* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/board/sc520_spunk/u-boot.lds b/board/sc520_spunk/u-boot.lds
index fbab9b8..da7ea18 100644
--- a/board/sc520_spunk/u-boot.lds
+++ b/board/sc520_spunk/u-boot.lds
@@ -1,3 +1,4 @@
+
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
@@ -26,60 +27,65 @@
ENTRY(_start)
SECTIONS
-{
+{
. = 0x387c0000; /* Where bootcode in the flash is mapped */
.text : { *(.text); }
-
- . = ALIGN(4);
- .rodata : { *(.rodata) }
- . = 0x400000; /* Ram data segment to use */
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = 0x400000; /* Ram data segment to use */
_i386boot_romdata_dest = ABSOLUTE(.);
- .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
- _i386boot_romdata_start = LOADADDR(.data);
+ .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
+ _i386boot_romdata_start = LOADADDR(.data);
- . = ALIGN(4);
- .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
- _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got);
+ . = ALIGN(4);
+ .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
+ _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got);
- . = ALIGN(4);
+ . = ALIGN(4);
_i386boot_bss_start = ABSOLUTE(.);
- .bss : { *(.bss) }
+ .bss : { *(.bss) }
_i386boot_bss_size = SIZEOF(.bss);
-
-
+
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
/* 16bit realmode trampoline code */
.realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) ) { *(.realmode) }
-
+
_i386boot_realmode = LOADADDR(.realmode);
_i386boot_realmode_size = SIZEOF(.realmode);
-
+
/* 16bit BIOS emulation code (just enough to boot Linux) */
.bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) }
-
+
_i386boot_bios = LOADADDR(.bios);
_i386boot_bios_size = SIZEOF(.bios);
-
+
/* The load addresses below assumes that the flash
* will be mapped so that 0x387f0000 == 0xffff0000
* at reset time
*
- * The fe00 and ff00 offsets of the start32 and start16
+ * The fe00 and ff00 offsets of the start32 and start16
* segments are arbitrary, the just have to be mapped
* at reset and the code have to fit.
* The fff0 offset of reset is important, however.
*/
-
-
+
+
. = 0xfffffe00;
- .start32 : AT (0x387ffe00) { *(.start32); }
-
+ .start32 : AT (0x387ffe00) { *(.start32); }
+
. = 0xff00;
- .start16 : AT (0x387fff00) { *(.start16); }
-
+ .start16 : AT (0x387fff00) { *(.start16); }
+
. = 0xfff0;
- .reset : AT (0x387ffff0) { *(.reset); }
+ .reset : AT (0x387ffff0) { *(.reset); }
_i386boot_end = (LOADADDR(.reset) + SIZEOF(.reset) );
}