvStdProdIdx.Low, pDevice->RxStdProdIdx);
}
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
if(JumboBdAdded)
{
- MB_REG_WR(pDevice, Mailbox.RcvJumboProdIdx.Low,
- pDevice->RxJumboProdIdx);
+ MB_REG_WR(pDevice, Mailbox.RcvJumboProdIdx.Low,
+ pDevice->RxJumboProdIdx);
}
#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
@@ -283,12 +279,12 @@
/* Intialize clock period and state machine. */
Value32 = SEEPROM_ADDR_CLK_PERD(SEEPROM_CLOCK_PERIOD) |
- SEEPROM_ADDR_FSM_RESET;
+ SEEPROM_ADDR_FSM_RESET;
REG_WR(pDevice, Grc.EepromAddr, Value32);
for(j = 0; j < 100; j++)
{
- MM_Wait(10);
+ MM_Wait(10);
}
/* Serial eeprom access using the Grc.EepromAddr/EepromData registers. */
@@ -297,16 +293,16 @@
/* Set the 5701 compatibility mode if we are using EEPROM. */
if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
- T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701)
+ T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701)
{
- Value32 = REG_RD(pDevice, Nvram.Config1);
- if((Value32 & FLASH_INTERFACE_ENABLE) == 0)
- {
- /* Use the new interface to read EEPROM. */
- Value32 &= ~FLASH_COMPAT_BYPASS;
+ Value32 = REG_RD(pDevice, Nvram.Config1);
+ if((Value32 & FLASH_INTERFACE_ENABLE) == 0)
+ {
+ /* Use the new interface to read EEPROM. */
+ Value32 &= ~FLASH_COMPAT_BYPASS;
- REG_WR(pDevice, Nvram.Config1, Value32);
- }
+ REG_WR(pDevice, Nvram.Config1, Value32);
+ }
}
} /* LM_NvRamInit */
@@ -329,7 +325,7 @@
if(Offset > SEEPROM_CHIP_SIZE)
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
Dev = Offset / SEEPROM_CHIP_SIZE;
@@ -337,33 +333,32 @@
Value32 = REG_RD(pDevice, Grc.EepromAddr);
Value32 &= ~(SEEPROM_ADDR_ADDRESS_MASK | SEEPROM_ADDR_DEV_ID_MASK |
- SEEPROM_ADDR_RW_MASK);
+ SEEPROM_ADDR_RW_MASK);
REG_WR(pDevice, Grc.EepromAddr, Value32 | SEEPROM_ADDR_DEV_ID(Dev) |
- SEEPROM_ADDR_ADDRESS(Addr) | SEEPROM_ADDR_START | SEEPROM_ADDR_READ);
+ SEEPROM_ADDR_ADDRESS(Addr) | SEEPROM_ADDR_START | SEEPROM_ADDR_READ);
for(j = 0; j < 1000; j++)
{
- Value32 = REG_RD(pDevice, Grc.EepromAddr);
- if(Value32 & SEEPROM_ADDR_COMPLETE)
- {
- break;
- }
- MM_Wait(10);
+ Value32 = REG_RD(pDevice, Grc.EepromAddr);
+ if(Value32 & SEEPROM_ADDR_COMPLETE)
+ {
+ break;
+ }
+ MM_Wait(10);
}
if(Value32 & SEEPROM_ADDR_COMPLETE)
{
- Value32 = REG_RD(pDevice, Grc.EepromData);
- *pData = Value32;
+ Value32 = REG_RD(pDevice, Grc.EepromData);
+ *pData = Value32;
- return LM_STATUS_SUCCESS;
+ return LM_STATUS_SUCCESS;
}
return LM_STATUS_FAILURE;
} /* LM_EepromRead */
-
/******************************************************************************/
/* Description: */
/* */
@@ -380,88 +375,88 @@
LM_UINT32 j;
if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
{
- Status = LM_EepromRead(pDevice, Offset, pData);
+ Status = LM_EepromRead(pDevice, Offset, pData);
}
else
{
- /* Determine if we have flash or EEPROM. */
- Value32 = REG_RD(pDevice, Nvram.Config1);
- if(Value32 & FLASH_INTERFACE_ENABLE)
- {
- if(Value32 & FLASH_SSRAM_BUFFERRED_MODE)
- {
- Offset = ((Offset/BUFFERED_FLASH_PAGE_SIZE) <<
- BUFFERED_FLASH_PAGE_POS) +
- (Offset % BUFFERED_FLASH_PAGE_SIZE);
- }
- }
+ /* Determine if we have flash or EEPROM. */
+ Value32 = REG_RD(pDevice, Nvram.Config1);
+ if(Value32 & FLASH_INTERFACE_ENABLE)
+ {
+ if(Value32 & FLASH_SSRAM_BUFFERRED_MODE)
+ {
+ Offset = ((Offset/BUFFERED_FLASH_PAGE_SIZE) <<
+ BUFFERED_FLASH_PAGE_POS) +
+ (Offset % BUFFERED_FLASH_PAGE_SIZE);
+ }
+ }
- REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_SET1);
- for (j = 0; j < 1000; j++)
- {
- if (REG_RD(pDevice, Nvram.SwArb) & SW_ARB_GNT1)
- {
- break;
- }
- MM_Wait(20);
- }
- if (j == 1000)
- {
- return LM_STATUS_FAILURE;
- }
+ REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_SET1);
+ for (j = 0; j < 1000; j++)
+ {
+ if (REG_RD(pDevice, Nvram.SwArb) & SW_ARB_GNT1)
+ {
+ break;
+ }
+ MM_Wait(20);
+ }
+ if (j == 1000)
+ {
+ return LM_STATUS_FAILURE;
+ }
- /* Read from flash or EEPROM with the new 5703/02 interface. */
- REG_WR(pDevice, Nvram.Addr, Offset & NVRAM_ADDRESS_MASK);
+ /* Read from flash or EEPROM with the new 5703/02 interface. */
+ REG_WR(pDevice, Nvram.Addr, Offset & NVRAM_ADDRESS_MASK);
- REG_WR(pDevice, Nvram.Cmd, NVRAM_CMD_RD | NVRAM_CMD_DO_IT |
- NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
+ REG_WR(pDevice, Nvram.Cmd, NVRAM_CMD_RD | NVRAM_CMD_DO_IT |
+ NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
- /* Wait for the done bit to clear. */
- for(j = 0; j < 500; j++)
- {
- MM_Wait(10);
+ /* Wait for the done bit to clear. */
+ for(j = 0; j < 500; j++)
+ {
+ MM_Wait(10);
- Value32 = REG_RD(pDevice, Nvram.Cmd);
- if(!(Value32 & NVRAM_CMD_DONE))
- {
- break;
- }
- }
+ Value32 = REG_RD(pDevice, Nvram.Cmd);
+ if(!(Value32 & NVRAM_CMD_DONE))
+ {
+ break;
+ }
+ }
- /* Wait for the done bit. */
- if(!(Value32 & NVRAM_CMD_DONE))
- {
- for(j = 0; j < 500; j++)
- {
- MM_Wait(10);
+ /* Wait for the done bit. */
+ if(!(Value32 & NVRAM_CMD_DONE))
+ {
+ for(j = 0; j < 500; j++)
+ {
+ MM_Wait(10);
- Value32 = REG_RD(pDevice, Nvram.Cmd);
- if(Value32 & NVRAM_CMD_DONE)
- {
- MM_Wait(10);
+ Value32 = REG_RD(pDevice, Nvram.Cmd);
+ if(Value32 & NVRAM_CMD_DONE)
+ {
+ MM_Wait(10);
- *pData = REG_RD(pDevice, Nvram.ReadData);
+ *pData = REG_RD(pDevice, Nvram.ReadData);
- /* Change the endianess. */
- *pData = ((*pData & 0xff) << 24)| ((*pData & 0xff00) << 8)|
- ((*pData & 0xff0000) >> 8) | ((*pData >> 24) & 0xff);
+ /* Change the endianess. */
+ *pData = ((*pData & 0xff) << 24)| ((*pData & 0xff00) << 8)|
+ ((*pData & 0xff0000) >> 8) | ((*pData >> 24) & 0xff);
- break;
- }
- }
- }
+ break;
+ }
+ }
+ }
- REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1);
- if(Value32 & NVRAM_CMD_DONE)
- {
- Status = LM_STATUS_SUCCESS;
- }
- else
- {
- Status = LM_STATUS_FAILURE;
- }
+ REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1);
+ if(Value32 & NVRAM_CMD_DONE)
+ {
+ Status = LM_STATUS_SUCCESS;
+ }
+ else
+ {
+ Status = LM_STATUS_FAILURE;
+ }
}
return Status;
@@ -480,53 +475,53 @@
/* Read PN from VPD */
for (j = 0; j < 256; j += 4, Vpd_dptr++ )
{
- if (LM_NvramRead(pDevice, 0x100 + j, &Value32) != LM_STATUS_SUCCESS) {
- printf("BCM570x: LM_ReadVPD: VPD read failed"
+ if (LM_NvramRead(pDevice, 0x100 + j, &Value32) != LM_STATUS_SUCCESS) {
+ printf("BCM570x: LM_ReadVPD: VPD read failed"
" (no EEPROM onboard)\n");
- return;
- }
- *Vpd_dptr = cpu_to_le32(Value32);
+ return;
+ }
+ *Vpd_dptr = cpu_to_le32(Value32);
}
for (j = 0; j < 256; )
{
- unsigned int Vpd_r_len;
- unsigned int Vpd_r_end;
+ unsigned int Vpd_r_len;
+ unsigned int Vpd_r_end;
- if ((Vpd[j] == 0x82) || (Vpd[j] == 0x91))
- {
- j = j + 3 + Vpd[j + 1] + (Vpd[j + 2] << 8);
- }
- else if (Vpd[j] == 0x90)
- {
- Vpd_r_len = Vpd[j + 1] + (Vpd[j + 2] << 8);
- j += 3;
- Vpd_r_end = Vpd_r_len + j;
- while (j < Vpd_r_end)
- {
- if ((Vpd[j] == 'P') && (Vpd[j + 1] == 'N'))
- {
- unsigned int len = Vpd[j + 2];
+ if ((Vpd[j] == 0x82) || (Vpd[j] == 0x91))
+ {
+ j = j + 3 + Vpd[j + 1] + (Vpd[j + 2] << 8);
+ }
+ else if (Vpd[j] == 0x90)
+ {
+ Vpd_r_len = Vpd[j + 1] + (Vpd[j + 2] << 8);
+ j += 3;
+ Vpd_r_end = Vpd_r_len + j;
+ while (j < Vpd_r_end)
+ {
+ if ((Vpd[j] == 'P') && (Vpd[j + 1] == 'N'))
+ {
+ unsigned int len = Vpd[j + 2];
- if (len <= 24)
- {
- memcpy(pDevice->PartNo, &Vpd[j + 3], len);
- }
- break;
- }
- else
- {
- if (Vpd[j + 2] == 0)
- {
- break;
- }
- j = j + Vpd[j + 2];
- }
- }
- break;
- }
- else {
- break;
- }
+ if (len <= 24)
+ {
+ memcpy(pDevice->PartNo, &Vpd[j + 3], len);
+ }
+ break;
+ }
+ else
+ {
+ if (Vpd[j + 2] == 0)
+ {
+ break;
+ }
+ j = j + Vpd[j + 2];
+ }
+ }
+ break;
+ }
+ else {
+ break;
+ }
}
}
@@ -537,59 +532,59 @@
int i;
if (LM_NvramRead(pDevice, 0x0, &Value32) != LM_STATUS_SUCCESS)
- return;
+ return;
if (Value32 != 0xaa559966)
- return;
+ return;
if (LM_NvramRead(pDevice, 0xc, &offset) != LM_STATUS_SUCCESS)
- return;
+ return;
offset = ((offset & 0xff) << 24)| ((offset & 0xff00) << 8)|
- ((offset & 0xff0000) >> 8) | ((offset >> 24) & 0xff);
+ ((offset & 0xff0000) >> 8) | ((offset >> 24) & 0xff);
if (LM_NvramRead(pDevice, offset, &Value32) != LM_STATUS_SUCCESS)
- return;
+ return;
if ((Value32 == 0x0300000e) &&
- (LM_NvramRead(pDevice, offset + 4, &Value32) == LM_STATUS_SUCCESS) &&
- (Value32 == 0)) {
+ (LM_NvramRead(pDevice, offset + 4, &Value32) == LM_STATUS_SUCCESS) &&
+ (Value32 == 0)) {
- if (LM_NvramRead(pDevice, offset + 8, &ver_offset) != LM_STATUS_SUCCESS)
- return;
- ver_offset = ((ver_offset & 0xff0000) >> 8) |
- ((ver_offset >> 24) & 0xff);
- for (i = 0; i < 16; i += 4) {
- if (LM_NvramRead(pDevice, offset + ver_offset + i, &Value32) !=
- LM_STATUS_SUCCESS)
- {
- return;
- }
- *((LM_UINT32 *) &pDevice->BootCodeVer[i]) = cpu_to_le32(Value32);
- }
+ if (LM_NvramRead(pDevice, offset + 8, &ver_offset) != LM_STATUS_SUCCESS)
+ return;
+ ver_offset = ((ver_offset & 0xff0000) >> 8) |
+ ((ver_offset >> 24) & 0xff);
+ for (i = 0; i < 16; i += 4) {
+ if (LM_NvramRead(pDevice, offset + ver_offset + i, &Value32) !=
+ LM_STATUS_SUCCESS)
+ {
+ return;
+ }
+ *((LM_UINT32 *) &pDevice->BootCodeVer[i]) = cpu_to_le32(Value32);
+ }
}
else {
- char c;
+ char c;
- if (LM_NvramRead(pDevice, 0x94, &Value32) != LM_STATUS_SUCCESS)
- return;
+ if (LM_NvramRead(pDevice, 0x94, &Value32) != LM_STATUS_SUCCESS)
+ return;
- i = 0;
- c = ((Value32 & 0xff0000) >> 16);
+ i = 0;
+ c = ((Value32 & 0xff0000) >> 16);
- if (c < 10) {
- pDevice->BootCodeVer[i++] = c + '0';
- }
- else {
- pDevice->BootCodeVer[i++] = (c / 10) + '0';
- pDevice->BootCodeVer[i++] = (c % 10) + '0';
- }
- pDevice->BootCodeVer[i++] = '.';
- c = (Value32 & 0xff000000) >> 24;
- if (c < 10) {
- pDevice->BootCodeVer[i++] = c + '0';
- }
- else {
- pDevice->BootCodeVer[i++] = (c / 10) + '0';
- pDevice->BootCodeVer[i++] = (c % 10) + '0';
- }
- pDevice->BootCodeVer[i] = 0;
+ if (c < 10) {
+ pDevice->BootCodeVer[i++] = c + '0';
+ }
+ else {
+ pDevice->BootCodeVer[i++] = (c / 10) + '0';
+ pDevice->BootCodeVer[i++] = (c % 10) + '0';
+ }
+ pDevice->BootCodeVer[i++] = '.';
+ c = (Value32 & 0xff000000) >> 24;
+ if (c < 10) {
+ pDevice->BootCodeVer[i++] = c + '0';
+ }
+ else {
+ pDevice->BootCodeVer[i++] = (c / 10) + '0';
+ pDevice->BootCodeVer[i++] = (c % 10) + '0';
+ }
+ pDevice->BootCodeVer[i] = 0;
}
}
@@ -602,57 +597,57 @@
if (PciState & T3_PCI_STATE_32BIT_PCI_BUS)
{
- strcpy(pDevice->BusSpeedStr, "32-bit ");
+ strcpy(pDevice->BusSpeedStr, "32-bit ");
}
else
{
- strcpy(pDevice->BusSpeedStr, "64-bit ");
+ strcpy(pDevice->BusSpeedStr, "64-bit ");
}
if (PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)
{
- strcat(pDevice->BusSpeedStr, "PCI ");
- if (PciState & T3_PCI_STATE_HIGH_BUS_SPEED)
- {
- SpeedStr = "66MHz";
- }
- else
- {
- SpeedStr = "33MHz";
- }
+ strcat(pDevice->BusSpeedStr, "PCI ");
+ if (PciState & T3_PCI_STATE_HIGH_BUS_SPEED)
+ {
+ SpeedStr = "66MHz";
+ }
+ else
+ {
+ SpeedStr = "33MHz";
+ }
}
else
{
- strcat(pDevice->BusSpeedStr, "PCIX ");
- if (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE)
- {
- SpeedStr = "133MHz";
- }
- else
- {
- ClockCtrl = REG_RD(pDevice, PciCfg.ClockCtrl) & 0x1f;
- switch (ClockCtrl)
- {
- case 0:
- SpeedStr = "33MHz";
- break;
+ strcat(pDevice->BusSpeedStr, "PCIX ");
+ if (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE)
+ {
+ SpeedStr = "133MHz";
+ }
+ else
+ {
+ ClockCtrl = REG_RD(pDevice, PciCfg.ClockCtrl) & 0x1f;
+ switch (ClockCtrl)
+ {
+ case 0:
+ SpeedStr = "33MHz";
+ break;
- case 2:
- SpeedStr = "50MHz";
- break;
+ case 2:
+ SpeedStr = "50MHz";
+ break;
- case 4:
- SpeedStr = "66MHz";
- break;
+ case 4:
+ SpeedStr = "66MHz";
+ break;
- case 6:
- SpeedStr = "100MHz";
- break;
+ case 6:
+ SpeedStr = "100MHz";
+ break;
- case 7:
- SpeedStr = "133MHz";
- break;
- }
- }
+ case 7:
+ SpeedStr = "133MHz";
+ break;
+ }
+ }
}
strcat(pDevice->BusSpeedStr, SpeedStr);
}
@@ -682,7 +677,7 @@
Status = MM_ReadConfig32(pDevice, PCI_VENDOR_ID_REG, &Value32);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
pDevice->PciVendorId = (LM_UINT16) Value32;
pDevice->PciDeviceId = (LM_UINT16) (Value32 >> 16);
@@ -697,13 +692,13 @@
(Value32 != T3_PCI_ID_BCM5703x) &&
(Value32 != T3_PCI_ID_BCM5704))
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
Status = MM_ReadConfig32(pDevice, PCI_REV_ID_REG, &Value32);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
pDevice->PciRevId = (LM_UINT8) Value32;
@@ -711,7 +706,7 @@
Status = MM_ReadConfig32(pDevice, PCI_INT_LINE_REG, &Value32);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
pDevice->Irq = (LM_UINT8) Value32;
@@ -726,7 +721,7 @@
Status = MM_ReadConfig32(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, &Value32);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
pDevice->SubsystemVendorId = (LM_UINT16) Value32;
@@ -739,10 +734,10 @@
pDevice->SavedCacheLineReg = Value32;
if(pDevice->ChipRevId != T3_CHIP_ID_5703_A1 &&
- pDevice->ChipRevId != T3_CHIP_ID_5703_A2 &&
- pDevice->ChipRevId != T3_CHIP_ID_5704_A0)
+ pDevice->ChipRevId != T3_CHIP_ID_5703_A2 &&
+ pDevice->ChipRevId != T3_CHIP_ID_5704_A0)
{
- pDevice->UndiFix = FALSE;
+ pDevice->UndiFix = FALSE;
}
#if !PCIX_TARGET_WORKAROUND
pDevice->UndiFix = FALSE;
@@ -750,13 +745,13 @@
/* Map the memory base to system address space. */
if (!pDevice->UndiFix)
{
- Status = MM_MapMemBase(pDevice);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
- /* Initialize the memory view pointer. */
- pDevice->pMemView = (PT3_STD_MEM_MAP) pDevice->pMappedMemBase;
+ Status = MM_MapMemBase(pDevice);
+ if(Status != LM_STATUS_SUCCESS)
+ {
+ return Status;
+ }
+ /* Initialize the memory view pointer. */
+ pDevice->pMemView = (PT3_STD_MEM_MAP) pDevice->pMappedMemBase;
}
#if PCIX_TARGET_WORKAROUND
@@ -766,15 +761,15 @@
MM_ReadConfig32(pDevice, T3_PCI_STATE_REG, &Value32);
if((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0)
{
- /* Enable PCI-X workaround only if we are running on 5700 BX. */
- if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
- {
- pDevice->EnablePciXFix = TRUE;
- }
+ /* Enable PCI-X workaround only if we are running on 5700 BX. */
+ if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
+ {
+ pDevice->EnablePciXFix = TRUE;
+ }
}
if (pDevice->UndiFix)
{
- pDevice->EnablePciXFix = TRUE;
+ pDevice->EnablePciXFix = TRUE;
}
#endif
/* Bx bug: due to the "byte_enable bug" in PCI-X mode, the power */
@@ -796,30 +791,30 @@
#if PCIX_TARGET_WORKAROUND
/* if we are in PCI-X mode, also make sure mem-mapping and SERR#/PERR#
- are enabled */
+ are enabled */
if (pDevice->EnablePciXFix == TRUE) {
- Value32 |= (PCI_MEM_SPACE_ENABLE | PCI_SYSTEM_ERROR_ENABLE |
- PCI_PARITY_ERROR_ENABLE);
+ Value32 |= (PCI_MEM_SPACE_ENABLE | PCI_SYSTEM_ERROR_ENABLE |
+ PCI_PARITY_ERROR_ENABLE);
}
if (pDevice->UndiFix)
{
- Value32 &= ~PCI_MEM_SPACE_ENABLE;
+ Value32 &= ~PCI_MEM_SPACE_ENABLE;
}
#endif
if(pDevice->EnableMWI)
{
- Value32 |= PCI_MEMORY_WRITE_INVALIDATE;
+ Value32 |= PCI_MEMORY_WRITE_INVALIDATE;
}
else {
- Value32 &= (~PCI_MEMORY_WRITE_INVALIDATE);
+ Value32 &= (~PCI_MEMORY_WRITE_INVALIDATE);
}
/* Error out if mem-mapping is NOT enabled for PCI systems */
if (!(Value32 | PCI_MEM_SPACE_ENABLE))
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
/* save the value we are going to write into the PCI command word */
@@ -828,7 +823,7 @@
Status = MM_WriteConfig32(pDevice, PCI_COMMAND_REG, Value32);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
/* Set power state to D0. */
@@ -836,21 +831,21 @@
#ifdef BIG_ENDIAN_PCI
pDevice->MiscHostCtrl =
- MISC_HOST_CTRL_MASK_PCI_INT |
- MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
- MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
- MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
+ MISC_HOST_CTRL_MASK_PCI_INT |
+ MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
+ MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
+ MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
#else /* No CPU Swap modes for PCI IO */
/* Setup the mode registers. */
pDevice->MiscHostCtrl =
- MISC_HOST_CTRL_MASK_PCI_INT |
- MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
+ MISC_HOST_CTRL_MASK_PCI_INT |
+ MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
#ifdef BIG_ENDIAN_HOST
- MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP |
+ MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP |
#endif /* BIG_ENDIAN_HOST */
- MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
- MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
+ MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
+ MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
#endif /* !BIG_ENDIAN_PCI */
/* write to PCI misc host ctr first in order to enable indirect accesses */
@@ -865,7 +860,7 @@
/* No CPU Swap modes for PCI IO */
#ifdef BIG_ENDIAN_HOST
Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
#else
Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA;
#endif
@@ -875,8 +870,8 @@
if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
{
- REG_WR(pDevice, Grc.LocalCtrl, GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1);
+ REG_WR(pDevice, Grc.LocalCtrl, GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1);
}
MM_Wait(40);
@@ -885,10 +880,10 @@
if (REG_RD(pDevice, PciCfg.ClockCtrl) & T3_PCI_44MHZ_CORE_CLOCK)
{
- REG_WR(pDevice, PciCfg.ClockCtrl, T3_PCI_44MHZ_CORE_CLOCK |
- T3_PCI_SELECT_ALTERNATE_CLOCK);
- REG_WR(pDevice, PciCfg.ClockCtrl, T3_PCI_SELECT_ALTERNATE_CLOCK);
- MM_Wait(40); /* required delay is 27usec */
+ REG_WR(pDevice, PciCfg.ClockCtrl, T3_PCI_44MHZ_CORE_CLOCK |
+ T3_PCI_SELECT_ALTERNATE_CLOCK);
+ REG_WR(pDevice, PciCfg.ClockCtrl, T3_PCI_SELECT_ALTERNATE_CLOCK);
+ MM_Wait(40); /* required delay is 27usec */
}
REG_WR(pDevice, PciCfg.ClockCtrl, 0);
REG_WR(pDevice, PciCfg.MemWindowBaseAddr, 0);
@@ -896,21 +891,21 @@
#if PCIX_TARGET_WORKAROUND
MM_ReadConfig32(pDevice, T3_PCI_STATE_REG, &Value32);
if ((pDevice->EnablePciXFix == FALSE) &&
- ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0))
+ ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0))
{
- if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B2 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B5)
- {
- __raw_writel(0, &(pDevice->pMemView->uIntMem.MemBlock32K[0x300]));
- __raw_writel(0, &(pDevice->pMemView->uIntMem.MemBlock32K[0x301]));
- __raw_writel(0xffffffff, &(pDevice->pMemView->uIntMem.MemBlock32K[0x301]));
- if (__raw_readl(&(pDevice->pMemView->uIntMem.MemBlock32K[0x300])))
- {
- pDevice->EnablePciXFix = TRUE;
- }
- }
+ if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B2 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B5)
+ {
+ __raw_writel(0, &(pDevice->pMemView->uIntMem.MemBlock32K[0x300]));
+ __raw_writel(0, &(pDevice->pMemView->uIntMem.MemBlock32K[0x301]));
+ __raw_writel(0xffffffff, &(pDevice->pMemView->uIntMem.MemBlock32K[0x301]));
+ if (__raw_readl(&(pDevice->pMemView->uIntMem.MemBlock32K[0x300])))
+ {
+ pDevice->EnablePciXFix = TRUE;
+ }
+ }
}
#endif
#if 1
@@ -927,44 +922,44 @@
if((Value32 >> 16) == 0x484b)
{
- pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 8);
- pDevice->NodeAddress[1] = (LM_UINT8) Value32;
+ pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 8);
+ pDevice->NodeAddress[1] = (LM_UINT8) Value32;
- Value32 = MEM_RD_OFFSET(pDevice, T3_MAC_ADDR_LOW_MAILBOX);
+ Value32 = MEM_RD_OFFSET(pDevice, T3_MAC_ADDR_LOW_MAILBOX);
- pDevice->NodeAddress[2] = (LM_UINT8) (Value32 >> 24);
- pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 16);
- pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 8);
- pDevice->NodeAddress[5] = (LM_UINT8) Value32;
+ pDevice->NodeAddress[2] = (LM_UINT8) (Value32 >> 24);
+ pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 16);
+ pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 8);
+ pDevice->NodeAddress[5] = (LM_UINT8) Value32;
- Status = LM_STATUS_SUCCESS;
+ Status = LM_STATUS_SUCCESS;
}
else
{
- Status = LM_NvramRead(pDevice, 0x7c, &Value32);
- if(Status == LM_STATUS_SUCCESS)
- {
- pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 16);
- pDevice->NodeAddress[1] = (LM_UINT8) (Value32 >> 24);
+ Status = LM_NvramRead(pDevice, 0x7c, &Value32);
+ if(Status == LM_STATUS_SUCCESS)
+ {
+ pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 16);
+ pDevice->NodeAddress[1] = (LM_UINT8) (Value32 >> 24);
- Status = LM_NvramRead(pDevice, 0x80, &Value32);
+ Status = LM_NvramRead(pDevice, 0x80, &Value32);
- pDevice->NodeAddress[2] = (LM_UINT8) Value32;
- pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 8);
- pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 16);
- pDevice->NodeAddress[5] = (LM_UINT8) (Value32 >> 24);
- }
+ pDevice->NodeAddress[2] = (LM_UINT8) Value32;
+ pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 8);
+ pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 16);
+ pDevice->NodeAddress[5] = (LM_UINT8) (Value32 >> 24);
+ }
}
/* Assign a default address. */
if(Status != LM_STATUS_SUCCESS)
{
#ifndef EMBEDDED
- printk(KERN_ERR "Cannot get MAC addr from NVRAM. Using default.\n");
+ printk(KERN_ERR "Cannot get MAC addr from NVRAM. Using default.\n");
#endif
- pDevice->NodeAddress[0] = 0x00; pDevice->NodeAddress[1] = 0x10;
- pDevice->NodeAddress[2] = 0x18; pDevice->NodeAddress[3] = 0x68;
- pDevice->NodeAddress[4] = 0x61; pDevice->NodeAddress[5] = 0x76;
+ pDevice->NodeAddress[0] = 0x00; pDevice->NodeAddress[1] = 0x10;
+ pDevice->NodeAddress[2] = 0x18; pDevice->NodeAddress[3] = 0x68;
+ pDevice->NodeAddress[4] = 0x61; pDevice->NodeAddress[5] = 0x76;
}
pDevice->PermanentNodeAddress[0] = pDevice->NodeAddress[0];
@@ -1016,13 +1011,13 @@
switch (T3_ASIC_REV(pDevice->ChipRevId))
{
case T3_ASIC_REV_5704:
- pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
- pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE64;
- break;
+ pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
+ pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE64;
+ break;
default:
- pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
- pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE96;
- break;
+ pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
+ pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE96;
+ break;
}
pDevice->LinkStatus = LM_STATUS_LINK_DOWN;
@@ -1036,117 +1031,117 @@
/* Make this is a known adapter. */
pAdapterInfo = LM_GetAdapterInfoBySsid(pDevice->SubsystemVendorId,
- pDevice->SubsystemId);
+ pDevice->SubsystemId);
pDevice->BondId = REG_RD(pDevice, Grc.MiscCfg) & GRC_MISC_BD_ID_MASK;
if (pDevice->BondId != GRC_MISC_BD_ID_5700 &&
- pDevice->BondId != GRC_MISC_BD_ID_5701 &&
- pDevice->BondId != GRC_MISC_BD_ID_5702FE &&
- pDevice->BondId != GRC_MISC_BD_ID_5703 &&
- pDevice->BondId != GRC_MISC_BD_ID_5703S &&
- pDevice->BondId != GRC_MISC_BD_ID_5704 &&
- pDevice->BondId != GRC_MISC_BD_ID_5704CIOBE)
+ pDevice->BondId != GRC_MISC_BD_ID_5701 &&
+ pDevice->BondId != GRC_MISC_BD_ID_5702FE &&
+ pDevice->BondId != GRC_MISC_BD_ID_5703 &&
+ pDevice->BondId != GRC_MISC_BD_ID_5703S &&
+ pDevice->BondId != GRC_MISC_BD_ID_5704 &&
+ pDevice->BondId != GRC_MISC_BD_ID_5704CIOBE)
{
- return LM_STATUS_UNKNOWN_ADAPTER;
+ return LM_STATUS_UNKNOWN_ADAPTER;
}
pDevice->SplitModeEnable = SPLIT_MODE_DISABLE;
if ((pDevice->ChipRevId == T3_CHIP_ID_5704_A0) &&
- (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE))
+ (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE))
{
- pDevice->SplitModeEnable = SPLIT_MODE_ENABLE;
- pDevice->SplitModeMaxReq = SPLIT_MODE_5704_MAX_REQ;
+ pDevice->SplitModeEnable = SPLIT_MODE_ENABLE;
+ pDevice->SplitModeMaxReq = SPLIT_MODE_5704_MAX_REQ;
}
/* Get Eeprom info. */
Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_SIG_ADDR);
if (Value32 == T3_NIC_DATA_SIG)
{
- EeSigFound = TRUE;
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_NIC_CFG_ADDR);
+ EeSigFound = TRUE;
+ Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_NIC_CFG_ADDR);
- /* Determine PHY type. */
- switch (Value32 & T3_NIC_CFG_PHY_TYPE_MASK)
- {
- case T3_NIC_CFG_PHY_TYPE_COPPER:
- EePhyTypeSerdes = FALSE;
- break;
+ /* Determine PHY type. */
+ switch (Value32 & T3_NIC_CFG_PHY_TYPE_MASK)
+ {
+ case T3_NIC_CFG_PHY_TYPE_COPPER:
+ EePhyTypeSerdes = FALSE;
+ break;
- case T3_NIC_CFG_PHY_TYPE_FIBER:
- EePhyTypeSerdes = TRUE;
- break;
+ case T3_NIC_CFG_PHY_TYPE_FIBER:
+ EePhyTypeSerdes = TRUE;
+ break;
- default:
- EePhyTypeSerdes = FALSE;
- break;
- }
+ default:
+ EePhyTypeSerdes = FALSE;
+ break;
+ }
- /* Determine PHY led mode. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- switch(Value32 & T3_NIC_CFG_LED_MODE_MASK)
- {
- case T3_NIC_CFG_LED_MODE_TRIPLE_SPEED:
- EePhyLedMode = LED_MODE_THREE_LINK;
- break;
+ /* Determine PHY led mode. */
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ switch(Value32 & T3_NIC_CFG_LED_MODE_MASK)
+ {
+ case T3_NIC_CFG_LED_MODE_TRIPLE_SPEED:
+ EePhyLedMode = LED_MODE_THREE_LINK;
+ break;
- case T3_NIC_CFG_LED_MODE_LINK_SPEED:
- EePhyLedMode = LED_MODE_LINK10;
- break;
+ case T3_NIC_CFG_LED_MODE_LINK_SPEED:
+ EePhyLedMode = LED_MODE_LINK10;
+ break;
- default:
- EePhyLedMode = LED_MODE_AUTO;
- break;
- }
- }
- else
- {
- switch(Value32 & T3_NIC_CFG_LED_MODE_MASK)
- {
- case T3_NIC_CFG_LED_MODE_OPEN_DRAIN:
- EePhyLedMode = LED_MODE_OPEN_DRAIN;
- break;
+ default:
+ EePhyLedMode = LED_MODE_AUTO;
+ break;
+ }
+ }
+ else
+ {
+ switch(Value32 & T3_NIC_CFG_LED_MODE_MASK)
+ {
+ case T3_NIC_CFG_LED_MODE_OPEN_DRAIN:
+ EePhyLedMode = LED_MODE_OPEN_DRAIN;
+ break;
- case T3_NIC_CFG_LED_MODE_OUTPUT:
- EePhyLedMode = LED_MODE_OUTPUT;
- break;
+ case T3_NIC_CFG_LED_MODE_OUTPUT:
+ EePhyLedMode = LED_MODE_OUTPUT;
+ break;
- default:
- EePhyLedMode = LED_MODE_AUTO;
- break;
- }
- }
- if(pDevice->ChipRevId == T3_CHIP_ID_5703_A1 ||
- pDevice->ChipRevId == T3_CHIP_ID_5703_A2)
- {
- /* Enable EEPROM write protection. */
- if(Value32 & T3_NIC_EEPROM_WP)
- {
- pDevice->EepromWp = TRUE;
- }
- }
+ default:
+ EePhyLedMode = LED_MODE_AUTO;
+ break;
+ }
+ }
+ if(pDevice->ChipRevId == T3_CHIP_ID_5703_A1 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5703_A2)
+ {
+ /* Enable EEPROM write protection. */
+ if(Value32 & T3_NIC_EEPROM_WP)
+ {
+ pDevice->EepromWp = TRUE;
+ }
+ }
- /* Get the PHY Id. */
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_PHY_ID_ADDR);
- if (Value32)
- {
- EePhyId = (((Value32 & T3_NIC_PHY_ID1_MASK) >> 16) &
- PHY_ID1_OUI_MASK) << 10;
+ /* Get the PHY Id. */
+ Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_PHY_ID_ADDR);
+ if (Value32)
+ {
+ EePhyId = (((Value32 & T3_NIC_PHY_ID1_MASK) >> 16) &
+ PHY_ID1_OUI_MASK) << 10;
- Value32 = Value32 & T3_NIC_PHY_ID2_MASK;
+ Value32 = Value32 & T3_NIC_PHY_ID2_MASK;
- EePhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) |
- (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK);
- }
- else
- {
- EePhyId = 0;
- }
+ EePhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) |
+ (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK);
+ }
+ else
+ {
+ EePhyId = 0;
+ }
}
else
{
- EeSigFound = FALSE;
+ EeSigFound = FALSE;
}
/* Set the PHY address. */
@@ -1168,163 +1163,163 @@
/* Set the EnableTbi flag to false if we have a copper PHY. */
switch(pDevice->PhyId & PHY_ID_MASK)
{
- case PHY_BCM5400_PHY_ID:
- pDevice->EnableTbi = FALSE;
- break;
+ case PHY_BCM5400_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
- case PHY_BCM5401_PHY_ID:
- pDevice->EnableTbi = FALSE;
- break;
+ case PHY_BCM5401_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
- case PHY_BCM5411_PHY_ID:
- pDevice->EnableTbi = FALSE;
- break;
+ case PHY_BCM5411_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
- case PHY_BCM5701_PHY_ID:
- pDevice->EnableTbi = FALSE;
- break;
+ case PHY_BCM5701_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
- case PHY_BCM5703_PHY_ID:
- pDevice->EnableTbi = FALSE;
- break;
+ case PHY_BCM5703_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
- case PHY_BCM5704_PHY_ID:
- pDevice->EnableTbi = FALSE;
- break;
+ case PHY_BCM5704_PHY_ID:
+ pDevice->EnableTbi = FALSE;
+ break;
- case PHY_BCM8002_PHY_ID:
- pDevice->EnableTbi = TRUE;
- break;
+ case PHY_BCM8002_PHY_ID:
+ pDevice->EnableTbi = TRUE;
+ break;
- default:
+ default:
- if (pAdapterInfo)
- {
- pDevice->PhyId = pAdapterInfo->PhyId;
- pDevice->EnableTbi = pAdapterInfo->Serdes;
- }
- else if (EeSigFound)
- {
- pDevice->PhyId = EePhyId;
- pDevice->EnableTbi = EePhyTypeSerdes;
- }
- break;
+ if (pAdapterInfo)
+ {
+ pDevice->PhyId = pAdapterInfo->PhyId;
+ pDevice->EnableTbi = pAdapterInfo->Serdes;
+ }
+ else if (EeSigFound)
+ {
+ pDevice->PhyId = EePhyId;
+ pDevice->EnableTbi = EePhyTypeSerdes;
+ }
+ break;
}
/* Bail out if we don't know the copper PHY id. */
if(UNKNOWN_PHY_ID(pDevice->PhyId) && !pDevice->EnableTbi)
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)
{
- if((pDevice->SavedCacheLineReg & 0xff00) < 0x4000)
- {
- pDevice->SavedCacheLineReg &= 0xffff00ff;
- pDevice->SavedCacheLineReg |= 0x4000;
- }
+ if((pDevice->SavedCacheLineReg & 0xff00) < 0x4000)
+ {
+ pDevice->SavedCacheLineReg &= 0xffff00ff;
+ pDevice->SavedCacheLineReg |= 0x4000;
+ }
}
/* Change driver parameters. */
Status = MM_GetConfig(pDevice);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
#if INCLUDE_5701_AX_FIX
if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
{
- pDevice->ResetPhyOnInit = TRUE;
+ pDevice->ResetPhyOnInit = TRUE;
}
#endif
/* Save the current phy link status. */
if(!pDevice->EnableTbi)
{
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- /* If we don't have link reset the PHY. */
- if(!(Value32 & PHY_STATUS_LINK_PASS) || pDevice->ResetPhyOnInit)
- {
+ /* If we don't have link reset the PHY. */
+ if(!(Value32 & PHY_STATUS_LINK_PASS) || pDevice->ResetPhyOnInit)
+ {
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET);
+ LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET);
- for(j = 0; j < 100; j++)
- {
- MM_Wait(10);
+ for(j = 0; j < 100; j++)
+ {
+ MM_Wait(10);
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if(Value32 && !(Value32 & PHY_CTRL_PHY_RESET))
- {
- MM_Wait(40);
- break;
- }
- }
+ LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
+ if(Value32 && !(Value32 & PHY_CTRL_PHY_RESET))
+ {
+ MM_Wait(40);
+ break;
+ }
+ }
#if INCLUDE_5701_AX_FIX
- /* 5701_AX_BX bug: only advertises 10mb speed. */
- if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
- {
+ /* 5701_AX_BX bug: only advertises 10mb speed. */
+ if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
+ {
- Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
- PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL |
- PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
+ Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
+ PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL |
+ PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
+ Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
+ LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
- Value32 = BCM540X_AN_AD_1000BASET_HALF |
- BCM540X_AN_AD_1000BASET_FULL | BCM540X_CONFIG_AS_MASTER |
- BCM540X_ENABLE_CONFIG_AS_MASTER;
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
- pDevice->advertising1000 = Value32;
+ Value32 = BCM540X_AN_AD_1000BASET_HALF |
+ BCM540X_AN_AD_1000BASET_FULL | BCM540X_CONFIG_AS_MASTER |
+ BCM540X_ENABLE_CONFIG_AS_MASTER;
+ LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
+ pDevice->advertising1000 = Value32;
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE |
- PHY_CTRL_RESTART_AUTO_NEG);
- }
+ LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE |
+ PHY_CTRL_RESTART_AUTO_NEG);
+ }
#endif
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)
- {
- LM_WritePhy(pDevice, 0x18, 0x0c00);
- LM_WritePhy(pDevice, 0x17, 0x201f);
- LM_WritePhy(pDevice, 0x15, 0x2aaa);
- }
- if(pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
- {
- LM_WritePhy(pDevice, 0x1c, 0x8d68);
- LM_WritePhy(pDevice, 0x1c, 0x8d68);
- }
- /* Enable Ethernet@WireSpeed. */
- if(pDevice->EnableWireSpeed)
- {
- LM_WritePhy(pDevice, 0x18, 0x7007);
- LM_ReadPhy(pDevice, 0x18, &Value32);
- LM_WritePhy(pDevice, 0x18, Value32 | BIT_15 | BIT_4);
- }
- }
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)
+ {
+ LM_WritePhy(pDevice, 0x18, 0x0c00);
+ LM_WritePhy(pDevice, 0x17, 0x201f);
+ LM_WritePhy(pDevice, 0x15, 0x2aaa);
+ }
+ if(pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
+ {
+ LM_WritePhy(pDevice, 0x1c, 0x8d68);
+ LM_WritePhy(pDevice, 0x1c, 0x8d68);
+ }
+ /* Enable Ethernet@WireSpeed. */
+ if(pDevice->EnableWireSpeed)
+ {
+ LM_WritePhy(pDevice, 0x18, 0x7007);
+ LM_ReadPhy(pDevice, 0x18, &Value32);
+ LM_WritePhy(pDevice, 0x18, Value32 | BIT_15 | BIT_4);
+ }
+ }
}
/* Turn off tap power management. */
if((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
{
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
+ LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
- MM_Wait(40);
+ MM_Wait(40);
}
#if INCLUDE_TBI_SUPPORT
@@ -1332,110 +1327,110 @@
if(pDevice->EnableTbi)
{
- pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE;
- pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
- if ((pDevice->PollTbiLink == BAD_DEFAULT_VALUE) ||
- pDevice->DisableAutoNeg)
- {
- pDevice->PollTbiLink = FALSE;
- }
+ pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE;
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
+ if ((pDevice->PollTbiLink == BAD_DEFAULT_VALUE) ||
+ pDevice->DisableAutoNeg)
+ {
+ pDevice->PollTbiLink = FALSE;
+ }
}
else
{
- pDevice->PollTbiLink = FALSE;
+ pDevice->PollTbiLink = FALSE;
}
#endif /* INCLUDE_TBI_SUPPORT */
/* UseTaggedStatus is only valid for 5701 and later. */
if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
{
- pDevice->UseTaggedStatus = FALSE;
+ pDevice->UseTaggedStatus = FALSE;
- pDevice->CoalesceMode = 0;
+ pDevice->CoalesceMode = 0;
}
else
{
- pDevice->CoalesceMode = HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT |
- HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT;
+ pDevice->CoalesceMode = HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT |
+ HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT;
}
/* Set the status block size. */
if(T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5700_AX &&
- T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5700_BX)
+ T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5700_BX)
{
- pDevice->CoalesceMode |= HOST_COALESCE_32_BYTE_STATUS_MODE;
+ pDevice->CoalesceMode |= HOST_COALESCE_32_BYTE_STATUS_MODE;
}
/* Check the DURING_INT coalescing ticks parameters. */
if(pDevice->UseTaggedStatus)
{
- if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->RxCoalescingTicksDuringInt =
- DEFAULT_RX_COALESCING_TICKS_DURING_INT;
- }
+ if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
+ {
+ pDevice->RxCoalescingTicksDuringInt =
+ DEFAULT_RX_COALESCING_TICKS_DURING_INT;
+ }
- if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->TxCoalescingTicksDuringInt =
- DEFAULT_TX_COALESCING_TICKS_DURING_INT;
- }
+ if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
+ {
+ pDevice->TxCoalescingTicksDuringInt =
+ DEFAULT_TX_COALESCING_TICKS_DURING_INT;
+ }
- if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->RxMaxCoalescedFramesDuringInt =
- DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT;
- }
+ if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
+ {
+ pDevice->RxMaxCoalescedFramesDuringInt =
+ DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT;
+ }
- if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->TxMaxCoalescedFramesDuringInt =
- DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT;
- }
+ if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
+ {
+ pDevice->TxMaxCoalescedFramesDuringInt =
+ DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT;
+ }
}
else
{
- if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->RxCoalescingTicksDuringInt = 0;
- }
+ if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
+ {
+ pDevice->RxCoalescingTicksDuringInt = 0;
+ }
- if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->TxCoalescingTicksDuringInt = 0;
- }
+ if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
+ {
+ pDevice->TxCoalescingTicksDuringInt = 0;
+ }
- if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->RxMaxCoalescedFramesDuringInt = 0;
- }
+ if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
+ {
+ pDevice->RxMaxCoalescedFramesDuringInt = 0;
+ }
- if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->TxMaxCoalescedFramesDuringInt = 0;
- }
+ if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
+ {
+ pDevice->TxMaxCoalescedFramesDuringInt = 0;
+ }
}
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
if(pDevice->RxMtu <= (MAX_STD_RCV_BUFFER_SIZE - 8 /* CRC */))
{
- pDevice->RxJumboDescCnt = 0;
- if(pDevice->RxMtu <= MAX_ETHERNET_PACKET_SIZE_NO_CRC)
- {
- pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
- }
+ pDevice->RxJumboDescCnt = 0;
+ if(pDevice->RxMtu <= MAX_ETHERNET_PACKET_SIZE_NO_CRC)
+ {
+ pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
+ }
}
else
{
- pDevice->RxJumboBufferSize = (pDevice->RxMtu + 8 /* CRC + VLAN */ +
- COMMON_CACHE_LINE_SIZE-1) & ~COMMON_CACHE_LINE_MASK;
+ pDevice->RxJumboBufferSize = (pDevice->RxMtu + 8 /* CRC + VLAN */ +
+ COMMON_CACHE_LINE_SIZE-1) & ~COMMON_CACHE_LINE_MASK;
- if(pDevice->RxJumboBufferSize > MAX_JUMBO_RCV_BUFFER_SIZE)
- {
- pDevice->RxJumboBufferSize = DEFAULT_JUMBO_RCV_BUFFER_SIZE;
- pDevice->RxMtu = pDevice->RxJumboBufferSize - 8 /* CRC + VLAN */;
- }
- pDevice->TxMtu = pDevice->RxMtu;
+ if(pDevice->RxJumboBufferSize > MAX_JUMBO_RCV_BUFFER_SIZE)
+ {
+ pDevice->RxJumboBufferSize = DEFAULT_JUMBO_RCV_BUFFER_SIZE;
+ pDevice->RxMtu = pDevice->RxJumboBufferSize - 8 /* CRC + VLAN */;
+ }
+ pDevice->TxMtu = pDevice->RxMtu;
}
#else
@@ -1444,128 +1439,128 @@
pDevice->RxPacketDescCnt =
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- pDevice->RxJumboDescCnt +
+ pDevice->RxJumboDescCnt +
#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
- pDevice->RxStdDescCnt;
+ pDevice->RxStdDescCnt;
if(pDevice->TxMtu < MAX_ETHERNET_PACKET_SIZE_NO_CRC)
{
- pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
+ pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
}
if(pDevice->TxMtu > MAX_JUMBO_TX_BUFFER_SIZE)
{
- pDevice->TxMtu = MAX_JUMBO_TX_BUFFER_SIZE;
+ pDevice->TxMtu = MAX_JUMBO_TX_BUFFER_SIZE;
}
/* Configure the proper ways to get link change interrupt. */
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO)
{
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
- }
- else
- {
- pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
- }
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
+ {
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
+ }
+ else
+ {
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
+ }
}
else if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
{
- /* Auto-polling does not work on 5700_AX and 5700_BX. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
- }
+ /* Auto-polling does not work on 5700_AX and 5700_BX. */
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
+ {
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
+ }
}
/* Determine the method to get link change status. */
if(pDevice->LinkChngMode == T3_LINK_CHNG_MODE_AUTO)
{
- /* The link status bit in the status block does not work on 5700_AX */
- /* and 5700_BX chips. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
- }
- else
- {
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_BLOCK;
- }
+ /* The link status bit in the status block does not work on 5700_AX */
+ /* and 5700_BX chips. */
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
+ {
+ pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
+ }
+ else
+ {
+ pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_BLOCK;
+ }
}
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
{
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
+ pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
}
/* Configure PHY led mode. */
if(pDevice->LedMode == LED_MODE_AUTO)
{
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- if(pDevice->SubsystemVendorId == T3_SVID_DELL)
- {
- pDevice->LedMode = LED_MODE_LINK10;
- }
- else
- {
- pDevice->LedMode = LED_MODE_THREE_LINK;
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ if(pDevice->SubsystemVendorId == T3_SVID_DELL)
+ {
+ pDevice->LedMode = LED_MODE_LINK10;
+ }
+ else
+ {
+ pDevice->LedMode = LED_MODE_THREE_LINK;
- if(EeSigFound && EePhyLedMode != LED_MODE_AUTO)
- {
- pDevice->LedMode = EePhyLedMode;
- }
- }
+ if(EeSigFound && EePhyLedMode != LED_MODE_AUTO)
+ {
+ pDevice->LedMode = EePhyLedMode;
+ }
+ }
- /* bug? 5701 in LINK10 mode does not seem to work when */
- /* PhyIntMode is LINK_READY. */
- if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
+ /* bug? 5701 in LINK10 mode does not seem to work when */
+ /* PhyIntMode is LINK_READY. */
+ if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
#if INCLUDE_TBI_SUPPORT
- pDevice->EnableTbi == FALSE &&
+ pDevice->EnableTbi == FALSE &&
#endif
- pDevice->LedMode == LED_MODE_LINK10)
- {
- pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
- }
+ pDevice->LedMode == LED_MODE_LINK10)
+ {
+ pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
+ pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
+ }
- if(pDevice->EnableTbi)
- {
- pDevice->LedMode = LED_MODE_THREE_LINK;
- }
- }
- else
- {
- if(EeSigFound && EePhyLedMode != LED_MODE_AUTO)
- {
- pDevice->LedMode = EePhyLedMode;
- }
- else
- {
- pDevice->LedMode = LED_MODE_OPEN_DRAIN;
- }
- }
+ if(pDevice->EnableTbi)
+ {
+ pDevice->LedMode = LED_MODE_THREE_LINK;
+ }
+ }
+ else
+ {
+ if(EeSigFound && EePhyLedMode != LED_MODE_AUTO)
+ {
+ pDevice->LedMode = EePhyLedMode;
+ }
+ else
+ {
+ pDevice->LedMode = LED_MODE_OPEN_DRAIN;
+ }
+ }
}
/* Enable OneDmaAtOnce. */
if(pDevice->OneDmaAtOnce == BAD_DEFAULT_VALUE)
{
- pDevice->OneDmaAtOnce = FALSE;
+ pDevice->OneDmaAtOnce = FALSE;
}
if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B2)
+ pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B2)
{
- pDevice->WolSpeed = WOL_SPEED_10MB;
+ pDevice->WolSpeed = WOL_SPEED_10MB;
}
else
{
- pDevice->WolSpeed = WOL_SPEED_100MB;
+ pDevice->WolSpeed = WOL_SPEED_100MB;
}
/* Offloadings. */
@@ -1574,8 +1569,8 @@
/* Turn off task offloading on Ax. */
if(pDevice->ChipRevId == T3_CHIP_ID_5700_B0)
{
- pDevice->TaskOffloadCap &= ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_TX_UDP_CHECKSUM);
+ pDevice->TaskOffloadCap &= ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
+ LM_TASK_OFFLOAD_TX_UDP_CHECKSUM);
}
pDevice->PciState = REG_RD(pDevice, PciCfg.PciState);
LM_ReadVPD(pDevice);
@@ -1592,44 +1587,44 @@
{
static LM_ADAPTER_INFO AdapterArr[] =
{
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A6, PHY_BCM5401_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A5, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700T6, PHY_BCM8002_PHY_ID, 1},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A9, 0, 1 },
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T1, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T8, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A7, 0, 1},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A10, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A12, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax1, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax2, PHY_BCM5701_PHY_ID, 0},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A6, PHY_BCM5401_PHY_ID, 0},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A5, PHY_BCM5701_PHY_ID, 0},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700T6, PHY_BCM8002_PHY_ID, 1},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A9, 0, 1 },
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T1, PHY_BCM5701_PHY_ID, 0},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T8, PHY_BCM5701_PHY_ID, 0},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A7, 0, 1},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A10, PHY_BCM5701_PHY_ID, 0},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A12, PHY_BCM5701_PHY_ID, 0},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax1, PHY_BCM5701_PHY_ID, 0},
+ { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax2, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_3COM, T3_SSID_3COM_3C996T, PHY_BCM5401_PHY_ID, 0 },
- { T3_SVID_3COM, T3_SSID_3COM_3C996BT, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_3COM, T3_SSID_3COM_3C996SX, 0, 1 },
- { T3_SVID_3COM, T3_SSID_3COM_3C1000T, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_3COM, T3_SSID_3COM_3C940BR01, PHY_BCM5701_PHY_ID, 0 },
+ { T3_SVID_3COM, T3_SSID_3COM_3C996T, PHY_BCM5401_PHY_ID, 0 },
+ { T3_SVID_3COM, T3_SSID_3COM_3C996BT, PHY_BCM5701_PHY_ID, 0 },
+ { T3_SVID_3COM, T3_SSID_3COM_3C996SX, 0, 1 },
+ { T3_SVID_3COM, T3_SSID_3COM_3C1000T, PHY_BCM5701_PHY_ID, 0 },
+ { T3_SVID_3COM, T3_SSID_3COM_3C940BR01, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_DELL, T3_SSID_DELL_VIPER, PHY_BCM5401_PHY_ID, 0 },
- { T3_SVID_DELL, T3_SSID_DELL_JAGUAR, PHY_BCM5401_PHY_ID, 0 },
- { T3_SVID_DELL, T3_SSID_DELL_MERLOT, PHY_BCM5411_PHY_ID, 0 },
- { T3_SVID_DELL, T3_SSID_DELL_SLIM_MERLOT, PHY_BCM5411_PHY_ID, 0 },
+ { T3_SVID_DELL, T3_SSID_DELL_VIPER, PHY_BCM5401_PHY_ID, 0 },
+ { T3_SVID_DELL, T3_SSID_DELL_JAGUAR, PHY_BCM5401_PHY_ID, 0 },
+ { T3_SVID_DELL, T3_SSID_DELL_MERLOT, PHY_BCM5411_PHY_ID, 0 },
+ { T3_SVID_DELL, T3_SSID_DELL_SLIM_MERLOT, PHY_BCM5411_PHY_ID, 0 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE_2, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_CHANGELING, 0, 1 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780_2, PHY_BCM5701_PHY_ID, 0 },
+ { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE, PHY_BCM5701_PHY_ID, 0 },
+ { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE_2, PHY_BCM5701_PHY_ID, 0 },
+ { T3_SVID_COMPAQ, T3_SSID_COMPAQ_CHANGELING, 0, 1 },
+ { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780, PHY_BCM5701_PHY_ID, 0 },
+ { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780_2, PHY_BCM5701_PHY_ID, 0 },
};
LM_UINT32 j;
for(j = 0; j < sizeof(AdapterArr)/sizeof(LM_ADAPTER_INFO); j++)
{
- if(AdapterArr[j].Svid == Svid && AdapterArr[j].Ssid == Ssid)
- {
- return &AdapterArr[j];
- }
+ if(AdapterArr[j].Svid == Svid && AdapterArr[j].Ssid == Ssid)
+ {
+ return &AdapterArr[j];
+ }
}
return NULL;
@@ -1659,9 +1654,9 @@
/* Intialize the queues. */
QQ_InitQueue(&pDevice->RxPacketReceivedQ.Container,
- MAX_RX_PACKET_DESC_COUNT);
+ MAX_RX_PACKET_DESC_COUNT);
QQ_InitQueue(&pDevice->RxPacketFreeQ.Container,
- MAX_RX_PACKET_DESC_COUNT);
+ MAX_RX_PACKET_DESC_COUNT);
QQ_InitQueue(&pDevice->TxPacketFreeQ.Container,MAX_TX_PACKET_DESC_COUNT);
QQ_InitQueue(&pDevice->TxPacketActiveQ.Container,MAX_TX_PACKET_DESC_COUNT);
@@ -1670,60 +1665,60 @@
/* Allocate shared memory for: status block, the buffers for receive */
/* rings -- standard, mini, jumbo, and return rings. */
Size = T3_STATUS_BLOCK_SIZE + sizeof(T3_STATS_BLOCK) +
- T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) +
+ T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) +
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) +
+ T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) +
#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
- T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD);
+ T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD);
/* Memory for host based Send BD. */
if(pDevice->NicSendBd == FALSE)
{
- Size += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
+ Size += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
}
/* Allocate the memory block. */
Status = MM_AllocateSharedMemory(pDevice, Size, (PLM_VOID) &pMemVirt, &MemPhy, FALSE);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
/* Program DMA Read/Write */
if (pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS)
{
- pDevice->DmaReadWriteCtrl = 0x763f000f;
+ pDevice->DmaReadWriteCtrl = 0x763f000f;
}
else
{
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)
- {
- pDevice->DmaReadWriteCtrl = 0x761f0000;
- }
- else
- {
- pDevice->DmaReadWriteCtrl = 0x761b000f;
- }
- if(pDevice->ChipRevId == T3_CHIP_ID_5703_A1 ||
- pDevice->ChipRevId == T3_CHIP_ID_5703_A2)
- {
- pDevice->OneDmaAtOnce = TRUE;
- }
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)
+ {
+ pDevice->DmaReadWriteCtrl = 0x761f0000;
+ }
+ else
+ {
+ pDevice->DmaReadWriteCtrl = 0x761b000f;
+ }
+ if(pDevice->ChipRevId == T3_CHIP_ID_5703_A1 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5703_A2)
+ {
+ pDevice->OneDmaAtOnce = TRUE;
+ }
}
if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)
{
- pDevice->DmaReadWriteCtrl &= 0xfffffff0;
+ pDevice->DmaReadWriteCtrl &= 0xfffffff0;
}
if(pDevice->OneDmaAtOnce)
{
- pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_ONE_DMA_AT_ONCE;
+ pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_ONE_DMA_AT_ONCE;
}
REG_WR(pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl);
if (LM_DmaTest(pDevice, pMemVirt, MemPhy, 0x400) != LM_STATUS_SUCCESS)
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
/* Status block. */
@@ -1744,7 +1739,7 @@
pMemVirt += T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD);
LM_INC_PHYSICAL_ADDRESS(&MemPhy,
- T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD));
+ T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD));
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
/* Receive jumbo BD buffer. */
@@ -1753,7 +1748,7 @@
pMemVirt += T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD);
LM_INC_PHYSICAL_ADDRESS(&MemPhy,
- T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD));
+ T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD));
#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
/* Receive return BD buffer. */
@@ -1762,33 +1757,33 @@
pMemVirt += T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD);
LM_INC_PHYSICAL_ADDRESS(&MemPhy,
- T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD));
+ T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD));
/* Set up Send BD. */
if(pDevice->NicSendBd == FALSE)
{
- pDevice->pSendBdVirt = (PT3_SND_BD) pMemVirt;
- pDevice->SendBdPhy = MemPhy;
+ pDevice->pSendBdVirt = (PT3_SND_BD) pMemVirt;
+ pDevice->SendBdPhy = MemPhy;
- pMemVirt += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
- LM_INC_PHYSICAL_ADDRESS(&MemPhy,
- sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT);
+ pMemVirt += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
+ LM_INC_PHYSICAL_ADDRESS(&MemPhy,
+ sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT);
}
else
{
- pDevice->pSendBdVirt = (PT3_SND_BD)
- pDevice->pMemView->uIntMem.First32k.BufferDesc;
- pDevice->SendBdPhy.High = 0;
- pDevice->SendBdPhy.Low = T3_NIC_SND_BUFFER_DESC_ADDR;
+ pDevice->pSendBdVirt = (PT3_SND_BD)
+ pDevice->pMemView->uIntMem.First32k.BufferDesc;
+ pDevice->SendBdPhy.High = 0;
+ pDevice->SendBdPhy.Low = T3_NIC_SND_BUFFER_DESC_ADDR;
}
/* Allocate memory for packet descriptors. */
Size = (pDevice->RxPacketDescCnt +
- pDevice->TxPacketDescCnt) * MM_PACKET_DESC_SIZE;
+ pDevice->TxPacketDescCnt) * MM_PACKET_DESC_SIZE;
Status = MM_AllocateMemory(pDevice, Size, (PLM_VOID *) &pPacket);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
pDevice->pPacketDescBase = (PLM_VOID) pPacket;
@@ -1796,54 +1791,54 @@
/* to the TxPacketFreeQ for each send ring. */
for(j = 0; j < pDevice->TxPacketDescCnt; j++)
{
- /* Ring index. */
- pPacket->Flags = 0;
+ /* Ring index. */
+ pPacket->Flags = 0;
- /* Queue the descriptor in the TxPacketFreeQ of the 'k' ring. */
- QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket);
+ /* Queue the descriptor in the TxPacketFreeQ of the 'k' ring. */
+ QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket);
- /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
- /* is the total size of the packet descriptor including the */
- /* os-specific extensions in the UM_PACKET structure. */
- pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
+ /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
+ /* is the total size of the packet descriptor including the */
+ /* os-specific extensions in the UM_PACKET structure. */
+ pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
} /* for(j.. */
/* Create receive packet descriptors from the memory block and add them */
/* to the RxPacketFreeQ. Create the Standard packet descriptors. */
for(j = 0; j < pDevice->RxStdDescCnt; j++)
{
- /* Receive producer ring. */
- pPacket->u.Rx.RcvProdRing = T3_STD_RCV_PROD_RING;
+ /* Receive producer ring. */
+ pPacket->u.Rx.RcvProdRing = T3_STD_RCV_PROD_RING;
- /* Receive buffer size. */
- pPacket->u.Rx.RxBufferSize = MAX_STD_RCV_BUFFER_SIZE;
+ /* Receive buffer size. */
+ pPacket->u.Rx.RxBufferSize = MAX_STD_RCV_BUFFER_SIZE;
- /* Add the descriptor to RxPacketFreeQ. */
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ /* Add the descriptor to RxPacketFreeQ. */
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
- /* is the total size of the packet descriptor including the */
- /* os-specific extensions in the UM_PACKET structure. */
- pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
+ /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
+ /* is the total size of the packet descriptor including the */
+ /* os-specific extensions in the UM_PACKET structure. */
+ pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
} /* for */
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
/* Create the Jumbo packet descriptors. */
for(j = 0; j < pDevice->RxJumboDescCnt; j++)
{
- /* Receive producer ring. */
- pPacket->u.Rx.RcvProdRing = T3_JUMBO_RCV_PROD_RING;
+ /* Receive producer ring. */
+ pPacket->u.Rx.RcvProdRing = T3_JUMBO_RCV_PROD_RING;
- /* Receive buffer size. */
- pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize;
+ /* Receive buffer size. */
+ pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize;
- /* Add the descriptor to RxPacketFreeQ. */
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ /* Add the descriptor to RxPacketFreeQ. */
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
- /* is the total size of the packet descriptor including the */
- /* os-specific extensions in the UM_PACKET structure. */
- pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
+ /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
+ /* is the total size of the packet descriptor including the */
+ /* os-specific extensions in the UM_PACKET structure. */
+ pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
} /* for */
#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
@@ -1851,12 +1846,12 @@
Status = MM_InitializeUmPackets(pDevice);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
} /* if */
/* Default receive mask. */
pDevice->ReceiveMask = LM_ACCEPT_MULTICAST | LM_ACCEPT_BROADCAST |
- LM_ACCEPT_UNICAST;
+ LM_ACCEPT_UNICAST;
/* Make sure we are in the first 32k memory window or NicSendBd. */
REG_WR(pDevice, PciCfg.MemWindowBaseAddr, 0);
@@ -1865,7 +1860,7 @@
Status = LM_ResetAdapter(pDevice);
if(Status != LM_STATUS_SUCCESS)
{
- return Status;
+ return Status;
}
/* We are done with initialization. */
@@ -1875,7 +1870,6 @@
} /* LM_InitializeAdapter */
-
/******************************************************************************/
/* Description: */
/* This function Enables/Disables a given block. */
@@ -1896,399 +1890,399 @@
for(i = 0 ; i < 32; i++)
{
- if(!(mask & (1 << i)))
- continue;
+ if(!(mask & (1 << i)))
+ continue;
- switch (1 << i)
- {
- case T3_BLOCK_DMA_RD:
- data = REG_RD(pDevice, DmaRead.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~DMA_READ_MODE_ENABLE;
- REG_WR(pDevice, DmaRead.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, DmaRead.Mode) & DMA_READ_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, DmaRead.Mode, data | DMA_READ_MODE_ENABLE);
- break;
+ switch (1 << i)
+ {
+ case T3_BLOCK_DMA_RD:
+ data = REG_RD(pDevice, DmaRead.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~DMA_READ_MODE_ENABLE;
+ REG_WR(pDevice, DmaRead.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, DmaRead.Mode) & DMA_READ_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, DmaRead.Mode, data | DMA_READ_MODE_ENABLE);
+ break;
- case T3_BLOCK_DMA_COMP:
- data = REG_RD(pDevice,DmaComp.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~DMA_COMP_MODE_ENABLE;
- REG_WR(pDevice, DmaComp.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, DmaComp.Mode) & DMA_COMP_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, DmaComp.Mode, data | DMA_COMP_MODE_ENABLE);
- break;
+ case T3_BLOCK_DMA_COMP:
+ data = REG_RD(pDevice,DmaComp.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~DMA_COMP_MODE_ENABLE;
+ REG_WR(pDevice, DmaComp.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, DmaComp.Mode) & DMA_COMP_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, DmaComp.Mode, data | DMA_COMP_MODE_ENABLE);
+ break;
- case T3_BLOCK_RX_BD_INITIATOR:
- data = REG_RD(pDevice, RcvBdIn.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~RCV_BD_IN_MODE_ENABLE;
- REG_WR(pDevice, RcvBdIn.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, RcvBdIn.Mode) & RCV_BD_IN_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, RcvBdIn.Mode,data | RCV_BD_IN_MODE_ENABLE);
- break;
+ case T3_BLOCK_RX_BD_INITIATOR:
+ data = REG_RD(pDevice, RcvBdIn.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~RCV_BD_IN_MODE_ENABLE;
+ REG_WR(pDevice, RcvBdIn.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, RcvBdIn.Mode) & RCV_BD_IN_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, RcvBdIn.Mode,data | RCV_BD_IN_MODE_ENABLE);
+ break;
- case T3_BLOCK_RX_BD_COMP:
- data = REG_RD(pDevice, RcvBdComp.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~RCV_BD_COMP_MODE_ENABLE;
- REG_WR(pDevice, RcvBdComp.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, RcvBdComp.Mode) & RCV_BD_COMP_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, RcvBdComp.Mode,data | RCV_BD_COMP_MODE_ENABLE);
- break;
+ case T3_BLOCK_RX_BD_COMP:
+ data = REG_RD(pDevice, RcvBdComp.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~RCV_BD_COMP_MODE_ENABLE;
+ REG_WR(pDevice, RcvBdComp.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, RcvBdComp.Mode) & RCV_BD_COMP_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, RcvBdComp.Mode,data | RCV_BD_COMP_MODE_ENABLE);
+ break;
- case T3_BLOCK_DMA_WR:
- data = REG_RD(pDevice, DmaWrite.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~DMA_WRITE_MODE_ENABLE;
- REG_WR(pDevice, DmaWrite.Mode,data);
+ case T3_BLOCK_DMA_WR:
+ data = REG_RD(pDevice, DmaWrite.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~DMA_WRITE_MODE_ENABLE;
+ REG_WR(pDevice, DmaWrite.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, DmaWrite.Mode) & DMA_WRITE_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, DmaWrite.Mode,data | DMA_WRITE_MODE_ENABLE);
- break;
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, DmaWrite.Mode) & DMA_WRITE_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, DmaWrite.Mode,data | DMA_WRITE_MODE_ENABLE);
+ break;
- case T3_BLOCK_MSI_HANDLER:
- data = REG_RD(pDevice, Msi.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~MSI_MODE_ENABLE;
- REG_WR(pDevice, Msi.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, Msi.Mode) & MSI_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, Msi.Mode, data |MSI_MODE_ENABLE);
- break;
+ case T3_BLOCK_MSI_HANDLER:
+ data = REG_RD(pDevice, Msi.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~MSI_MODE_ENABLE;
+ REG_WR(pDevice, Msi.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, Msi.Mode) & MSI_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, Msi.Mode, data |MSI_MODE_ENABLE);
+ break;
- case T3_BLOCK_RX_LIST_PLMT:
- data = REG_RD(pDevice, RcvListPlmt.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~RCV_LIST_PLMT_MODE_ENABLE;
- REG_WR(pDevice, RcvListPlmt.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, RcvListPlmt.Mode) & RCV_LIST_PLMT_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, RcvListPlmt.Mode,data | RCV_LIST_PLMT_MODE_ENABLE);
- break;
+ case T3_BLOCK_RX_LIST_PLMT:
+ data = REG_RD(pDevice, RcvListPlmt.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~RCV_LIST_PLMT_MODE_ENABLE;
+ REG_WR(pDevice, RcvListPlmt.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, RcvListPlmt.Mode) & RCV_LIST_PLMT_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, RcvListPlmt.Mode,data | RCV_LIST_PLMT_MODE_ENABLE);
+ break;
- case T3_BLOCK_RX_LIST_SELECTOR:
- data = REG_RD(pDevice, RcvListSel.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~RCV_LIST_SEL_MODE_ENABLE;
- REG_WR(pDevice, RcvListSel.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, RcvListSel.Mode) & RCV_LIST_SEL_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, RcvListSel.Mode,data |RCV_LIST_SEL_MODE_ENABLE);
- break;
+ case T3_BLOCK_RX_LIST_SELECTOR:
+ data = REG_RD(pDevice, RcvListSel.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~RCV_LIST_SEL_MODE_ENABLE;
+ REG_WR(pDevice, RcvListSel.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, RcvListSel.Mode) & RCV_LIST_SEL_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, RcvListSel.Mode,data |RCV_LIST_SEL_MODE_ENABLE);
+ break;
- case T3_BLOCK_RX_DATA_INITIATOR:
- data = REG_RD(pDevice, RcvDataBdIn.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~RCV_DATA_BD_IN_MODE_ENABLE;
- REG_WR(pDevice, RcvDataBdIn.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_BD_IN_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, RcvDataBdIn.Mode, data | RCV_DATA_BD_IN_MODE_ENABLE);
- break;
+ case T3_BLOCK_RX_DATA_INITIATOR:
+ data = REG_RD(pDevice, RcvDataBdIn.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~RCV_DATA_BD_IN_MODE_ENABLE;
+ REG_WR(pDevice, RcvDataBdIn.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_BD_IN_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, RcvDataBdIn.Mode, data | RCV_DATA_BD_IN_MODE_ENABLE);
+ break;
- case T3_BLOCK_RX_DATA_COMP:
- data = REG_RD(pDevice, RcvDataComp.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~RCV_DATA_COMP_MODE_ENABLE;
- REG_WR(pDevice, RcvDataComp.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_COMP_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, RcvDataComp.Mode,data | RCV_DATA_COMP_MODE_ENABLE);
- break;
+ case T3_BLOCK_RX_DATA_COMP:
+ data = REG_RD(pDevice, RcvDataComp.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~RCV_DATA_COMP_MODE_ENABLE;
+ REG_WR(pDevice, RcvDataComp.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_COMP_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, RcvDataComp.Mode,data | RCV_DATA_COMP_MODE_ENABLE);
+ break;
- case T3_BLOCK_HOST_COALESING:
- data = REG_RD(pDevice, HostCoalesce.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~HOST_COALESCE_ENABLE;
- REG_WR(pDevice, HostCoalesce.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, SndBdIn.Mode) & HOST_COALESCE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, HostCoalesce.Mode, data | HOST_COALESCE_ENABLE);
- break;
+ case T3_BLOCK_HOST_COALESING:
+ data = REG_RD(pDevice, HostCoalesce.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~HOST_COALESCE_ENABLE;
+ REG_WR(pDevice, HostCoalesce.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, SndBdIn.Mode) & HOST_COALESCE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, HostCoalesce.Mode, data | HOST_COALESCE_ENABLE);
+ break;
- case T3_BLOCK_MAC_RX_ENGINE:
- if(cntrl == LM_DISABLE)
- {
- pDevice->RxMode &= ~RX_MODE_ENABLE;
- REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, MacCtrl.RxMode) & RX_MODE_ENABLE))
- {
- break;
- }
- MM_Wait(10);
- }
- }
- else
- {
- pDevice->RxMode |= RX_MODE_ENABLE;
- REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
- }
- break;
+ case T3_BLOCK_MAC_RX_ENGINE:
+ if(cntrl == LM_DISABLE)
+ {
+ pDevice->RxMode &= ~RX_MODE_ENABLE;
+ REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, MacCtrl.RxMode) & RX_MODE_ENABLE))
+ {
+ break;
+ }
+ MM_Wait(10);
+ }
+ }
+ else
+ {
+ pDevice->RxMode |= RX_MODE_ENABLE;
+ REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
+ }
+ break;
- case T3_BLOCK_MBUF_CLUSTER_FREE:
- data = REG_RD(pDevice, MbufClusterFree.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~MBUF_CLUSTER_FREE_MODE_ENABLE;
- REG_WR(pDevice, MbufClusterFree.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, MbufClusterFree.Mode) & MBUF_CLUSTER_FREE_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, MbufClusterFree.Mode, data | MBUF_CLUSTER_FREE_MODE_ENABLE);
- break;
+ case T3_BLOCK_MBUF_CLUSTER_FREE:
+ data = REG_RD(pDevice, MbufClusterFree.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~MBUF_CLUSTER_FREE_MODE_ENABLE;
+ REG_WR(pDevice, MbufClusterFree.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, MbufClusterFree.Mode) & MBUF_CLUSTER_FREE_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, MbufClusterFree.Mode, data | MBUF_CLUSTER_FREE_MODE_ENABLE);
+ break;
- case T3_BLOCK_SEND_BD_INITIATOR:
- data = REG_RD(pDevice, SndBdIn.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~SND_BD_IN_MODE_ENABLE;
- REG_WR(pDevice, SndBdIn.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, SndBdIn.Mode) & SND_BD_IN_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, SndBdIn.Mode, data | SND_BD_IN_MODE_ENABLE);
- break;
+ case T3_BLOCK_SEND_BD_INITIATOR:
+ data = REG_RD(pDevice, SndBdIn.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~SND_BD_IN_MODE_ENABLE;
+ REG_WR(pDevice, SndBdIn.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, SndBdIn.Mode) & SND_BD_IN_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, SndBdIn.Mode, data | SND_BD_IN_MODE_ENABLE);
+ break;
- case T3_BLOCK_SEND_BD_COMP:
- data = REG_RD(pDevice, SndBdComp.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~SND_BD_COMP_MODE_ENABLE;
- REG_WR(pDevice, SndBdComp.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, SndBdComp.Mode) & SND_BD_COMP_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, SndBdComp.Mode, data | SND_BD_COMP_MODE_ENABLE);
- break;
+ case T3_BLOCK_SEND_BD_COMP:
+ data = REG_RD(pDevice, SndBdComp.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~SND_BD_COMP_MODE_ENABLE;
+ REG_WR(pDevice, SndBdComp.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, SndBdComp.Mode) & SND_BD_COMP_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, SndBdComp.Mode, data | SND_BD_COMP_MODE_ENABLE);
+ break;
- case T3_BLOCK_SEND_BD_SELECTOR:
- data = REG_RD(pDevice, SndBdSel.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~SND_BD_SEL_MODE_ENABLE;
- REG_WR(pDevice, SndBdSel.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, SndBdSel.Mode) & SND_BD_SEL_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, SndBdSel.Mode, data | SND_BD_SEL_MODE_ENABLE);
- break;
+ case T3_BLOCK_SEND_BD_SELECTOR:
+ data = REG_RD(pDevice, SndBdSel.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~SND_BD_SEL_MODE_ENABLE;
+ REG_WR(pDevice, SndBdSel.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, SndBdSel.Mode) & SND_BD_SEL_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, SndBdSel.Mode, data | SND_BD_SEL_MODE_ENABLE);
+ break;
- case T3_BLOCK_SEND_DATA_INITIATOR:
- data = REG_RD(pDevice, SndDataIn.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~T3_SND_DATA_IN_MODE_ENABLE;
- REG_WR(pDevice, SndDataIn.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, SndDataIn.Mode) & T3_SND_DATA_IN_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, SndDataIn.Mode,data | T3_SND_DATA_IN_MODE_ENABLE);
- break;
+ case T3_BLOCK_SEND_DATA_INITIATOR:
+ data = REG_RD(pDevice, SndDataIn.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~T3_SND_DATA_IN_MODE_ENABLE;
+ REG_WR(pDevice, SndDataIn.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, SndDataIn.Mode) & T3_SND_DATA_IN_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, SndDataIn.Mode,data | T3_SND_DATA_IN_MODE_ENABLE);
+ break;
- case T3_BLOCK_SEND_DATA_COMP:
- data = REG_RD(pDevice, SndDataComp.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~SND_DATA_COMP_MODE_ENABLE;
- REG_WR(pDevice, SndDataComp.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, SndDataComp.Mode) & SND_DATA_COMP_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, SndDataComp.Mode,data | SND_DATA_COMP_MODE_ENABLE);
- break;
+ case T3_BLOCK_SEND_DATA_COMP:
+ data = REG_RD(pDevice, SndDataComp.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~SND_DATA_COMP_MODE_ENABLE;
+ REG_WR(pDevice, SndDataComp.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, SndDataComp.Mode) & SND_DATA_COMP_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, SndDataComp.Mode,data | SND_DATA_COMP_MODE_ENABLE);
+ break;
- case T3_BLOCK_MAC_TX_ENGINE:
- if(cntrl == LM_DISABLE)
- {
- pDevice->TxMode &= ~TX_MODE_ENABLE;
- REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, MacCtrl.TxMode) & TX_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- {
- pDevice->TxMode |= TX_MODE_ENABLE;
- REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode);
- }
- break;
+ case T3_BLOCK_MAC_TX_ENGINE:
+ if(cntrl == LM_DISABLE)
+ {
+ pDevice->TxMode &= ~TX_MODE_ENABLE;
+ REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, MacCtrl.TxMode) & TX_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ {
+ pDevice->TxMode |= TX_MODE_ENABLE;
+ REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode);
+ }
+ break;
- case T3_BLOCK_MEM_ARBITOR:
- data = REG_RD(pDevice, MemArbiter.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~T3_MEM_ARBITER_MODE_ENABLE;
- REG_WR(pDevice, MemArbiter.Mode, data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, MemArbiter.Mode) & T3_MEM_ARBITER_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, MemArbiter.Mode,data|T3_MEM_ARBITER_MODE_ENABLE);
- break;
+ case T3_BLOCK_MEM_ARBITOR:
+ data = REG_RD(pDevice, MemArbiter.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~T3_MEM_ARBITER_MODE_ENABLE;
+ REG_WR(pDevice, MemArbiter.Mode, data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, MemArbiter.Mode) & T3_MEM_ARBITER_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, MemArbiter.Mode,data|T3_MEM_ARBITER_MODE_ENABLE);
+ break;
- case T3_BLOCK_MBUF_MANAGER:
- data = REG_RD(pDevice, BufMgr.Mode);
- if (cntrl == LM_DISABLE)
- {
- data &= ~BUFMGR_MODE_ENABLE;
- REG_WR(pDevice, BufMgr.Mode,data);
- for(j = 0; j < MaxWaitCnt; j++)
- {
- if(!(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE))
- break;
- MM_Wait(10);
- }
- }
- else
- REG_WR(pDevice, BufMgr.Mode,data | BUFMGR_MODE_ENABLE);
- break;
+ case T3_BLOCK_MBUF_MANAGER:
+ data = REG_RD(pDevice, BufMgr.Mode);
+ if (cntrl == LM_DISABLE)
+ {
+ data &= ~BUFMGR_MODE_ENABLE;
+ REG_WR(pDevice, BufMgr.Mode,data);
+ for(j = 0; j < MaxWaitCnt; j++)
+ {
+ if(!(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE))
+ break;
+ MM_Wait(10);
+ }
+ }
+ else
+ REG_WR(pDevice, BufMgr.Mode,data | BUFMGR_MODE_ENABLE);
+ break;
- case T3_BLOCK_MAC_GLOBAL:
- if(cntrl == LM_DISABLE)
- {
- pDevice->MacMode &= ~(MAC_MODE_ENABLE_TDE |
- MAC_MODE_ENABLE_RDE |
- MAC_MODE_ENABLE_FHDE);
- }
- else
- {
- pDevice->MacMode |= (MAC_MODE_ENABLE_TDE |
- MAC_MODE_ENABLE_RDE |
- MAC_MODE_ENABLE_FHDE);
- }
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- break;
+ case T3_BLOCK_MAC_GLOBAL:
+ if(cntrl == LM_DISABLE)
+ {
+ pDevice->MacMode &= ~(MAC_MODE_ENABLE_TDE |
+ MAC_MODE_ENABLE_RDE |
+ MAC_MODE_ENABLE_FHDE);
+ }
+ else
+ {
+ pDevice->MacMode |= (MAC_MODE_ENABLE_TDE |
+ MAC_MODE_ENABLE_RDE |
+ MAC_MODE_ENABLE_FHDE);
+ }
+ REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
+ break;
- default:
- return LM_STATUS_FAILURE;
- } /* switch */
+ default:
+ return LM_STATUS_FAILURE;
+ } /* switch */
- if(j >= MaxWaitCnt)
- {
- return LM_STATUS_FAILURE;
- }
+ if(j >= MaxWaitCnt)
+ {
+ return LM_STATUS_FAILURE;
+ }
}
return LM_STATUS_SUCCESS;
@@ -2318,7 +2312,7 @@
/* Disable transmit and receive DMA engines. Abort all pending requests. */
if(pDevice->InitDone)
{
- LM_Abort(pDevice);
+ LM_Abort(pDevice);
}
pDevice->ShuttingDown = FALSE;
@@ -2329,36 +2323,36 @@
/* in other chip revisions. */
if(pDevice->DelayPciGrant)
{
- Value32 = REG_RD(pDevice, PciCfg.ClockCtrl);
- REG_WR(pDevice, PciCfg.ClockCtrl, Value32 | BIT_31);
+ Value32 = REG_RD(pDevice, PciCfg.ClockCtrl);
+ REG_WR(pDevice, PciCfg.ClockCtrl, Value32 | BIT_31);
}
if(pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
{
- if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
- {
- Value32 = REG_RD(pDevice, PciCfg.PciState);
- Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
- REG_WR(pDevice, PciCfg.PciState, Value32);
- }
+ if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
+ {
+ Value32 = REG_RD(pDevice, PciCfg.PciState);
+ Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
+ REG_WR(pDevice, PciCfg.PciState, Value32);
+ }
}
/* Enable TaggedStatus mode. */
if(pDevice->UseTaggedStatus)
{
- pDevice->MiscHostCtrl |= MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE;
+ pDevice->MiscHostCtrl |= MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE;
}
/* Restore PCI configuration registers. */
MM_WriteConfig32(pDevice, PCI_CACHE_LINE_SIZE_REG,
- pDevice->SavedCacheLineReg);
+ pDevice->SavedCacheLineReg);
MM_WriteConfig32(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG,
- (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId);
+ (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId);
/* Clear the statistics block. */
for(j = 0x0300; j < 0x0b00; j++)
{
- MEM_WR_OFFSET(pDevice, j, 0);
+ MEM_WR_OFFSET(pDevice, j, 0);
}
/* Initialize the statistis Block */
@@ -2383,8 +2377,8 @@
/* Receive jumbo BD buffer. */
for(k = 0; k < T3_JUMBO_RCV_RCB_ENTRY_COUNT; k++)
{
- pDevice->pRxJumboBdVirt[k].HostAddr.High = 0;
- pDevice->pRxJumboBdVirt[k].HostAddr.Low = 0;
+ pDevice->pRxJumboBdVirt[k].HostAddr.High = 0;
+ pDevice->pRxJumboBdVirt[k].HostAddr.Low = 0;
}
#endif
@@ -2393,46 +2387,46 @@
/* GRC mode control register. */
#ifdef BIG_ENDIAN_PCI /* Jimmy, this ifdef block deleted in new code! */
Value32 =
- GRC_MODE_WORD_SWAP_DATA |
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
- GRC_MODE_INT_ON_MAC_ATTN |
- GRC_MODE_HOST_STACK_UP;
+ GRC_MODE_WORD_SWAP_DATA |
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
+ GRC_MODE_INT_ON_MAC_ATTN |
+ GRC_MODE_HOST_STACK_UP;
#else
/* No CPU Swap modes for PCI IO */
Value32 =
#ifdef BIG_ENDIAN_HOST
- GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
- GRC_MODE_BYTE_SWAP_DATA |
- GRC_MODE_WORD_SWAP_DATA |
+ GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
+ GRC_MODE_BYTE_SWAP_DATA |
+ GRC_MODE_WORD_SWAP_DATA |
#else
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
- GRC_MODE_BYTE_SWAP_DATA |
- GRC_MODE_WORD_SWAP_DATA |
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
+ GRC_MODE_BYTE_SWAP_DATA |
+ GRC_MODE_WORD_SWAP_DATA |
#endif
- GRC_MODE_INT_ON_MAC_ATTN |
- GRC_MODE_HOST_STACK_UP;
+ GRC_MODE_INT_ON_MAC_ATTN |
+ GRC_MODE_HOST_STACK_UP;
#endif /* !BIG_ENDIAN_PCI */
/* Configure send BD mode. */
if(pDevice->NicSendBd == FALSE)
{
- Value32 |= GRC_MODE_HOST_SEND_BDS;
+ Value32 |= GRC_MODE_HOST_SEND_BDS;
}
else
{
- Value32 |= GRC_MODE_4X_NIC_BASED_SEND_RINGS;
+ Value32 |= GRC_MODE_4X_NIC_BASED_SEND_RINGS;
}
/* Configure pseudo checksum mode. */
if(pDevice->NoTxPseudoHdrChksum)
{
- Value32 |= GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM;
+ Value32 |= GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM;
}
if(pDevice->NoRxPseudoHdrChksum)
{
- Value32 |= GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM;
+ Value32 |= GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM;
}
REG_WR(pDevice, Grc.Mode, Value32);
@@ -2452,60 +2446,60 @@
/* Configure the DMA read MBUF low water mark. */
if(pDevice->DmaMbufLowMark)
{
- REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
- pDevice->DmaMbufLowMark);
+ REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
+ pDevice->DmaMbufLowMark);
}
else
{
- if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE)
- {
- REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
- T3_DEF_DMA_MBUF_LOW_WMARK);
- }
- else
- {
- REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
- T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO);
- }
+ if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE)
+ {
+ REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
+ T3_DEF_DMA_MBUF_LOW_WMARK);
+ }
+ else
+ {
+ REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
+ T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO);
+ }
}
/* Configure the MAC Rx MBUF low water mark. */
if(pDevice->RxMacMbufLowMark)
{
- REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
- pDevice->RxMacMbufLowMark);
+ REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
+ pDevice->RxMacMbufLowMark);
}
else
{
- if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE)
- {
- REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
- T3_DEF_RX_MAC_MBUF_LOW_WMARK);
- }
- else
- {
- REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
- T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO);
- }
+ if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE)
+ {
+ REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
+ T3_DEF_RX_MAC_MBUF_LOW_WMARK);
+ }
+ else
+ {
+ REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
+ T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO);
+ }
}
/* Configure the MBUF high water mark. */
if(pDevice->MbufHighMark)
{
- REG_WR(pDevice, BufMgr.MbufHighWaterMark, pDevice->MbufHighMark);
+ REG_WR(pDevice, BufMgr.MbufHighWaterMark, pDevice->MbufHighMark);
}
else
{
- if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE)
- {
- REG_WR(pDevice, BufMgr.MbufHighWaterMark,
- T3_DEF_MBUF_HIGH_WMARK);
- }
- else
- {
- REG_WR(pDevice, BufMgr.MbufHighWaterMark,
- T3_DEF_MBUF_HIGH_WMARK_JUMBO);
- }
+ if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE)
+ {
+ REG_WR(pDevice, BufMgr.MbufHighWaterMark,
+ T3_DEF_MBUF_HIGH_WMARK);
+ }
+ else
+ {
+ REG_WR(pDevice, BufMgr.MbufHighWaterMark,
+ T3_DEF_MBUF_HIGH_WMARK_JUMBO);
+ }
}
REG_WR(pDevice, BufMgr.DmaLowWaterMark, T3_DEF_DMA_DESC_LOW_WMARK);
@@ -2516,14 +2510,14 @@
for(j = 0 ;j < 2000; j++)
{
- if(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE)
- break;
- MM_Wait(10);
+ if(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE)
+ break;
+ MM_Wait(10);
}
if(j >= 2000)
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
/* Enable the FTQs. */
@@ -2533,32 +2527,32 @@
/* Wait until FTQ is ready */
for(j = 0; j < 2000; j++)
{
- if(REG_RD(pDevice, Ftq.Reset) == 0)
- break;
- MM_Wait(10);
+ if(REG_RD(pDevice, Ftq.Reset) == 0)
+ break;
+ MM_Wait(10);
}
if(j >= 2000)
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
/* Initialize the Standard Receive RCB. */
REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.High,
- pDevice->RxStdBdPhy.High);
+ pDevice->RxStdBdPhy.High);
REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.Low,
- pDevice->RxStdBdPhy.Low);
+ pDevice->RxStdBdPhy.Low);
REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.u.MaxLen_Flags,
- MAX_STD_RCV_BUFFER_SIZE << 16);
+ MAX_STD_RCV_BUFFER_SIZE << 16);
/* Initialize the Jumbo Receive RCB. */
REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags,
- T3_RCB_FLAG_RING_DISABLED);
+ T3_RCB_FLAG_RING_DISABLED);
#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.High,
- pDevice->RxJumboBdPhy.High);
+ pDevice->RxJumboBdPhy.High);
REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.Low,
- pDevice->RxJumboBdPhy.Low);
+ pDevice->RxJumboBdPhy.Low);
REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags, 0);
@@ -2566,13 +2560,13 @@
/* Initialize the Mini Receive RCB. */
REG_WR(pDevice, RcvDataBdIn.MiniRcvRcb.u.MaxLen_Flags,
- T3_RCB_FLAG_RING_DISABLED);
+ T3_RCB_FLAG_RING_DISABLED);
{
- REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.NicRingAddr,
- (LM_UINT32) T3_NIC_STD_RCV_BUFFER_DESC_ADDR);
- REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.NicRingAddr,
- (LM_UINT32) T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR);
+ REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.NicRingAddr,
+ (LM_UINT32) T3_NIC_STD_RCV_BUFFER_DESC_ADDR);
+ REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.NicRingAddr,
+ (LM_UINT32) T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR);
}
/* Receive BD Ring replenish threshold. */
@@ -2583,7 +2577,7 @@
/* Disable all the unused rings. */
for(j = 0; j < T3_MAX_SEND_RCB_COUNT; j++) {
- MEM_WR(pDevice, SendRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED);
+ MEM_WR(pDevice, SendRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED);
} /* for */
/* Initialize the indices. */
@@ -2596,54 +2590,54 @@
/* Set up host or NIC based send RCB. */
if(pDevice->NicSendBd == FALSE)
{
- MEM_WR(pDevice, SendRcb[0].HostRingAddr.High,
- pDevice->SendBdPhy.High);
- MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low,
- pDevice->SendBdPhy.Low);
+ MEM_WR(pDevice, SendRcb[0].HostRingAddr.High,
+ pDevice->SendBdPhy.High);
+ MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low,
+ pDevice->SendBdPhy.Low);
- /* Set up the NIC ring address in the RCB. */
- MEM_WR(pDevice, SendRcb[0].NicRingAddr,T3_NIC_SND_BUFFER_DESC_ADDR);
+ /* Set up the NIC ring address in the RCB. */
+ MEM_WR(pDevice, SendRcb[0].NicRingAddr,T3_NIC_SND_BUFFER_DESC_ADDR);
- /* Setup the RCB. */
- MEM_WR(pDevice, SendRcb[0].u.MaxLen_Flags,
- T3_SEND_RCB_ENTRY_COUNT << 16);
+ /* Setup the RCB. */
+ MEM_WR(pDevice, SendRcb[0].u.MaxLen_Flags,
+ T3_SEND_RCB_ENTRY_COUNT << 16);
- for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++)
- {
- pDevice->pSendBdVirt[k].HostAddr.High = 0;
- pDevice->pSendBdVirt[k].HostAddr.Low = 0;
- }
+ for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++)
+ {
+ pDevice->pSendBdVirt[k].HostAddr.High = 0;
+ pDevice->pSendBdVirt[k].HostAddr.Low = 0;
+ }
}
else
{
- MEM_WR(pDevice, SendRcb[0].HostRingAddr.High, 0);
- MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low, 0);
- MEM_WR(pDevice, SendRcb[0].NicRingAddr,
- pDevice->SendBdPhy.Low);
+ MEM_WR(pDevice, SendRcb[0].HostRingAddr.High, 0);
+ MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low, 0);
+ MEM_WR(pDevice, SendRcb[0].NicRingAddr,
+ pDevice->SendBdPhy.Low);
- for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++)
- {
- __raw_writel(0, &(pDevice->pSendBdVirt[k].HostAddr.High));
- __raw_writel(0, &(pDevice->pSendBdVirt[k].HostAddr.Low));
- __raw_writel(0, &(pDevice->pSendBdVirt[k].u1.Len_Flags));
- pDevice->ShadowSendBd[k].HostAddr.High = 0;
- pDevice->ShadowSendBd[k].u1.Len_Flags = 0;
- }
+ for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++)
+ {
+ __raw_writel(0, &(pDevice->pSendBdVirt[k].HostAddr.High));
+ __raw_writel(0, &(pDevice->pSendBdVirt[k].HostAddr.Low));
+ __raw_writel(0, &(pDevice->pSendBdVirt[k].u1.Len_Flags));
+ pDevice->ShadowSendBd[k].HostAddr.High = 0;
+ pDevice->ShadowSendBd[k].u1.Len_Flags = 0;
+ }
}
atomic_set(&pDevice->SendBdLeft, T3_SEND_RCB_ENTRY_COUNT-1);
/* Configure the receive return rings. */
for(j = 0; j < T3_MAX_RCV_RETURN_RCB_COUNT; j++)
{
- MEM_WR(pDevice, RcvRetRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED);
+ MEM_WR(pDevice, RcvRetRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED);
}
pDevice->RcvRetConIdx = 0;
MEM_WR(pDevice, RcvRetRcb[0].HostRingAddr.High,
- pDevice->RcvRetBdPhy.High);
+ pDevice->RcvRetBdPhy.High);
MEM_WR(pDevice, RcvRetRcb[0].HostRingAddr.Low,
- pDevice->RcvRetBdPhy.Low);
+ pDevice->RcvRetBdPhy.Low);
/* Set up the NIC ring address in the RCB. */
/* Not very clear from the spec. I am guessing that for Receive */
@@ -2652,7 +2646,7 @@
/* Setup the RCB. */
MEM_WR(pDevice, RcvRetRcb[0].u.MaxLen_Flags,
- T3_RCV_RETURN_RCB_ENTRY_COUNT << 16);
+ T3_RCV_RETURN_RCB_ENTRY_COUNT << 16);
/* Reinitialize RX ring producer index */
MB_REG_WR(pDevice, Mailbox.RcvStdProdIdx.Low, 0);
@@ -2677,9 +2671,9 @@
/* Initialize the transmit random backoff seed. */
Value32 = (pDevice->NodeAddress[0] + pDevice->NodeAddress[1] +
- pDevice->NodeAddress[2] + pDevice->NodeAddress[3] +
- pDevice->NodeAddress[4] + pDevice->NodeAddress[5]) &
- MAC_TX_BACKOFF_SEED_MASK;
+ pDevice->NodeAddress[2] + pDevice->NodeAddress[3] +
+ pDevice->NodeAddress[4] + pDevice->NodeAddress[5]) &
+ MAC_TX_BACKOFF_SEED_MASK;
REG_WR(pDevice, MacCtrl.TxBackoffSeed, Value32);
/* Receive MTU. Frames larger than the MTU is marked as oversized. */
@@ -2708,88 +2702,88 @@
/* Enable Send Data Initator Statistics */
REG_WR(pDevice, SndDataIn.StatsEnableMask,0xffffff);
REG_WR(pDevice, SndDataIn.StatsCtrl,
- T3_SND_DATA_IN_STATS_CTRL_ENABLE | \
- T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE);
+ T3_SND_DATA_IN_STATS_CTRL_ENABLE | \
+ T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE);
/* Disable the host coalescing state machine before configuring it's */
/* parameters. */
REG_WR(pDevice, HostCoalesce.Mode, 0);
for(j = 0; j < 2000; j++)
{
- Value32 = REG_RD(pDevice, HostCoalesce.Mode);
- if(!(Value32 & HOST_COALESCE_ENABLE))
- {
- break;
- }
- MM_Wait(10);
+ Value32 = REG_RD(pDevice, HostCoalesce.Mode);
+ if(!(Value32 & HOST_COALESCE_ENABLE))
+ {
+ break;
+ }
+ MM_Wait(10);
}
/* Host coalescing configurations. */
REG_WR(pDevice, HostCoalesce.RxCoalescingTicks, pDevice->RxCoalescingTicks);
REG_WR(pDevice, HostCoalesce.TxCoalescingTicks, pDevice->TxCoalescingTicks);
REG_WR(pDevice, HostCoalesce.RxMaxCoalescedFrames,
- pDevice->RxMaxCoalescedFrames);
+ pDevice->RxMaxCoalescedFrames);
REG_WR(pDevice, HostCoalesce.TxMaxCoalescedFrames,
- pDevice->TxMaxCoalescedFrames);
+ pDevice->TxMaxCoalescedFrames);
REG_WR(pDevice, HostCoalesce.RxCoalescedTickDuringInt,
- pDevice->RxCoalescingTicksDuringInt);
+ pDevice->RxCoalescingTicksDuringInt);
REG_WR(pDevice, HostCoalesce.TxCoalescedTickDuringInt,
- pDevice->TxCoalescingTicksDuringInt);
+ pDevice->TxCoalescingTicksDuringInt);
REG_WR(pDevice, HostCoalesce.RxMaxCoalescedFramesDuringInt,
- pDevice->RxMaxCoalescedFramesDuringInt);
+ pDevice->RxMaxCoalescedFramesDuringInt);
REG_WR(pDevice, HostCoalesce.TxMaxCoalescedFramesDuringInt,
- pDevice->TxMaxCoalescedFramesDuringInt);
+ pDevice->TxMaxCoalescedFramesDuringInt);
/* Initialize the address of the status block. The NIC will DMA */
/* the status block to this memory which resides on the host. */
REG_WR(pDevice, HostCoalesce.StatusBlkHostAddr.High,
- pDevice->StatusBlkPhy.High);
+ pDevice->StatusBlkPhy.High);
REG_WR(pDevice, HostCoalesce.StatusBlkHostAddr.Low,
- pDevice->StatusBlkPhy.Low);
+ pDevice->StatusBlkPhy.Low);
/* Initialize the address of the statistics block. The NIC will DMA */
/* the statistics to this block of memory. */
REG_WR(pDevice, HostCoalesce.StatsBlkHostAddr.High,
- pDevice->StatsBlkPhy.High);
+ pDevice->StatsBlkPhy.High);
REG_WR(pDevice, HostCoalesce.StatsBlkHostAddr.Low,
- pDevice->StatsBlkPhy.Low);
+ pDevice->StatsBlkPhy.Low);
REG_WR(pDevice, HostCoalesce.StatsCoalescingTicks,
- pDevice->StatsCoalescingTicks);
+ pDevice->StatsCoalescingTicks);
REG_WR(pDevice, HostCoalesce.StatsBlkNicAddr, 0x300);
REG_WR(pDevice, HostCoalesce.StatusBlkNicAddr,0xb00);
/* Enable Host Coalesing state machine */
REG_WR(pDevice, HostCoalesce.Mode, HOST_COALESCE_ENABLE |
- pDevice->CoalesceMode);
+ pDevice->CoalesceMode);
/* Enable the Receive BD Completion state machine. */
REG_WR(pDevice, RcvBdComp.Mode, RCV_BD_COMP_MODE_ENABLE |
- RCV_BD_COMP_MODE_ATTN_ENABLE);
+ RCV_BD_COMP_MODE_ATTN_ENABLE);
/* Enable the Receive List Placement state machine. */
REG_WR(pDevice, RcvListPlmt.Mode, RCV_LIST_PLMT_MODE_ENABLE);
/* Enable the Receive List Selector state machine. */
REG_WR(pDevice, RcvListSel.Mode, RCV_LIST_SEL_MODE_ENABLE |
- RCV_LIST_SEL_MODE_ATTN_ENABLE);
+ RCV_LIST_SEL_MODE_ATTN_ENABLE);
/* Enable transmit DMA, clear statistics. */
pDevice->MacMode = MAC_MODE_ENABLE_TX_STATISTICS |
- MAC_MODE_ENABLE_RX_STATISTICS | MAC_MODE_ENABLE_TDE |
- MAC_MODE_ENABLE_RDE | MAC_MODE_ENABLE_FHDE;
+ MAC_MODE_ENABLE_RX_STATISTICS | MAC_MODE_ENABLE_TDE |
+ MAC_MODE_ENABLE_RDE | MAC_MODE_ENABLE_FHDE;
REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
- MAC_MODE_CLEAR_RX_STATISTICS | MAC_MODE_CLEAR_TX_STATISTICS);
+ MAC_MODE_CLEAR_RX_STATISTICS | MAC_MODE_CLEAR_TX_STATISTICS);
/* GRC miscellaneous local control register. */
pDevice->GrcLocalCtrl = GRC_MISC_LOCAL_CTRL_INT_ON_ATTN |
- GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM;
+ GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM;
if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
{
- pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1;
+ pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1;
}
REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
@@ -2798,13 +2792,13 @@
/* Reset RX counters. */
for(j = 0; j < sizeof(LM_RX_COUNTERS); j++)
{
- ((PLM_UINT8) &pDevice->RxCounters)[j] = 0;
+ ((PLM_UINT8) &pDevice->RxCounters)[j] = 0;
}
/* Reset TX counters. */
for(j = 0; j < sizeof(LM_TX_COUNTERS); j++)
{
- ((PLM_UINT8) &pDevice->TxCounters)[j] = 0;
+ ((PLM_UINT8) &pDevice->TxCounters)[j] = 0;
}
MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 0);
@@ -2814,53 +2808,53 @@
/* Enable the DMA Write state machine. */
Value32 = DMA_WRITE_MODE_ENABLE |
- DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE |
- DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE |
- DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE |
- DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE |
- DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE;
+ DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE |
+ DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE |
+ DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE |
+ DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
+ DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE |
+ DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
+ DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE |
+ DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE;
REG_WR(pDevice, DmaWrite.Mode, Value32);
if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
{
- if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
- {
- Value16 = REG_RD(pDevice, PciCfg.PciXCommand);
- Value16 &= ~(PCIX_CMD_MAX_SPLIT_MASK | PCIX_CMD_MAX_BURST_MASK);
- Value16 |= ((PCIX_CMD_MAX_BURST_CPIOB << PCIX_CMD_MAX_BURST_SHL) &
- PCIX_CMD_MAX_BURST_MASK);
- if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE)
- {
- Value16 |= (pDevice->SplitModeMaxReq << PCIX_CMD_MAX_SPLIT_SHL)
- & PCIX_CMD_MAX_SPLIT_MASK;
- }
- REG_WR(pDevice, PciCfg.PciXCommand, Value16);
- }
+ if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
+ {
+ Value16 = REG_RD(pDevice, PciCfg.PciXCommand);
+ Value16 &= ~(PCIX_CMD_MAX_SPLIT_MASK | PCIX_CMD_MAX_BURST_MASK);
+ Value16 |= ((PCIX_CMD_MAX_BURST_CPIOB << PCIX_CMD_MAX_BURST_SHL) &
+ PCIX_CMD_MAX_BURST_MASK);
+ if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE)
+ {
+ Value16 |= (pDevice->SplitModeMaxReq << PCIX_CMD_MAX_SPLIT_SHL)
+ & PCIX_CMD_MAX_SPLIT_MASK;
+ }
+ REG_WR(pDevice, PciCfg.PciXCommand, Value16);
+ }
}
/* Enable the Read DMA state machine. */
Value32 = DMA_READ_MODE_ENABLE |
- DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE |
- DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE |
- DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE |
- DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
- DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE |
- DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
- DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE |
- DMA_READ_MODE_LONG_READ_ATTN_ENABLE;
+ DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE |
+ DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE |
+ DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE |
+ DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
+ DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE |
+ DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
+ DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE |
+ DMA_READ_MODE_LONG_READ_ATTN_ENABLE;
if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE)
{
- Value32 |= DMA_READ_MODE_SPLIT_ENABLE;
+ Value32 |= DMA_READ_MODE_SPLIT_ENABLE;
}
REG_WR(pDevice, DmaRead.Mode, Value32);
/* Enable the Receive Data Completion state machine. */
REG_WR(pDevice, RcvDataComp.Mode, RCV_DATA_COMP_MODE_ENABLE |
- RCV_DATA_COMP_MODE_ATTN_ENABLE);
+ RCV_DATA_COMP_MODE_ATTN_ENABLE);
/* Enable the Mbuf Cluster Free state machine. */
REG_WR(pDevice, MbufClusterFree.Mode, MBUF_CLUSTER_FREE_MODE_ENABLE);
@@ -2870,32 +2864,32 @@
/* Enable the Send BD Completion state machine. */
REG_WR(pDevice, SndBdComp.Mode, SND_BD_COMP_MODE_ENABLE |
- SND_BD_COMP_MODE_ATTN_ENABLE);
+ SND_BD_COMP_MODE_ATTN_ENABLE);
/* Enable the Receive BD Initiator state machine. */
REG_WR(pDevice, RcvBdIn.Mode, RCV_BD_IN_MODE_ENABLE |
- RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE);
+ RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE);
/* Enable the Receive Data and Receive BD Initiator state machine. */
REG_WR(pDevice, RcvDataBdIn.Mode, RCV_DATA_BD_IN_MODE_ENABLE |
- RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE);
+ RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE);
/* Enable the Send Data Initiator state machine. */
REG_WR(pDevice, SndDataIn.Mode, T3_SND_DATA_IN_MODE_ENABLE);
/* Enable the Send BD Initiator state machine. */
REG_WR(pDevice, SndBdIn.Mode, SND_BD_IN_MODE_ENABLE |
- SND_BD_IN_MODE_ATTN_ENABLE);
+ SND_BD_IN_MODE_ATTN_ENABLE);
/* Enable the Send BD Selector state machine. */
REG_WR(pDevice, SndBdSel.Mode, SND_BD_SEL_MODE_ENABLE |
- SND_BD_SEL_MODE_ATTN_ENABLE);
+ SND_BD_SEL_MODE_ATTN_ENABLE);
#if INCLUDE_5701_AX_FIX
/* Load the firmware for the 5701_A0 workaround. */
if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0)
{
- LM_LoadRlsFirmware(pDevice);
+ LM_LoadRlsFirmware(pDevice);
}
#endif
@@ -2909,9 +2903,9 @@
if (pDevice->RestoreOnWakeUp)
{
- pDevice->RestoreOnWakeUp = FALSE;
- pDevice->DisableAutoNeg = pDevice->WakeUpDisableAutoNeg;
- pDevice->RequestedMediaType = pDevice->WakeUpRequestedMediaType;
+ pDevice->RestoreOnWakeUp = FALSE;
+ pDevice->DisableAutoNeg = pDevice->WakeUpDisableAutoNeg;
+ pDevice->RequestedMediaType = pDevice->WakeUpRequestedMediaType;
}
/* Disable auto polling. */
@@ -2919,20 +2913,20 @@
REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
{
- Value32 = LED_CTRL_PHY_MODE_1;
+ Value32 = LED_CTRL_PHY_MODE_1;
}
else
{
- if(pDevice->LedMode == LED_MODE_OUTPUT)
- {
- Value32 = LED_CTRL_PHY_MODE_2;
- }
- else
- {
- Value32 = LED_CTRL_PHY_MODE_1;
- }
+ if(pDevice->LedMode == LED_MODE_OUTPUT)
+ {
+ Value32 = LED_CTRL_PHY_MODE_2;
+ }
+ else
+ {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ }
}
REG_WR(pDevice, MacCtrl.LedCtrl, Value32);
@@ -2941,22 +2935,22 @@
if (pDevice->EnableTbi)
{
- REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_RESET);
- MM_Wait(10);
- REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
- if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1)
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg, 0x616000);
- }
+ REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_RESET);
+ MM_Wait(10);
+ REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
+ if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1)
+ {
+ REG_WR(pDevice, MacCtrl.SerdesCfg, 0x616000);
+ }
}
/* Setup the phy chip. */
LM_SetupPhy(pDevice);
if (!pDevice->EnableTbi) {
- /* Clear CRC stats */
- LM_ReadPhy(pDevice, 0x1e, &Value32);
- LM_WritePhy(pDevice, 0x1e, Value32 | 0x8000);
- LM_ReadPhy(pDevice, 0x14, &Value32);
+ /* Clear CRC stats */
+ LM_ReadPhy(pDevice, 0x1e, &Value32);
+ LM_WritePhy(pDevice, 0x1e, Value32 | 0x8000);
+ LM_ReadPhy(pDevice, 0x14, &Value32);
}
/* Set up the receive mask. */
@@ -2965,13 +2959,13 @@
/* Queue Rx packet buffers. */
if(pDevice->QueueRxPackets)
{
- LM_QueueRxPackets(pDevice);
+ LM_QueueRxPackets(pDevice);
}
/* Enable interrupt to the host. */
if(pDevice->InitDone)
{
- LM_EnableInterrupt(pDevice);
+ LM_EnableInterrupt(pDevice);
}
return LM_STATUS_SUCCESS;
@@ -2990,14 +2984,13 @@
PLM_DEVICE_BLOCK pDevice)
{
REG_WR(pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl |
- MISC_HOST_CTRL_MASK_PCI_INT);
+ MISC_HOST_CTRL_MASK_PCI_INT);
MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1);
return LM_STATUS_SUCCESS;
}
-
/******************************************************************************/
/* Description: */
/* This routine enables the adapter to generate interrupts. */
@@ -3010,20 +3003,19 @@
PLM_DEVICE_BLOCK pDevice)
{
REG_WR(pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl &
- ~MISC_HOST_CTRL_MASK_PCI_INT);
+ ~MISC_HOST_CTRL_MASK_PCI_INT);
MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 0);
if(pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED)
{
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_SET_INT);
+ REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_SET_INT);
}
return LM_STATUS_SUCCESS;
}
-
/******************************************************************************/
/* Description: */
/* This routine puts a packet on the wire if there is a transmit DMA */
@@ -3045,7 +3037,7 @@
LM_UINT32 Idx;
if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) {
- return LM_5700SendPacket(pDevice, pPacket);
+ return LM_5700SendPacket(pDevice, pPacket);
}
/* Update the SendBdLeft count. */
@@ -3059,103 +3051,103 @@
/* Next producer index. */
if (pDevice->NicSendBd == TRUE)
{
- T3_64BIT_HOST_ADDR paddr;
+ T3_64BIT_HOST_ADDR paddr;
- pShadowSendBd = &pDevice->ShadowSendBd[Idx];
- for(FragCount = 0; ; )
- {
- MM_MapTxDma(pDevice, pPacket, &paddr, &Len, FragCount);
- /* Initialize the pointer to the send buffer fragment. */
- if (paddr.High != pShadowSendBd->HostAddr.High)
- {
- __raw_writel(paddr.High, &(pSendBd->HostAddr.High));
- pShadowSendBd->HostAddr.High = paddr.High;
- }
- __raw_writel(paddr.Low, &(pSendBd->HostAddr.Low));
+ pShadowSendBd = &pDevice->ShadowSendBd[Idx];
+ for(FragCount = 0; ; )
+ {
+ MM_MapTxDma(pDevice, pPacket, &paddr, &Len, FragCount);
+ /* Initialize the pointer to the send buffer fragment. */
+ if (paddr.High != pShadowSendBd->HostAddr.High)
+ {
+ __raw_writel(paddr.High, &(pSendBd->HostAddr.High));
+ pShadowSendBd->HostAddr.High = paddr.High;
+ }
+ __raw_writel(paddr.Low, &(pSendBd->HostAddr.Low));
- /* Setup the control flags and send buffer size. */
- Value32 = (Len << 16) | pPacket->Flags;
+ /* Setup the control flags and send buffer size. */
+ Value32 = (Len << 16) | pPacket->Flags;
- Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+ Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
- FragCount++;
- if (FragCount >= pPacket->u.Tx.FragCount)
- {
- Value32 |= SND_BD_FLAG_END;
- if (Value32 != pShadowSendBd->u1.Len_Flags)
- {
- __raw_writel(Value32, &(pSendBd->u1.Len_Flags));
- pShadowSendBd->u1.Len_Flags = Value32;
- }
- if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
- __raw_writel(pPacket->VlanTag, &(pSendBd->u2.VlanTag));
- }
- break;
- }
- else
- {
- if (Value32 != pShadowSendBd->u1.Len_Flags)
- {
- __raw_writel(Value32, &(pSendBd->u1.Len_Flags));
- pShadowSendBd->u1.Len_Flags = Value32;
- }
- if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
- __raw_writel(pPacket->VlanTag, &(pSendBd->u2.VlanTag));
- }
- }
+ FragCount++;
+ if (FragCount >= pPacket->u.Tx.FragCount)
+ {
+ Value32 |= SND_BD_FLAG_END;
+ if (Value32 != pShadowSendBd->u1.Len_Flags)
+ {
+ __raw_writel(Value32, &(pSendBd->u1.Len_Flags));
+ pShadowSendBd->u1.Len_Flags = Value32;
+ }
+ if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
+ __raw_writel(pPacket->VlanTag, &(pSendBd->u2.VlanTag));
+ }
+ break;
+ }
+ else
+ {
+ if (Value32 != pShadowSendBd->u1.Len_Flags)
+ {
+ __raw_writel(Value32, &(pSendBd->u1.Len_Flags));
+ pShadowSendBd->u1.Len_Flags = Value32;
+ }
+ if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
+ __raw_writel(pPacket->VlanTag, &(pSendBd->u2.VlanTag));
+ }
+ }
- pSendBd++;
- pShadowSendBd++;
- if (Idx == 0)
- {
- pSendBd = &pDevice->pSendBdVirt[0];
- pShadowSendBd = &pDevice->ShadowSendBd[0];
- }
- } /* for */
+ pSendBd++;
+ pShadowSendBd++;
+ if (Idx == 0)
+ {
+ pSendBd = &pDevice->pSendBdVirt[0];
+ pShadowSendBd = &pDevice->ShadowSendBd[0];
+ }
+ } /* for */
- /* Put the packet descriptor in the ActiveQ. */
- QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket);
+ /* Put the packet descriptor in the ActiveQ. */
+ QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket);
- wmb();
- MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
+ wmb();
+ MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
}
else
{
- for(FragCount = 0; ; )
- {
- /* Initialize the pointer to the send buffer fragment. */
- MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount);
+ for(FragCount = 0; ; )
+ {
+ /* Initialize the pointer to the send buffer fragment. */
+ MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount);
- pSendBd->u2.VlanTag = pPacket->VlanTag;
+ pSendBd->u2.VlanTag = pPacket->VlanTag;
- /* Setup the control flags and send buffer size. */
- Value32 = (Len << 16) | pPacket->Flags;
+ /* Setup the control flags and send buffer size. */
+ Value32 = (Len << 16) | pPacket->Flags;
- Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+ Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
- FragCount++;
- if (FragCount >= pPacket->u.Tx.FragCount)
- {
- pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END;
- break;
- }
- else
- {
- pSendBd->u1.Len_Flags = Value32;
- }
- pSendBd++;
- if (Idx == 0)
- {
- pSendBd = &pDevice->pSendBdVirt[0];
- }
- } /* for */
+ FragCount++;
+ if (FragCount >= pPacket->u.Tx.FragCount)
+ {
+ pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END;
+ break;
+ }
+ else
+ {
+ pSendBd->u1.Len_Flags = Value32;
+ }
+ pSendBd++;
+ if (Idx == 0)
+ {
+ pSendBd = &pDevice->pSendBdVirt[0];
+ }
+ } /* for */
- /* Put the packet descriptor in the ActiveQ. */
- QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket);
+ /* Put the packet descriptor in the ActiveQ. */
+ QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket);
- wmb();
- MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
+ wmb();
+ MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
}
@@ -3176,121 +3168,121 @@
while (1)
{
- /* Initalize the send buffer descriptors. */
- StartIdx = Idx = pDevice->SendProdIdx;
+ /* Initalize the send buffer descriptors. */
+ StartIdx = Idx = pDevice->SendProdIdx;
- if (pDevice->NicSendBd)
- {
- pTmpSendBd = pSendBd = &NicSendBdArr[0];
- }
- else
- {
- pTmpSendBd = pSendBd = &pDevice->pSendBdVirt[Idx];
- }
+ if (pDevice->NicSendBd)
+ {
+ pTmpSendBd = pSendBd = &NicSendBdArr[0];
+ }
+ else
+ {
+ pTmpSendBd = pSendBd = &pDevice->pSendBdVirt[Idx];
+ }
- /* Next producer index. */
- for(FragCount = 0; ; )
- {
- LM_UINT32 Value32, Len;
+ /* Next producer index. */
+ for(FragCount = 0; ; )
+ {
+ LM_UINT32 Value32, Len;
- /* Initialize the pointer to the send buffer fragment. */
- MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount);
+ /* Initialize the pointer to the send buffer fragment. */
+ MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount);
- pSendBd->u2.VlanTag = pPacket->VlanTag;
+ pSendBd->u2.VlanTag = pPacket->VlanTag;
- /* Setup the control flags and send buffer size. */
- Value32 = (Len << 16) | pPacket->Flags;
+ /* Setup the control flags and send buffer size. */
+ Value32 = (Len << 16) | pPacket->Flags;
- Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+ Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
- FragCount++;
- if (FragCount >= pPacket->u.Tx.FragCount)
- {
- pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END;
- break;
- }
- else
- {
- pSendBd->u1.Len_Flags = Value32;
- }
- pSendBd++;
- if ((Idx == 0) && !pDevice->NicSendBd)
- {
- pSendBd = &pDevice->pSendBdVirt[0];
- }
- } /* for */
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- if (LM_Test4GBoundary(pDevice, pPacket, pTmpSendBd) ==
- LM_STATUS_SUCCESS)
- {
- if (MM_CoalesceTxBuffer(pDevice, pPacket) != LM_STATUS_SUCCESS)
- {
- QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket);
- return LM_STATUS_FAILURE;
- }
- continue;
- }
- }
- break;
+ FragCount++;
+ if (FragCount >= pPacket->u.Tx.FragCount)
+ {
+ pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END;
+ break;
+ }
+ else
+ {
+ pSendBd->u1.Len_Flags = Value32;
+ }
+ pSendBd++;
+ if ((Idx == 0) && !pDevice->NicSendBd)
+ {
+ pSendBd = &pDevice->pSendBdVirt[0];
+ }
+ } /* for */
+ if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
+ {
+ if (LM_Test4GBoundary(pDevice, pPacket, pTmpSendBd) ==
+ LM_STATUS_SUCCESS)
+ {
+ if (MM_CoalesceTxBuffer(pDevice, pPacket) != LM_STATUS_SUCCESS)
+ {
+ QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket);
+ return LM_STATUS_FAILURE;
+ }
+ continue;
+ }
+ }
+ break;
}
/* Put the packet descriptor in the ActiveQ. */
QQ_PushTail(&pDevice->TxPacketActiveQ.Container, pPacket);
if (pDevice->NicSendBd)
{
- pSendBd = &pDevice->pSendBdVirt[StartIdx];
- pShadowSendBd = &pDevice->ShadowSendBd[StartIdx];
+ pSendBd = &pDevice->pSendBdVirt[StartIdx];
+ pShadowSendBd = &pDevice->ShadowSendBd[StartIdx];
- while (StartIdx != Idx)
- {
- LM_UINT32 Value32;
+ while (StartIdx != Idx)
+ {
+ LM_UINT32 Value32;
- if ((Value32 = pTmpSendBd->HostAddr.High) !=
- pShadowSendBd->HostAddr.High)
- {
- __raw_writel(Value32, &(pSendBd->HostAddr.High));
- pShadowSendBd->HostAddr.High = Value32;
- }
+ if ((Value32 = pTmpSendBd->HostAddr.High) !=
+ pShadowSendBd->HostAddr.High)
+ {
+ __raw_writel(Value32, &(pSendBd->HostAddr.High));
+ pShadowSendBd->HostAddr.High = Value32;
+ }
- __raw_writel(pTmpSendBd->HostAddr.Low, &(pSendBd->HostAddr.Low));
+ __raw_writel(pTmpSendBd->HostAddr.Low, &(pSendBd->HostAddr.Low));
- if ((Value32 = pTmpSendBd->u1.Len_Flags) !=
- pShadowSendBd->u1.Len_Flags)
- {
- __raw_writel(Value32, &(pSendBd->u1.Len_Flags));
- pShadowSendBd->u1.Len_Flags = Value32;
- }
+ if ((Value32 = pTmpSendBd->u1.Len_Flags) !=
+ pShadowSendBd->u1.Len_Flags)
+ {
+ __raw_writel(Value32, &(pSendBd->u1.Len_Flags));
+ pShadowSendBd->u1.Len_Flags = Value32;
+ }
- if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG)
- {
- __raw_writel(pTmpSendBd->u2.VlanTag, &(pSendBd->u2.VlanTag));
- }
+ if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG)
+ {
+ __raw_writel(pTmpSendBd->u2.VlanTag, &(pSendBd->u2.VlanTag));
+ }
- StartIdx = (StartIdx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
- if (StartIdx == 0)
- pSendBd = &pDevice->pSendBdVirt[0];
- else
- pSendBd++;
- pTmpSendBd++;
- }
- wmb();
- MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
+ StartIdx = (StartIdx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+ if (StartIdx == 0)
+ pSendBd = &pDevice->pSendBdVirt[0];
+ else
+ pSendBd++;
+ pTmpSendBd++;
+ }
+ wmb();
+ MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
- if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
- {
- MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
- }
+ if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
+ {
+ MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
+ }
}
else
{
- wmb();
- MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
+ wmb();
+ MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
- if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
- {
- MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
- }
+ if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
+ {
+ MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
+ }
}
/* Update the SendBdLeft count. */
@@ -3312,27 +3304,27 @@
Idx = pDevice->SendProdIdx;
for(FragCount = 0; ; )
{
- Len = pSendBd->u1.Len_Flags >> 16;
- if (((Base = pSendBd->HostAddr.Low) > 0xffffdcc0) &&
- (pSendBd->HostAddr.High == 0) &&
- ((Base + 8 + Len) < Base))
- {
- return LM_STATUS_SUCCESS;
- }
- FragCount++;
- if (FragCount >= pPacket->u.Tx.FragCount)
- {
- break;
- }
- pSendBd++;
- if (!pDevice->NicSendBd)
- {
- Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
- if (Idx == 0)
- {
- pSendBd = &pDevice->pSendBdVirt[0];
- }
- }
+ Len = pSendBd->u1.Len_Flags >> 16;
+ if (((Base = pSendBd->HostAddr.Low) > 0xffffdcc0) &&
+ (pSendBd->HostAddr.High == 0) &&
+ ((Base + 8 + Len) < Base))
+ {
+ return LM_STATUS_SUCCESS;
+ }
+ FragCount++;
+ if (FragCount >= pPacket->u.Tx.FragCount)
+ {
+ break;
+ }
+ pSendBd++;
+ if (!pDevice->NicSendBd)
+ {
+ Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
+ if (Idx == 0)
+ {
+ pSendBd = &pDevice->pSendBdVirt[0];
+ }
+ }
}
return LM_STATUS_FAILURE;
}
@@ -3354,26 +3346,25 @@
for(j = 0; j < BufferSize; j++)
{
- Reg ^= pBuffer[j];
+ Reg ^= pBuffer[j];
- for(k = 0; k < 8; k++)
- {
- Tmp = Reg & 0x01;
+ for(k = 0; k < 8; k++)
+ {
+ Tmp = Reg & 0x01;
- Reg >>= 1;
+ Reg >>= 1;
- if(Tmp)
- {
- Reg ^= 0xedb88320;
- }
- }
+ if(Tmp)
+ {
+ Reg ^= 0xedb88320;
+ }
+ }
}
return ~Reg;
} /* ComputeCrc32 */
-
/******************************************************************************/
/* Description: */
/* This routine sets the receive control register according to ReceiveMask */
@@ -3395,42 +3386,42 @@
if(Mask & LM_ACCEPT_UNICAST)
{
- Mask &= ~LM_ACCEPT_UNICAST;
+ Mask &= ~LM_ACCEPT_UNICAST;
}
if(Mask & LM_ACCEPT_MULTICAST)
{
- Mask &= ~LM_ACCEPT_MULTICAST;
+ Mask &= ~LM_ACCEPT_MULTICAST;
}
if(Mask & LM_ACCEPT_ALL_MULTICAST)
{
- Mask &= ~LM_ACCEPT_ALL_MULTICAST;
+ Mask &= ~LM_ACCEPT_ALL_MULTICAST;
}
if(Mask & LM_ACCEPT_BROADCAST)
{
- Mask &= ~LM_ACCEPT_BROADCAST;
+ Mask &= ~LM_ACCEPT_BROADCAST;
}
RxMode &= ~RX_MODE_PROMISCUOUS_MODE;
if(Mask & LM_PROMISCUOUS_MODE)
{
- RxMode |= RX_MODE_PROMISCUOUS_MODE;
- Mask &= ~LM_PROMISCUOUS_MODE;
+ RxMode |= RX_MODE_PROMISCUOUS_MODE;
+ Mask &= ~LM_PROMISCUOUS_MODE;
}
RxMode &= ~(RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED);
if(Mask & LM_ACCEPT_ERROR_PACKET)
{
- RxMode |= RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED;
- Mask &= ~LM_ACCEPT_ERROR_PACKET;
+ RxMode |= RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED;
+ Mask &= ~LM_ACCEPT_ERROR_PACKET;
}
/* Make sure all the bits are valid before committing changes. */
if(Mask)
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
/* Commit the new filter. */
@@ -3442,90 +3433,89 @@
/* Set up the MC hash table. */
if(ReceiveMask & LM_ACCEPT_ALL_MULTICAST)
{
- for(k = 0; k < 4; k++)
- {
- REG_WR(pDevice, MacCtrl.HashReg[k], 0xffffffff);
- }
+ for(k = 0; k < 4; k++)
+ {
+ REG_WR(pDevice, MacCtrl.HashReg[k], 0xffffffff);
+ }
}
else if(ReceiveMask & LM_ACCEPT_MULTICAST)
{
- LM_UINT32 HashReg[4];
+ LM_UINT32 HashReg[4];
- HashReg[0] = 0; HashReg[1] = 0; HashReg[2] = 0; HashReg[3] = 0;
- for(j = 0; j < pDevice->McEntryCount; j++)
- {
- LM_UINT32 RegIndex;
- LM_UINT32 Bitpos;
- LM_UINT32 Crc32;
+ HashReg[0] = 0; HashReg[1] = 0; HashReg[2] = 0; HashReg[3] = 0;
+ for(j = 0; j < pDevice->McEntryCount; j++)
+ {
+ LM_UINT32 RegIndex;
+ LM_UINT32 Bitpos;
+ LM_UINT32 Crc32;
- Crc32 = ComputeCrc32(pDevice->McTable[j], ETHERNET_ADDRESS_SIZE);
+ Crc32 = ComputeCrc32(pDevice->McTable[j], ETHERNET_ADDRESS_SIZE);
- /* The most significant 7 bits of the CRC32 (no inversion), */
- /* are used to index into one of the possible 128 bit positions. */
- Bitpos = ~Crc32 & 0x7f;
+ /* The most significant 7 bits of the CRC32 (no inversion), */
+ /* are used to index into one of the possible 128 bit positions. */
+ Bitpos = ~Crc32 & 0x7f;
- /* Hash register index. */
- RegIndex = (Bitpos & 0x60) >> 5;
+ /* Hash register index. */
+ RegIndex = (Bitpos & 0x60) >> 5;
- /* Bit to turn on within a hash register. */
- Bitpos &= 0x1f;
+ /* Bit to turn on within a hash register. */
+ Bitpos &= 0x1f;
- /* Enable the multicast bit. */
- HashReg[RegIndex] |= (1 << Bitpos);
- }
+ /* Enable the multicast bit. */
+ HashReg[RegIndex] |= (1 << Bitpos);
+ }
- /* REV_AX has problem with multicast filtering where it uses both */
- /* DA and SA to perform hashing. */
- for(k = 0; k < 4; k++)
- {
- REG_WR(pDevice, MacCtrl.HashReg[k], HashReg[k]);
- }
+ /* REV_AX has problem with multicast filtering where it uses both */
+ /* DA and SA to perform hashing. */
+ for(k = 0; k < 4; k++)
+ {
+ REG_WR(pDevice, MacCtrl.HashReg[k], HashReg[k]);
+ }
}
else
{
- /* Reject all multicast frames. */
- for(j = 0; j < 4; j++)
- {
- REG_WR(pDevice, MacCtrl.HashReg[j], 0);
- }
+ /* Reject all multicast frames. */
+ for(j = 0; j < 4; j++)
+ {
+ REG_WR(pDevice, MacCtrl.HashReg[j], 0);
+ }
}
/* By default, Tigon3 will accept broadcast frames. We need to setup */
if(ReceiveMask & LM_ACCEPT_BROADCAST)
{
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
- REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
- REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
- REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
- REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
+ REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
+ REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
+ REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
+ REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
+ REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
+ REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
+ REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
+ REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
}
else
{
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
- REJECT_BROADCAST_RULE1_RULE);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
- REJECT_BROADCAST_RULE1_VALUE);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
- REJECT_BROADCAST_RULE2_RULE);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
- REJECT_BROADCAST_RULE2_VALUE);
+ REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
+ REJECT_BROADCAST_RULE1_RULE);
+ REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
+ REJECT_BROADCAST_RULE1_VALUE);
+ REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
+ REJECT_BROADCAST_RULE2_RULE);
+ REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
+ REJECT_BROADCAST_RULE2_VALUE);
}
/* disable the rest of the rules. */
for(j = RCV_LAST_RULE_IDX; j < 16; j++)
{
- REG_WR(pDevice, MacCtrl.RcvRules[j].Rule, 0);
- REG_WR(pDevice, MacCtrl.RcvRules[j].Value, 0);
+ REG_WR(pDevice, MacCtrl.RcvRules[j].Rule, 0);
+ REG_WR(pDevice, MacCtrl.RcvRules[j].Value, 0);
}
return LM_STATUS_SUCCESS;
} /* LM_SetReceiveMask */
-
/******************************************************************************/
/* Description: */
/* Disable the interrupt and put the transmitter and receiver engines in */
@@ -3584,15 +3574,15 @@
while(pPacket)
{
- pPacket->PacketStatus = LM_STATUS_TRANSMIT_ABORTED;
- pDevice->TxCounters.TxPacketAbortedCnt++;
+ pPacket->PacketStatus = LM_STATUS_TRANSMIT_ABORTED;
+ pDevice->TxCounters.TxPacketAbortedCnt++;
- atomic_add(pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
+ atomic_add(pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
- QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket);
+ QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket);
- pPacket = (PLM_PACKET)
- QQ_PopHead(&pDevice->TxPacketActiveQ.Container);
+ pPacket = (PLM_PACKET)
+ QQ_PopHead(&pDevice->TxPacketActiveQ.Container);
}
/* Cleanup the receive return rings. */
@@ -3602,38 +3592,38 @@
/* Doing so may cause system crash. */
if(!pDevice->ShuttingDown)
{
- /* Indicate packets to the protocol. */
- MM_IndicateTxPackets(pDevice);
+ /* Indicate packets to the protocol. */
+ MM_IndicateTxPackets(pDevice);
- /* Indicate received packets to the protocols. */
- MM_IndicateRxPackets(pDevice);
+ /* Indicate received packets to the protocols. */
+ MM_IndicateRxPackets(pDevice);
}
else
{
- /* Move the receive packet descriptors in the ReceivedQ to the */
- /* free queue. */
- for(; ;)
- {
- pPacket = (PLM_PACKET) QQ_PopHead(
- &pDevice->RxPacketReceivedQ.Container);
- if(pPacket == NULL)
- {
- break;
- }
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- }
+ /* Move the receive packet descriptors in the ReceivedQ to the */
+ /* free queue. */
+ for(; ;)
+ {
+ pPacket = (PLM_PACKET) QQ_PopHead(
+ &pDevice->RxPacketReceivedQ.Container);
+ if(pPacket == NULL)
+ {
+ break;
+ }
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ }
}
/* Clean up the Std Receive Producer ring. */
Idx = pDevice->pStatusBlkVirt->RcvStdConIdx;
while(Idx != pDevice->RxStdProdIdx) {
- pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) +
- MM_UINT_PTR(pDevice->pRxStdBdVirt[Idx].Opaque));
+ pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) +
+ MM_UINT_PTR(pDevice->pRxStdBdVirt[Idx].Opaque));
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- Idx = (Idx + 1) & T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
+ Idx = (Idx + 1) & T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
} /* while */
/* Reinitialize our copy of the indices. */
@@ -3644,12 +3634,12 @@
Idx = pDevice->pStatusBlkVirt->RcvJumboConIdx;
while(Idx != pDevice->RxJumboProdIdx) {
- pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) +
- MM_UINT_PTR(pDevice->pRxJumboBdVirt[Idx].Opaque));
+ pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) +
+ MM_UINT_PTR(pDevice->pRxJumboBdVirt[Idx].Opaque));
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- Idx = (Idx + 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
+ Idx = (Idx + 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
} /* while */
/* Reinitialize our copy of the indices. */
@@ -3668,7 +3658,6 @@
} /* LM_Abort */
-
/******************************************************************************/
/* Description: */
/* Disable the interrupt and put the transmitter and receiver engines in */
@@ -3692,22 +3681,22 @@
/* Make sure all the packets have been accounted for. */
for(EntryCnt = 0; EntryCnt < pDevice->RxPacketDescCnt; EntryCnt++)
{
- pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
- if (pPacket == 0)
- break;
+ pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
+ if (pPacket == 0)
+ break;
- MM_FreeRxBuffer(pDevice, pPacket);
+ MM_FreeRxBuffer(pDevice, pPacket);
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
+ QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
}
LM_ResetChip(pDevice);
/* Restore PCI configuration registers. */
MM_WriteConfig32(pDevice, PCI_CACHE_LINE_SIZE_REG,
- pDevice->SavedCacheLineReg);
+ pDevice->SavedCacheLineReg);
LM_RegWrInd(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG,
- (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId);
+ (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId);
/* Reprogram the MAC address. */
LM_SetMacAddress(pDevice, pDevice->NodeAddress);
@@ -3725,20 +3714,20 @@
/* Wait for access to the nvram interface before resetting. This is */
/* a workaround to prevent EEPROM corruption. */
if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
- T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701)
+ T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701)
{
- /* Request access to the flash interface. */
- REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_SET1);
+ /* Request access to the flash interface. */
+ REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_SET1);
- for(j = 0; j < 100000; j++)
- {
- Value32 = REG_RD(pDevice, Nvram.SwArb);
- if(Value32 & SW_ARB_GNT1)
- {
- break;
- }
- MM_Wait(10);
- }
+ for(j = 0; j < 100000; j++)
+ {
+ Value32 = REG_RD(pDevice, Nvram.SwArb);
+ if(Value32 & SW_ARB_GNT1)
+ {
+ break;
+ }
+ MM_Wait(10);
+ }
}
/* Global reset. */
@@ -3747,22 +3736,22 @@
/* make sure we re-enable indirect accesses */
MM_WriteConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG,
- pDevice->MiscHostCtrl);
+ pDevice->MiscHostCtrl);
/* Set MAX PCI retry to zero. */
Value32 = T3_PCI_STATE_PCI_ROM_ENABLE | T3_PCI_STATE_PCI_ROM_RETRY_ENABLE;
if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
{
- if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
- {
- Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
- }
+ if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
+ {
+ Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
+ }
}
MM_WriteConfig32(pDevice, T3_PCI_STATE_REG, Value32);
/* Restore PCI command register. */
MM_WriteConfig32(pDevice, PCI_COMMAND_REG,
- pDevice->PciCommandStatusWords);
+ pDevice->PciCommandStatusWords);
/* Disable PCI-X relaxed ordering bit. */
MM_ReadConfig32(pDevice, PCIX_CAP_REG, &Value32);
@@ -3773,15 +3762,15 @@
REG_WR(pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE);
#ifdef BIG_ENDIAN_PCI /* This from jfd */
- Value32 = GRC_MODE_WORD_SWAP_DATA|
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
+ Value32 = GRC_MODE_WORD_SWAP_DATA|
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
#else
#ifdef BIG_ENDIAN_HOST
/* Reconfigure the mode register. */
Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
- GRC_MODE_BYTE_SWAP_DATA |
- GRC_MODE_WORD_SWAP_DATA;
+ GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
+ GRC_MODE_BYTE_SWAP_DATA |
+ GRC_MODE_WORD_SWAP_DATA;
#else
/* Reconfigure the mode register. */
Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA;
@@ -3793,23 +3782,23 @@
MEM_WR_OFFSET(pDevice, 0x0b50, T3_MAGIC_NUM);
if(pDevice->EnableTbi) {
- pDevice->MacMode = MAC_MODE_PORT_MODE_TBI;
- REG_WR(pDevice, MacCtrl.Mode, MAC_MODE_PORT_MODE_TBI);
+ pDevice->MacMode = MAC_MODE_PORT_MODE_TBI;
+ REG_WR(pDevice, MacCtrl.Mode, MAC_MODE_PORT_MODE_TBI);
}
else {
- REG_WR(pDevice, MacCtrl.Mode, 0);
+ REG_WR(pDevice, MacCtrl.Mode, 0);
}
/* Wait for the firmware to finish initialization. */
for(j = 0; j < 100000; j++)
{
- MM_Wait(10);
+ MM_Wait(10);
- Value32 = MEM_RD_OFFSET(pDevice, 0x0b50);
- if(Value32 == ~T3_MAGIC_NUM)
- {
- break;
- }
+ Value32 = MEM_RD_OFFSET(pDevice, 0x0b50);
+ if(Value32 == ~T3_MAGIC_NUM)
+ {
+ break;
+ }
}
return LM_STATUS_SUCCESS;
}
@@ -3837,25 +3826,25 @@
/* descriptors that are between SwConIdx and HwConIdx. */
while(SwConIdx != HwConIdx)
{
- /* Get the packet that was sent from the TxPacketActiveQ. */
- pPacket = (PLM_PACKET) QQ_PopHead(
- &pDevice->TxPacketActiveQ.Container);
+ /* Get the packet that was sent from the TxPacketActiveQ. */
+ pPacket = (PLM_PACKET) QQ_PopHead(
+ &pDevice->TxPacketActiveQ.Container);
- /* Set the return status. */
- pPacket->PacketStatus = LM_STATUS_SUCCESS;
+ /* Set the return status. */
+ pPacket->PacketStatus = LM_STATUS_SUCCESS;
- /* Put the packet in the TxPacketXmittedQ for indication later. */
- QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket);
+ /* Put the packet in the TxPacketXmittedQ for indication later. */
+ QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket);
- /* Move to the next packet's BD. */
- SwConIdx = (SwConIdx + pPacket->u.Tx.FragCount) &
- T3_SEND_RCB_ENTRY_COUNT_MASK;
+ /* Move to the next packet's BD. */
+ SwConIdx = (SwConIdx + pPacket->u.Tx.FragCount) &
+ T3_SEND_RCB_ENTRY_COUNT_MASK;
- /* Update the number of unused BDs. */
- atomic_add(pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
+ /* Update the number of unused BDs. */
+ atomic_add(pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
- /* Get the new updated HwConIdx. */
- HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx;
+ /* Get the new updated HwConIdx. */
+ HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx;
} /* while */
/* Save the new SwConIdx. */
@@ -3864,7 +3853,6 @@
} /* LM_ServiceTxInterrupt */
-
/******************************************************************************/
/* Description: */
/* */
@@ -3884,89 +3872,89 @@
SwRcvRetConIdx = pDevice->RcvRetConIdx;
while(SwRcvRetConIdx != HwRcvRetProdIdx)
{
- pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx];
+ pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx];
- /* Get the received packet descriptor. */
- pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) +
- MM_UINT_PTR(pRcvBd->Opaque));
+ /* Get the received packet descriptor. */
+ pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) +
+ MM_UINT_PTR(pRcvBd->Opaque));
- /* Check the error flag. */
- if(pRcvBd->ErrorFlag &&
- pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII)
- {
- pPacket->PacketStatus = LM_STATUS_FAILURE;
+ /* Check the error flag. */
+ if(pRcvBd->ErrorFlag &&
+ pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII)
+ {
+ pPacket->PacketStatus = LM_STATUS_FAILURE;
- pDevice->RxCounters.RxPacketErrCnt++;
+ pDevice->RxCounters.RxPacketErrCnt++;
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC)
- {
- pDevice->RxCounters.RxErrCrcCnt++;
- }
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC)
+ {
+ pDevice->RxCounters.RxErrCrcCnt++;
+ }
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT)
- {
- pDevice->RxCounters.RxErrCollCnt++;
- }
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT)
+ {
+ pDevice->RxCounters.RxErrCollCnt++;
+ }
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT)
- {
- pDevice->RxCounters.RxErrLinkLostCnt++;
- }
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT)
+ {
+ pDevice->RxCounters.RxErrLinkLostCnt++;
+ }
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR)
- {
- pDevice->RxCounters.RxErrPhyDecodeCnt++;
- }
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR)
+ {
+ pDevice->RxCounters.RxErrPhyDecodeCnt++;
+ }
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII)
- {
- pDevice->RxCounters.RxErrOddNibbleCnt++;
- }
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII)
+ {
+ pDevice->RxCounters.RxErrOddNibbleCnt++;
+ }
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT)
- {
- pDevice->RxCounters.RxErrMacAbortCnt++;
- }
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT)
+ {
+ pDevice->RxCounters.RxErrMacAbortCnt++;
+ }
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64)
- {
- pDevice->RxCounters.RxErrShortPacketCnt++;
- }
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64)
+ {
+ pDevice->RxCounters.RxErrShortPacketCnt++;
+ }
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES)
- {
- pDevice->RxCounters.RxErrNoResourceCnt++;
- }
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES)
+ {
+ pDevice->RxCounters.RxErrNoResourceCnt++;
+ }
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD)
- {
- pDevice->RxCounters.RxErrLargePacketCnt++;
- }
- }
- else
- {
- pPacket->PacketStatus = LM_STATUS_SUCCESS;
- pPacket->PacketSize = pRcvBd->Len - 4;
+ if(pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD)
+ {
+ pDevice->RxCounters.RxErrLargePacketCnt++;
+ }
+ }
+ else
+ {
+ pPacket->PacketStatus = LM_STATUS_SUCCESS;
+ pPacket->PacketSize = pRcvBd->Len - 4;
- pPacket->Flags = pRcvBd->Flags;
- if(pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG)
- {
- pPacket->VlanTag = pRcvBd->VlanTag;
- }
+ pPacket->Flags = pRcvBd->Flags;
+ if(pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG)
+ {
+ pPacket->VlanTag = pRcvBd->VlanTag;
+ }
- pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum;
- }
+ pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum;
+ }
- /* Put the packet descriptor containing the received packet */
- /* buffer in the RxPacketReceivedQ for indication later. */
- QQ_PushTail(&pDevice->RxPacketReceivedQ.Container, pPacket);
+ /* Put the packet descriptor containing the received packet */
+ /* buffer in the RxPacketReceivedQ for indication later. */
+ QQ_PushTail(&pDevice->RxPacketReceivedQ.Container, pPacket);
- /* Go to the next buffer descriptor. */
- SwRcvRetConIdx = (SwRcvRetConIdx + 1) &
- T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK;
+ /* Go to the next buffer descriptor. */
+ SwRcvRetConIdx = (SwRcvRetConIdx + 1) &
+ T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK;
- /* Get the updated HwRcvRetProdIdx. */
- HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx;
+ /* Get the updated HwRcvRetProdIdx. */
+ HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx;
} /* while */
pDevice->RcvRetConIdx = SwRcvRetConIdx;
@@ -3976,7 +3964,6 @@
} /* LM_ServiceRxInterrupt */
-
/******************************************************************************/
/* Description: */
/* This is the interrupt event handler routine. It acknowledges all */
@@ -3995,37 +3982,37 @@
/* Setup the phy chip whenever the link status changes. */
if(pDevice->LinkChngMode == T3_LINK_CHNG_MODE_USE_STATUS_REG)
{
- Value32 = REG_RD(pDevice, MacCtrl.Status);
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT)
- {
- if (Value32 & MAC_STATUS_MI_INTERRUPT)
- {
- ServicePhyInt = TRUE;
- }
- }
- else if(Value32 & MAC_STATUS_LINK_STATE_CHANGED)
- {
- ServicePhyInt = TRUE;
- }
+ Value32 = REG_RD(pDevice, MacCtrl.Status);
+ if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT)
+ {
+ if (Value32 & MAC_STATUS_MI_INTERRUPT)
+ {
+ ServicePhyInt = TRUE;
+ }
+ }
+ else if(Value32 & MAC_STATUS_LINK_STATE_CHANGED)
+ {
+ ServicePhyInt = TRUE;
+ }
}
else
{
- if(pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_LINK_CHANGED_STATUS)
- {
- pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
- (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS);
- ServicePhyInt = TRUE;
- }
+ if(pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_LINK_CHANGED_STATUS)
+ {
+ pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
+ (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS);
+ ServicePhyInt = TRUE;
+ }
}
#if INCLUDE_TBI_SUPPORT
if (pDevice->IgnoreTbiLinkChange == TRUE)
{
- ServicePhyInt = FALSE;
+ ServicePhyInt = FALSE;
}
#endif
if (ServicePhyInt == TRUE)
{
- LM_SetupPhy(pDevice);
+ LM_SetupPhy(pDevice);
}
/* Service receive and transmit interrupts. */
@@ -4035,22 +4022,21 @@
/* No spinlock for this queue since this routine is serialized. */
if(!QQ_Empty(&pDevice->RxPacketReceivedQ.Container))
{
- /* Indicate receive packets. */
- MM_IndicateRxPackets(pDevice);
+ /* Indicate receive packets. */
+ MM_IndicateRxPackets(pDevice);
/* LM_QueueRxPackets(pDevice); */
}
/* No spinlock for this queue since this routine is serialized. */
if(!QQ_Empty(&pDevice->TxPacketXmittedQ.Container))
{
- MM_IndicateTxPackets(pDevice);
+ MM_IndicateTxPackets(pDevice);
}
return LM_STATUS_SUCCESS;
} /* LM_ServiceInterrupts */
-
/******************************************************************************/
/* Description: */
/* */
@@ -4066,20 +4052,20 @@
pEntry = pDevice->McTable[0];
for(j = 0; j < pDevice->McEntryCount; j++)
{
- if(IS_ETH_ADDRESS_EQUAL(pEntry, pMcAddress))
- {
- /* Found a match, increment the instance count. */
- pEntry[LM_MC_INSTANCE_COUNT_INDEX] += 1;
+ if(IS_ETH_ADDRESS_EQUAL(pEntry, pMcAddress))
+ {
+ /* Found a match, increment the instance count. */
+ pEntry[LM_MC_INSTANCE_COUNT_INDEX] += 1;
- return LM_STATUS_SUCCESS;
- }
+ return LM_STATUS_SUCCESS;
+ }
- pEntry += LM_MC_ENTRY_SIZE;
+ pEntry += LM_MC_ENTRY_SIZE;
}
if(pDevice->McEntryCount >= LM_MAX_MC_TABLE_SIZE)
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
pEntry = pDevice->McTable[pDevice->McEntryCount];
@@ -4095,7 +4081,6 @@
} /* LM_MulticastAdd */
-
/******************************************************************************/
/* Description: */
/* */
@@ -4111,43 +4096,42 @@
pEntry = pDevice->McTable[0];
for(j = 0; j < pDevice->McEntryCount; j++)
{
- if(IS_ETH_ADDRESS_EQUAL(pEntry, pMcAddress))
- {
- /* Found a match, decrement the instance count. */
- pEntry[LM_MC_INSTANCE_COUNT_INDEX] -= 1;
+ if(IS_ETH_ADDRESS_EQUAL(pEntry, pMcAddress))
+ {
+ /* Found a match, decrement the instance count. */
+ pEntry[LM_MC_INSTANCE_COUNT_INDEX] -= 1;
- /* No more instance left, remove the address from the table. */
- /* Move the last entry in the table to the delete slot. */
- if(pEntry[LM_MC_INSTANCE_COUNT_INDEX] == 0 &&
- pDevice->McEntryCount > 1)
- {
+ /* No more instance left, remove the address from the table. */
+ /* Move the last entry in the table to the delete slot. */
+ if(pEntry[LM_MC_INSTANCE_COUNT_INDEX] == 0 &&
+ pDevice->McEntryCount > 1)
+ {
- COPY_ETH_ADDRESS(
- pDevice->McTable[pDevice->McEntryCount-1], pEntry);
- pEntry[LM_MC_INSTANCE_COUNT_INDEX] =
- pDevice->McTable[pDevice->McEntryCount-1]
- [LM_MC_INSTANCE_COUNT_INDEX];
- }
- pDevice->McEntryCount--;
+ COPY_ETH_ADDRESS(
+ pDevice->McTable[pDevice->McEntryCount-1], pEntry);
+ pEntry[LM_MC_INSTANCE_COUNT_INDEX] =
+ pDevice->McTable[pDevice->McEntryCount-1]
+ [LM_MC_INSTANCE_COUNT_INDEX];
+ }
+ pDevice->McEntryCount--;
- /* Update the receive mask if the table is empty. */
- if(pDevice->McEntryCount == 0)
- {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask & ~LM_ACCEPT_MULTICAST);
- }
+ /* Update the receive mask if the table is empty. */
+ if(pDevice->McEntryCount == 0)
+ {
+ LM_SetReceiveMask(pDevice,
+ pDevice->ReceiveMask & ~LM_ACCEPT_MULTICAST);
+ }
- return LM_STATUS_SUCCESS;
- }
+ return LM_STATUS_SUCCESS;
+ }
- pEntry += LM_MC_ENTRY_SIZE;
+ pEntry += LM_MC_ENTRY_SIZE;
}
return LM_STATUS_FAILURE;
} /* LM_MulticastDel */
-
/******************************************************************************/
/* Description: */
/* */
@@ -4164,7 +4148,6 @@
} /* LM_MulticastClear */
-
/******************************************************************************/
/* Description: */
/* */
@@ -4179,11 +4162,11 @@
for(j = 0; j < 4; j++)
{
- REG_WR(pDevice, MacCtrl.MacAddr[j].High,
- (pMacAddress[0] << 8) | pMacAddress[1]);
- REG_WR(pDevice, MacCtrl.MacAddr[j].Low,
- (pMacAddress[2] << 24) | (pMacAddress[3] << 16) |
- (pMacAddress[4] << 8) | pMacAddress[5]);
+ REG_WR(pDevice, MacCtrl.MacAddr[j].High,
+ (pMacAddress[0] << 8) | pMacAddress[1]);
+ REG_WR(pDevice, MacCtrl.MacAddr[j].Low,
+ (pMacAddress[2] << 24) | (pMacAddress[3] << 16) |
+ (pMacAddress[4] << 8) | pMacAddress[5]);
}
return LM_STATUS_SUCCESS;
@@ -4210,78 +4193,78 @@
/* determine media type */
switch(RequestedMediaType) {
- case LM_REQUESTED_MEDIA_TYPE_BNC:
- *pMediaType = LM_MEDIA_TYPE_BNC;
- *pLineSpeed = LM_LINE_SPEED_10MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_BNC:
+ *pMediaType = LM_MEDIA_TYPE_BNC;
+ *pLineSpeed = LM_LINE_SPEED_10MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_UTP_AUTO:
- *pMediaType = LM_MEDIA_TYPE_UTP;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_UTP_AUTO:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS:
- *pMediaType = LM_MEDIA_TYPE_UTP;
- *pLineSpeed = LM_LINE_SPEED_10MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_10MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX:
- *pMediaType = LM_MEDIA_TYPE_UTP;
- *pLineSpeed = LM_LINE_SPEED_10MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_10MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS:
- *pMediaType = LM_MEDIA_TYPE_UTP;
- *pLineSpeed = LM_LINE_SPEED_100MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_100MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX:
- *pMediaType = LM_MEDIA_TYPE_UTP;
- *pLineSpeed = LM_LINE_SPEED_100MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_100MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS:
- *pMediaType = LM_MEDIA_TYPE_UTP;
- *pLineSpeed = LM_LINE_SPEED_1000MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_1000MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX:
- *pMediaType = LM_MEDIA_TYPE_UTP;
- *pLineSpeed = LM_LINE_SPEED_1000MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_UTP;
+ *pLineSpeed = LM_LINE_SPEED_1000MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS:
- *pMediaType = LM_MEDIA_TYPE_FIBER;
- *pLineSpeed = LM_LINE_SPEED_100MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS:
+ *pMediaType = LM_MEDIA_TYPE_FIBER;
+ *pLineSpeed = LM_LINE_SPEED_100MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX:
- *pMediaType = LM_MEDIA_TYPE_FIBER;
- *pLineSpeed = LM_LINE_SPEED_100MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_FIBER;
+ *pLineSpeed = LM_LINE_SPEED_100MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS:
- *pMediaType = LM_MEDIA_TYPE_FIBER;
- *pLineSpeed = LM_LINE_SPEED_1000MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS:
+ *pMediaType = LM_MEDIA_TYPE_FIBER;
+ *pLineSpeed = LM_LINE_SPEED_1000MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX:
- *pMediaType = LM_MEDIA_TYPE_FIBER;
- *pLineSpeed = LM_LINE_SPEED_1000MBPS;
- *pDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
+ case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX:
+ *pMediaType = LM_MEDIA_TYPE_FIBER;
+ *pLineSpeed = LM_LINE_SPEED_1000MBPS;
+ *pDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
- default:
- break;
+ default:
+ break;
} /* switch */
return LM_STATUS_SUCCESS;
@@ -4309,92 +4292,92 @@
#endif
if((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
{
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- if(!pDevice->InitDone)
- {
- Value32 = 0;
- }
+ if(!pDevice->InitDone)
+ {
+ Value32 = 0;
+ }
- if(!(Value32 & PHY_STATUS_LINK_PASS))
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20);
+ if(!(Value32 & PHY_STATUS_LINK_PASS))
+ {
+ LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- for(j = 0; j < 1000; j++)
- {
- MM_Wait(10);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ for(j = 0; j < 1000; j++)
+ {
+ MM_Wait(10);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- if(Value32 & PHY_STATUS_LINK_PASS)
- {
- MM_Wait(40);
- break;
- }
- }
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ if(Value32 & PHY_STATUS_LINK_PASS)
+ {
+ MM_Wait(40);
+ break;
+ }
+ }
- if((pDevice->PhyId & PHY_ID_REV_MASK) == PHY_BCM5401_B0_REV)
- {
- if(!(Value32 & PHY_STATUS_LINK_PASS) &&
- (pDevice->OldLineSpeed == LM_LINE_SPEED_1000MBPS))
- {
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET);
- for(j = 0; j < 100; j++)
- {
- MM_Wait(10);
+ if((pDevice->PhyId & PHY_ID_REV_MASK) == PHY_BCM5401_B0_REV)
+ {
+ if(!(Value32 & PHY_STATUS_LINK_PASS) &&
+ (pDevice->OldLineSpeed == LM_LINE_SPEED_1000MBPS))
+ {
+ LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET);
+ for(j = 0; j < 100; j++)
+ {
+ MM_Wait(10);
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if(!(Value32 & PHY_CTRL_PHY_RESET))
- {
- MM_Wait(40);
- break;
- }
- }
+ LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
+ if(!(Value32 & PHY_CTRL_PHY_RESET))
+ {
+ MM_Wait(40);
+ break;
+ }
+ }
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20);
+ LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0c20);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232);
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
- }
- }
- }
+ LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
+ LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
+ }
+ }
+ }
}
else if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
{
- /* Bug: 5701 A0, B0 TX CRC workaround. */
- LM_WritePhy(pDevice, 0x15, 0x0a75);
- LM_WritePhy(pDevice, 0x1c, 0x8c68);
- LM_WritePhy(pDevice, 0x1c, 0x8d68);
- LM_WritePhy(pDevice, 0x1c, 0x8c68);
+ /* Bug: 5701 A0, B0 TX CRC workaround. */
+ LM_WritePhy(pDevice, 0x15, 0x0a75);
+ LM_WritePhy(pDevice, 0x1c, 0x8c68);
+ LM_WritePhy(pDevice, 0x1c, 0x8d68);
+ LM_WritePhy(pDevice, 0x1c, 0x8c68);
}
/* Acknowledge interrupts. */
@@ -4404,22 +4387,22 @@
/* Configure the interrupt mask. */
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT)
{
- LM_WritePhy(pDevice, BCM540X_INT_MASK_REG, ~BCM540X_INT_LINK_CHANGE);
+ LM_WritePhy(pDevice, BCM540X_INT_MASK_REG, ~BCM540X_INT_LINK_CHANGE);
}
/* Configure PHY led mode. */
if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701 ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700))
+ (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700))
{
- if(pDevice->LedMode == LED_MODE_THREE_LINK)
- {
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG,
- BCM540X_EXT_CTRL_LINK3_LED_MODE);
- }
- else
- {
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, 0);
- }
+ if(pDevice->LedMode == LED_MODE_THREE_LINK)
+ {
+ LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG,
+ BCM540X_EXT_CTRL_LINK3_LED_MODE);
+ }
+ else
+ {
+ LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, 0);
+ }
}
CurrentLinkStatus = LM_STATUS_LINK_DOWN;
@@ -4427,148 +4410,148 @@
/* Get current link and duplex mode. */
for(j = 0; j < 100; j++)
{
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- if(Value32 & PHY_STATUS_LINK_PASS)
- {
- break;
- }
- MM_Wait(40);
+ if(Value32 & PHY_STATUS_LINK_PASS)
+ {
+ break;
+ }
+ MM_Wait(40);
}
if(Value32 & PHY_STATUS_LINK_PASS)
{
- /* Determine the current line and duplex settings. */
- LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32);
- for(j = 0; j < 2000; j++)
- {
- MM_Wait(10);
+ /* Determine the current line and duplex settings. */
+ LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32);
+ for(j = 0; j < 2000; j++)
+ {
+ MM_Wait(10);
- LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32);
- if(Value32)
- {
- break;
- }
- }
+ LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32);
+ if(Value32)
+ {
+ break;
+ }
+ }
- switch(Value32 & BCM540X_AUX_SPEED_MASK)
- {
- case BCM540X_AUX_10BASET_HD:
- CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ switch(Value32 & BCM540X_AUX_SPEED_MASK)
+ {
+ case BCM540X_AUX_10BASET_HD:
+ CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case BCM540X_AUX_10BASET_FD:
- CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
+ case BCM540X_AUX_10BASET_FD:
+ CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
- case BCM540X_AUX_100BASETX_HD:
- CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ case BCM540X_AUX_100BASETX_HD:
+ CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case BCM540X_AUX_100BASETX_FD:
- CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
+ case BCM540X_AUX_100BASETX_FD:
+ CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
- case BCM540X_AUX_100BASET_HD:
- CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
+ case BCM540X_AUX_100BASET_HD:
+ CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
+ break;
- case BCM540X_AUX_100BASET_FD:
- CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
+ case BCM540X_AUX_100BASET_FD:
+ CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
+ CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
+ break;
- default:
+ default:
- CurrentLineSpeed = LM_LINE_SPEED_UNKNOWN;
- CurrentDuplexMode = LM_DUPLEX_MODE_UNKNOWN;
- break;
- }
+ CurrentLineSpeed = LM_LINE_SPEED_UNKNOWN;
+ CurrentDuplexMode = LM_DUPLEX_MODE_UNKNOWN;
+ break;
+ }
- /* Make sure we are in auto-neg mode. */
- for (j = 0; j < 200; j++)
- {
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if(Value32 && Value32 != 0x7fff)
- {
- break;
- }
+ /* Make sure we are in auto-neg mode. */
+ for (j = 0; j < 200; j++)
+ {
+ LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
+ if(Value32 && Value32 != 0x7fff)
+ {
+ break;
+ }
- if(Value32 == 0 && pDevice->RequestedMediaType ==
- LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS)
- {
- break;
- }
+ if(Value32 == 0 && pDevice->RequestedMediaType ==
+ LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS)
+ {
+ break;
+ }
- MM_Wait(10);
- }
+ MM_Wait(10);
+ }
- /* Use the current line settings for "auto" mode. */
- if(pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO ||
- pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO)
- {
- if(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)
- {
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ /* Use the current line settings for "auto" mode. */
+ if(pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO ||
+ pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO)
+ {
+ if(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- /* We may be exiting low power mode and the link is in */
- /* 10mb. In this case, we need to restart autoneg. */
- LM_ReadPhy(pDevice, BCM540X_1000BASET_CTRL_REG, &Value32);
- pDevice->advertising1000 = Value32;
- /* 5702FE supports 10/100Mb only. */
- if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5703 ||
- pDevice->BondId != GRC_MISC_BD_ID_5702FE)
- {
- if(!(Value32 & (BCM540X_AN_AD_1000BASET_HALF |
- BCM540X_AN_AD_1000BASET_FULL)))
- {
- CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
- }
- else
- {
- CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
- else
- {
- /* Force line settings. */
- /* Use the current setting if it matches the user's requested */
- /* setting. */
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if((pDevice->LineSpeed == CurrentLineSpeed) &&
- (pDevice->DuplexMode == CurrentDuplexMode))
- {
- if ((pDevice->DisableAutoNeg &&
- !(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)) ||
- (!pDevice->DisableAutoNeg &&
- (Value32 & PHY_CTRL_AUTO_NEG_ENABLE)))
- {
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- else
- {
- CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
- else
- {
- CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
+ /* We may be exiting low power mode and the link is in */
+ /* 10mb. In this case, we need to restart autoneg. */
+ LM_ReadPhy(pDevice, BCM540X_1000BASET_CTRL_REG, &Value32);
+ pDevice->advertising1000 = Value32;
+ /* 5702FE supports 10/100Mb only. */
+ if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5703 ||
+ pDevice->BondId != GRC_MISC_BD_ID_5702FE)
+ {
+ if(!(Value32 & (BCM540X_AN_AD_1000BASET_HALF |
+ BCM540X_AN_AD_1000BASET_FULL)))
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
+ }
+ }
+ }
+ else
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
+ }
+ }
+ else
+ {
+ /* Force line settings. */
+ /* Use the current setting if it matches the user's requested */
+ /* setting. */
+ LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
+ if((pDevice->LineSpeed == CurrentLineSpeed) &&
+ (pDevice->DuplexMode == CurrentDuplexMode))
+ {
+ if ((pDevice->DisableAutoNeg &&
+ !(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)) ||
+ (!pDevice->DisableAutoNeg &&
+ (Value32 & PHY_CTRL_AUTO_NEG_ENABLE)))
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ }
+ else
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
+ }
+ }
+ else
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
+ }
+ }
- /* Save line settings. */
- pDevice->LineSpeed = CurrentLineSpeed;
- pDevice->DuplexMode = CurrentDuplexMode;
- pDevice->MediaType = LM_MEDIA_TYPE_UTP;
+ /* Save line settings. */
+ pDevice->LineSpeed = CurrentLineSpeed;
+ pDevice->DuplexMode = CurrentDuplexMode;
+ pDevice->MediaType = LM_MEDIA_TYPE_UTP;
}
return CurrentLinkStatus;
@@ -4593,51 +4576,51 @@
/* See Table 28B-3 of 802.3ab-1999 spec. */
if(pDevice->FlowControlCap & LM_FLOW_CONTROL_AUTO_PAUSE)
{
- if(LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE)
- {
- if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE)
- {
- if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE)
- {
- FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE |
- LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- else if(RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE)
- {
- FlowCap = LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- }
- else
- {
- if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE)
- {
- FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE |
- LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- }
- }
- else if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE)
- {
- if((RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) &&
- (RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE))
- {
- FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE;
- }
- }
+ if(LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE)
+ {
+ if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE)
+ {
+ if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE)
+ {
+ FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE |
+ LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ else if(RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE)
+ {
+ FlowCap = LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ }
+ else
+ {
+ if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE)
+ {
+ FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE |
+ LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ }
+ }
+ }
+ else if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE)
+ {
+ if((RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) &&
+ (RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE))
+ {
+ FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE;
+ }
+ }
}
else
{
- FlowCap = pDevice->FlowControlCap;
+ FlowCap = pDevice->FlowControlCap;
}
/* Enable/disable rx PAUSE. */
pDevice->RxMode &= ~RX_MODE_ENABLE_FLOW_CONTROL;
if(FlowCap & LM_FLOW_CONTROL_RECEIVE_PAUSE &&
- (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
- pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE))
+ (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
+ pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE))
{
- pDevice->FlowControl |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
- pDevice->RxMode |= RX_MODE_ENABLE_FLOW_CONTROL;
+ pDevice->FlowControl |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
+ pDevice->RxMode |= RX_MODE_ENABLE_FLOW_CONTROL;
}
REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
@@ -4645,11 +4628,11 @@
/* Enable/disable tx PAUSE. */
pDevice->TxMode &= ~TX_MODE_ENABLE_FLOW_CONTROL;
if(FlowCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE &&
- (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
- pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE))
+ (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
+ pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE))
{
- pDevice->FlowControl |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
- pDevice->TxMode |= TX_MODE_ENABLE_FLOW_CONTROL;
+ pDevice->FlowControl |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
+ pDevice->TxMode |= TX_MODE_ENABLE_FLOW_CONTROL;
}
REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode);
@@ -4676,51 +4659,50 @@
/* Reset the SERDES during init and when we have link. */
if(!pDevice->InitDone || Value32 & MAC_STATUS_PCS_SYNCED)
{
- /* Set PLL lock range. */
- LM_WritePhy(pDevice, 0x16, 0x8007);
+ /* Set PLL lock range. */
+ LM_WritePhy(pDevice, 0x16, 0x8007);
- /* Software reset. */
- LM_WritePhy(pDevice, 0x00, 0x8000);
+ /* Software reset. */
+ LM_WritePhy(pDevice, 0x00, 0x8000);
- /* Wait for reset to complete. */
- for(j = 0; j < 500; j++)
- {
- MM_Wait(10);
- }
+ /* Wait for reset to complete. */
+ for(j = 0; j < 500; j++)
+ {
+ MM_Wait(10);
+ }
- /* Config mode; seletct PMA/Ch 1 regs. */
- LM_WritePhy(pDevice, 0x10, 0x8411);
+ /* Config mode; seletct PMA/Ch 1 regs. */
+ LM_WritePhy(pDevice, 0x10, 0x8411);
- /* Enable auto-lock and comdet, select txclk for tx. */
- LM_WritePhy(pDevice, 0x11, 0x0a10);
+ /* Enable auto-lock and comdet, select txclk for tx. */
+ LM_WritePhy(pDevice, 0x11, 0x0a10);
- LM_WritePhy(pDevice, 0x18, 0x00a0);
- LM_WritePhy(pDevice, 0x16, 0x41ff);
+ LM_WritePhy(pDevice, 0x18, 0x00a0);
+ LM_WritePhy(pDevice, 0x16, 0x41ff);
- /* Assert and deassert POR. */
- LM_WritePhy(pDevice, 0x13, 0x0400);
- MM_Wait(40);
- LM_WritePhy(pDevice, 0x13, 0x0000);
+ /* Assert and deassert POR. */
+ LM_WritePhy(pDevice, 0x13, 0x0400);
+ MM_Wait(40);
+ LM_WritePhy(pDevice, 0x13, 0x0000);
- LM_WritePhy(pDevice, 0x11, 0x0a50);
- MM_Wait(40);
- LM_WritePhy(pDevice, 0x11, 0x0a10);
+ LM_WritePhy(pDevice, 0x11, 0x0a50);
+ MM_Wait(40);
+ LM_WritePhy(pDevice, 0x11, 0x0a10);
- /* Delay for signal to stabilize. */
- for(j = 0; j < 15000; j++)
- {
- MM_Wait(10);
- }
+ /* Delay for signal to stabilize. */
+ for(j = 0; j < 15000; j++)
+ {
+ MM_Wait(10);
+ }
- /* Deselect the channel register so we can read the PHY id later. */
- LM_WritePhy(pDevice, 0x10, 0x8011);
+ /* Deselect the channel register so we can read the PHY id later. */
+ LM_WritePhy(pDevice, 0x10, 0x8011);
}
return LM_STATUS_SUCCESS;
}
-
/******************************************************************************/
/* Description: */
/* */
@@ -4748,12 +4730,12 @@
/* Initialize the BCM8002 SERDES PHY. */
switch(pDevice->PhyId & PHY_ID_MASK)
{
- case PHY_BCM8002_PHY_ID:
- LM_InitBcm800xPhy(pDevice);
- break;
+ case PHY_BCM8002_PHY_ID:
+ LM_InitBcm800xPhy(pDevice);
+ break;
- default:
- break;
+ default:
+ break;
}
/* Enable link change interrupt. */
@@ -4766,218 +4748,218 @@
Value32 = REG_RD(pDevice, MacCtrl.Status);
if(Value32 & MAC_STATUS_PCS_SYNCED)
{
- if((pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO) ||
- (pDevice->DisableAutoNeg == FALSE))
- {
- /* auto-negotiation mode. */
- /* Initialize the autoneg default capaiblities. */
- AutonegInit(&pDevice->AnInfo);
+ if((pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO) ||
+ (pDevice->DisableAutoNeg == FALSE))
+ {
+ /* auto-negotiation mode. */
+ /* Initialize the autoneg default capaiblities. */
+ AutonegInit(&pDevice->AnInfo);
- /* Set the context pointer to point to the main device structure. */
- pDevice->AnInfo.pContext = pDevice;
+ /* Set the context pointer to point to the main device structure. */
+ pDevice->AnInfo.pContext = pDevice;
- /* Setup flow control advertisement register. */
- Value32 = GetPhyAdFlowCntrlSettings(pDevice);
- if(Value32 & PHY_AN_AD_PAUSE_CAPABLE)
- {
- pDevice->AnInfo.mr_adv_sym_pause = 1;
- }
- else
- {
- pDevice->AnInfo.mr_adv_sym_pause = 0;
- }
+ /* Setup flow control advertisement register. */
+ Value32 = GetPhyAdFlowCntrlSettings(pDevice);
+ if(Value32 & PHY_AN_AD_PAUSE_CAPABLE)
+ {
+ pDevice->AnInfo.mr_adv_sym_pause = 1;
+ }
+ else
+ {
+ pDevice->AnInfo.mr_adv_sym_pause = 0;
+ }
- if(Value32 & PHY_AN_AD_ASYM_PAUSE)
- {
- pDevice->AnInfo.mr_adv_asym_pause = 1;
- }
- else
- {
- pDevice->AnInfo.mr_adv_asym_pause = 0;
- }
+ if(Value32 & PHY_AN_AD_ASYM_PAUSE)
+ {
+ pDevice->AnInfo.mr_adv_asym_pause = 1;
+ }
+ else
+ {
+ pDevice->AnInfo.mr_adv_asym_pause = 0;
+ }
- /* Try to autoneg up to six times. */
- if (pDevice->IgnoreTbiLinkChange)
- {
- Cnt = 1;
- }
- else
- {
- Cnt = 6;
- }
- for (j = 0; j < Cnt; j++)
- {
- REG_WR(pDevice, MacCtrl.TxAutoNeg, 0);
+ /* Try to autoneg up to six times. */
+ if (pDevice->IgnoreTbiLinkChange)
+ {
+ Cnt = 1;
+ }
+ else
+ {
+ Cnt = 6;
+ }
+ for (j = 0; j < Cnt; j++)
+ {
+ REG_WR(pDevice, MacCtrl.TxAutoNeg, 0);
- Value32 = pDevice->MacMode & ~MAC_MODE_PORT_MODE_MASK;
- REG_WR(pDevice, MacCtrl.Mode, Value32);
- MM_Wait(20);
+ Value32 = pDevice->MacMode & ~MAC_MODE_PORT_MODE_MASK;
+ REG_WR(pDevice, MacCtrl.Mode, Value32);
+ MM_Wait(20);
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
- MAC_MODE_SEND_CONFIGS);
+ REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
+ MAC_MODE_SEND_CONFIGS);
- MM_Wait(20);
+ MM_Wait(20);
- pDevice->AnInfo.State = AN_STATE_UNKNOWN;
- pDevice->AnInfo.CurrentTime_us = 0;
+ pDevice->AnInfo.State = AN_STATE_UNKNOWN;
+ pDevice->AnInfo.CurrentTime_us = 0;
- REG_WR(pDevice, Grc.Timer, 0);
- for(k = 0; (pDevice->AnInfo.CurrentTime_us < 75000) &&
- (k < 75000); k++)
- {
- AnStatus = Autoneg8023z(&pDevice->AnInfo);
+ REG_WR(pDevice, Grc.Timer, 0);
+ for(k = 0; (pDevice->AnInfo.CurrentTime_us < 75000) &&
+ (k < 75000); k++)
+ {
+ AnStatus = Autoneg8023z(&pDevice->AnInfo);
- if((AnStatus == AUTONEG_STATUS_DONE) ||
- (AnStatus == AUTONEG_STATUS_FAILED))
- {
- break;
- }
+ if((AnStatus == AUTONEG_STATUS_DONE) ||
+ (AnStatus == AUTONEG_STATUS_FAILED))
+ {
+ break;
+ }
- pDevice->AnInfo.CurrentTime_us = REG_RD(pDevice, Grc.Timer);
+ pDevice->AnInfo.CurrentTime_us = REG_RD(pDevice, Grc.Timer);
- }
- if((AnStatus == AUTONEG_STATUS_DONE) ||
- (AnStatus == AUTONEG_STATUS_FAILED))
- {
- break;
- }
- if (j >= 1)
- {
- if (!(REG_RD(pDevice, MacCtrl.Status) &
- MAC_STATUS_PCS_SYNCED)) {
- break;
- }
- }
- }
+ }
+ if((AnStatus == AUTONEG_STATUS_DONE) ||
+ (AnStatus == AUTONEG_STATUS_FAILED))
+ {
+ break;
+ }
+ if (j >= 1)
+ {
+ if (!(REG_RD(pDevice, MacCtrl.Status) &
+ MAC_STATUS_PCS_SYNCED)) {
+ break;
+ }
+ }
+ }
- /* Stop sending configs. */
- MM_AnTxIdle(&pDevice->AnInfo);
+ /* Stop sending configs. */
+ MM_AnTxIdle(&pDevice->AnInfo);
- /* Resolve flow control settings. */
- if((AnStatus == AUTONEG_STATUS_DONE) &&
- pDevice->AnInfo.mr_an_complete && pDevice->AnInfo.mr_link_ok &&
- pDevice->AnInfo.mr_lp_adv_full_duplex)
- {
- LM_UINT32 RemotePhyAd;
- LM_UINT32 LocalPhyAd;
+ /* Resolve flow control settings. */
+ if((AnStatus == AUTONEG_STATUS_DONE) &&
+ pDevice->AnInfo.mr_an_complete && pDevice->AnInfo.mr_link_ok &&
+ pDevice->AnInfo.mr_lp_adv_full_duplex)
+ {
+ LM_UINT32 RemotePhyAd;
+ LM_UINT32 LocalPhyAd;
- LocalPhyAd = 0;
- if(pDevice->AnInfo.mr_adv_sym_pause)
- {
- LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE;
- }
+ LocalPhyAd = 0;
+ if(pDevice->AnInfo.mr_adv_sym_pause)
+ {
+ LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE;
+ }
- if(pDevice->AnInfo.mr_adv_asym_pause)
- {
- LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE;
- }
+ if(pDevice->AnInfo.mr_adv_asym_pause)
+ {
+ LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE;
+ }
- RemotePhyAd = 0;
- if(pDevice->AnInfo.mr_lp_adv_sym_pause)
- {
- RemotePhyAd |= PHY_LINK_PARTNER_PAUSE_CAPABLE;
- }
+ RemotePhyAd = 0;
+ if(pDevice->AnInfo.mr_lp_adv_sym_pause)
+ {
+ RemotePhyAd |= PHY_LINK_PARTNER_PAUSE_CAPABLE;
+ }
- if(pDevice->AnInfo.mr_lp_adv_asym_pause)
- {
- RemotePhyAd |= PHY_LINK_PARTNER_ASYM_PAUSE;
- }
+ if(pDevice->AnInfo.mr_lp_adv_asym_pause)
+ {
+ RemotePhyAd |= PHY_LINK_PARTNER_ASYM_PAUSE;
+ }
- LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd);
+ LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd);
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- for (j = 0; j < 30; j++)
- {
- MM_Wait(20);
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
- MM_Wait(20);
- if ((REG_RD(pDevice, MacCtrl.Status) &
- (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0)
- break;
- }
- if (pDevice->PollTbiLink)
- {
- Value32 = REG_RD(pDevice, MacCtrl.Status);
- if (Value32 & MAC_STATUS_RECEIVING_CFG)
- {
- pDevice->IgnoreTbiLinkChange = TRUE;
- }
- else
- {
- pDevice->IgnoreTbiLinkChange = FALSE;
- }
- }
- Value32 = REG_RD(pDevice, MacCtrl.Status);
- if (CurrentLinkStatus == LM_STATUS_LINK_DOWN &&
- (Value32 & MAC_STATUS_PCS_SYNCED) &&
- ((Value32 & MAC_STATUS_RECEIVING_CFG) == 0))
- {
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- }
- else
- {
- /* We are forcing line speed. */
- pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE;
- LM_SetFlowControl(pDevice, 0, 0);
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ }
+ for (j = 0; j < 30; j++)
+ {
+ MM_Wait(20);
+ REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED);
+ MM_Wait(20);
+ if ((REG_RD(pDevice, MacCtrl.Status) &
+ (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0)
+ break;
+ }
+ if (pDevice->PollTbiLink)
+ {
+ Value32 = REG_RD(pDevice, MacCtrl.Status);
+ if (Value32 & MAC_STATUS_RECEIVING_CFG)
+ {
+ pDevice->IgnoreTbiLinkChange = TRUE;
+ }
+ else
+ {
+ pDevice->IgnoreTbiLinkChange = FALSE;
+ }
+ }
+ Value32 = REG_RD(pDevice, MacCtrl.Status);
+ if (CurrentLinkStatus == LM_STATUS_LINK_DOWN &&
+ (Value32 & MAC_STATUS_PCS_SYNCED) &&
+ ((Value32 & MAC_STATUS_RECEIVING_CFG) == 0))
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ }
+ }
+ else
+ {
+ /* We are forcing line speed. */
+ pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE;
+ LM_SetFlowControl(pDevice, 0, 0);
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
- MAC_MODE_SEND_CONFIGS);
- }
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
+ MAC_MODE_SEND_CONFIGS);
+ }
}
/* Set the link polarity bit. */
pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
- (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS);
+ (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS);
for (j = 0; j < 100; j++)
{
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
- MM_Wait(5);
- if ((REG_RD(pDevice, MacCtrl.Status) &
- (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0)
- break;
+ REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED);
+ MM_Wait(5);
+ if ((REG_RD(pDevice, MacCtrl.Status) &
+ (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0)
+ break;
}
Value32 = REG_RD(pDevice, MacCtrl.Status);
if((Value32 & MAC_STATUS_PCS_SYNCED) == 0)
{
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
- if (pDevice->DisableAutoNeg == FALSE)
- {
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
- MAC_MODE_SEND_CONFIGS);
- MM_Wait(1);
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- }
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+ if (pDevice->DisableAutoNeg == FALSE)
+ {
+ REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
+ MAC_MODE_SEND_CONFIGS);
+ MM_Wait(1);
+ REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
+ }
}
/* Initialize the current link status. */
if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
{
- pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS;
- pDevice->DuplexMode = LM_DUPLEX_MODE_FULL;
- REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
- LED_CTRL_1000MBPS_LED_ON);
+ pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS;
+ pDevice->DuplexMode = LM_DUPLEX_MODE_FULL;
+ REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
+ LED_CTRL_1000MBPS_LED_ON);
}
else
{
- pDevice->LineSpeed = LM_LINE_SPEED_UNKNOWN;
- pDevice->DuplexMode = LM_DUPLEX_MODE_UNKNOWN;
- REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
- LED_CTRL_OVERRIDE_TRAFFIC_LED);
+ pDevice->LineSpeed = LM_LINE_SPEED_UNKNOWN;
+ pDevice->DuplexMode = LM_DUPLEX_MODE_UNKNOWN;
+ REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
+ LED_CTRL_OVERRIDE_TRAFFIC_LED);
}
/* Indicate link status. */
if (pDevice->LinkStatus != CurrentLinkStatus) {
- pDevice->LinkStatus = CurrentLinkStatus;
- MM_IndicateStatus(pDevice, CurrentLinkStatus);
+ pDevice->LinkStatus = CurrentLinkStatus;
+ MM_IndicateStatus(pDevice, CurrentLinkStatus);
}
return LM_STATUS_SUCCESS;
@@ -5005,7 +4987,7 @@
/* Clear link change attention. */
REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
+ MAC_STATUS_CFG_CHANGED);
/* Disable auto-polling for the moment. */
pDevice->MiMode = 0xc0000;
@@ -5015,147 +4997,147 @@
/* Determine the requested line speed and duplex. */
pDevice->OldLineSpeed = pDevice->LineSpeed;
LM_TranslateRequestedMediaType(pDevice->RequestedMediaType,
- &pDevice->MediaType, &pDevice->LineSpeed, &pDevice->DuplexMode);
+ &pDevice->MediaType, &pDevice->LineSpeed, &pDevice->DuplexMode);
/* Initialize the phy chip. */
switch(pDevice->PhyId & PHY_ID_MASK)
{
- case PHY_BCM5400_PHY_ID:
- case PHY_BCM5401_PHY_ID:
- case PHY_BCM5411_PHY_ID:
- case PHY_BCM5701_PHY_ID:
- case PHY_BCM5703_PHY_ID:
- case PHY_BCM5704_PHY_ID:
- CurrentLinkStatus = LM_InitBcm540xPhy(pDevice);
- break;
+ case PHY_BCM5400_PHY_ID:
+ case PHY_BCM5401_PHY_ID:
+ case PHY_BCM5411_PHY_ID:
+ case PHY_BCM5701_PHY_ID:
+ case PHY_BCM5703_PHY_ID:
+ case PHY_BCM5704_PHY_ID:
+ CurrentLinkStatus = LM_InitBcm540xPhy(pDevice);
+ break;
- default:
- break;
+ default:
+ break;
}
if(CurrentLinkStatus == LM_STATUS_LINK_SETTING_MISMATCH)
{
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
}
/* Setup flow control. */
pDevice->FlowControl = LM_FLOW_CONTROL_NONE;
if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
{
- LM_FLOW_CONTROL FlowCap; /* Flow control capability. */
+ LM_FLOW_CONTROL FlowCap; /* Flow control capability. */
- FlowCap = LM_FLOW_CONTROL_NONE;
+ FlowCap = LM_FLOW_CONTROL_NONE;
- if(pDevice->DuplexMode == LM_DUPLEX_MODE_FULL)
- {
- if(pDevice->DisableAutoNeg == FALSE ||
- pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO ||
- pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO)
- {
- LM_UINT32 ExpectedPhyAd;
- LM_UINT32 LocalPhyAd;
- LM_UINT32 RemotePhyAd;
+ if(pDevice->DuplexMode == LM_DUPLEX_MODE_FULL)
+ {
+ if(pDevice->DisableAutoNeg == FALSE ||
+ pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO ||
+ pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO)
+ {
+ LM_UINT32 ExpectedPhyAd;
+ LM_UINT32 LocalPhyAd;
+ LM_UINT32 RemotePhyAd;
- LM_ReadPhy(pDevice, PHY_AN_AD_REG, &LocalPhyAd);
+ LM_ReadPhy(pDevice, PHY_AN_AD_REG, &LocalPhyAd);
pDevice->advertising = LocalPhyAd;
- LocalPhyAd &= (PHY_AN_AD_ASYM_PAUSE | PHY_AN_AD_PAUSE_CAPABLE);
+ LocalPhyAd &= (PHY_AN_AD_ASYM_PAUSE | PHY_AN_AD_PAUSE_CAPABLE);
- ExpectedPhyAd = GetPhyAdFlowCntrlSettings(pDevice);
+ ExpectedPhyAd = GetPhyAdFlowCntrlSettings(pDevice);
- if(LocalPhyAd != ExpectedPhyAd)
- {
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
- }
- else
- {
- LM_ReadPhy(pDevice, PHY_LINK_PARTNER_ABILITY_REG,
- &RemotePhyAd);
+ if(LocalPhyAd != ExpectedPhyAd)
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_DOWN;
+ }
+ else
+ {
+ LM_ReadPhy(pDevice, PHY_LINK_PARTNER_ABILITY_REG,
+ &RemotePhyAd);
- LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd);
- }
- }
- else
- {
- pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE;
- LM_SetFlowControl(pDevice, 0, 0);
- }
- }
+ LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd);
+ }
+ }
+ else
+ {
+ pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE;
+ LM_SetFlowControl(pDevice, 0, 0);
+ }
+ }
}
if(CurrentLinkStatus == LM_STATUS_LINK_DOWN)
{
- LM_ForceAutoNeg(pDevice, pDevice->RequestedMediaType);
+ LM_ForceAutoNeg(pDevice, pDevice->RequestedMediaType);
- /* If we force line speed, we make get link right away. */
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- if(Value32 & PHY_STATUS_LINK_PASS)
- {
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
+ /* If we force line speed, we make get link right away. */
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ if(Value32 & PHY_STATUS_LINK_PASS)
+ {
+ CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
+ }
}
/* GMII interface. */
pDevice->MacMode &= ~MAC_MODE_PORT_MODE_MASK;
if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
{
- if(pDevice->LineSpeed == LM_LINE_SPEED_100MBPS ||
- pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)
- {
- pDevice->MacMode |= MAC_MODE_PORT_MODE_MII;
- }
- else
- {
- pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
- }
+ if(pDevice->LineSpeed == LM_LINE_SPEED_100MBPS ||
+ pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)
+ {
+ pDevice->MacMode |= MAC_MODE_PORT_MODE_MII;
+ }
+ else
+ {
+ pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
+ }
}
else {
- pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
+ pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
}
/* Set the MAC to operate in the appropriate duplex mode. */
pDevice->MacMode &= ~MAC_MODE_HALF_DUPLEX;
if(pDevice->DuplexMode == LM_DUPLEX_MODE_HALF)
{
- pDevice->MacMode |= MAC_MODE_HALF_DUPLEX;
+ pDevice->MacMode |= MAC_MODE_HALF_DUPLEX;
}
/* Set the link polarity bit. */
pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
{
- if((pDevice->LedMode == LED_MODE_LINK10) ||
- (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE &&
- pDevice->LineSpeed == LM_LINE_SPEED_10MBPS))
- {
- pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
- }
+ if((pDevice->LedMode == LED_MODE_LINK10) ||
+ (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE &&
+ pDevice->LineSpeed == LM_LINE_SPEED_10MBPS))
+ {
+ pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
+ }
}
else
{
- if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
- {
- pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
- }
+ if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
+ {
+ pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
+ }
- /* Set LED mode. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = LED_CTRL_PHY_MODE_1;
- }
- else
- {
- if(pDevice->LedMode == LED_MODE_OUTPUT)
- {
- Value32 = LED_CTRL_PHY_MODE_2;
- }
- else
- {
- Value32 = LED_CTRL_PHY_MODE_1;
- }
- }
- REG_WR(pDevice, MacCtrl.LedCtrl, Value32);
+ /* Set LED mode. */
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ }
+ else
+ {
+ if(pDevice->LedMode == LED_MODE_OUTPUT)
+ {
+ Value32 = LED_CTRL_PHY_MODE_2;
+ }
+ else
+ {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ }
+ }
+ REG_WR(pDevice, MacCtrl.LedCtrl, Value32);
}
REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
@@ -5163,38 +5145,38 @@
/* Enable auto polling. */
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
{
- pDevice->MiMode |= MI_MODE_AUTO_POLLING_ENABLE;
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
+ pDevice->MiMode |= MI_MODE_AUTO_POLLING_ENABLE;
+ REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
}
/* Enable phy link change attention. */
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT)
{
- REG_WR(pDevice, MacCtrl.MacEvent, MAC_EVENT_ENABLE_MI_INTERRUPT);
+ REG_WR(pDevice, MacCtrl.MacEvent, MAC_EVENT_ENABLE_MI_INTERRUPT);
}
else
{
- REG_WR(pDevice, MacCtrl.MacEvent,
- MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
+ REG_WR(pDevice, MacCtrl.MacEvent,
+ MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
}
if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) &&
- (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) &&
- (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
- (((pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) &&
- (pDevice->PciState & T3_PCI_STATE_BUS_SPEED_HIGH)) ||
- !(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)))
+ (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) &&
+ (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
+ (((pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) &&
+ (pDevice->PciState & T3_PCI_STATE_BUS_SPEED_HIGH)) ||
+ !(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)))
{
- MM_Wait(120);
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
- MEM_WR_OFFSET(pDevice, T3_FIRMWARE_MAILBOX,
- T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE);
+ MM_Wait(120);
+ REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED);
+ MEM_WR_OFFSET(pDevice, T3_FIRMWARE_MAILBOX,
+ T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE);
}
/* Indicate link status. */
if (pDevice->LinkStatus != CurrentLinkStatus) {
- pDevice->LinkStatus = CurrentLinkStatus;
- MM_IndicateStatus(pDevice, CurrentLinkStatus);
+ pDevice->LinkStatus = CurrentLinkStatus;
+ MM_IndicateStatus(pDevice, CurrentLinkStatus);
}
return LM_STATUS_SUCCESS;
@@ -5215,30 +5197,30 @@
#if INCLUDE_TBI_SUPPORT
if(pDevice->EnableTbi)
{
- LmStatus = LM_SetupFiberPhy(pDevice);
+ LmStatus = LM_SetupFiberPhy(pDevice);
}
else
#endif /* INCLUDE_TBI_SUPPORT */
{
- LmStatus = LM_SetupCopperPhy(pDevice);
+ LmStatus = LM_SetupCopperPhy(pDevice);
}
if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
{
- if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
- {
- Value32 = REG_RD(pDevice, PciCfg.PciState);
- REG_WR(pDevice, PciCfg.PciState,
- Value32 | T3_PCI_STATE_RETRY_SAME_DMA);
- }
+ if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
+ {
+ Value32 = REG_RD(pDevice, PciCfg.PciState);
+ REG_WR(pDevice, PciCfg.PciState,
+ Value32 | T3_PCI_STATE_RETRY_SAME_DMA);
+ }
}
if ((pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
- (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF))
+ (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF))
{
- REG_WR(pDevice, MacCtrl.TxLengths, 0x26ff);
+ REG_WR(pDevice, MacCtrl.TxLengths, 0x26ff);
}
else
{
- REG_WR(pDevice, MacCtrl.TxLengths, 0x2620);
+ REG_WR(pDevice, MacCtrl.TxLengths, 0x2620);
}
return LmStatus;
@@ -5259,48 +5241,47 @@
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
{
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode &
- ~MI_MODE_AUTO_POLLING_ENABLE);
- MM_Wait(40);
+ REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode &
+ ~MI_MODE_AUTO_POLLING_ENABLE);
+ MM_Wait(40);
}
Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) |
- ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) |
- MI_COM_CMD_READ | MI_COM_START;
+ ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) |
+ MI_COM_CMD_READ | MI_COM_START;
REG_WR(pDevice, MacCtrl.MiCom, Value32);
for(j = 0; j < 20; j++)
{
- MM_Wait(25);
+ MM_Wait(25);
- Value32 = REG_RD(pDevice, MacCtrl.MiCom);
+ Value32 = REG_RD(pDevice, MacCtrl.MiCom);
- if(!(Value32 & MI_COM_BUSY))
- {
- MM_Wait(5);
- Value32 = REG_RD(pDevice, MacCtrl.MiCom);
- Value32 &= MI_COM_PHY_DATA_MASK;
- break;
- }
+ if(!(Value32 & MI_COM_BUSY))
+ {
+ MM_Wait(5);
+ Value32 = REG_RD(pDevice, MacCtrl.MiCom);
+ Value32 &= MI_COM_PHY_DATA_MASK;
+ break;
+ }
}
if(Value32 & MI_COM_BUSY)
{
- Value32 = 0;
+ Value32 = 0;
}
*pData32 = Value32;
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
{
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
- MM_Wait(40);
+ REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
+ MM_Wait(40);
}
} /* LM_ReadPhy */
-
/******************************************************************************/
/* Description: */
/* */
@@ -5316,34 +5297,34 @@
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
{
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode &
- ~MI_MODE_AUTO_POLLING_ENABLE);
- MM_Wait(40);
+ REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode &
+ ~MI_MODE_AUTO_POLLING_ENABLE);
+ MM_Wait(40);
}
Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) |
- ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) |
- (Data32 & MI_COM_PHY_DATA_MASK) | MI_COM_CMD_WRITE | MI_COM_START;
+ ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) |
+ (Data32 & MI_COM_PHY_DATA_MASK) | MI_COM_CMD_WRITE | MI_COM_START;
REG_WR(pDevice, MacCtrl.MiCom, Value32);
for(j = 0; j < 20; j++)
{
- MM_Wait(25);
+ MM_Wait(25);
- Value32 = REG_RD(pDevice, MacCtrl.MiCom);
+ Value32 = REG_RD(pDevice, MacCtrl.MiCom);
- if(!(Value32 & MI_COM_BUSY))
- {
- MM_Wait(5);
- break;
- }
+ if(!(Value32 & MI_COM_BUSY))
+ {
+ MM_Wait(5);
+ break;
+ }
}
if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
{
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
- MM_Wait(40);
+ REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
+ MM_Wait(40);
}
} /* LM_WritePhy */
@@ -5375,33 +5356,33 @@
if(PowerLevel == LM_POWER_STATE_D0)
{
- /* Bring the card out of low power mode. */
- PmCtrl |= T3_PM_POWER_STATE_D0;
- MM_WriteConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl);
+ /* Bring the card out of low power mode. */
+ PmCtrl |= T3_PM_POWER_STATE_D0;
+ MM_WriteConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl);
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
- MM_Wait (40);
+ REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
+ MM_Wait (40);
#if 0 /* Bugfix by jmb...can't call WritePhy here because pDevice not fully initialized */
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x02);
+ LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x02);
#endif
- return LM_STATUS_SUCCESS;
+ return LM_STATUS_SUCCESS;
}
else if(PowerLevel == LM_POWER_STATE_D1)
{
- PmCtrl |= T3_PM_POWER_STATE_D1;
+ PmCtrl |= T3_PM_POWER_STATE_D1;
}
else if(PowerLevel == LM_POWER_STATE_D2)
{
- PmCtrl |= T3_PM_POWER_STATE_D2;
+ PmCtrl |= T3_PM_POWER_STATE_D2;
}
else if(PowerLevel == LM_POWER_STATE_D3)
{
- PmCtrl |= T3_PM_POWER_STATE_D3;
+ PmCtrl |= T3_PM_POWER_STATE_D3;
}
else
{
- return LM_STATUS_FAILURE;
+ return LM_STATUS_FAILURE;
}
PmCtrl |= T3_PM_PME_ENABLE;
@@ -5412,9 +5393,9 @@
if(!pDevice->RestoreOnWakeUp)
{
- pDevice->RestoreOnWakeUp = TRUE;
- pDevice->WakeUpDisableAutoNeg = pDevice->DisableAutoNeg;
- pDevice->WakeUpRequestedMediaType = pDevice->RequestedMediaType;
+ pDevice->RestoreOnWakeUp = TRUE;
+ pDevice->WakeUpDisableAutoNeg = pDevice->DisableAutoNeg;
+ pDevice->WakeUpRequestedMediaType = pDevice->RequestedMediaType;
}
/* Force auto-negotiation to 10 line speed. */
@@ -5431,168 +5412,168 @@
if (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE)
{
- /* Enable WOL. */
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x5a);
- MM_Wait(40);
+ /* Enable WOL. */
+ LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x5a);
+ MM_Wait(40);
- /* Set LED mode. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = LED_CTRL_PHY_MODE_1;
- }
- else
- {
- if(pDevice->LedMode == LED_MODE_OUTPUT)
- {
- Value32 = LED_CTRL_PHY_MODE_2;
- }
- else
- {
- Value32 = LED_CTRL_PHY_MODE_1;
- }
- }
+ /* Set LED mode. */
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ }
+ else
+ {
+ if(pDevice->LedMode == LED_MODE_OUTPUT)
+ {
+ Value32 = LED_CTRL_PHY_MODE_2;
+ }
+ else
+ {
+ Value32 = LED_CTRL_PHY_MODE_1;
+ }
+ }
- Value32 = MAC_MODE_PORT_MODE_MII;
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- if(pDevice->LedMode == LED_MODE_LINK10 ||
- pDevice->WolSpeed == WOL_SPEED_10MB)
- {
- Value32 |= MAC_MODE_LINK_POLARITY;
- }
- }
- else
- {
- Value32 |= MAC_MODE_LINK_POLARITY;
- }
- REG_WR(pDevice, MacCtrl.Mode, Value32);
- MM_Wait(40); MM_Wait(40); MM_Wait(40);
+ Value32 = MAC_MODE_PORT_MODE_MII;
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
+ {
+ if(pDevice->LedMode == LED_MODE_LINK10 ||
+ pDevice->WolSpeed == WOL_SPEED_10MB)
+ {
+ Value32 |= MAC_MODE_LINK_POLARITY;
+ }
+ }
+ else
+ {
+ Value32 |= MAC_MODE_LINK_POLARITY;
+ }
+ REG_WR(pDevice, MacCtrl.Mode, Value32);
+ MM_Wait(40); MM_Wait(40); MM_Wait(40);
- /* Always enable magic packet wake-up if we have vaux. */
- if((PmeSupport & T3_PCI_PM_CAP_PME_D3COLD) &&
- (pDevice->WakeUpModeCap & LM_WAKE_UP_MODE_MAGIC_PACKET))
- {
- Value32 |= MAC_MODE_DETECT_MAGIC_PACKET_ENABLE;
- }
+ /* Always enable magic packet wake-up if we have vaux. */
+ if((PmeSupport & T3_PCI_PM_CAP_PME_D3COLD) &&
+ (pDevice->WakeUpModeCap & LM_WAKE_UP_MODE_MAGIC_PACKET))
+ {
+ Value32 |= MAC_MODE_DETECT_MAGIC_PACKET_ENABLE;
+ }
- REG_WR(pDevice, MacCtrl.Mode, Value32);
+ REG_WR(pDevice, MacCtrl.Mode, Value32);
- /* Enable the receiver. */
- REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_ENABLE);
+ /* Enable the receiver. */
+ REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_ENABLE);
}
/* Disable tx/rx clocks, and seletect an alternate clock. */
if(pDevice->WolSpeed == WOL_SPEED_100MB)
{
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
- T3_PCI_SELECT_ALTERNATE_CLOCK;
- }
- else
- {
- Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK;
- }
- REG_WR(pDevice, PciCfg.ClockCtrl, Value32);
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
+ T3_PCI_SELECT_ALTERNATE_CLOCK;
+ }
+ else
+ {
+ Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK;
+ }
+ REG_WR(pDevice, PciCfg.ClockCtrl, Value32);
- MM_Wait(40);
+ MM_Wait(40);
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
- T3_PCI_SELECT_ALTERNATE_CLOCK | T3_PCI_44MHZ_CORE_CLOCK;
- }
- else
- {
- Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK |
- T3_PCI_44MHZ_CORE_CLOCK;
- }
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
+ T3_PCI_SELECT_ALTERNATE_CLOCK | T3_PCI_44MHZ_CORE_CLOCK;
+ }
+ else
+ {
+ Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK |
+ T3_PCI_44MHZ_CORE_CLOCK;
+ }
- REG_WR(pDevice, PciCfg.ClockCtrl, Value32);
+ REG_WR(pDevice, PciCfg.ClockCtrl, Value32);
- MM_Wait(40);
+ MM_Wait(40);
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
- T3_PCI_44MHZ_CORE_CLOCK;
- }
- else
- {
- Value32 = T3_PCI_44MHZ_CORE_CLOCK;
- }
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
+ T3_PCI_44MHZ_CORE_CLOCK;
+ }
+ else
+ {
+ Value32 = T3_PCI_44MHZ_CORE_CLOCK;
+ }
- REG_WR(pDevice, PciCfg.ClockCtrl, Value32);
+ REG_WR(pDevice, PciCfg.ClockCtrl, Value32);
}
else
{
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
- T3_PCI_SELECT_ALTERNATE_CLOCK |
- T3_PCI_POWER_DOWN_PCI_PLL133;
- }
- else
- {
- Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK |
- T3_PCI_POWER_DOWN_PCI_PLL133;
- }
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
+ T3_PCI_SELECT_ALTERNATE_CLOCK |
+ T3_PCI_POWER_DOWN_PCI_PLL133;
+ }
+ else
+ {
+ Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK |
+ T3_PCI_POWER_DOWN_PCI_PLL133;
+ }
- REG_WR(pDevice, PciCfg.ClockCtrl, Value32);
+ REG_WR(pDevice, PciCfg.ClockCtrl, Value32);
}
MM_Wait(40);
if(!pDevice->EepromWp && (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE))
{
- /* Switch adapter to auxilliary power. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
- MM_Wait(40);
- }
- else
- {
- /* GPIO0 = 0, GPIO1 = 1, GPIO2 = 1. */
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
- MM_Wait(40);
+ /* Switch adapter to auxilliary power. */
+ if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
+ T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
+ {
+ /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
+ REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
+ MM_Wait(40);
+ }
+ else
+ {
+ /* GPIO0 = 0, GPIO1 = 1, GPIO2 = 1. */
+ REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
+ MM_Wait(40);
- /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 1. */
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
- MM_Wait(40);
+ /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 1. */
+ REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
+ MM_Wait(40);
- /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
- MM_Wait(40);
- }
+ /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
+ REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
+ GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
+ MM_Wait(40);
+ }
}
/* Set the phy to low power mode. */
@@ -5603,7 +5584,6 @@
} /* LM_SetPowerState */
-
/******************************************************************************/
/* Description: */
/* */
@@ -5619,31 +5599,30 @@
/* Auto negotiation flow control only when autonegotiation is enabled. */
if(pDevice->DisableAutoNeg == FALSE ||
- pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO ||
- pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO)
+ pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO ||
+ pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO)
{
- /* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */
- if((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) ||
- ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) &&
- (pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)))
- {
- Value32 |= PHY_AN_AD_PAUSE_CAPABLE;
- }
- else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)
- {
- Value32 |= PHY_AN_AD_ASYM_PAUSE;
- }
- else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)
- {
- Value32 |= PHY_AN_AD_PAUSE_CAPABLE | PHY_AN_AD_ASYM_PAUSE;
- }
+ /* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */
+ if((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) ||
+ ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) &&
+ (pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)))
+ {
+ Value32 |= PHY_AN_AD_PAUSE_CAPABLE;
+ }
+ else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)
+ {
+ Value32 |= PHY_AN_AD_ASYM_PAUSE;
+ }
+ else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)
+ {
+ Value32 |= PHY_AN_AD_PAUSE_CAPABLE | PHY_AN_AD_ASYM_PAUSE;
+ }
}
return Value32;
}
-
/******************************************************************************/
/* Description: */
/* */
@@ -5666,184 +5645,183 @@
/* Get the interface type, line speed, and duplex mode. */
LM_TranslateRequestedMediaType(RequestedMediaType, &MediaType, &LineSpeed,
- &DuplexMode);
+ &DuplexMode);
if (pDevice->RestoreOnWakeUp)
{
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
- pDevice->advertising1000 = 0;
- Value32 = PHY_AN_AD_10BASET_FULL | PHY_AN_AD_10BASET_HALF;
- if (pDevice->WolSpeed == WOL_SPEED_100MB)
- {
- Value32 |= PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
- }
- Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
+ LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
+ pDevice->advertising1000 = 0;
+ Value32 = PHY_AN_AD_10BASET_FULL | PHY_AN_AD_10BASET_HALF;
+ if (pDevice->WolSpeed == WOL_SPEED_100MB)
+ {
+ Value32 |= PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
+ }
+ Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
+ Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
+ LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
}
/* Setup the auto-negotiation advertisement register. */
else if(LineSpeed == LM_LINE_SPEED_UNKNOWN)
{
- /* Setup the 10/100 Mbps auto-negotiation advertisement register. */
- Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
- PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL |
- PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
+ /* Setup the 10/100 Mbps auto-negotiation advertisement register. */
+ Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
+ PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL |
+ PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
+ Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
+ LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
- /* Advertise 1000Mbps */
- Value32 = BCM540X_AN_AD_1000BASET_HALF | BCM540X_AN_AD_1000BASET_FULL;
+ /* Advertise 1000Mbps */
+ Value32 = BCM540X_AN_AD_1000BASET_HALF | BCM540X_AN_AD_1000BASET_FULL;
#if INCLUDE_5701_AX_FIX
- /* Bug: workaround for CRC error in gigabit mode when we are in */
- /* slave mode. This will force the PHY to operate in */
- /* master mode. */
- if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
- {
- Value32 |= BCM540X_CONFIG_AS_MASTER |
- BCM540X_ENABLE_CONFIG_AS_MASTER;
- }
+ /* Bug: workaround for CRC error in gigabit mode when we are in */
+ /* slave mode. This will force the PHY to operate in */
+ /* master mode. */
+ if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
+ pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
+ {
+ Value32 |= BCM540X_CONFIG_AS_MASTER |
+ BCM540X_ENABLE_CONFIG_AS_MASTER;
+ }
#endif
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
- pDevice->advertising1000 = Value32;
+ LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
+ pDevice->advertising1000 = Value32;
}
else
{
- if(LineSpeed == LM_LINE_SPEED_1000MBPS)
- {
- Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
+ if(LineSpeed == LM_LINE_SPEED_1000MBPS)
+ {
+ Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
+ Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
+ LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
- if(DuplexMode != LM_DUPLEX_MODE_FULL)
- {
- Value32 = BCM540X_AN_AD_1000BASET_HALF;
- }
- else
- {
- Value32 = BCM540X_AN_AD_1000BASET_FULL;
- }
+ if(DuplexMode != LM_DUPLEX_MODE_FULL)
+ {
+ Value32 = BCM540X_AN_AD_1000BASET_HALF;
+ }
+ else
+ {
+ Value32 = BCM540X_AN_AD_1000BASET_FULL;
+ }
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
- pDevice->advertising1000 = Value32;
- }
- else if(LineSpeed == LM_LINE_SPEED_100MBPS)
- {
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
- pDevice->advertising1000 = 0;
+ LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
+ pDevice->advertising1000 = Value32;
+ }
+ else if(LineSpeed == LM_LINE_SPEED_100MBPS)
+ {
+ LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
+ pDevice->advertising1000 = 0;
- if(DuplexMode != LM_DUPLEX_MODE_FULL)
- {
- Value32 = PHY_AN_AD_100BASETX_HALF;
- }
- else
- {
- Value32 = PHY_AN_AD_100BASETX_FULL;
- }
+ if(DuplexMode != LM_DUPLEX_MODE_FULL)
+ {
+ Value32 = PHY_AN_AD_100BASETX_HALF;
+ }
+ else
+ {
+ Value32 = PHY_AN_AD_100BASETX_FULL;
+ }
- Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
+ Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
+ Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
- }
- else if(LineSpeed == LM_LINE_SPEED_10MBPS)
- {
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
- pDevice->advertising1000 = 0;
+ LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
+ }
+ else if(LineSpeed == LM_LINE_SPEED_10MBPS)
+ {
+ LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
+ pDevice->advertising1000 = 0;
- if(DuplexMode != LM_DUPLEX_MODE_FULL)
- {
- Value32 = PHY_AN_AD_10BASET_HALF;
- }
- else
- {
- Value32 = PHY_AN_AD_10BASET_FULL;
- }
+ if(DuplexMode != LM_DUPLEX_MODE_FULL)
+ {
+ Value32 = PHY_AN_AD_10BASET_HALF;
+ }
+ else
+ {
+ Value32 = PHY_AN_AD_10BASET_FULL;
+ }
- Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
+ Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
+ Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
- }
+ LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
+ pDevice->advertising = Value32;
+ }
}
/* Force line speed if auto-negotiation is disabled. */
if(pDevice->DisableAutoNeg && LineSpeed != LM_LINE_SPEED_UNKNOWN)
{
- /* This code path is executed only when there is link. */
- pDevice->MediaType = MediaType;
- pDevice->LineSpeed = LineSpeed;
- pDevice->DuplexMode = DuplexMode;
+ /* This code path is executed only when there is link. */
+ pDevice->MediaType = MediaType;
+ pDevice->LineSpeed = LineSpeed;
+ pDevice->DuplexMode = DuplexMode;
- /* Force line seepd. */
- NewPhyCtrl = 0;
- switch(LineSpeed)
- {
- case LM_LINE_SPEED_10MBPS:
- NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_10MBPS;
- break;
- case LM_LINE_SPEED_100MBPS:
- NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_100MBPS;
- break;
- case LM_LINE_SPEED_1000MBPS:
- NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
- break;
- default:
- NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
- break;
- }
+ /* Force line seepd. */
+ NewPhyCtrl = 0;
+ switch(LineSpeed)
+ {
+ case LM_LINE_SPEED_10MBPS:
+ NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_10MBPS;
+ break;
+ case LM_LINE_SPEED_100MBPS:
+ NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_100MBPS;
+ break;
+ case LM_LINE_SPEED_1000MBPS:
+ NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
+ break;
+ default:
+ NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
+ break;
+ }
- if(DuplexMode == LM_DUPLEX_MODE_FULL)
- {
- NewPhyCtrl |= PHY_CTRL_FULL_DUPLEX_MODE;
- }
+ if(DuplexMode == LM_DUPLEX_MODE_FULL)
+ {
+ NewPhyCtrl |= PHY_CTRL_FULL_DUPLEX_MODE;
+ }
- /* Don't do anything if the PHY_CTRL is already what we wanted. */
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if(Value32 != NewPhyCtrl)
- {
- /* Temporary bring the link down before forcing line speed. */
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_LOOPBACK_MODE);
+ /* Don't do anything if the PHY_CTRL is already what we wanted. */
+ LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
+ if(Value32 != NewPhyCtrl)
+ {
+ /* Temporary bring the link down before forcing line speed. */
+ LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_LOOPBACK_MODE);
- /* Wait for link to go down. */
- for(Cnt = 0; Cnt < 15000; Cnt++)
- {
- MM_Wait(10);
+ /* Wait for link to go down. */
+ for(Cnt = 0; Cnt < 15000; Cnt++)
+ {
+ MM_Wait(10);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
+ LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- if(!(Value32 & PHY_STATUS_LINK_PASS))
- {
- MM_Wait(40);
- break;
- }
- }
+ if(!(Value32 & PHY_STATUS_LINK_PASS))
+ {
+ MM_Wait(40);
+ break;
+ }
+ }
- LM_WritePhy(pDevice, PHY_CTRL_REG, NewPhyCtrl);
- MM_Wait(40);
- }
+ LM_WritePhy(pDevice, PHY_CTRL_REG, NewPhyCtrl);
+ MM_Wait(40);
+ }
}
else
{
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE |
- PHY_CTRL_RESTART_AUTO_NEG);
+ LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE |
+ PHY_CTRL_RESTART_AUTO_NEG);
}
return LM_STATUS_SUCCESS;
} /* LM_ForceAutoNegBcm540xPhy */
-
/******************************************************************************/
/* Description: */
/* */
@@ -5859,18 +5837,18 @@
/* Initialize the phy chip. */
switch(pDevice->PhyId & PHY_ID_MASK)
{
- case PHY_BCM5400_PHY_ID:
- case PHY_BCM5401_PHY_ID:
- case PHY_BCM5411_PHY_ID:
- case PHY_BCM5701_PHY_ID:
- case PHY_BCM5703_PHY_ID:
- case PHY_BCM5704_PHY_ID:
- LmStatus = LM_ForceAutoNegBcm540xPhy(pDevice, RequestedMediaType);
- break;
+ case PHY_BCM5400_PHY_ID:
+ case PHY_BCM5401_PHY_ID:
+ case PHY_BCM5411_PHY_ID:
+ case PHY_BCM5701_PHY_ID:
+ case PHY_BCM5703_PHY_ID:
+ case PHY_BCM5704_PHY_ID:
+ LmStatus = LM_ForceAutoNegBcm540xPhy(pDevice, RequestedMediaType);
+ break;
- default:
- LmStatus = LM_STATUS_FAILURE;
- break;
+ default:
+ LmStatus = LM_STATUS_FAILURE;
+ break;
}
return LmStatus;
@@ -5882,123 +5860,123 @@
/* Return: */
/******************************************************************************/
LM_STATUS LM_LoadFirmware(PLM_DEVICE_BLOCK pDevice,
- PT3_FWIMG_INFO pFwImg,
- LM_UINT32 LoadCpu,
- LM_UINT32 StartCpu)
+ PT3_FWIMG_INFO pFwImg,
+ LM_UINT32 LoadCpu,
+ LM_UINT32 StartCpu)
{
LM_UINT32 i;
LM_UINT32 address;
if (LoadCpu & T3_RX_CPU_ID)
{
- if (LM_HaltCpu(pDevice,T3_RX_CPU_ID) != LM_STATUS_SUCCESS)
- {
- return LM_STATUS_FAILURE;
- }
+ if (LM_HaltCpu(pDevice,T3_RX_CPU_ID) != LM_STATUS_SUCCESS)
+ {
+ return LM_STATUS_FAILURE;
+ }
- /* First of all clear scrach pad memory */
- for (i = 0; i < T3_RX_CPU_SPAD_SIZE; i+=4)
- {
- LM_RegWrInd(pDevice,T3_RX_CPU_SPAD_ADDR+i,0);
- }
+ /* First of all clear scrach pad memory */
+ for (i = 0; i < T3_RX_CPU_SPAD_SIZE; i+=4)
+ {
+ LM_RegWrInd(pDevice,T3_RX_CPU_SPAD_ADDR+i,0);
+ }
- /* Copy code first */
- address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
- for (i = 0; i <= pFwImg->Text.Length; i+=4)
- {
- LM_RegWrInd(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]);
- }
+ /* Copy code first */
+ address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
+ for (i = 0; i <= pFwImg->Text.Length; i+=4)
+ {
+ LM_RegWrInd(pDevice,address+i,
+ ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]);
+ }
- address = T3_RX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
- for (i = 0; i <= pFwImg->ROnlyData.Length; i+=4)
- {
- LM_RegWrInd(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]);
- }
+ address = T3_RX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
+ for (i = 0; i <= pFwImg->ROnlyData.Length; i+=4)
+ {
+ LM_RegWrInd(pDevice,address+i,
+ ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]);
+ }
- address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
- for (i= 0; i <= pFwImg->Data.Length; i+=4)
- {
- LM_RegWrInd(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]);
- }
+ address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
+ for (i= 0; i <= pFwImg->Data.Length; i+=4)
+ {
+ LM_RegWrInd(pDevice,address+i,
+ ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]);
+ }
}
if (LoadCpu & T3_TX_CPU_ID)
{
- if (LM_HaltCpu(pDevice,T3_TX_CPU_ID) != LM_STATUS_SUCCESS)
- {
- return LM_STATUS_FAILURE;
- }
+ if (LM_HaltCpu(pDevice,T3_TX_CPU_ID) != LM_STATUS_SUCCESS)
+ {
+ return LM_STATUS_FAILURE;
+ }
- /* First of all clear scrach pad memory */
- for (i = 0; i < T3_TX_CPU_SPAD_SIZE; i+=4)
- {
- LM_RegWrInd(pDevice,T3_TX_CPU_SPAD_ADDR+i,0);
- }
+ /* First of all clear scrach pad memory */
+ for (i = 0; i < T3_TX_CPU_SPAD_SIZE; i+=4)
+ {
+ LM_RegWrInd(pDevice,T3_TX_CPU_SPAD_ADDR+i,0);
+ }
- /* Copy code first */
- address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
- for (i= 0; i <= pFwImg->Text.Length; i+=4)
- {
- LM_RegWrInd(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]);
- }
+ /* Copy code first */
+ address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
+ for (i= 0; i <= pFwImg->Text.Length; i+=4)
+ {
+ LM_RegWrInd(pDevice,address+i,
+ ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]);
+ }
- address = T3_TX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
- for (i= 0; i <= pFwImg->ROnlyData.Length; i+=4)
- {
- LM_RegWrInd(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]);
- }
+ address = T3_TX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
+ for (i= 0; i <= pFwImg->ROnlyData.Length; i+=4)
+ {
+ LM_RegWrInd(pDevice,address+i,
+ ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]);
+ }
- address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
- for (i= 0; i <= pFwImg->Data.Length; i+=4)
- {
- LM_RegWrInd(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]);
- }
+ address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
+ for (i= 0; i <= pFwImg->Data.Length; i+=4)
+ {
+ LM_RegWrInd(pDevice,address+i,
+ ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]);
+ }
}
if (StartCpu & T3_RX_CPU_ID)
{
- /* Start Rx CPU */
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress);
- for (i = 0 ; i < 5; i++)
- {
- if (pFwImg->StartAddress == REG_RD(pDevice,rxCpu.reg.PC))
- break;
+ /* Start Rx CPU */
+ REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress);
+ for (i = 0 ; i < 5; i++)
+ {
+ if (pFwImg->StartAddress == REG_RD(pDevice,rxCpu.reg.PC))
+ break;
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
- REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress);
- MM_Wait(1000);
- }
+ REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
+ REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress);
+ MM_Wait(1000);
+ }
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.mode, 0);
+ REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,rxCpu.reg.mode, 0);
}
if (StartCpu & T3_TX_CPU_ID)
{
- /* Start Tx CPU */
- REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress);
- for (i = 0 ; i < 5; i++)
- {
- if (pFwImg->StartAddress == REG_RD(pDevice,txCpu.reg.PC))
- break;
+ /* Start Tx CPU */
+ REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress);
+ for (i = 0 ; i < 5; i++)
+ {
+ if (pFwImg->StartAddress == REG_RD(pDevice,txCpu.reg.PC))
+ break;
- REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT);
- REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress);
- MM_Wait(1000);
- }
+ REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT);
+ REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress);
+ MM_Wait(1000);
+ }
- REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,txCpu.reg.mode, 0);
+ REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,txCpu.reg.mode, 0);
}
return LM_STATUS_SUCCESS;
@@ -6010,29 +5988,29 @@
if (cpu_number == T3_RX_CPU_ID)
{
- for (i = 0 ; i < 10000; i++)
- {
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
+ for (i = 0 ; i < 10000; i++)
+ {
+ REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
- if (REG_RD(pDevice,rxCpu.reg.mode) & CPU_MODE_HALT)
- break;
- }
+ if (REG_RD(pDevice,rxCpu.reg.mode) & CPU_MODE_HALT)
+ break;
+ }
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
- MM_Wait(10);
+ REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
+ MM_Wait(10);
}
else
{
- for (i = 0 ; i < 10000; i++)
- {
- REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT);
+ for (i = 0 ; i < 10000; i++)
+ {
+ REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
+ REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT);
- if (REG_RD(pDevice,txCpu.reg.mode) & CPU_MODE_HALT)
- break;
- }
+ if (REG_RD(pDevice,txCpu.reg.mode) & CPU_MODE_HALT)
+ break;
+ }
}
return (( i == 10000) ? LM_STATUS_FAILURE : LM_STATUS_SUCCESS);
@@ -6049,10 +6027,10 @@
if(BlinkDurationSec == 0)
{
return 0;
- }
+ }
if(BlinkDurationSec > 120)
- {
- BlinkDurationSec = 120;
+ {
+ BlinkDurationSec = 120;
}
Oldcfg = REG_RD(pDevice, MacCtrl.LedCtrl);
@@ -6060,7 +6038,7 @@
{
if(j % 2)
{
- /* Turn on the LEDs. */
+ /* Turn on the LEDs. */
REG_WR(pDevice, MacCtrl.LedCtrl,
LED_CTRL_OVERRIDE_LINK_LED |
LED_CTRL_1000MBPS_LED_ON |
@@ -6072,20 +6050,20 @@
}
else
{
- /* Turn off the LEDs. */
+ /* Turn off the LEDs. */
REG_WR(pDevice, MacCtrl.LedCtrl,
LED_CTRL_OVERRIDE_LINK_LED |
LED_CTRL_OVERRIDE_TRAFFIC_LED);
}
#ifndef EMBEDDED
- current->state = TASK_INTERRUPTIBLE;
- if (schedule_timeout(HZ/2) != 0) {
- ret = -EINTR;
- break;
- }
+ current->state = TASK_INTERRUPTIBLE;
+ if (schedule_timeout(HZ/2) != 0) {
+ ret = -EINTR;
+ break;
+ }
#else
- udelay(100000); /* 1s sleep */
+ udelay(100000); /* 1s sleep */
#endif
}
REG_WR(pDevice, MacCtrl.LedCtrl, Oldcfg);
@@ -6093,8 +6071,8 @@
}
int t3_do_dma(PLM_DEVICE_BLOCK pDevice,
- LM_PHYSICAL_ADDRESS host_addr_phy, int length,
- int dma_read)
+ LM_PHYSICAL_ADDRESS host_addr_phy, int length,
+ int dma_read)
{
T3_DMA_DESC dma_desc;
int i;
@@ -6112,15 +6090,15 @@
if (dma_read)
{
- dma_desc.cqid_sqid = (T3_QID_RX_BD_COMP << 8) |
- T3_QID_DMA_HIGH_PRI_READ;
- REG_WR(pDevice, DmaRead.Mode, DMA_READ_MODE_ENABLE);
+ dma_desc.cqid_sqid = (T3_QID_RX_BD_COMP << 8) |
+ T3_QID_DMA_HIGH_PRI_READ;
+ REG_WR(pDevice, DmaRead.Mode, DMA_READ_MODE_ENABLE);
}
else
{
- dma_desc.cqid_sqid = (T3_QID_RX_DATA_COMP << 8) |
- T3_QID_DMA_HIGH_PRI_WRITE;
- REG_WR(pDevice, DmaWrite.Mode, DMA_WRITE_MODE_ENABLE);
+ dma_desc.cqid_sqid = (T3_QID_RX_DATA_COMP << 8) |
+ T3_QID_DMA_HIGH_PRI_WRITE;
+ REG_WR(pDevice, DmaWrite.Mode, DMA_WRITE_MODE_ENABLE);
}
dma_desc_addr = T3_NIC_DMA_DESC_POOL_ADDR;
@@ -6128,28 +6106,28 @@
/* Writing this DMA descriptor to DMA memory */
for (i = 0; i < sizeof(T3_DMA_DESC); i += 4)
{
- value32 = *((PLM_UINT32) (((PLM_UINT8) &dma_desc) + i));
- MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, dma_desc_addr+i);
- MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_DATA_REG, cpu_to_le32(value32));
+ value32 = *((PLM_UINT32) (((PLM_UINT8) &dma_desc) + i));
+ MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, dma_desc_addr+i);
+ MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_DATA_REG, cpu_to_le32(value32));
}
MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, 0);
if (dma_read)
- REG_WR(pDevice, Ftq.DmaHighReadFtqFifoEnqueueDequeue, dma_desc_addr);
+ REG_WR(pDevice, Ftq.DmaHighReadFtqFifoEnqueueDequeue, dma_desc_addr);
else
- REG_WR(pDevice, Ftq.DmaHighWriteFtqFifoEnqueueDequeue, dma_desc_addr);
+ REG_WR(pDevice, Ftq.DmaHighWriteFtqFifoEnqueueDequeue, dma_desc_addr);
for (i = 0; i < 40; i++)
{
- if (dma_read)
- value32 = REG_RD(pDevice, Ftq.RcvBdCompFtqFifoEnqueueDequeue);
- else
- value32 = REG_RD(pDevice, Ftq.RcvDataCompFtqFifoEnqueueDequeue);
+ if (dma_read)
+ value32 = REG_RD(pDevice, Ftq.RcvBdCompFtqFifoEnqueueDequeue);
+ else
+ value32 = REG_RD(pDevice, Ftq.RcvDataCompFtqFifoEnqueueDequeue);
- if ((value32 & 0xffff) == dma_desc_addr)
- break;
+ if ((value32 & 0xffff) == dma_desc_addr)
+ break;
- MM_Wait(10);
+ MM_Wait(10);
}
return LM_STATUS_SUCCESS;
@@ -6157,65 +6135,65 @@
STATIC LM_STATUS
LM_DmaTest(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
- LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize)
+ LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize)
{
int j;
LM_UINT32 *ptr;
int dma_success = 0;
if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
- T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701)
+ T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701)
{
- return LM_STATUS_SUCCESS;
+ return LM_STATUS_SUCCESS;
}
while (!dma_success)
{
- /* Fill data with incremental patterns */
- ptr = (LM_UINT32 *)pBufferVirt;
- for (j = 0; j < BufferSize/4; j++)
- *ptr++ = j;
+ /* Fill data with incremental patterns */
+ ptr = (LM_UINT32 *)pBufferVirt;
+ for (j = 0; j < BufferSize/4; j++)
+ *ptr++ = j;
- if (t3_do_dma(pDevice,BufferPhy,BufferSize, 1) == LM_STATUS_FAILURE)
- {
- return LM_STATUS_FAILURE;
- }
+ if (t3_do_dma(pDevice,BufferPhy,BufferSize, 1) == LM_STATUS_FAILURE)
+ {
+ return LM_STATUS_FAILURE;
+ }
- MM_Wait(40);
- ptr = (LM_UINT32 *)pBufferVirt;
- /* Fill data with zero */
- for (j = 0; j < BufferSize/4; j++)
- *ptr++ = 0;
+ MM_Wait(40);
+ ptr = (LM_UINT32 *)pBufferVirt;
+ /* Fill data with zero */
+ for (j = 0; j < BufferSize/4; j++)
+ *ptr++ = 0;
- if (t3_do_dma(pDevice,BufferPhy,BufferSize, 0) == LM_STATUS_FAILURE)
- {
- return LM_STATUS_FAILURE;
- }
+ if (t3_do_dma(pDevice,BufferPhy,BufferSize, 0) == LM_STATUS_FAILURE)
+ {
+ return LM_STATUS_FAILURE;
+ }
- MM_Wait(40);
- /* Check for data */
- ptr = (LM_UINT32 *)pBufferVirt;
- for (j = 0; j < BufferSize/4; j++)
- {
- if (*ptr++ != j)
- {
- if ((pDevice->DmaReadWriteCtrl & DMA_CTRL_WRITE_BOUNDARY_MASK)
- == DMA_CTRL_WRITE_BOUNDARY_DISABLE)
- {
- pDevice->DmaReadWriteCtrl = (pDevice->DmaReadWriteCtrl &
- ~DMA_CTRL_WRITE_BOUNDARY_MASK) |
- DMA_CTRL_WRITE_BOUNDARY_16;
- REG_WR(pDevice, PciCfg.DmaReadWriteCtrl,
- pDevice->DmaReadWriteCtrl);
- break;
- }
- else
- {
- return LM_STATUS_FAILURE;
- }
- }
- }
- if (j == (BufferSize/4))
- dma_success = 1;
+ MM_Wait(40);
+ /* Check for data */
+ ptr = (LM_UINT32 *)pBufferVirt;
+ for (j = 0; j < BufferSize/4; j++)
+ {
+ if (*ptr++ != j)
+ {
+ if ((pDevice->DmaReadWriteCtrl & DMA_CTRL_WRITE_BOUNDARY_MASK)
+ == DMA_CTRL_WRITE_BOUNDARY_DISABLE)
+ {
+ pDevice->DmaReadWriteCtrl = (pDevice->DmaReadWriteCtrl &
+ ~DMA_CTRL_WRITE_BOUNDARY_MASK) |
+ DMA_CTRL_WRITE_BOUNDARY_16;
+ REG_WR(pDevice, PciCfg.DmaReadWriteCtrl,
+ pDevice->DmaReadWriteCtrl);
+ break;
+ }
+ else
+ {
+ return LM_STATUS_FAILURE;
+ }
+ }
+ }
+ if (j == (BufferSize/4))
+ dma_success = 1;
}
return LM_STATUS_SUCCESS;
}