ARMV7: Exynos4: Add support for TRATS board
This patch adds support for Samsung TRATS board
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
diff --git a/board/samsung/trats/Makefile b/board/samsung/trats/Makefile
new file mode 100644
index 0000000..d21883f
--- /dev/null
+++ b/board/samsung/trats/Makefile
@@ -0,0 +1,43 @@
+#
+# Copyright (C) 2011 Samsung Electronics
+# Heungjun Kim <riverful.kim@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y += trats.o
+
+SRCS := $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/trats/setup.h b/board/samsung/trats/setup.h
new file mode 100644
index 0000000..a479b5c
--- /dev/null
+++ b/board/samsung/trats/setup.h
@@ -0,0 +1,637 @@
+/*
+ * Machine Specific Values for TRATS board based on EXYNOS4210
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TRATS_SETUP_H
+#define _TRATS_SETUP_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/* CLK_SRC_CPU: APLL(1), MPLL(1), CORE(0), HPM(0) */
+#define MUX_HPM_SEL_MOUTAPLL 0x0
+#define MUX_HPM_SEL_SCLKMPLL 0x1
+#define MUX_CORE_SEL_MOUTAPLL 0x0
+#define MUX_CORE_SEL_SCLKMPLL 0x1
+#define MUX_MPLL_SEL_FILPLL 0x0
+#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1
+#define MUX_APLL_SEL_FILPLL 0x0
+#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \
+ | (MUX_CORE_SEL_MOUTAPLL << 16) \
+ | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
+ | (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
+
+/* CLK_DIV_CPU0 */
+#define APLL_RATIO 0x0
+#define PCLK_DBG_RATIO 0x1
+#define ATB_RATIO 0x3
+#define PERIPH_RATIO 0x3
+#define COREM1_RATIO 0x7
+#define COREM0_RATIO 0x3
+#define CORE_RATIO 0x0
+#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \
+ | (PCLK_DBG_RATIO << 20) \
+ | (ATB_RATIO << 16) \
+ | (PERIPH_RATIO << 12) \
+ | (COREM1_RATIO << 8) \
+ | (COREM0_RATIO << 4) \
+ | (CORE_RATIO << 0))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO 0x0
+#define COPY_RATIO 0x3
+#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO))
+
+/* CLK_DIV_DMC0 */
+#define CORE_TIMERS_RATIO 0x1
+#define COPY2_RATIO 0x3
+#define DMCP_RATIO 0x1
+#define DMCD_RATIO 0x1
+#define DMC_RATIO 0x1
+#define DPHY_RATIO 0x1
+#define ACP_PCLK_RATIO 0x1
+#define ACP_RATIO 0x3
+#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \
+ | (COPY2_RATIO << 24) \
+ | (DMCP_RATIO << 20) \
+ | (DMCD_RATIO << 16) \
+ | (DMC_RATIO << 12) \
+ | (DPHY_RATIO << 8) \
+ | (ACP_PCLK_RATIO << 4) \
+ | (ACP_RATIO << 0))
+
+/* CLK_DIV_DMC1 */
+#define DPM_RATIO 0x1
+#define DVSEM_RATIO 0x1
+#define PWI_RATIO 0x1
+#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \
+ | (DVSEM_RATIO << 16) \
+ | (PWI_RATIO << 8))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ONENAND_SEL_ACLK_133 0x0
+#define MUX_ONENAND_SEL_ACLK_160 0x1
+#define MUX_ACLK_133_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_133_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_160_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_160_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_100_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_100_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_200_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_200_SEL_SCLKAPLL 0x1
+#define MUX_VPLL_SEL_FINPLL 0x0
+#define MUX_VPLL_SEL_FOUTVPLL 0x1
+#define MUX_EPLL_SEL_FINPLL 0x0
+#define MUX_EPLL_SEL_FOUTEPLL 0x1
+#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0
+#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1
+#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_160 << 28) \
+ | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
+ | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
+ | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
+ | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
+ | (MUX_VPLL_SEL_FOUTVPLL << 8) \
+ | (MUX_EPLL_SEL_FOUTEPLL << 4) \
+ | (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
+
+/* CLK_DIV_TOP */
+#define ONENAND_RATIO 0x0
+#define ACLK_133_RATIO 0x5
+#define ACLK_160_RATIO 0x4
+#define ACLK_100_RATIO 0x7
+#define ACLK_200_RATIO 0x3
+#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \
+ | (ACLK_133_RATIO << 12)\
+ | (ACLK_160_RATIO << 8) \
+ | (ACLK_100_RATIO << 4) \
+ | (ACLK_200_RATIO << 0))
+
+/* CLK_DIV_LEFTBUS */
+#define GPL_RATIO 0x1
+#define GDL_RATIO 0x3
+#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO))
+
+/* CLK_DIV_RIGHTBUS */
+#define GPR_RATIO 0x1
+#define GDR_RATIO 0x3
+#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO))
+
+/* CLK_SRS_FSYS: 6 = SCLKMPLL */
+#define SATA_SEL_SCLKMPLL 0
+#define SATA_SEL_SCLKAPLL 1
+
+#define MMC_SEL_XXTI 0
+#define MMC_SEL_XUSBXTI 1
+#define MMC_SEL_SCLK_HDMI24M 2
+#define MMC_SEL_SCLK_USBPHY0 3
+#define MMC_SEL_SCLK_USBPHY1 4
+#define MMC_SEL_SCLK_HDMIPHY 5
+#define MMC_SEL_SCLKMPLL 6
+#define MMC_SEL_SCLKEPLL 7
+#define MMC_SEL_SCLKVPLL 8
+
+#define MMCC0_SEL MMC_SEL_SCLKMPLL
+#define MMCC1_SEL MMC_SEL_SCLKMPLL
+#define MMCC2_SEL MMC_SEL_SCLKMPLL
+#define MMCC3_SEL MMC_SEL_SCLKMPLL
+#define MMCC4_SEL MMC_SEL_SCLKMPLL
+#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \
+ | (MMCC4_SEL << 16) \
+ | (MMCC3_SEL << 12) \
+ | (MMCC2_SEL << 8) \
+ | (MMCC1_SEL << 4) \
+ | (MMCC0_SEL << 0))
+
+/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
+/* CLK_DIV_FSYS1: 800(MPLL) / (15 + 1) */
+#define MMC0_RATIO 0xF
+#define MMC0_PRE_RATIO 0x0
+#define MMC1_RATIO 0xF
+#define MMC1_PRE_RATIO 0x0
+#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \
+ | (MMC1_RATIO << 16) \
+ | (MMC0_PRE_RATIO << 8) \
+ | (MMC0_RATIO << 0))
+
+/* CLK_DIV_FSYS2: 800(MPLL) / (15 + 1) */
+#define MMC2_RATIO 0xF
+#define MMC2_PRE_RATIO 0x0
+#define MMC3_RATIO 0xF
+#define MMC3_PRE_RATIO 0x0
+#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \
+ | (MMC3_RATIO << 16) \
+ | (MMC2_PRE_RATIO << 8) \
+ | (MMC2_RATIO << 0))
+
+/* CLK_DIV_FSYS3: 800(MPLL) / (15 + 1) */
+#define MMC4_RATIO 0xF
+#define MMC4_PRE_RATIO 0x0
+#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \
+ | (MMC4_RATIO << 0))
+
+/* CLK_SRC_PERIL0 */
+#define UART_SEL_XXTI 0
+#define UART_SEL_XUSBXTI 1
+#define UART_SEL_SCLK_HDMI24M 2
+#define UART_SEL_SCLK_USBPHY0 3
+#define UART_SEL_SCLK_USBPHY1 4
+#define UART_SEL_SCLK_HDMIPHY 5
+#define UART_SEL_SCLKMPLL 6
+#define UART_SEL_SCLKEPLL 7
+#define UART_SEL_SCLKVPLL 8
+
+#define UART0_SEL UART_SEL_SCLKMPLL
+#define UART1_SEL UART_SEL_SCLKMPLL
+#define UART2_SEL UART_SEL_SCLKMPLL
+#define UART3_SEL UART_SEL_SCLKMPLL
+#define UART4_SEL UART_SEL_SCLKMPLL
+#define UART5_SEL UART_SEL_SCLKMPLL
+#define CLK_SRC_PERIL0_VAL ((UART5_SEL << 16) \
+ | (UART4_SEL << 12) \
+ | (UART3_SEL << 12) \
+ | (UART2_SEL << 8) \
+ | (UART1_SEL << 4) \
+ | (UART0_SEL << 0))
+
+/* SCLK_UART[0-4] = MOUTUART[0-4] / (UART[0-4]_RATIO + 1) */
+/* CLK_DIV_PERIL0 */
+#define UART0_RATIO 7
+#define UART1_RATIO 7
+#define UART2_RATIO 7
+#define UART3_RATIO 4
+#define UART4_RATIO 7
+#define UART5_RATIO 7
+#define CLK_DIV_PERIL0_VAL ((UART5_RATIO << 16) \
+ | (UART4_RATIO << 12) \
+ | (UART3_RATIO << 12) \
+ | (UART2_RATIO << 8) \
+ | (UART1_RATIO << 4) \
+ | (UART0_RATIO << 0))
+
+/* CLK_DIV_PERIL3 */
+#define SLIMBUS_RATIO 0x0
+#define PWM_RATIO 0x8
+#define CLK_DIV_PERIL3_VAL ((SLIMBUS_RATIO << 4) \
+ | (PWM_RATIO << 0))
+
+/* Required period to generate a stable clock output */
+/* PLL_LOCK_TIME */
+#define PLL_LOCKTIME 0x1C20
+
+/* PLL Values */
+#define DISABLE 0
+#define ENABLE 1
+#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\
+ | (mdiv << 16) \
+ | (pdiv << 8) \
+ | (sdiv << 0))
+
+/* APLL_CON0: 800MHz */
+#define APLL_MDIV 0xC8
+#define APLL_PDIV 0x6
+#define APLL_SDIV 0x1
+#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+
+/* APLL_CON1 */
+#define APLL_AFC_ENB 0x1
+#define APLL_AFC 0x1C
+#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
+
+/* MPLL_CON0: 800MHz */
+#define MPLL_MDIV 0xC8
+#define MPLL_PDIV 0x6
+#define MPLL_SDIV 0x1
+#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+
+/* MPLL_CON1 */
+#define MPLL_AFC_ENB 0x1
+#define MPLL_AFC 0x1C
+#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
+
+/* EPLL_CON0: 96MHz */
+#define EPLL_MDIV 0x30
+#define EPLL_PDIV 0x3
+#define EPLL_SDIV 0x2
+#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+
+/* EPLL_CON1 */
+#define EPLL_K 0x0
+#define EPLL_CON1_VAL (EPLL_K >> 0)
+
+/* VPLL_CON0: 108MHz */
+#define VPLL_MDIV 0x35
+#define VPLL_PDIV 0x3
+#define VPLL_SDIV 0x2
+#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+
+/* VPLL_CON1 */
+#define VPLL_SSCG_EN DISABLE
+#define VPLL_SEL_PF_DN_SPREAD 0x0
+#define VPLL_MRR 0x11
+#define VPLL_MFR 0x0
+#define VPLL_K 0x400
+#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\
+ | (VPLL_SEL_PF_DN_SPREAD << 29) \
+ | (VPLL_MRR << 24) \
+ | (VPLL_MFR << 16) \
+ | (VPLL_K << 0))
+
+/* CLOCK GATE */
+#define CLK_DIS 0x0
+#define CLK_EN 0x1
+
+#define BIT_CAM_CLK_PIXELASYNCM1 18
+#define BIT_CAM_CLK_PIXELASYNCM0 17
+#define BIT_CAM_CLK_PPMUCAMIF 16
+#define BIT_CAM_CLK_QEFIMC3 15
+#define BIT_CAM_CLK_QEFIMC2 14
+#define BIT_CAM_CLK_QEFIMC1 13
+#define BIT_CAM_CLK_QEFIMC0 12
+#define BIT_CAM_CLK_SMMUJPEG 11
+#define BIT_CAM_CLK_SMMUFIMC3 10
+#define BIT_CAM_CLK_SMMUFIMC2 9
+#define BIT_CAM_CLK_SMMUFIMC1 8
+#define BIT_CAM_CLK_SMMUFIMC0 7
+#define BIT_CAM_CLK_JPEG 6
+#define BIT_CAM_CLK_CSIS1 5
+#define BIT_CAM_CLK_CSIS0 4
+#define BIT_CAM_CLK_FIMC3 3
+#define BIT_CAM_CLK_FIMC2 2
+#define BIT_CAM_CLK_FIMC1 1
+#define BIT_CAM_CLK_FIMC0 0
+#define CLK_GATE_IP_CAM_ALL_EN ((CLK_EN << BIT_CAM_CLK_PIXELASYNCM1)\
+ | (CLK_EN << BIT_CAM_CLK_PIXELASYNCM0)\
+ | (CLK_EN << BIT_CAM_CLK_PPMUCAMIF)\
+ | (CLK_EN << BIT_CAM_CLK_QEFIMC3)\
+ | (CLK_EN << BIT_CAM_CLK_QEFIMC2)\
+ | (CLK_EN << BIT_CAM_CLK_QEFIMC1)\
+ | (CLK_EN << BIT_CAM_CLK_QEFIMC0)\
+ | (CLK_EN << BIT_CAM_CLK_SMMUJPEG)\
+ | (CLK_EN << BIT_CAM_CLK_SMMUFIMC3)\
+ | (CLK_EN << BIT_CAM_CLK_SMMUFIMC2)\
+ | (CLK_EN << BIT_CAM_CLK_SMMUFIMC1)\
+ | (CLK_EN << BIT_CAM_CLK_SMMUFIMC0)\
+ | (CLK_EN << BIT_CAM_CLK_JPEG)\
+ | (CLK_EN << BIT_CAM_CLK_CSIS1)\
+ | (CLK_EN << BIT_CAM_CLK_CSIS0)\
+ | (CLK_EN << BIT_CAM_CLK_FIMC3)\
+ | (CLK_EN << BIT_CAM_CLK_FIMC2)\
+ | (CLK_EN << BIT_CAM_CLK_FIMC1)\
+ | (CLK_EN << BIT_CAM_CLK_FIMC0))
+#define CLK_GATE_IP_CAM_ALL_DIS ~CLK_GATE_IP_CAM_ALL_EN
+
+#define BIT_VP_CLK_PPMUTV 5
+#define BIT_VP_CLK_SMMUTV 4
+#define BIT_VP_CLK_HDMI 3
+#define BIT_VP_CLK_TVENC 2
+#define BIT_VP_CLK_MIXER 1
+#define BIT_VP_CLK_VP 0
+#define CLK_GATE_IP_VP_ALL_EN ((CLK_EN << BIT_VP_CLK_PPMUTV)\
+ | (CLK_EN << BIT_VP_CLK_SMMUTV)\
+ | (CLK_EN << BIT_VP_CLK_HDMI)\
+ | (CLK_EN << BIT_VP_CLK_TVENC)\
+ | (CLK_EN << BIT_VP_CLK_MIXER)\
+ | (CLK_EN << BIT_VP_CLK_VP))
+#define CLK_GATE_IP_VP_ALL_DIS ~CLK_GATE_IP_VP_ALL_EN
+
+#define BIT_MFC_CLK_PPMUMFC_R 4
+#define BIT_MFC_CLK_PPMUMFC_L 3
+#define BIT_MFC_CLK_SMMUMFC_R 2
+#define BIT_MFC_CLK_SMMUMFC_L 1
+#define BIT_MFC_CLK_MFC 0
+#define CLK_GATE_IP_MFC_ALL_EN ((CLK_EN << BIT_MFC_CLK_PPMUMFC_R)\
+ | (CLK_EN << BIT_MFC_CLK_PPMUMFC_L)\
+ | (CLK_EN << BIT_MFC_CLK_SMMUMFC_R)\
+ | (CLK_EN << BIT_MFC_CLK_SMMUMFC_L)\
+ | (CLK_EN << BIT_MFC_CLK_MFC))
+#define CLK_GATE_IP_MFC_ALL_DIS ~CLK_GATE_IP_MFC_ALL_EN
+
+#define BIT_G3D_CLK_QEG3D 2
+#define BIT_G3D_CLK_PPMUG3D 1
+#define BIT_G3D_CLK_G3D 0
+#define CLK_GATE_IP_G3D_ALL_EN ((CLK_EN << BIT_G3D_CLK_QEG3D)\
+ | (CLK_EN << BIT_G3D_CLK_PPMUG3D)\
+ | (CLK_EN << BIT_G3D_CLK_G3D))
+#define CLK_GATE_IP_G3D_ALL_DIS ~CLK_GATE_IP_G3D_ALL_EN
+
+#define BIT_IMAGE_CLK_PPMUIMAGE 9
+#define BIT_IMAGE_CLK_QEMDMA 8
+#define BIT_IMAGE_CLK_QEROTATOR 7
+#define BIT_IMAGE_CLK_QEG2D 6
+#define BIT_IMAGE_CLK_SMMUMDMA 5
+#define BIT_IMAGE_CLK_SMMUROTATOR 4
+#define BIT_IMAGE_CLK_SMMUG2D 3
+#define BIT_IMAGE_CLK_MDMA 2
+#define BIT_IMAGE_CLK_ROTATOR 1
+#define BIT_IMAGE_CLK_G2D 0
+#define CLK_GATE_IP_IMAGE_ALL_EN ((CLK_EN << BIT_IMAGE_CLK_PPMUIMAGE)\
+ | (CLK_EN << BIT_IMAGE_CLK_QEMDMA)\
+ | (CLK_EN << BIT_IMAGE_CLK_QEROTATOR)\
+ | (CLK_EN << BIT_IMAGE_CLK_QEG2D)\
+ | (CLK_EN << BIT_IMAGE_CLK_SMMUMDMA)\
+ | (CLK_EN << BIT_IMAGE_CLK_SMMUROTATOR)\
+ | (CLK_EN << BIT_IMAGE_CLK_SMMUG2D)\
+ | (CLK_EN << BIT_IMAGE_CLK_MDMA)\
+ | (CLK_EN << BIT_IMAGE_CLK_ROTATOR)\
+ | (CLK_EN << BIT_IMAGE_CLK_G2D))
+#define CLK_GATE_IP_IMAGE_ALL_DIS ~CLK_GATE_IP_IMAGE_ALL_EN
+
+#define BIT_LCD0_CLK_PPMULCD0 5
+#define BIT_LCD0_CLK_SMMUFIMD0 4
+#define BIT_LCD0_CLK_DSIM0 3
+#define BIT_LCD0_CLK_MDNIE0 2
+#define BIT_LCD0_CLK_MIE0 1
+#define BIT_LCD0_CLK_FIMD0 0
+#define CLK_GATE_IP_LCD0_ALL_EN ((CLK_EN << BIT_LCD0_CLK_PPMULCD0)\
+ | (CLK_EN << BIT_LCD0_CLK_SMMUFIMD0)\
+ | (CLK_EN << BIT_LCD0_CLK_DSIM0)\
+ | (CLK_EN << BIT_LCD0_CLK_MDNIE0)\
+ | (CLK_EN << BIT_LCD0_CLK_MIE0)\
+ | (CLK_EN << BIT_LCD0_CLK_FIMD0))
+#define CLK_GATE_IP_LCD0_ALL_DIS ~CLK_GATE_IP_LCD0_ALL_EN
+
+#define BIT_LCD1_CLK_PPMULCD1 5
+#define BIT_LCD1_CLK_SMMUFIMD1 4
+#define BIT_LCD1_CLK_DSIM1 3
+#define BIT_LCD1_CLK_MDNIE1 2
+#define BIT_LCD1_CLK_MIE1 1
+#define BIT_LCD1_CLK_FIMD1 0
+#define CLK_GATE_IP_LCD1_ALL_EN ((CLK_EN << BIT_LCD1_CLK_PPMULCD1)\
+ | (CLK_EN << BIT_LCD1_CLK_SMMUFIMD1)\
+ | (CLK_EN << BIT_LCD1_CLK_DSIM1)\
+ | (CLK_EN << BIT_LCD1_CLK_MDNIE1)\
+ | (CLK_EN << BIT_LCD1_CLK_MIE1)\
+ | (CLK_EN << BIT_LCD1_CLK_FIMD1))
+#define CLK_GATE_IP_LCD1_ALL_DIS ~CLK_GATE_IP_LCD1_ALL_EN
+
+#define BIT_FSYS_CLK_SMMUPCIE 18
+#define BIT_FSYS_CLK_PPMUFILE 17
+#define BIT_FSYS_CLK_NFCON 16
+#define BIT_FSYS_CLK_ONENAND 15
+#define BIT_FSYS_CLK_PCIE 14
+#define BIT_FSYS_CLK_USBDEVICE 13
+#define BIT_FSYS_CLK_USBHOST 12
+#define BIT_FSYS_CLK_SROMC 11
+#define BIT_FSYS_CLK_SATA 10
+#define BIT_FSYS_CLK_SDMMC4 9
+#define BIT_FSYS_CLK_SDMMC3 8
+#define BIT_FSYS_CLK_SDMMC2 7
+#define BIT_FSYS_CLK_SDMMC1 6
+#define BIT_FSYS_CLK_SDMMC0 5
+#define BIT_FSYS_CLK_TSI 4
+#define BIT_FSYS_CLK_SATAPHY 3
+#define BIT_FSYS_CLK_PCIEPHY 2
+#define BIT_FSYS_CLK_PDMA1 1
+#define BIT_FSYS_CLK_PDMA0 0
+#define CLK_GATE_IP_FSYS_ALL_EN ((CLK_EN << BIT_FSYS_CLK_SMMUPCIE)\
+ | (CLK_EN << BIT_FSYS_CLK_PPMUFILE)\
+ | (CLK_EN << BIT_FSYS_CLK_NFCON)\
+ | (CLK_EN << BIT_FSYS_CLK_ONENAND)\
+ | (CLK_EN << BIT_FSYS_CLK_PCIE)\
+ | (CLK_EN << BIT_FSYS_CLK_USBDEVICE)\
+ | (CLK_EN << BIT_FSYS_CLK_USBHOST)\
+ | (CLK_EN << BIT_FSYS_CLK_SROMC)\
+ | (CLK_EN << BIT_FSYS_CLK_SATA)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC4)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC3)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC2)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC1)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC0)\
+ | (CLK_EN << BIT_FSYS_CLK_TSI)\
+ | (CLK_EN << BIT_FSYS_CLK_SATAPHY)\
+ | (CLK_EN << BIT_FSYS_CLK_PCIEPHY)\
+ | (CLK_EN << BIT_FSYS_CLK_PDMA1)\
+ | (CLK_EN << BIT_FSYS_CLK_PDMA0))
+#define CLK_GATE_IP_FSYS_ALL_DIS ~CLK_GATE_IP_FSYS_ALL_EN
+
+#define BIT_GPS_CLK_SMMUGPS 1
+#define BIT_GPS_CLK_GPS 0
+#define CLK_GATE_IP_GPS_ALL_EN ((CLK_EN << BIT_GPS_CLK_SMMUGPS)\
+ | (CLK_EN << BIT_GPS_CLK_GPS))
+#define CLK_GATE_IP_GPS_ALL_DIS ~CLK_GATE_IP_GPS_ALL_EN
+
+#define BIT_PERIL_CLK_MODEMIF 28
+#define BIT_PERIL_CLK_AC97 27
+#define BIT_PERIL_CLK_SPDIF 26
+#define BIT_PERIL_CLK_SLIMBUS 25
+#define BIT_PERIL_CLK_PWM 24
+#define BIT_PERIL_CLK_PCM2 23
+#define BIT_PERIL_CLK_PCM1 22
+#define BIT_PERIL_CLK_I2S2 21
+#define BIT_PERIL_CLK_I2S1 20
+#define BIT_PERIL_CLK_RESERVED0 19
+#define BIT_PERIL_CLK_SPI2 18
+#define BIT_PERIL_CLK_SPI1 17
+#define BIT_PERIL_CLK_SPI0 16
+#define BIT_PERIL_CLK_TSADC 15
+#define BIT_PERIL_CLK_I2CHDMI 14
+#define BIT_PERIL_CLK_I2C7 13
+#define BIT_PERIL_CLK_I2C6 12
+#define BIT_PERIL_CLK_I2C5 11
+#define BIT_PERIL_CLK_I2C4 10
+#define BIT_PERIL_CLK_I2C3 9
+#define BIT_PERIL_CLK_I2C2 8
+#define BIT_PERIL_CLK_I2C1 7
+#define BIT_PERIL_CLK_I2C0 6
+#define BIT_PERIL_CLK_RESERVED1 5
+#define BIT_PERIL_CLK_UART4 4
+#define BIT_PERIL_CLK_UART3 3
+#define BIT_PERIL_CLK_UART2 2
+#define BIT_PERIL_CLK_UART1 1
+#define BIT_PERIL_CLK_UART0 0
+#define CLK_GATE_IP_PERIL_ALL_EN ((CLK_EN << BIT_PERIL_CLK_MODEMIF)\
+ | (CLK_EN << BIT_PERIL_CLK_AC97)\
+ | (CLK_EN << BIT_PERIL_CLK_SPDIF)\
+ | (CLK_EN << BIT_PERIL_CLK_SLIMBUS)\
+ | (CLK_EN << BIT_PERIL_CLK_PWM)\
+ | (CLK_EN << BIT_PERIL_CLK_PCM2)\
+ | (CLK_EN << BIT_PERIL_CLK_PCM1)\
+ | (CLK_EN << BIT_PERIL_CLK_I2S2)\
+ | (CLK_EN << BIT_PERIL_CLK_I2S1)\
+ | (CLK_EN << BIT_PERIL_CLK_RESERVED0)\
+ | (CLK_EN << BIT_PERIL_CLK_SPI2)\
+ | (CLK_EN << BIT_PERIL_CLK_SPI1)\
+ | (CLK_EN << BIT_PERIL_CLK_SPI0)\
+ | (CLK_EN << BIT_PERIL_CLK_TSADC)\
+ | (CLK_EN << BIT_PERIL_CLK_I2CHDMI)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C7)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C6)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C5)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C4)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C3)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C2)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C1)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C0)\
+ | (CLK_EN << BIT_PERIL_CLK_RESERVED1)\
+ | (CLK_EN << BIT_PERIL_CLK_UART4)\
+ | (CLK_EN << BIT_PERIL_CLK_UART3)\
+ | (CLK_EN << BIT_PERIL_CLK_UART2)\
+ | (CLK_EN << BIT_PERIL_CLK_UART1)\
+ | (CLK_EN << BIT_PERIL_CLK_UART0))
+#define CLK_GATE_IP_PERIL_ALL_DIS ~CLK_GATE_IP_PERIL_ALL_EN
+
+#define BIT_PERIR_CLK_TMU_APBIF 17
+#define BIT_PERIR_CLK_KEYIF 16
+#define BIT_PERIR_CLK_RTC 15
+#define BIT_PERIR_CLK_WDT 14
+#define BIT_PERIR_CLK_MCT 13
+#define BIT_PERIR_CLK_SECKEY 12
+#define BIT_PERIR_CLK_HDMI_CEC 11
+#define BIT_PERIR_CLK_TZPC5 10
+#define BIT_PERIR_CLK_TZPC4 9
+#define BIT_PERIR_CLK_TZPC3 8
+#define BIT_PERIR_CLK_TZPC2 7
+#define BIT_PERIR_CLK_TZPC1 6
+#define BIT_PERIR_CLK_TZPC0 5
+#define BIT_PERIR_CLK_CMU_DMCPART 4
+#define BIT_PERIR_CLK_RESERVED 3
+#define BIT_PERIR_CLK_CMU_APBIF 2
+#define BIT_PERIR_CLK_SYSREG 1
+#define BIT_PERIR_CLK_CHIP_ID 0
+#define CLK_GATE_IP_PERIR_ALL_EN ((CLK_EN << BIT_PERIR_CLK_TMU_APBIF)\
+ | (CLK_EN << BIT_PERIR_CLK_KEYIF)\
+ | (CLK_EN << BIT_PERIR_CLK_RTC)\
+ | (CLK_EN << BIT_PERIR_CLK_WDT)\
+ | (CLK_EN << BIT_PERIR_CLK_MCT)\
+ | (CLK_EN << BIT_PERIR_CLK_SECKEY)\
+ | (CLK_EN << BIT_PERIR_CLK_HDMI_CEC)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC5)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC4)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC3)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC2)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC1)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC0)\
+ | (CLK_EN << BIT_PERIR_CLK_CMU_DMCPART)\
+ | (CLK_EN << BIT_PERIR_CLK_RESERVED)\
+ | (CLK_EN << BIT_PERIR_CLK_CMU_APBIF)\
+ | (CLK_EN << BIT_PERIR_CLK_SYSREG)\
+ | (CLK_EN << BIT_PERIR_CLK_CHIP_ID))
+#define CLK_GATE_IP_PERIR_ALL_DIS ~CLK_GATE_IP_PERIR_ALL_EN
+
+#define BIT_BLOCK_CLK_GPS 7
+#define BIT_BLOCK_CLK_RESERVED 6
+#define BIT_BLOCK_CLK_LCD1 5
+#define BIT_BLOCK_CLK_LCD0 4
+#define BIT_BLOCK_CLK_G3D 3
+#define BIT_BLOCK_CLK_MFC 2
+#define BIT_BLOCK_CLK_TV 1
+#define BIT_BLOCK_CLK_CAM 0
+#define CLK_GATE_BLOCK_ALL_EN ((CLK_EN << BIT_BLOCK_CLK_GPS)\
+ | (CLK_EN << BIT_BLOCK_CLK_RESERVED)\
+ | (CLK_EN << BIT_BLOCK_CLK_LCD1)\
+ | (CLK_EN << BIT_BLOCK_CLK_LCD0)\
+ | (CLK_EN << BIT_BLOCK_CLK_G3D)\
+ | (CLK_EN << BIT_BLOCK_CLK_MFC)\
+ | (CLK_EN << BIT_BLOCK_CLK_TV)\
+ | (CLK_EN << BIT_BLOCK_CLK_CAM))
+#define CLK_GATE_BLOCK_ALL_DIS ~CLK_GATE_BLOCK_ALL_EN
+
+/*
+ * GATE CAM : All block
+ * GATE VP : All block
+ * GATE MFC : All block
+ * GATE G3D : All block
+ * GATE IMAGE : All block
+ * GATE LCD0 : All block
+ * GATE LCD1 : All block
+ * GATE FSYS : Enable - PDMA0,1, SDMMC0,2, USBHOST, USBDEVICE, PPMUFILE
+ * GATE GPS : All block
+ * GATE PERI Left : All Enable, Block - SLIMBUS, SPDIF, AC97
+ * GATE PERI Right : All Enable, Block - KEYIF
+ * GATE Block : All block
+ */
+#define CLK_GATE_IP_CAM_VAL CLK_GATE_IP_CAM_ALL_DIS
+#define CLK_GATE_IP_VP_VAL CLK_GATE_IP_VP_ALL_DIS
+#define CLK_GATE_IP_MFC_VAL CLK_GATE_IP_MFC_ALL_DIS
+#define CLK_GATE_IP_G3D_VAL CLK_GATE_IP_G3D_ALL_DIS
+#define CLK_GATE_IP_IMAGE_VAL CLK_GATE_IP_IMAGE_ALL_DIS
+#define CLK_GATE_IP_LCD0_VAL CLK_GATE_IP_LCD0_ALL_DIS
+#define CLK_GATE_IP_LCD1_VAL CLK_GATE_IP_LCD1_ALL_DIS
+#define CLK_GATE_IP_FSYS_VAL (CLK_GATE_IP_FSYS_ALL_DIS \
+ | (CLK_EN << BIT_FSYS_CLK_PPMUFILE)\
+ | (CLK_EN << BIT_FSYS_CLK_USBDEVICE)\
+ | (CLK_EN << BIT_FSYS_CLK_USBHOST)\
+ | (CLK_EN << BIT_FSYS_CLK_SROMC)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC2)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC0)\
+ | (CLK_EN << BIT_FSYS_CLK_PDMA1)\
+ | (CLK_EN << BIT_FSYS_CLK_PDMA0))
+#define CLK_GATE_IP_GPS_VAL CLK_GATE_IP_GPS_ALL_DIS
+#define CLK_GATE_IP_PERIL_VAL (CLK_GATE_IP_PERIL_ALL_DIS \
+ | ~((CLK_EN << BIT_PERIL_CLK_AC97)\
+ | (CLK_EN << BIT_PERIL_CLK_SPDIF)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C2)\
+ | (CLK_EN << BIT_PERIL_CLK_SLIMBUS)))
+#define CLK_GATE_IP_PERIR_VAL (CLK_GATE_IP_PERIR_ALL_DIS \
+ | ~((CLK_EN << BIT_PERIR_CLK_KEYIF)))
+#define CLK_GATE_BLOCK_VAL CLK_GATE_BLOCK_ALL_DIS
+
+/* PS_HOLD: Data Hight, Output En */
+#define BIT_DAT 8
+#define BIT_EN 9
+#define EXYNOS4_PS_HOLD_CON_VAL (0x1 << BIT_DAT | 0x1 << BIT_EN)
+
+#endif
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
new file mode 100644
index 0000000..2925cff
--- /dev/null
+++ b/board/samsung/trats/trats.c
@@ -0,0 +1,379 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/watchdog.h>
+#include <asm/arch/power.h>
+#include <pmic.h>
+#include <usb/s3c_udc.h>
+#include <max8998_pmic.h>
+
+#include "setup.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int board_rev;
+
+#ifdef CONFIG_REVISION_TAG
+u32 get_board_rev(void)
+{
+ return board_rev;
+}
+#endif
+
+static void check_hw_revision(void);
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ check_hw_revision();
+ printf("HW Revision:\t0x%x\n", board_rev);
+
+#if defined(CONFIG_PMIC)
+ pmic_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
+static unsigned int get_hw_revision(void)
+{
+ struct exynos4_gpio_part1 *gpio =
+ (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+ int hwrev = 0;
+ int i;
+
+ /* hw_rev[3:0] == GPE1[3:0] */
+ for (i = 0; i < 4; i++) {
+ s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
+ s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
+ }
+
+ udelay(1);
+
+ for (i = 0; i < 4; i++)
+ hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
+
+ debug("hwrev 0x%x\n", hwrev);
+
+ return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+ int hwrev;
+
+ hwrev = get_hw_revision();
+
+ board_rev |= hwrev;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ puts("Board:\tTRATS\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ struct exynos4_gpio_part2 *gpio =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+ int i, err;
+
+ /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
+ s5p_gpio_direction_output(&gpio->k0, 2, 1);
+ s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
+
+ /*
+ * eMMC GPIO:
+ * SDR 8-bit@48MHz at MMC0
+ * GPK0[0] SD_0_CLK(2)
+ * GPK0[1] SD_0_CMD(2)
+ * GPK0[2] SD_0_CDn -> Not used
+ * GPK0[3:6] SD_0_DATA[0:3](2)
+ * GPK1[3:6] SD_0_DATA[0:3](3)
+ *
+ * DDR 4-bit@26MHz at MMC4
+ * GPK0[0] SD_4_CLK(3)
+ * GPK0[1] SD_4_CMD(3)
+ * GPK0[2] SD_4_CDn -> Not used
+ * GPK0[3:6] SD_4_DATA[0:3](3)
+ * GPK1[3:6] SD_4_DATA[4:7](4)
+ */
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ /* GPK0[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio->k0, i, 0x2);
+ /* GPK0[0:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE);
+ /* GPK0[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X);
+ }
+
+ for (i = 3; i < 7; i++) {
+ /* GPK1[3:6] special function 3 */
+ s5p_gpio_cfg_pin(&gpio->k1, i, 0x3);
+ /* GPK1[3:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE);
+ /* GPK1[3:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X);
+ }
+
+ /*
+ * MMC device init
+ * mmc0 : eMMC (8-bit buswidth)
+ * mmc2 : SD card (4-bit buswidth)
+ */
+ err = s5p_mmc_init(0, 8);
+
+ /* T-flash detect */
+ s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
+ s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP);
+
+ /*
+ * Check the T-flash detect pin
+ * GPX3[4] T-flash detect pin
+ */
+ if (!s5p_gpio_get_value(&gpio->x3, 4)) {
+ /*
+ * SD card GPIO:
+ * GPK2[0] SD_2_CLK(2)
+ * GPK2[1] SD_2_CMD(2)
+ * GPK2[2] SD_2_CDn -> Not used
+ * GPK2[3:6] SD_2_DATA[0:3](2)
+ */
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ /* GPK2[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio->k2, i, 0x2);
+ /* GPK2[0:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE);
+ /* GPK2[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X);
+ }
+ err = s5p_mmc_init(2, 4);
+ }
+
+ return err;
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc210_phy_control(int on)
+{
+ int ret = 0;
+ struct pmic *p = get_pmic();
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (on) {
+ ret |= pmic_set_output(p,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_SAFEOUT1, LDO_ON);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_ON);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_ON);
+
+ } else {
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_OFF);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_OFF);
+ ret |= pmic_set_output(p,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_SAFEOUT1, LDO_OFF);
+ }
+
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+struct s3c_plat_otg_data s5pc210_otg_data = {
+ .phy_control = s5pc210_phy_control,
+ .regs_phy = EXYNOS4_USBPHY_BASE,
+ .regs_otg = EXYNOS4_USBOTG_BASE,
+ .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
+ .usb_flags = PHY0_SLEEP,
+};
+#endif
+
+static void pmic_reset(void)
+{
+ struct exynos4_gpio_part2 *gpio =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+
+ s5p_gpio_direction_output(&gpio->x0, 7, 1);
+ s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE);
+}
+
+static void board_clock_init(void)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+
+ writel(CLK_SRC_CPU_VAL, (unsigned int)&clk->src_cpu);
+ writel(CLK_SRC_TOP0_VAL, (unsigned int)&clk->src_top0);
+ writel(CLK_SRC_FSYS_VAL, (unsigned int)&clk->src_fsys);
+ writel(CLK_SRC_PERIL0_VAL, (unsigned int)&clk->src_peril0);
+
+ writel(CLK_DIV_CPU0_VAL, (unsigned int)&clk->div_cpu0);
+ writel(CLK_DIV_CPU1_VAL, (unsigned int)&clk->div_cpu1);
+ writel(CLK_DIV_DMC0_VAL, (unsigned int)&clk->div_dmc0);
+ writel(CLK_DIV_DMC1_VAL, (unsigned int)&clk->div_dmc1);
+ writel(CLK_DIV_LEFTBUS_VAL, (unsigned int)&clk->div_leftbus);
+ writel(CLK_DIV_RIGHTBUS_VAL, (unsigned int)&clk->div_rightbus);
+ writel(CLK_DIV_TOP_VAL, (unsigned int)&clk->div_top);
+ writel(CLK_DIV_FSYS1_VAL, (unsigned int)&clk->div_fsys1);
+ writel(CLK_DIV_FSYS2_VAL, (unsigned int)&clk->div_fsys2);
+ writel(CLK_DIV_FSYS3_VAL, (unsigned int)&clk->div_fsys3);
+ writel(CLK_DIV_PERIL0_VAL, (unsigned int)&clk->div_peril0);
+ writel(CLK_DIV_PERIL3_VAL, (unsigned int)&clk->div_peril3);
+
+ writel(PLL_LOCKTIME, (unsigned int)&clk->apll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->mpll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->epll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->vpll_lock);
+ writel(APLL_CON1_VAL, (unsigned int)&clk->apll_con1);
+ writel(APLL_CON0_VAL, (unsigned int)&clk->apll_con0);
+ writel(MPLL_CON1_VAL, (unsigned int)&clk->mpll_con1);
+ writel(MPLL_CON0_VAL, (unsigned int)&clk->mpll_con0);
+ writel(EPLL_CON1_VAL, (unsigned int)&clk->epll_con1);
+ writel(EPLL_CON0_VAL, (unsigned int)&clk->epll_con0);
+ writel(VPLL_CON1_VAL, (unsigned int)&clk->vpll_con1);
+ writel(VPLL_CON0_VAL, (unsigned int)&clk->vpll_con0);
+
+ writel(CLK_GATE_IP_CAM_VAL, (unsigned int)&clk->gate_ip_cam);
+ writel(CLK_GATE_IP_VP_VAL, (unsigned int)&clk->gate_ip_tv);
+ writel(CLK_GATE_IP_MFC_VAL, (unsigned int)&clk->gate_ip_mfc);
+ writel(CLK_GATE_IP_G3D_VAL, (unsigned int)&clk->gate_ip_g3d);
+ writel(CLK_GATE_IP_IMAGE_VAL, (unsigned int)&clk->gate_ip_image);
+ writel(CLK_GATE_IP_LCD0_VAL, (unsigned int)&clk->gate_ip_lcd0);
+ writel(CLK_GATE_IP_LCD1_VAL, (unsigned int)&clk->gate_ip_lcd1);
+ writel(CLK_GATE_IP_FSYS_VAL, (unsigned int)&clk->gate_ip_fsys);
+ writel(CLK_GATE_IP_GPS_VAL, (unsigned int)&clk->gate_ip_gps);
+ writel(CLK_GATE_IP_PERIL_VAL, (unsigned int)&clk->gate_ip_peril);
+ writel(CLK_GATE_IP_PERIR_VAL, (unsigned int)&clk->gate_ip_perir);
+ writel(CLK_GATE_BLOCK_VAL, (unsigned int)&clk->gate_block);
+}
+
+static void board_watchdog_disable(void)
+{
+ struct exynos4_watchdog *wd =
+ (struct exynos4_watchdog *)samsung_get_base_watchdog();
+
+ writel(~(WTCON_EN | WTCON_INT), (unsigned int)&wd->wtcon);
+}
+
+static void board_power_init(void)
+{
+ struct exynos4_power *pwr =
+ (struct exynos4_power *)samsung_get_base_power();
+
+ /* PS HOLD */
+ writel(EXYNOS4_PS_HOLD_CON_VAL, (unsigned int)&pwr->ps_hold_control);
+
+ /* Set power down */
+ writel(0, (unsigned int)&pwr->cam_configuration);
+ writel(0, (unsigned int)&pwr->tv_configuration);
+ writel(0, (unsigned int)&pwr->mfc_configuration);
+ writel(0, (unsigned int)&pwr->g3d_configuration);
+ writel(0, (unsigned int)&pwr->lcd1_configuration);
+ writel(0, (unsigned int)&pwr->gps_configuration);
+ writel(0, (unsigned int)&pwr->gps_alive_configuration);
+}
+
+static void board_uart_init(void)
+{
+ struct exynos4_gpio_part1 *gpio1 =
+ (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+ struct exynos4_gpio_part2 *gpio2 =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+ int i;
+
+ /* UART0-UART1 GPIOs (part1) : 0x22222222 */
+ for (i = 0; i < 7; i++) {
+ s5p_gpio_set_pull(&gpio1->a0, i, GPIO_PULL_NONE);
+ s5p_gpio_cfg_pin(&gpio1->a0, i, GPIO_FUNC(0x2));
+ }
+
+ /*
+ * UART2-UART3 GPIOs (part2) : 0x00223322
+ * GPA1CON[3] = I2C_3_SCL (3)
+ * GPA1CON[2] = I2C_3_SDA (3)
+ */
+ for (i = 0; i < 5; i++) {
+ s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
+ s5p_gpio_cfg_pin(&gpio1->a1, i,
+ GPIO_FUNC((i == 2 || i == 3) ? 0x3 : 0x2));
+ }
+
+ /* UART_SEL GPY4[7] (part2) at EXYNOS4 */
+ s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
+ s5p_gpio_direction_output(&gpio2->y4, 7, 1);
+}
+
+int board_early_init_f(void)
+{
+ board_watchdog_disable();
+
+ pmic_reset();
+ board_clock_init();
+ board_uart_init();
+ board_power_init();
+
+ return 0;
+}