* Code cleanup:
  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c
index 3ee342f..3030750 100644
--- a/common/cmd_fdc.c
+++ b/common/cmd_fdc.c
@@ -47,9 +47,9 @@
 #endif
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_DATE)
-#include <rtc.h>
-#endif
+/*#if (CONFIG_COMMANDS & CFG_CMD_DATE) */
+/*#include <rtc.h> */
+/*#endif */
 
 #if ((CONFIG_COMMANDS & CFG_CMD_FDC) || (CONFIG_COMMANDS & CFG_CMD_FDOS))
 
@@ -211,7 +211,7 @@
 	return TRUE;
 }
 #endif
-   
+
 /* Supporting Functions */
 /* reads a Register of the FDC */
 unsigned char read_fdc_reg(unsigned int addr)
@@ -220,14 +220,14 @@
 		(volatile unsigned char *)(CFG_ISA_IO_BASE_ADDRESS +
 					   (addr * CFG_ISA_IO_STRIDE) +
 					   CFG_ISA_IO_OFFSET);
-        
+
 	return val [0];
 }
 
 /* writes a Register of the FDC */
 void write_fdc_reg(unsigned int addr, unsigned char val)
 {
-        volatile unsigned char *tmp =
+	volatile unsigned char *tmp =
 		(volatile unsigned char *)(CFG_ISA_IO_BASE_ADDRESS +
 					   (addr * CFG_ISA_IO_STRIDE) +
 					   CFG_ISA_IO_OFFSET);
@@ -642,7 +642,6 @@
 }
 
 
-
 /**************************************************************************
 * int fdc_setup
 * setup the fdc according the datasheet
@@ -658,7 +657,7 @@
 #endif
 
 #ifdef CFG_FDC_HW_INIT
-        fdc_hw_init ();
+	fdc_hw_init ();
 #endif
 	/* first, we reset the FDC via the DOR */
 	write_fdc_reg(FDC_DOR,0x00);
@@ -716,14 +715,14 @@
 
 /**************************************************************************
 * int fdc_fdos_init
-* initialize the FDC layer 
-* 
+* initialize the FDC layer
+*
 */
 int fdc_fdos_init (int drive)
 {
 	FD_GEO_STRUCT *pFG = (FD_GEO_STRUCT *)floppy_type;
 	FDC_COMMAND_STRUCT *pCMD = &cmd;
-    
+
 	/* setup FDC and scan for drives  */
 	if(fdc_setup(drive,pCMD,pFG)==FALSE) {
 		printf("\n** Error in setup FDC **\n");
@@ -748,19 +747,19 @@
 
 	/* read first block */
 	pCMD->blnr=0;
-        return TRUE;
+	return TRUE;
 }
 /**************************************************************************
 * int fdc_fdos_seek
-* parameter is a block number 
+* parameter is a block number
 */
 int fdc_fdos_seek (int where)
 {
 	FD_GEO_STRUCT *pFG = (FD_GEO_STRUCT *)floppy_type;
 	FDC_COMMAND_STRUCT *pCMD = &cmd;
 
-        pCMD -> blnr = where ;
-        return (fdc_seek (pCMD, pFG));
+	pCMD -> blnr = where ;
+	return (fdc_seek (pCMD, pFG));
 }
 /**************************************************************************
 * int fdc_fdos_read
@@ -771,7 +770,7 @@
 	FD_GEO_STRUCT *pFG = (FD_GEO_STRUCT *)floppy_type;
 	FDC_COMMAND_STRUCT *pCMD = &cmd;
 
-        return (fdc_read_data (buffer, len, pCMD, pFG));
+	return (fdc_read_data (buffer, len, pCMD, pFG));
 }
 #endif  /* (CONFIG_COMMANDS & CFG_CMD_FDOS)                                  */
 
@@ -783,7 +782,7 @@
 {
 	FD_GEO_STRUCT *pFG = (FD_GEO_STRUCT *)floppy_type;
 	FDC_COMMAND_STRUCT *pCMD = &cmd;
- 	unsigned long addr,imsize;
+	unsigned long addr,imsize;
 	image_header_t *hdr;  /* used for fdc boot */
 	unsigned char boot_drive;
 	int i,nrofblk;
@@ -793,7 +792,7 @@
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
-		boot_drive=CFG_FDC_DRIVE_NUMBER; 
+		boot_drive=CFG_FDC_DRIVE_NUMBER;
 		break;
 	case 2:
 		addr = simple_strtoul(argv[1], NULL, 16);
@@ -881,7 +880,17 @@
 }
 
 
-
 #endif /* CONFIG_COMMANDS & CFG_CMD_FDC */
 
 
+/***************************************************/
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_FDC)
+
+cmd_tbl_t U_BOOT_CMD(FDC) = MK_CMD_ENTRY(
+	"fdcboot",	3,	1,	do_fdcboot,
+	"fdcboot - boot from floppy device\n",
+	"loadAddr drive\n"
+);
+#endif