* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index fe5841e..203e803 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -83,7 +83,6 @@
#include <common.h>
#include <command.h>
-#include <cmd_i2c.h>
#include <i2c.h>
#include <asm/byteorder.h>
@@ -865,4 +864,61 @@
}
#endif /* CFG_CMD_SDRAM */
+
+/***************************************************/
+
+cmd_tbl_t U_BOOT_CMD(IMD) = MK_CMD_ENTRY(
+ "imd", 4, 1, do_i2c_md, \
+ "imd - i2c memory display\n", \
+ "chip address[.0, .1, .2] [# of objects]\n - i2c memory display\n" \
+);
+
+cmd_tbl_t U_BOOT_CMD(IMM) = MK_CMD_ENTRY(
+ "imm", 3, 1, do_i2c_mm,
+ "imm - i2c memory modify (auto-incrementing)\n",
+ "chip address[.0, .1, .2]\n"
+ " - memory modify, auto increment address\n"
+);
+cmd_tbl_t U_BOOT_CMD(INM) = MK_CMD_ENTRY(
+ "inm", 3, 1, do_i2c_nm,
+ "inm - memory modify (constant address)\n",
+ "chip address[.0, .1, .2]\n - memory modify, read and keep address\n"
+);
+
+cmd_tbl_t U_BOOT_CMD(IMW) = MK_CMD_ENTRY(
+ "imw", 5, 1, do_i2c_mw,
+ "imw - memory write (fill)\n",
+ "chip address[.0, .1, .2] value [count]\n - memory write (fill)\n"
+);
+
+cmd_tbl_t U_BOOT_CMD(ICRC) = MK_CMD_ENTRY(
+ "icrc32", 5, 1, do_i2c_crc,
+ "icrc32 - checksum calculation\n",
+ "chip address[.0, .1, .2] count\n - compute CRC32 checksum\n"
+);
+
+cmd_tbl_t U_BOOT_CMD(IPROBE) = MK_CMD_ENTRY(
+ "iprobe", 1, 1, do_i2c_probe,
+ "iprobe - probe to discover valid I2C chip addresses\n",
+ "\n -discover valid I2C chip addresses\n"
+);
+
+/*
+ * Require full name for "iloop" because it is an infinite loop!
+ */
+cmd_tbl_t U_BOOT_CMD(ILOOP) = MK_CMD_ENTRY(
+ "iloop", 5, 1, do_i2c_loop,
+ "iloop - infinite loop on address range\n",
+ "chip address[.0, .1, .2] [# of objects]\n"
+ " - loop, reading a set of addresses\n"
+);
+
+#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+cmd_tbl_t U_BOOT_CMD(ISDRAM) = MK_CMD_ENTRY(
+ "isdram", 2, 1, do_sdram,
+ "isdram - print SDRAM configuration information\n",
+ "chip\n - print SDRAM configuration information\n"
+ " (valid chip values 50..57)\n"
+);
+#endif
#endif /* CFG_CMD_I2C */