* Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
* Patches by Kenneth Johansson, 25 Jun 2003:
- major rework of command structure
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index d5a637f..b359ec7 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -38,7 +38,6 @@
#include <commproc.h>
#include <i2c.h>
#include <command.h>
-#include <cmd_bsp.h>
#include <malloc.h>
#include <post.h>
@@ -73,9 +72,9 @@
/*
* SDRAM Initialization (offset 5 in UPM RAM)
*
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
*
*/
0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
@@ -121,9 +120,9 @@
/*
* SDRAM Initialization (offset 5 in UPM RAM)
*
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
*
*/
0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
@@ -132,7 +131,7 @@
*/
0x0E2DBC04, 0x10AF7C04, 0xF0AFFC00, 0xF0AFFC00,
0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
- _NOT_USED_,
+ _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
@@ -146,7 +145,7 @@
*/
0x0E29BC04, 0x10A77C00, 0xF0AFFC00, 0xF0AFFC00,
0xE1BAFC04, 0x1FF5FC47, /* last */
- _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
@@ -511,7 +510,7 @@
int i;
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-
+
gd->kbd_status = 0;
/* Read initial keyboard error code */
@@ -543,13 +542,13 @@
/*
* Read current keyboard state.
*
- * After the error reset it may take some time before the
- * keyboard PIC picks up a valid keyboard scan - the total
- * scan time is approx. 1.6 ms (information by Martin Rajek,
- * 28 Sep 2002). We read a couple of times for the keyboard
- * to stabilize, using a big enough delay.
- * 10 times should be enough. If the data is still changing,
- * we use what we get :-(
+ * After the error reset it may take some time before the
+ * keyboard PIC picks up a valid keyboard scan - the total
+ * scan time is approx. 1.6 ms (information by Martin Rajek,
+ * 28 Sep 2002). We read a couple of times for the keyboard
+ * to stabilize, using a big enough delay.
+ * 10 times should be enough. If the data is still changing,
+ * we use what we get :-(
*/
memset (tmp_data, 0xFF, KEYBD_DATALEN); /* impossible value */
@@ -849,6 +848,12 @@
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
+cmd_tbl_t U_BOOT_CMD(pic) = MK_CMD_ENTRY(
+ "pic", 4, 1, do_pic,
+ "pic - read and write PIC registers\n",
+ "read reg - read PIC register `reg'\n"
+ "pic write reg val - write value `val' to PIC register `reg'\n"
+);
/***********************************************************************
F* Function: int do_kbd (cmd_tbl_t *cmdtp, int flag,
@@ -902,6 +907,12 @@
return 0;
}
+cmd_tbl_t U_BOOT_CMD(kdb) = MK_CMD_ENTRY(
+ "kbd", 1, 1, do_kbd,
+ "kbd - read keyboard status\n",
+ NULL
+);
+
/* Read and set LSB switch */
#define CFG_PC_TXD1_ENA 0x0008 /* PC.12 */
@@ -968,6 +979,14 @@
return 1;
}
+cmd_tbl_t U_BOOT_CMD(lsb) = MK_CMD_ENTRY(
+ "lsb", 2, 1, do_lsb,
+ "lsb - check and set LSB switch\n",
+ "on - switch LSB on\n"
+ "lsb off - switch LSB off\n"
+ "lsb - print current setting\n"
+);
+
#endif /* CFG_CMD_BSP */
/*----------------------------- Utilities -----------------------------*/